From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- arch/arm/mach-mx6/usb_h3.c | 240 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 240 insertions(+) create mode 100644 arch/arm/mach-mx6/usb_h3.c (limited to 'arch/arm/mach-mx6/usb_h3.c') diff --git a/arch/arm/mach-mx6/usb_h3.c b/arch/arm/mach-mx6/usb_h3.c new file mode 100644 index 00000000..a057269c --- /dev/null +++ b/arch/arm/mach-mx6/usb_h3.c @@ -0,0 +1,240 @@ +/* + * Copyright (C) 2011-2012 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * High Speed Inter Chip code for i.MX6, this file is for HSIC port 2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "devices-imx6q.h" +#include "regs-anadig.h" +#include "usb.h" + +static struct clk *usb_oh3_clk; +static struct clk *usb_phy4_clk; + +extern int clk_get_usecount(struct clk *clk); +static struct fsl_usb2_platform_data usbh3_config; + +static void usbh3_internal_phy_clock_gate(bool on) +{ + if (on) { + /* must turn on the 480M clock, otherwise + * there will be a 10ms delay before host + * controller send out resume signal*/ + USB_H3_CTRL |= UCTRL_UTMI_ON_CLOCK; + USB_UH3_HSIC_CTRL |= HSIC_CLK_ON; + } else { + USB_UH3_HSIC_CTRL &= ~HSIC_CLK_ON; + /* can't turn off this clock, otherwise + * there will be a 10ms delay before host + * controller send out resume signal*/ + /*USB_H3_CTRL &= ~UCTRL_UTMI_ON_CLOCK;*/ + } +} + +static int fsl_usb_host_init_ext(struct platform_device *pdev) +{ + int ret; + struct clk *usb_clk; + usb_clk = clk_get(NULL, "usboh3_clk"); + clk_enable(usb_clk); + usb_oh3_clk = usb_clk; + + usb_clk = clk_get(NULL, "usb_phy4_clk"); + clk_enable(usb_clk); + usb_phy4_clk = usb_clk; + + ret = fsl_usb_host_init(pdev); + if (ret) { + printk(KERN_ERR "host1 init fails......\n"); + return ret; + } + usbh3_internal_phy_clock_gate(true); + + /* Host3 HSIC enable */ + USB_UH3_HSIC_CTRL |= HSIC_EN; + + return 0; +} + +static void fsl_usb_host_uninit_ext(struct platform_device *pdev) +{ + struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; + + fsl_usb_host_uninit(pdata); + + clk_put(usb_phy4_clk); + + clk_put(usb_oh3_clk); + +} + +static void usbh3_clock_gate(bool on) +{ + pr_debug("%s: on is %d\n", __func__, on); + if (on) { + clk_enable(usb_oh3_clk); + clk_enable(usb_phy4_clk); + usbh3_internal_phy_clock_gate(true); + } else { + usbh3_internal_phy_clock_gate(false); + clk_disable(usb_phy4_clk); + clk_disable(usb_oh3_clk); + } +} + +void mx6_set_host3_vbus_func(driver_vbus_func driver_vbus) +{ + usbh3_config.platform_driver_vbus = driver_vbus; +} + +static void _wake_up_enable(struct fsl_usb2_platform_data *pdata, bool enable) +{ + pr_debug("host3, %s, enable is %d\n", __func__, enable); + /* for HSIC, no disconnect nor connect + * we need to disable the WKDS, WKCN */ + UH3_PORTSC1 &= ~(PORTSC_WKDC | PORTSC_WKCN); + + if (enable) { + USB_H3_CTRL |= (UCTRL_OWIE); + } else { + USB_H3_CTRL &= ~(UCTRL_OWIE); + /* The interrupt must be disabled for at least 3 + * cycles of the standby clock(32k Hz) , that is 0.094 ms*/ + udelay(100); + } +} + +static void _phy_lowpower_suspend(struct fsl_usb2_platform_data *pdata, bool enable) +{ + pr_debug("host3, %s, enable is %d\n", __func__, enable); + if (enable) + UH3_PORTSC1 |= PORTSC_PHCD; + else + UH3_PORTSC1 &= ~PORTSC_PHCD; + +} + +static enum usb_wakeup_event _is_usbh3_wakeup(struct fsl_usb2_platform_data *pdata) +{ + u32 wakeup_req = USB_H3_CTRL & UCTRL_OWIR; + + if (wakeup_req) + return WAKEUP_EVENT_DPDM; + pr_err("host3, %s, invalid wake up\n", __func__); + return WAKEUP_EVENT_INVALID; +} + +static void usbh3_wakeup_handler(struct fsl_usb2_platform_data *pdata) +{ + _wake_up_enable(pdata, false); + _phy_lowpower_suspend(pdata, false); +} + +static void usbh3_wakeup_event_clear(void) +{ + u32 wakeup_req = USB_H3_CTRL & UCTRL_OWIR; + pr_debug("%s\n", __func__); + + if (wakeup_req != 0) { + /* Disable H3 wakeup enable to clear H3 wakeup request, wait 3 clock + * cycles of standly clock(32KHz) + */ + USB_H3_CTRL &= ~UCTRL_OWIE; + udelay(100); + USB_H3_CTRL |= UCTRL_OWIE; + } +} + +static void hsic_start(void) +{ + pr_debug("%s", __func__); + /* strobe 47K pull up */ + if (cpu_is_mx6q()) + mxc_iomux_v3_setup_pad( + MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE_START); + else if (cpu_is_mx6dl()) + mxc_iomux_v3_setup_pad( + MX6DL_PAD_RGMII_RXC__USBOH3_H3_STROBE_START); +} + +static void hsic_device_connected(void) +{ + pr_debug("%s\n", __func__); + if (!(USB_UH3_HSIC_CTRL & HSIC_DEV_CONN)) + USB_UH3_HSIC_CTRL |= HSIC_DEV_CONN; +} + +static struct fsl_usb2_platform_data usbh3_config = { + .name = "Host 3", + .init = fsl_usb_host_init_ext, + .exit = fsl_usb_host_uninit_ext, + .operating_mode = FSL_USB2_MPH_HOST, + .phy_mode = FSL_USB2_PHY_HSIC, + .power_budget = 500, /* 500 mA max power */ + .wake_up_enable = _wake_up_enable, + .usb_clock_for_pm = usbh3_clock_gate, + .phy_lowpower_suspend = _phy_lowpower_suspend, + .is_wakeup_event = _is_usbh3_wakeup, + .wakeup_handler = usbh3_wakeup_handler, + .transceiver = "hsic_xcvr", + .hsic_post_ops = hsic_start, + .hsic_device_connected = hsic_device_connected, +}; + +static struct fsl_usb2_wakeup_platform_data usbh3_wakeup_config = { + .name = "usbh3 wakeup", + .usb_clock_for_pm = usbh3_clock_gate, + .usb_pdata = {&usbh3_config, NULL, NULL}, + .usb_wakeup_exhandle = usbh3_wakeup_event_clear, +}; + +void __init mx6_usb_h3_init(void) +{ + struct platform_device *pdev, *pdev_wakeup; + static void __iomem *anatop_base_addr = MX6_IO_ADDRESS(ANATOP_BASE_ADDR); + usbh3_config.wakeup_pdata = &usbh3_wakeup_config; + pdev = imx6q_add_fsl_ehci_hs(3, &usbh3_config); + usbh3_wakeup_config.usb_pdata[0] = pdev->dev.platform_data; + pdev_wakeup = imx6q_add_fsl_usb2_hs_wakeup(3, &usbh3_wakeup_config); + platform_device_add(pdev); + ((struct fsl_usb2_platform_data *)(pdev->dev.platform_data))->wakeup_pdata = + pdev_wakeup->dev.platform_data; + + /* Some phy and power's special controls for host3 + * 1. Its 480M is from OTG's 480M + * 2. EN_USB_CLKS should always be opened + */ + __raw_writel(BM_ANADIG_USB1_PLL_480_CTRL_EN_USB_CLKS, + anatop_base_addr + HW_ANADIG_USB1_PLL_480_CTRL_SET); + /* must change the clkgate delay to 2 or 3 to avoid + * 24M OSCI clock not stable issue */ + __raw_writel(BF_ANADIG_ANA_MISC0_CLKGATE_DELAY(3), + anatop_base_addr + HW_ANADIG_ANA_MISC0); +} -- cgit v1.2.3