From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- arch/arm/plat-omap/include/plat/serial.h | 117 +++++++++++++++++++++++++++++++ 1 file changed, 117 insertions(+) create mode 100644 arch/arm/plat-omap/include/plat/serial.h (limited to 'arch/arm/plat-omap/include/plat/serial.h') diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h new file mode 100644 index 00000000..2723f916 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -0,0 +1,117 @@ +/* + * arch/arm/plat-omap/include/mach/serial.h + * + * Copyright (C) 2009 Texas Instruments + * Addded OMAP4 support- Santosh Shilimkar + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_SERIAL_H +#define __ASM_ARCH_SERIAL_H + +#include + +/* + * Memory entry used for the DEBUG_LL UART configuration. See also + * uncompress.h and debug-macro.S. + * + * Note that using a memory location for storing the UART configuration + * has at least two limitations: + * + * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the + * uncompress code could then partially overwrite itself + * 2. We assume printascii is called at least once before paging_init, + * and addruart has a chance to read OMAP_UART_INFO + */ +#define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc) + +/* OMAP1 serial ports */ +#define OMAP1_UART1_BASE 0xfffb0000 +#define OMAP1_UART2_BASE 0xfffb0800 +#define OMAP1_UART3_BASE 0xfffb9800 + +/* OMAP2 serial ports */ +#define OMAP2_UART1_BASE 0x4806a000 +#define OMAP2_UART2_BASE 0x4806c000 +#define OMAP2_UART3_BASE 0x4806e000 + +/* OMAP3 serial ports */ +#define OMAP3_UART1_BASE OMAP2_UART1_BASE +#define OMAP3_UART2_BASE OMAP2_UART2_BASE +#define OMAP3_UART3_BASE 0x49020000 +#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ + +/* OMAP4 serial ports */ +#define OMAP4_UART1_BASE OMAP2_UART1_BASE +#define OMAP4_UART2_BASE OMAP2_UART2_BASE +#define OMAP4_UART3_BASE 0x48020000 +#define OMAP4_UART4_BASE 0x4806e000 + +/* TI816X serial ports */ +#define TI816X_UART1_BASE 0x48020000 +#define TI816X_UART2_BASE 0x48022000 +#define TI816X_UART3_BASE 0x48024000 + +/* External port on Zoom2/3 */ +#define ZOOM_UART_BASE 0x10000000 +#define ZOOM_UART_VIRT 0xfa400000 + +#define OMAP_PORT_SHIFT 2 +#define OMAP7XX_PORT_SHIFT 0 +#define ZOOM_PORT_SHIFT 1 + +#define OMAP1510_BASE_BAUD (12000000/16) +#define OMAP16XX_BASE_BAUD (48000000/16) +#define OMAP24XX_BASE_BAUD (48000000/16) + +/* + * DEBUG_LL port encoding stored into the UART1 scratchpad register by + * decomp_setup in uncompress.h + */ +#define OMAP1UART1 11 +#define OMAP1UART2 12 +#define OMAP1UART3 13 +#define OMAP2UART1 21 +#define OMAP2UART2 22 +#define OMAP2UART3 23 +#define OMAP3UART1 OMAP2UART1 +#define OMAP3UART2 OMAP2UART2 +#define OMAP3UART3 33 +#define OMAP3UART4 34 /* Only on 36xx */ +#define OMAP4UART1 OMAP2UART1 +#define OMAP4UART2 OMAP2UART2 +#define OMAP4UART3 43 +#define OMAP4UART4 44 +#define TI816XUART1 81 +#define TI816XUART2 82 +#define TI816XUART3 83 +#define ZOOM_UART 95 /* Only on zoom2/3 */ + +/* This is only used by 8250.c for omap1510 */ +#define is_omap_port(pt) ({int __ret = 0; \ + if ((pt)->port.mapbase == OMAP1_UART1_BASE || \ + (pt)->port.mapbase == OMAP1_UART2_BASE || \ + (pt)->port.mapbase == OMAP1_UART3_BASE) \ + __ret = 1; \ + __ret; \ + }) + +#ifndef __ASSEMBLER__ + +struct omap_board_data; + +extern void omap_serial_init(void); +extern void omap_serial_init_port(struct omap_board_data *bdata); +extern int omap_uart_can_sleep(void); +extern void omap_uart_check_wakeup(void); +extern void omap_uart_prepare_suspend(void); +extern void omap_uart_prepare_idle(int num); +extern void omap_uart_resume_idle(int num); +extern void omap_uart_enable_irqs(int enable); +#endif + +#endif -- cgit v1.2.3