From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001
From: root <root@artemis.panaceas.org>
Date: Fri, 25 Dec 2015 04:40:36 +0000
Subject: initial_commit

---
 arch/arm/plat-mxc/include/mach/fsl_usb.h | 107 +++++++++++++++++++++++++++++++
 1 file changed, 107 insertions(+)
 create mode 100755 arch/arm/plat-mxc/include/mach/fsl_usb.h

(limited to 'arch/arm/plat-mxc/include/mach/fsl_usb.h')

diff --git a/arch/arm/plat-mxc/include/mach/fsl_usb.h b/arch/arm/plat-mxc/include/mach/fsl_usb.h
new file mode 100755
index 00000000..0b47a7d5
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/fsl_usb.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2005-2012 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * USB Host side, platform-specific functionality.
+ */
+
+#include <linux/usb/fsl_xcvr.h>
+#include <mach/arc_otg.h>
+
+static void fsl_setup_phy(struct ehci_hcd *ehci,
+			  enum fsl_usb2_phy_modes phy_mode,
+			  int port_offset);
+
+static inline void fsl_platform_usb_setup(struct ehci_hcd *ehci)
+{
+	struct fsl_usb2_platform_data *pdata;
+
+	pdata = ehci_to_hcd(ehci)->self.controller->platform_data;
+	fsl_setup_phy(ehci, pdata->phy_mode, 0);
+}
+
+static inline void fsl_platform_set_host_mode(struct usb_hcd *hcd)
+{
+	unsigned int temp;
+	struct fsl_usb2_platform_data *pdata;
+
+	pdata = hcd->self.controller->platform_data;
+
+	if (pdata->xcvr_ops && pdata->xcvr_ops->set_host)
+		pdata->xcvr_ops->set_host();
+
+	/* set host mode */
+	temp = readl(hcd->regs + 0x1a8);
+	writel(temp | USBMODE_CM_HOST, hcd->regs + 0x1a8);
+}
+
+/* Needed for enable PP and i2c/serial transceivers */
+static inline void
+fsl_platform_set_vbus_power(struct fsl_usb2_platform_data *pdata, int on)
+{
+	u32 temp;
+
+	/* HCSPARAMS */
+	temp = readl(pdata->regs + 0x104);
+	/* Port Power Control */
+	if (temp & HCSPARAMS_PPC) {
+		temp = readl(pdata->regs + FSL_SOC_USB_PORTSC1);
+		if (on)
+			temp |= PORT_POWER;
+		else
+			temp &= ~PORT_POWER;
+
+		writel(temp, pdata->regs + FSL_SOC_USB_PORTSC1);
+	}
+
+	if (pdata->xcvr_ops && pdata->xcvr_ops->set_vbus_power)
+		pdata->xcvr_ops->set_vbus_power(pdata->xcvr_ops, pdata, on);
+}
+
+/* Set USB AHB burst length for host */
+static inline void fsl_platform_set_ahb_burst(struct usb_hcd *hcd)
+{
+	struct fsl_usb2_platform_data *pdata;
+	unsigned int temp;
+
+	pdata = hcd->self.controller->platform_data;
+	if (pdata->change_ahb_burst) {
+		temp = readl(hcd->regs + FSL_SOC_USB_SBUSCFG);
+		writel((temp & (~(0x7))) | pdata->ahb_burst_mode,
+			hcd->regs + FSL_SOC_USB_SBUSCFG);
+	}
+
+	/* Increase TX fifo threshold for USB+ATA for i.mx35 2.0 */
+	if (cpu_is_mx35() && (imx_cpu_ver() >= IMX_CHIP_REVISION_2_0)) {
+		temp = readl(hcd->regs + FSL_SOC_USB_TXFILLTUNING);
+		/* Change TX FIFO threshold to be 0x20 */
+		writel((temp & (~(0x3f << 16))) | (0x20 << 16),
+			hcd->regs + FSL_SOC_USB_TXFILLTUNING);
+	}
+
+	/* Increase TX fifo threshold for USB+SD in Hostx */
+	if (cpu_is_mx53() && (strcmp("DR", pdata->name))) {
+		temp = readl(hcd->regs + FSL_SOC_USB_TXFILLTUNING);
+		/* Change TX FIFO threshold to be 0x08 */
+		writel((temp & (~(0x3f << 16))) | (0x08 << 16),
+				hcd->regs + FSL_SOC_USB_TXFILLTUNING);
+	}
+
+	/* Increase TX fifo threshold for in Hostx */
+	if (cpu_is_mx6()) {
+		temp = readl(hcd->regs + FSL_SOC_USB_TXFILLTUNING);
+		/* Change TX FIFO threshold to be 0x08 */
+		writel((temp & (~(0x3f << 16))) | (0x08 << 16),
+				hcd->regs + FSL_SOC_USB_TXFILLTUNING);
+	}
+}
-- 
cgit v1.2.3