From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- arch/arm/mach-ep93xx/core.c | 889 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 889 insertions(+) create mode 100644 arch/arm/mach-ep93xx/core.c (limited to 'arch/arm/mach-ep93xx/core.c') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c new file mode 100644 index 00000000..6659a0d1 --- /dev/null +++ b/arch/arm/mach-ep93xx/core.c @@ -0,0 +1,889 @@ +/* + * arch/arm/mach-ep93xx/core.c + * Core routines for Cirrus EP93xx chips. + * + * Copyright (C) 2006 Lennert Buytenhek + * Copyright (C) 2007 Herbert Valerio Riedel + * + * Thanks go to Michael Burian and Ray Lehtiniemi for their key + * role in the ep93xx linux community. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include + + +/************************************************************************* + * Static I/O mappings that are needed for all EP93xx platforms + *************************************************************************/ +static struct map_desc ep93xx_io_desc[] __initdata = { + { + .virtual = EP93XX_AHB_VIRT_BASE, + .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE), + .length = EP93XX_AHB_SIZE, + .type = MT_DEVICE, + }, { + .virtual = EP93XX_APB_VIRT_BASE, + .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE), + .length = EP93XX_APB_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init ep93xx_map_io(void) +{ + iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc)); +} + + +/************************************************************************* + * Timer handling for EP93xx + ************************************************************************* + * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and + * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate + * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz, + * is free-running, and can't generate interrupts. + * + * The 508 kHz timers are ideal for use for the timer interrupt, as the + * most common values of HZ divide 508 kHz nicely. We pick one of the 16 + * bit timers (timer 1) since we don't need more than 16 bits of reload + * value as long as HZ >= 8. + * + * The higher clock rate of timer 4 makes it a better choice than the + * other timers for use in gettimeoffset(), while the fact that it can't + * generate interrupts means we don't have to worry about not being able + * to use this timer for something else. We also use timer 4 for keeping + * track of lost jiffies. + */ +#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x)) +#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00) +#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04) +#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08) +#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7) +#define EP93XX_TIMER123_CONTROL_MODE (1 << 6) +#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3) +#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c) +#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20) +#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24) +#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28) +#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c) +#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60) +#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64) +#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8) +#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80) +#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84) +#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88) +#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c) + +#define EP93XX_TIMER123_CLOCK 508469 +#define EP93XX_TIMER4_CLOCK 983040 + +#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1) +#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ) + +static unsigned int last_jiffy_time; + +static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) +{ + /* Writing any value clears the timer interrupt */ + __raw_writel(1, EP93XX_TIMER1_CLEAR); + + /* Recover lost jiffies */ + while ((signed long) + (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time) + >= TIMER4_TICKS_PER_JIFFY) { + last_jiffy_time += TIMER4_TICKS_PER_JIFFY; + timer_tick(); + } + + return IRQ_HANDLED; +} + +static struct irqaction ep93xx_timer_irq = { + .name = "ep93xx timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = ep93xx_timer_interrupt, +}; + +static void __init ep93xx_timer_init(void) +{ + u32 tmode = EP93XX_TIMER123_CONTROL_MODE | + EP93XX_TIMER123_CONTROL_CLKSEL; + + /* Enable periodic HZ timer. */ + __raw_writel(tmode, EP93XX_TIMER1_CONTROL); + __raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD); + __raw_writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE, + EP93XX_TIMER1_CONTROL); + + /* Enable lost jiffy timer. */ + __raw_writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE, + EP93XX_TIMER4_VALUE_HIGH); + + setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq); +} + +static unsigned long ep93xx_gettimeoffset(void) +{ + int offset; + + offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time; + + /* Calculate (1000000 / 983040) * offset. */ + return offset + (53 * offset / 3072); +} + +struct sys_timer ep93xx_timer = { + .init = ep93xx_timer_init, + .offset = ep93xx_gettimeoffset, +}; + + +/************************************************************************* + * EP93xx IRQ handling + *************************************************************************/ +extern void ep93xx_gpio_init_irq(void); + +void __init ep93xx_init_irq(void) +{ + vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0); + vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0); + + ep93xx_gpio_init_irq(); +} + + +/************************************************************************* + * EP93xx System Controller Software Locked register handling + *************************************************************************/ + +/* + * syscon_swlock prevents anything else from writing to the syscon + * block while a software locked register is being written. + */ +static DEFINE_SPINLOCK(syscon_swlock); + +void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg) +{ + unsigned long flags; + + spin_lock_irqsave(&syscon_swlock, flags); + + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); + __raw_writel(val, reg); + + spin_unlock_irqrestore(&syscon_swlock, flags); +} +EXPORT_SYMBOL(ep93xx_syscon_swlocked_write); + +void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&syscon_swlock, flags); + + val = __raw_readl(EP93XX_SYSCON_DEVCFG); + val &= ~clear_bits; + val |= set_bits; + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); + __raw_writel(val, EP93XX_SYSCON_DEVCFG); + + spin_unlock_irqrestore(&syscon_swlock, flags); +} +EXPORT_SYMBOL(ep93xx_devcfg_set_clear); + +/** + * ep93xx_chip_revision() - returns the EP93xx chip revision + * + * See for more information. + */ +unsigned int ep93xx_chip_revision(void) +{ + unsigned int v; + + v = __raw_readl(EP93XX_SYSCON_SYSCFG); + v &= EP93XX_SYSCON_SYSCFG_REV_MASK; + v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT; + return v; +} + +/************************************************************************* + * EP93xx peripheral handling + *************************************************************************/ +#define EP93XX_UART_MCR_OFFSET (0x0100) + +static void ep93xx_uart_set_mctrl(struct amba_device *dev, + void __iomem *base, unsigned int mctrl) +{ + unsigned int mcr; + + mcr = 0; + if (mctrl & TIOCM_RTS) + mcr |= 2; + if (mctrl & TIOCM_DTR) + mcr |= 1; + + __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET); +} + +static struct amba_pl010_data ep93xx_uart_data = { + .set_mctrl = ep93xx_uart_set_mctrl, +}; + +static struct amba_device uart1_device = { + .dev = { + .init_name = "apb:uart1", + .platform_data = &ep93xx_uart_data, + }, + .res = { + .start = EP93XX_UART1_PHYS_BASE, + .end = EP93XX_UART1_PHYS_BASE + 0x0fff, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_EP93XX_UART1, NO_IRQ }, + .periphid = 0x00041010, +}; + +static struct amba_device uart2_device = { + .dev = { + .init_name = "apb:uart2", + .platform_data = &ep93xx_uart_data, + }, + .res = { + .start = EP93XX_UART2_PHYS_BASE, + .end = EP93XX_UART2_PHYS_BASE + 0x0fff, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_EP93XX_UART2, NO_IRQ }, + .periphid = 0x00041010, +}; + +static struct amba_device uart3_device = { + .dev = { + .init_name = "apb:uart3", + .platform_data = &ep93xx_uart_data, + }, + .res = { + .start = EP93XX_UART3_PHYS_BASE, + .end = EP93XX_UART3_PHYS_BASE + 0x0fff, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_EP93XX_UART3, NO_IRQ }, + .periphid = 0x00041010, +}; + + +static struct resource ep93xx_rtc_resource[] = { + { + .start = EP93XX_RTC_PHYS_BASE, + .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ep93xx_rtc_device = { + .name = "ep93xx-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_rtc_resource), + .resource = ep93xx_rtc_resource, +}; + + +static struct resource ep93xx_ohci_resources[] = { + [0] = { + .start = EP93XX_USB_PHYS_BASE, + .end = EP93XX_USB_PHYS_BASE + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EP93XX_USB, + .end = IRQ_EP93XX_USB, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct platform_device ep93xx_ohci_device = { + .name = "ep93xx-ohci", + .id = -1, + .dev = { + .dma_mask = &ep93xx_ohci_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(ep93xx_ohci_resources), + .resource = ep93xx_ohci_resources, +}; + + +/************************************************************************* + * EP93xx physmap'ed flash + *************************************************************************/ +static struct physmap_flash_data ep93xx_flash_data; + +static struct resource ep93xx_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ep93xx_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ep93xx_flash_data, + }, + .num_resources = 1, + .resource = &ep93xx_flash_resource, +}; + +/** + * ep93xx_register_flash() - Register the external flash device. + * @width: bank width in octets + * @start: resource start address + * @size: resource size + */ +void __init ep93xx_register_flash(unsigned int width, + resource_size_t start, resource_size_t size) +{ + ep93xx_flash_data.width = width; + + ep93xx_flash_resource.start = start; + ep93xx_flash_resource.end = start + size - 1; + + platform_device_register(&ep93xx_flash); +} + + +/************************************************************************* + * EP93xx ethernet peripheral handling + *************************************************************************/ +static struct ep93xx_eth_data ep93xx_eth_data; + +static struct resource ep93xx_eth_resource[] = { + { + .start = EP93XX_ETHERNET_PHYS_BASE, + .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_EP93XX_ETHERNET, + .end = IRQ_EP93XX_ETHERNET, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device ep93xx_eth_device = { + .name = "ep93xx-eth", + .id = -1, + .dev = { + .platform_data = &ep93xx_eth_data, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &ep93xx_eth_dma_mask, + }, + .num_resources = ARRAY_SIZE(ep93xx_eth_resource), + .resource = ep93xx_eth_resource, +}; + +/** + * ep93xx_register_eth - Register the built-in ethernet platform device. + * @data: platform specific ethernet configuration (__initdata) + * @copy_addr: flag indicating that the MAC address should be copied + * from the IndAd registers (as programmed by the bootloader) + */ +void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) +{ + if (copy_addr) + memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6); + + ep93xx_eth_data = *data; + platform_device_register(&ep93xx_eth_device); +} + + +/************************************************************************* + * EP93xx i2c peripheral handling + *************************************************************************/ +static struct i2c_gpio_platform_data ep93xx_i2c_data; + +static struct platform_device ep93xx_i2c_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ep93xx_i2c_data, + }, +}; + +/** + * ep93xx_register_i2c - Register the i2c platform device. + * @data: platform specific i2c-gpio configuration (__initdata) + * @devices: platform specific i2c bus device information (__initdata) + * @num: the number of devices on the i2c bus + */ +void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, + struct i2c_board_info *devices, int num) +{ + /* + * Set the EEPROM interface pin drive type control. + * Defines the driver type for the EECLK and EEDAT pins as either + * open drain, which will require an external pull-up, or a normal + * CMOS driver. + */ + if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT) + pr_warning("sda != EEDAT, open drain has no effect\n"); + if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK) + pr_warning("scl != EECLK, open drain has no effect\n"); + + __raw_writel((data->sda_is_open_drain << 1) | + (data->scl_is_open_drain << 0), + EP93XX_GPIO_EEDRIVE); + + ep93xx_i2c_data = *data; + i2c_register_board_info(0, devices, num); + platform_device_register(&ep93xx_i2c_device); +} + +/************************************************************************* + * EP93xx SPI peripheral handling + *************************************************************************/ +static struct ep93xx_spi_info ep93xx_spi_master_data; + +static struct resource ep93xx_spi_resources[] = { + { + .start = EP93XX_SPI_PHYS_BASE, + .end = EP93XX_SPI_PHYS_BASE + 0x18 - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EP93XX_SSP, + .end = IRQ_EP93XX_SSP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ep93xx_spi_device = { + .name = "ep93xx-spi", + .id = 0, + .dev = { + .platform_data = &ep93xx_spi_master_data, + }, + .num_resources = ARRAY_SIZE(ep93xx_spi_resources), + .resource = ep93xx_spi_resources, +}; + +/** + * ep93xx_register_spi() - registers spi platform device + * @info: ep93xx board specific spi master info (__initdata) + * @devices: SPI devices to register (__initdata) + * @num: number of SPI devices to register + * + * This function registers platform device for the EP93xx SPI controller and + * also makes sure that SPI pins are muxed so that I2S is not using those pins. + */ +void __init ep93xx_register_spi(struct ep93xx_spi_info *info, + struct spi_board_info *devices, int num) +{ + /* + * When SPI is used, we need to make sure that I2S is muxed off from + * SPI pins. + */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP); + + ep93xx_spi_master_data = *info; + spi_register_board_info(devices, num); + platform_device_register(&ep93xx_spi_device); +} + +/************************************************************************* + * EP93xx LEDs + *************************************************************************/ +static struct gpio_led ep93xx_led_pins[] = { + { + .name = "platform:grled", + .gpio = EP93XX_GPIO_LINE_GRLED, + }, { + .name = "platform:rdled", + .gpio = EP93XX_GPIO_LINE_RDLED, + }, +}; + +static struct gpio_led_platform_data ep93xx_led_data = { + .num_leds = ARRAY_SIZE(ep93xx_led_pins), + .leds = ep93xx_led_pins, +}; + +static struct platform_device ep93xx_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ep93xx_led_data, + }, +}; + + +/************************************************************************* + * EP93xx pwm peripheral handling + *************************************************************************/ +static struct resource ep93xx_pwm0_resource[] = { + { + .start = EP93XX_PWM_PHYS_BASE, + .end = EP93XX_PWM_PHYS_BASE + 0x10 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ep93xx_pwm0_device = { + .name = "ep93xx-pwm", + .id = 0, + .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource), + .resource = ep93xx_pwm0_resource, +}; + +static struct resource ep93xx_pwm1_resource[] = { + { + .start = EP93XX_PWM_PHYS_BASE + 0x20, + .end = EP93XX_PWM_PHYS_BASE + 0x30 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ep93xx_pwm1_device = { + .name = "ep93xx-pwm", + .id = 1, + .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource), + .resource = ep93xx_pwm1_resource, +}; + +void __init ep93xx_register_pwm(int pwm0, int pwm1) +{ + if (pwm0) + platform_device_register(&ep93xx_pwm0_device); + + /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */ + if (pwm1) + platform_device_register(&ep93xx_pwm1_device); +} + +int ep93xx_pwm_acquire_gpio(struct platform_device *pdev) +{ + int err; + + if (pdev->id == 0) { + err = 0; + } else if (pdev->id == 1) { + err = gpio_request(EP93XX_GPIO_LINE_EGPIO14, + dev_name(&pdev->dev)); + if (err) + return err; + err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0); + if (err) + goto fail; + + /* PWM 1 output on EGPIO[14] */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG); + } else { + err = -ENODEV; + } + + return err; + +fail: + gpio_free(EP93XX_GPIO_LINE_EGPIO14); + return err; +} +EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio); + +void ep93xx_pwm_release_gpio(struct platform_device *pdev) +{ + if (pdev->id == 1) { + gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14); + gpio_free(EP93XX_GPIO_LINE_EGPIO14); + + /* EGPIO[14] used for GPIO */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG); + } +} +EXPORT_SYMBOL(ep93xx_pwm_release_gpio); + + +/************************************************************************* + * EP93xx video peripheral handling + *************************************************************************/ +static struct ep93xxfb_mach_info ep93xxfb_data; + +static struct resource ep93xx_fb_resource[] = { + { + .start = EP93XX_RASTER_PHYS_BASE, + .end = EP93XX_RASTER_PHYS_BASE + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ep93xx_fb_device = { + .name = "ep93xx-fb", + .id = -1, + .dev = { + .platform_data = &ep93xxfb_data, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask, + }, + .num_resources = ARRAY_SIZE(ep93xx_fb_resource), + .resource = ep93xx_fb_resource, +}; + +static struct platform_device ep93xx_bl_device = { + .name = "ep93xx-bl", + .id = -1, +}; + +/** + * ep93xx_register_fb - Register the framebuffer platform device. + * @data: platform specific framebuffer configuration (__initdata) + */ +void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) +{ + ep93xxfb_data = *data; + platform_device_register(&ep93xx_fb_device); + platform_device_register(&ep93xx_bl_device); +} + + +/************************************************************************* + * EP93xx matrix keypad peripheral handling + *************************************************************************/ +static struct ep93xx_keypad_platform_data ep93xx_keypad_data; + +static struct resource ep93xx_keypad_resource[] = { + { + .start = EP93XX_KEY_MATRIX_PHYS_BASE, + .end = EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_EP93XX_KEY, + .end = IRQ_EP93XX_KEY, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ep93xx_keypad_device = { + .name = "ep93xx-keypad", + .id = -1, + .dev = { + .platform_data = &ep93xx_keypad_data, + }, + .num_resources = ARRAY_SIZE(ep93xx_keypad_resource), + .resource = ep93xx_keypad_resource, +}; + +/** + * ep93xx_register_keypad - Register the keypad platform device. + * @data: platform specific keypad configuration (__initdata) + */ +void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data) +{ + ep93xx_keypad_data = *data; + platform_device_register(&ep93xx_keypad_device); +} + +int ep93xx_keypad_acquire_gpio(struct platform_device *pdev) +{ + int err; + int i; + + for (i = 0; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_c; + err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_d; + } + + /* Enable the keypad controller; GPIO ports C and D used for keypad */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS | + EP93XX_SYSCON_DEVCFG_GONK); + + return 0; + +fail_gpio_d: + gpio_free(EP93XX_GPIO_LINE_C(i)); +fail_gpio_c: + for ( ; i >= 0; --i) { + gpio_free(EP93XX_GPIO_LINE_C(i)); + gpio_free(EP93XX_GPIO_LINE_D(i)); + } + return err; +} +EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio); + +void ep93xx_keypad_release_gpio(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < 8; i++) { + gpio_free(EP93XX_GPIO_LINE_C(i)); + gpio_free(EP93XX_GPIO_LINE_D(i)); + } + + /* Disable the keypad controller; GPIO ports C and D used for GPIO */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | + EP93XX_SYSCON_DEVCFG_GONK); +} +EXPORT_SYMBOL(ep93xx_keypad_release_gpio); + +/************************************************************************* + * EP93xx I2S audio peripheral handling + *************************************************************************/ +static struct resource ep93xx_i2s_resource[] = { + { + .start = EP93XX_I2S_PHYS_BASE, + .end = EP93XX_I2S_PHYS_BASE + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ep93xx_i2s_device = { + .name = "ep93xx-i2s", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_i2s_resource), + .resource = ep93xx_i2s_resource, +}; + +static struct platform_device ep93xx_pcm_device = { + .name = "ep93xx-pcm-audio", + .id = -1, +}; + +void __init ep93xx_register_i2s(void) +{ + platform_device_register(&ep93xx_i2s_device); + platform_device_register(&ep93xx_pcm_device); +} + +#define EP93XX_SYSCON_DEVCFG_I2S_MASK (EP93XX_SYSCON_DEVCFG_I2SONSSP | \ + EP93XX_SYSCON_DEVCFG_I2SONAC97) + +#define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \ + EP93XX_SYSCON_I2SCLKDIV_SPOL) + +int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config) +{ + unsigned val; + + /* Sanity check */ + if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK) + return -EINVAL; + if (i2s_config & ~EP93XX_I2SCLKDIV_MASK) + return -EINVAL; + + /* Must have only one of I2SONSSP/I2SONAC97 set */ + if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) == + (i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97)) + return -EINVAL; + + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK); + ep93xx_devcfg_set_bits(i2s_pins); + + /* + * This is potentially racy with the clock api for i2s_mclk, sclk and + * lrclk. Since the i2s driver is the only user of those clocks we + * rely on it to prevent parallel use of this function and the + * clock api for the i2s clocks. + */ + val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); + val &= ~EP93XX_I2SCLKDIV_MASK; + val |= i2s_config; + ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV); + + return 0; +} +EXPORT_SYMBOL(ep93xx_i2s_acquire); + +void ep93xx_i2s_release(void) +{ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK); +} +EXPORT_SYMBOL(ep93xx_i2s_release); + +/************************************************************************* + * EP93xx AC97 audio peripheral handling + *************************************************************************/ +static struct resource ep93xx_ac97_resources[] = { + { + .start = EP93XX_AAC_PHYS_BASE, + .end = EP93XX_AAC_PHYS_BASE + 0xac - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EP93XX_AACINTR, + .end = IRQ_EP93XX_AACINTR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ep93xx_ac97_device = { + .name = "ep93xx-ac97", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_ac97_resources), + .resource = ep93xx_ac97_resources, +}; + +void __init ep93xx_register_ac97(void) +{ + /* + * Make sure that the AC97 pins are not used by I2S. + */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97); + + platform_device_register(&ep93xx_ac97_device); + platform_device_register(&ep93xx_pcm_device); +} + +extern void ep93xx_gpio_init(void); + +void __init ep93xx_init_devices(void) +{ + /* Disallow access to MaverickCrunch initially */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); + + ep93xx_gpio_init(); + + amba_device_register(&uart1_device, &iomem_resource); + amba_device_register(&uart2_device, &iomem_resource); + amba_device_register(&uart3_device, &iomem_resource); + + platform_device_register(&ep93xx_rtc_device); + platform_device_register(&ep93xx_ohci_device); + platform_device_register(&ep93xx_leds); +} -- cgit v1.2.3