#ifndef __PLAT_GPIO_H
#define __PLAT_GPIO_H

struct irq_data;

/*
 * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
 * one set of registers. The register offsets are organized below:
 *
 *           GPLR    GPDR    GPSR    GPCR    GRER    GFER    GEDR
 * BANK 0 - 0x0000  0x000C  0x0018  0x0024  0x0030  0x003C  0x0048
 * BANK 1 - 0x0004  0x0010  0x001C  0x0028  0x0034  0x0040  0x004C
 * BANK 2 - 0x0008  0x0014  0x0020  0x002C  0x0038  0x0044  0x0050
 *
 * BANK 3 - 0x0100  0x010C  0x0118  0x0124  0x0130  0x013C  0x0148
 * BANK 4 - 0x0104  0x0110  0x011C  0x0128  0x0134  0x0140  0x014C
 * BANK 5 - 0x0108  0x0114  0x0120  0x012C  0x0138  0x0144  0x0150
 *
 * NOTE:
 *   BANK 3 is only available on PXA27x and later processors.
 *   BANK 4 and 5 are only available on PXA935
 */

#define GPIO_BANK(n)	(GPIO_REGS_VIRT + BANK_OFF(n))

#define GPLR_OFFSET	0x00
#define GPDR_OFFSET	0x0C
#define GPSR_OFFSET	0x18
#define GPCR_OFFSET	0x24
#define GRER_OFFSET	0x30
#define GFER_OFFSET	0x3C
#define GEDR_OFFSET	0x48

static inline int gpio_get_value(unsigned gpio)
{
	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
		return GPLR(gpio) & GPIO_bit(gpio);
	else
		return __gpio_get_value(gpio);
}

static inline void gpio_set_value(unsigned gpio, int value)
{
	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
		if (value)
			GPSR(gpio) = GPIO_bit(gpio);
		else
			GPCR(gpio) = GPIO_bit(gpio);
	} else
		__gpio_set_value(gpio, value);
}

#define gpio_cansleep		__gpio_cansleep

/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
 * Those cases currently cause holes in the GPIO number space, the
 * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
 */
extern int pxa_last_gpio;

typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);

extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
#endif /* __PLAT_GPIO_H */