From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- arch/arm/mach-omap1/board-fsample.c | 398 ++++++++++++++++++++++++++++++++++++ 1 file changed, 398 insertions(+) create mode 100644 arch/arm/mach-omap1/board-fsample.c (limited to 'arch/arm/mach-omap1/board-fsample.c') diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c new file mode 100644 index 00000000..87f173d9 --- /dev/null +++ b/arch/arm/mach-omap1/board-fsample.c @@ -0,0 +1,398 @@ +/* + * linux/arch/arm/mach-omap1/board-fsample.c + * + * Modified from board-perseus2.c + * + * Original OMAP730 support by Jean Pihet + * Updated for 2.6 by Kevin Hilman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +/* fsample is pretty close to p2-sample */ + +#define fsample_cpld_read(reg) __raw_readb(reg) +#define fsample_cpld_write(val, reg) __raw_writeb(val, reg) + +#define FSAMPLE_CPLD_BASE 0xE8100000 +#define FSAMPLE_CPLD_SIZE SZ_4K +#define FSAMPLE_CPLD_START 0x05080000 + +#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00) +#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02) +#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02) +#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04) +#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06) +#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06) + +#define FSAMPLE_CPLD_BIT_BT_RESET 0 +#define FSAMPLE_CPLD_BIT_LCD_RESET 1 +#define FSAMPLE_CPLD_BIT_CAM_PWDN 2 +#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3 +#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4 +#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5 +#define FSAMPLE_CPLD_BIT_BACKLIGHT 6 +#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7 +#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8 +#define FSAMPLE_CPLD_BIT_OTG_RESET 9 + +#define fsample_cpld_set(bit) \ + fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR) + +#define fsample_cpld_clear(bit) \ + fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR) + +static const unsigned int fsample_keymap[] = { + KEY(0, 0, KEY_UP), + KEY(1, 0, KEY_RIGHT), + KEY(2, 0, KEY_LEFT), + KEY(3, 0, KEY_DOWN), + KEY(4, 0, KEY_ENTER), + KEY(0, 1, KEY_F10), + KEY(1, 1, KEY_SEND), + KEY(2, 1, KEY_END), + KEY(3, 1, KEY_VOLUMEDOWN), + KEY(4, 1, KEY_VOLUMEUP), + KEY(5, 1, KEY_RECORD), + KEY(0, 2, KEY_F9), + KEY(1, 2, KEY_3), + KEY(2, 2, KEY_6), + KEY(3, 2, KEY_9), + KEY(4, 2, KEY_KPDOT), + KEY(0, 3, KEY_BACK), + KEY(1, 3, KEY_2), + KEY(2, 3, KEY_5), + KEY(3, 3, KEY_8), + KEY(4, 3, KEY_0), + KEY(5, 3, KEY_KPSLASH), + KEY(0, 4, KEY_HOME), + KEY(1, 4, KEY_1), + KEY(2, 4, KEY_4), + KEY(3, 4, KEY_7), + KEY(4, 4, KEY_KPASTERISK), + KEY(5, 4, KEY_POWER), +}; + +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + +static struct resource smc91x_resources[] = { + [0] = { + .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ + .end = H2P2_DBG_FPGA_ETHR_START + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_7XX_MPU_EXT_NIRQ, + .end = 0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static void __init fsample_init_smc91x(void) +{ + fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); + fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); +} + +static struct mtd_partition nor_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* rest of flash is a file system */ + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + }, +}; + +static struct physmap_flash_data nor_data = { + .width = 2, + .set_vpp = omap1_set_vpp, + .parts = nor_partitions, + .nr_parts = ARRAY_SIZE(nor_partitions), +}; + +static struct resource nor_resource = { + .start = OMAP_CS0_PHYS, + .end = OMAP_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nor_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &nor_data, + }, + .num_resources = 1, + .resource = &nor_resource, +}; + +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define FSAMPLE_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + }, +}; + +static struct resource nand_resource = { + .start = OMAP_CS3_PHYS, + .end = OMAP_CS3_PHYS + SZ_4K - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nand_device = { + .name = "gen_nand", + .id = 0, + .dev = { + .platform_data = &nand_data, + }, + .num_resources = 1, + .resource = &nand_resource, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct resource kp_resources[] = { + [0] = { + .start = INT_7XX_MPUIO_KEYPAD, + .end = INT_7XX_MPUIO_KEYPAD, + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct matrix_keymap_data fsample_keymap_data = { + .keymap = fsample_keymap, + .keymap_size = ARRAY_SIZE(fsample_keymap), +}; + +static struct omap_kp_platform_data kp_data = { + .rows = 8, + .cols = 8, + .keymap_data = &fsample_keymap_data, + .delay = 4, +}; + +static struct platform_device kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &kp_data, + }, + .num_resources = ARRAY_SIZE(kp_resources), + .resource = kp_resources, +}; + +static struct platform_device lcd_device = { + .name = "lcd_p2", + .id = -1, +}; + +static struct platform_device *devices[] __initdata = { + &nor_device, + &nand_device, + &smc91x_device, + &kp_device, + &lcd_device, +}; + +static struct omap_lcd_config fsample_lcd_config = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel fsample_config[] __initdata = { + { OMAP_TAG_LCD, &fsample_lcd_config }, +}; + +static void __init omap_fsample_init(void) +{ + fsample_init_smc91x(); + + if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) + BUG(); + gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); + + omap_cfg_reg(L3_1610_FLASH_CS2B_OE); + omap_cfg_reg(M8_1610_FLASH_CS2B_WE); + + /* Mux pins for keypad */ + omap_cfg_reg(E2_7XX_KBR0); + omap_cfg_reg(J7_7XX_KBR1); + omap_cfg_reg(E1_7XX_KBR2); + omap_cfg_reg(F3_7XX_KBR3); + omap_cfg_reg(D2_7XX_KBR4); + omap_cfg_reg(C2_7XX_KBC0); + omap_cfg_reg(D3_7XX_KBC1); + omap_cfg_reg(E4_7XX_KBC2); + omap_cfg_reg(F4_7XX_KBC3); + omap_cfg_reg(E3_7XX_KBC4); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + omap_board_config = fsample_config; + omap_board_config_size = ARRAY_SIZE(fsample_config); + omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); +} + +static void __init omap_fsample_init_irq(void) +{ + omap1_init_common_hw(); + omap_init_irq(); +} + +/* Only FPGA needs to be mapped here. All others are done with ioremap */ +static struct map_desc omap_fsample_io_desc[] __initdata = { + { + .virtual = H2P2_DBG_FPGA_BASE, + .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START), + .length = H2P2_DBG_FPGA_SIZE, + .type = MT_DEVICE + }, + { + .virtual = FSAMPLE_CPLD_BASE, + .pfn = __phys_to_pfn(FSAMPLE_CPLD_START), + .length = FSAMPLE_CPLD_SIZE, + .type = MT_DEVICE + } +}; + +static void __init omap_fsample_map_io(void) +{ + omap1_map_common_io(); + iotable_init(omap_fsample_io_desc, + ARRAY_SIZE(omap_fsample_io_desc)); + + /* Early, board-dependent init */ + + /* + * Hold GSM Reset until needed + */ + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); + + /* + * UARTs -> done automagically by 8250 driver + */ + + /* + * CSx timings, GPIO Mux ... setup + */ + + /* Flash: CS0 timings setup */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); + + /* + * Ethernet support through the debug board + * CS1 timings setup + */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); + + /* + * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, + * It is used as the Ethernet controller interrupt + */ + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); +} + +MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") +/* Maintainer: Brian Swetland */ + .boot_params = 0x10000100, + .map_io = omap_fsample_map_io, + .reserve = omap_reserve, + .init_irq = omap_fsample_init_irq, + .init_machine = omap_fsample_init, + .timer = &omap_timer, +MACHINE_END -- cgit v1.2.3