From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- arch/arm/plat-omap/include/plat/clock.h | 314 ++++++++++++++++++++++++++++++++ 1 file changed, 314 insertions(+) create mode 100644 arch/arm/plat-omap/include/plat/clock.h (limited to 'arch/arm/plat-omap/include/plat/clock.h') diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h new file mode 100644 index 00000000..006e599c --- /dev/null +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -0,0 +1,314 @@ +/* + * OMAP clock: data structure definitions, function prototypes, shared macros + * + * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation + * Written by Tuukka Tikkanen + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_CLOCK_H +#define __ARCH_ARM_OMAP_CLOCK_H + +#include + +struct module; +struct clk; +struct clockdomain; + +/** + * struct clkops - some clock function pointers + * @enable: fn ptr that enables the current clock in hardware + * @disable: fn ptr that enables the current clock in hardware + * @find_idlest: function returning the IDLEST register for the clock's IP blk + * @find_companion: function returning the "companion" clk reg for the clock + * @allow_idle: fn ptr that enables autoidle for the current clock in hardware + * @deny_idle: fn ptr that disables autoidle for the current clock in hardware + * + * A "companion" clk is an accompanying clock to the one being queried + * that must be enabled for the IP module connected to the clock to + * become accessible by the hardware. Neither @find_idlest nor + * @find_companion should be needed; that information is IP + * block-specific; the hwmod code has been created to handle this, but + * until hwmod data is ready and drivers have been converted to use PM + * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and + * @find_companion must, unfortunately, remain. + */ +struct clkops { + int (*enable)(struct clk *); + void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, + u8 *, u8 *); + void (*find_companion)(struct clk *, void __iomem **, + u8 *); + void (*allow_idle)(struct clk *); + void (*deny_idle)(struct clk *); +}; + +#ifdef CONFIG_ARCH_OMAP2PLUS + +/* struct clksel_rate.flags possibilities */ +#define RATE_IN_242X (1 << 0) +#define RATE_IN_243X (1 << 1) +#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */ +#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */ +#define RATE_IN_36XX (1 << 4) +#define RATE_IN_4430 (1 << 5) +#define RATE_IN_TI816X (1 << 6) + +#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) +#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) +#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX) + +/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ +#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) + + +/** + * struct clksel_rate - register bitfield values corresponding to clk divisors + * @val: register bitfield value (shifted to bit 0) + * @div: clock divisor corresponding to @val + * @flags: (see "struct clksel_rate.flags possibilities" above) + * + * @val should match the value of a read from struct clk.clksel_reg + * AND'ed with struct clk.clksel_mask, shifted right to bit 0. + * + * @div is the divisor that should be applied to the parent clock's rate + * to produce the current clock's rate. + * + * XXX @flags probably should be replaced with an struct omap_chip. + */ +struct clksel_rate { + u32 val; + u8 div; + u8 flags; +}; + +/** + * struct clksel - available parent clocks, and a pointer to their divisors + * @parent: struct clk * to a possible parent clock + * @rates: available divisors for this parent clock + * + * A struct clksel is always associated with one or more struct clks + * and one or more struct clksel_rates. + */ +struct clksel { + struct clk *parent; + const struct clksel_rate *rates; +}; + +/** + * struct dpll_data - DPLL registers and integration data + * @mult_div1_reg: register containing the DPLL M and N bitfields + * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg + * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg + * @clk_bypass: struct clk pointer to the clock's bypass clock input + * @clk_ref: struct clk pointer to the clock's reference clock input + * @control_reg: register containing the DPLL mode bitfield + * @enable_mask: mask of the DPLL mode bitfield in @control_reg + * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() + * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() + * @max_multiplier: maximum valid non-bypass multiplier value (actual) + * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() + * @min_divider: minimum valid non-bypass divider value (actual) + * @max_divider: maximum valid non-bypass divider value (actual) + * @modes: possible values of @enable_mask + * @autoidle_reg: register containing the DPLL autoidle mode bitfield + * @idlest_reg: register containing the DPLL idle status bitfield + * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg + * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg + * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg + * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg + * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs + * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs + * @flags: DPLL type/features (see below) + * + * Possible values for @flags: + * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) + * + * @freqsel_mask is only used on the OMAP34xx family and AM35xx. + * + * XXX Some DPLLs have multiple bypass inputs, so it's not technically + * correct to only have one @clk_bypass pointer. + * + * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, + * @last_rounded_n) should be separated from the runtime-fixed fields + * and placed into a different structure, so that the runtime-fixed data + * can be placed into read-only space. + */ +struct dpll_data { + void __iomem *mult_div1_reg; + u32 mult_mask; + u32 div1_mask; + struct clk *clk_bypass; + struct clk *clk_ref; + void __iomem *control_reg; + u32 enable_mask; + unsigned long last_rounded_rate; + u16 last_rounded_m; + u16 max_multiplier; + u8 last_rounded_n; + u8 min_divider; + u8 max_divider; + u8 modes; +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) + void __iomem *autoidle_reg; + void __iomem *idlest_reg; + u32 autoidle_mask; + u32 freqsel_mask; + u32 idlest_mask; + u32 dco_mask; + u32 sddiv_mask; + u8 auto_recal_bit; + u8 recal_en_bit; + u8 recal_st_bit; + u8 flags; +# endif +}; + +#endif + +/* + * struct clk.flags possibilities + * + * XXX document the rest of the clock flags here + * + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) + +/** + * struct clk - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @ops: struct clkops * for this clock + * @name: the name of the clock in the hardware (used in hwmod data and debug) + * @parent: pointer to this clock's parent struct clk + * @children: list_head connecting to the child clks' @sibling list_heads + * @sibling: list_head connecting this clk to its parent clk's @children + * @rate: current clock rate + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @recalc: fn ptr that returns the clock's current rate + * @set_rate: fn ptr that can change the clock's current rate + * @round_rate: fn ptr that can round the clock's current rate + * @init: fn ptr to do clock-specific initialization + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @usecount: number of users that have requested this clock to be enabled + * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div + * @flags: see "struct clk.flags possibilities" above + * @clksel_reg: for clksel clks, register va containing src/divisor select + * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector + * @clksel: for clksel clks, pointer to struct clksel for this clock + * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock + * @clkdm_name: clockdomain name that this clock is contained in + * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime + * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) + * @src_offset: bitshift for source selection bitfield (OMAP1 only) + * + * XXX @rate_offset, @src_offset should probably be removed and OMAP1 + * clock code converted to use clksel. + * + * XXX @usecount is poorly named. It should be "enable_count" or + * something similar. "users" in the description refers to kernel + * code (core code or drivers) that have called clk_enable() and not + * yet called clk_disable(); the usecount of parent clocks is also + * incremented by the clock code when clk_enable() is called on child + * clocks and decremented by the clock code when clk_disable() is + * called on child clocks. + * + * XXX @clkdm, @usecount, @children, @sibling should be marked for + * internal use only. + * + * @children and @sibling are used to optimize parent-to-child clock + * tree traversals. (child-to-parent traversals use @parent.) + * + * XXX The notion of the clock's current rate probably needs to be + * separated from the clock's target rate. + */ +struct clk { + struct list_head node; + const struct clkops *ops; + const char *name; + struct clk *parent; + struct list_head children; + struct list_head sibling; /* node for children */ + unsigned long rate; + void __iomem *enable_reg; + unsigned long (*recalc)(struct clk *); + int (*set_rate)(struct clk *, unsigned long); + long (*round_rate)(struct clk *, unsigned long); + void (*init)(struct clk *); + u8 enable_bit; + s8 usecount; + u8 fixed_div; + u8 flags; +#ifdef CONFIG_ARCH_OMAP2PLUS + void __iomem *clksel_reg; + u32 clksel_mask; + const struct clksel *clksel; + struct dpll_data *dpll_data; + const char *clkdm_name; + struct clockdomain *clkdm; +#else + u8 rate_offset; + u8 src_offset; +#endif +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ +#endif +}; + +struct cpufreq_frequency_table; + +struct clk_functions { + int (*clk_enable)(struct clk *clk); + void (*clk_disable)(struct clk *clk); + long (*clk_round_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_parent)(struct clk *clk, struct clk *parent); + void (*clk_allow_idle)(struct clk *clk); + void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); +#ifdef CONFIG_CPU_FREQ + void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); + void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **); +#endif +}; + +extern int mpurate; + +extern int clk_init(struct clk_functions *custom_clocks); +extern void clk_preinit(struct clk *clk); +extern int clk_register(struct clk *clk); +extern void clk_reparent(struct clk *child, struct clk *parent); +extern void clk_unregister(struct clk *clk); +extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); +extern unsigned long followparent_recalc(struct clk *clk); +extern void clk_enable_init_clocks(void); +unsigned long omap_fixed_divisor_recalc(struct clk *clk); +#ifdef CONFIG_CPU_FREQ +extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); +extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); +#endif +extern struct clk *omap_clk_get_by_name(const char *name); +extern int omap_clk_enable_autoidle_all(void); +extern int omap_clk_disable_autoidle_all(void); + +extern const struct clkops clkops_null; + +extern struct clk dummy_ck; + +#endif -- cgit v1.2.3