From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- arch/arm/common/sa1111.c | 1361 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1361 insertions(+) create mode 100644 arch/arm/common/sa1111.c (limited to 'arch/arm/common/sa1111.c') diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c new file mode 100644 index 00000000..9c49a46a --- /dev/null +++ b/arch/arm/common/sa1111.c @@ -0,0 +1,1361 @@ +/* + * linux/arch/arm/common/sa1111.c + * + * SA1111 support + * + * Original code by John Dorsey + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains all generic SA1111 support. + * + * All initialization functions provided here are intended to be called + * from machine specific code with proper arguments when required. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +/* SA1111 IRQs */ +#define IRQ_GPAIN0 (0) +#define IRQ_GPAIN1 (1) +#define IRQ_GPAIN2 (2) +#define IRQ_GPAIN3 (3) +#define IRQ_GPBIN0 (4) +#define IRQ_GPBIN1 (5) +#define IRQ_GPBIN2 (6) +#define IRQ_GPBIN3 (7) +#define IRQ_GPBIN4 (8) +#define IRQ_GPBIN5 (9) +#define IRQ_GPCIN0 (10) +#define IRQ_GPCIN1 (11) +#define IRQ_GPCIN2 (12) +#define IRQ_GPCIN3 (13) +#define IRQ_GPCIN4 (14) +#define IRQ_GPCIN5 (15) +#define IRQ_GPCIN6 (16) +#define IRQ_GPCIN7 (17) +#define IRQ_MSTXINT (18) +#define IRQ_MSRXINT (19) +#define IRQ_MSSTOPERRINT (20) +#define IRQ_TPTXINT (21) +#define IRQ_TPRXINT (22) +#define IRQ_TPSTOPERRINT (23) +#define SSPXMTINT (24) +#define SSPRCVINT (25) +#define SSPROR (26) +#define AUDXMTDMADONEA (32) +#define AUDRCVDMADONEA (33) +#define AUDXMTDMADONEB (34) +#define AUDRCVDMADONEB (35) +#define AUDTFSR (36) +#define AUDRFSR (37) +#define AUDTUR (38) +#define AUDROR (39) +#define AUDDTS (40) +#define AUDRDD (41) +#define AUDSTO (42) +#define IRQ_USBPWR (43) +#define IRQ_HCIM (44) +#define IRQ_HCIBUFFACC (45) +#define IRQ_HCIRMTWKP (46) +#define IRQ_NHCIMFCIR (47) +#define IRQ_USB_PORT_RESUME (48) +#define IRQ_S0_READY_NINT (49) +#define IRQ_S1_READY_NINT (50) +#define IRQ_S0_CD_VALID (51) +#define IRQ_S1_CD_VALID (52) +#define IRQ_S0_BVD1_STSCHG (53) +#define IRQ_S1_BVD1_STSCHG (54) + +extern void __init sa1110_mb_enable(void); + +/* + * We keep the following data for the overall SA1111. Note that the + * struct device and struct resource are "fake"; they should be supplied + * by the bus above us. However, in the interests of getting all SA1111 + * drivers converted over to the device model, we provide this as an + * anchor point for all the other drivers. + */ +struct sa1111 { + struct device *dev; + struct clk *clk; + unsigned long phys; + int irq; + int irq_base; /* base for cascaded on-chip IRQs */ + spinlock_t lock; + void __iomem *base; +#ifdef CONFIG_PM + void *saved_state; +#endif +}; + +/* + * We _really_ need to eliminate this. Its only users + * are the PWM and DMA checking code. + */ +static struct sa1111 *g_sa1111; + +struct sa1111_dev_info { + unsigned long offset; + unsigned long skpcr_mask; + unsigned int devid; + unsigned int irq[6]; +}; + +static struct sa1111_dev_info sa1111_devices[] = { + { + .offset = SA1111_USB, + .skpcr_mask = SKPCR_UCLKEN, + .devid = SA1111_DEVID_USB, + .irq = { + IRQ_USBPWR, + IRQ_HCIM, + IRQ_HCIBUFFACC, + IRQ_HCIRMTWKP, + IRQ_NHCIMFCIR, + IRQ_USB_PORT_RESUME + }, + }, + { + .offset = 0x0600, + .skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN, + .devid = SA1111_DEVID_SAC, + .irq = { + AUDXMTDMADONEA, + AUDXMTDMADONEB, + AUDRCVDMADONEA, + AUDRCVDMADONEB + }, + }, + { + .offset = 0x0800, + .skpcr_mask = SKPCR_SCLKEN, + .devid = SA1111_DEVID_SSP, + }, + { + .offset = SA1111_KBD, + .skpcr_mask = SKPCR_PTCLKEN, + .devid = SA1111_DEVID_PS2, + .irq = { + IRQ_TPRXINT, + IRQ_TPTXINT + }, + }, + { + .offset = SA1111_MSE, + .skpcr_mask = SKPCR_PMCLKEN, + .devid = SA1111_DEVID_PS2, + .irq = { + IRQ_MSRXINT, + IRQ_MSTXINT + }, + }, + { + .offset = 0x1800, + .skpcr_mask = 0, + .devid = SA1111_DEVID_PCMCIA, + .irq = { + IRQ_S0_READY_NINT, + IRQ_S0_CD_VALID, + IRQ_S0_BVD1_STSCHG, + IRQ_S1_READY_NINT, + IRQ_S1_CD_VALID, + IRQ_S1_BVD1_STSCHG, + }, + }, +}; + +/* + * SA1111 interrupt support. Since clearing an IRQ while there are + * active IRQs causes the interrupt output to pulse, the upper levels + * will call us again if there are more interrupts to process. + */ +static void +sa1111_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned int stat0, stat1, i; + struct sa1111 *sachip = irq_get_handler_data(irq); + void __iomem *mapbase = sachip->base + SA1111_INTC; + + stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0); + stat1 = sa1111_readl(mapbase + SA1111_INTSTATCLR1); + + sa1111_writel(stat0, mapbase + SA1111_INTSTATCLR0); + + desc->irq_data.chip->irq_ack(&desc->irq_data); + + sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1); + + if (stat0 == 0 && stat1 == 0) { + do_bad_IRQ(irq, desc); + return; + } + + for (i = 0; stat0; i++, stat0 >>= 1) + if (stat0 & 1) + generic_handle_irq(i + sachip->irq_base); + + for (i = 32; stat1; i++, stat1 >>= 1) + if (stat1 & 1) + generic_handle_irq(i + sachip->irq_base); + + /* For level-based interrupts */ + desc->irq_data.chip->irq_unmask(&desc->irq_data); +} + +#define SA1111_IRQMASK_LO(x) (1 << (x - sachip->irq_base)) +#define SA1111_IRQMASK_HI(x) (1 << (x - sachip->irq_base - 32)) + +static void sa1111_ack_irq(struct irq_data *d) +{ +} + +static void sa1111_mask_lowirq(struct irq_data *d) +{ + struct sa1111 *sachip = irq_data_get_irq_chip_data(d); + void __iomem *mapbase = sachip->base + SA1111_INTC; + unsigned long ie0; + + ie0 = sa1111_readl(mapbase + SA1111_INTEN0); + ie0 &= ~SA1111_IRQMASK_LO(d->irq); + writel(ie0, mapbase + SA1111_INTEN0); +} + +static void sa1111_unmask_lowirq(struct irq_data *d) +{ + struct sa1111 *sachip = irq_data_get_irq_chip_data(d); + void __iomem *mapbase = sachip->base + SA1111_INTC; + unsigned long ie0; + + ie0 = sa1111_readl(mapbase + SA1111_INTEN0); + ie0 |= SA1111_IRQMASK_LO(d->irq); + sa1111_writel(ie0, mapbase + SA1111_INTEN0); +} + +/* + * Attempt to re-trigger the interrupt. The SA1111 contains a register + * (INTSET) which claims to do this. However, in practice no amount of + * manipulation of INTEN and INTSET guarantees that the interrupt will + * be triggered. In fact, its very difficult, if not impossible to get + * INTSET to re-trigger the interrupt. + */ +static int sa1111_retrigger_lowirq(struct irq_data *d) +{ + struct sa1111 *sachip = irq_data_get_irq_chip_data(d); + void __iomem *mapbase = sachip->base + SA1111_INTC; + unsigned int mask = SA1111_IRQMASK_LO(d->irq); + unsigned long ip0; + int i; + + ip0 = sa1111_readl(mapbase + SA1111_INTPOL0); + for (i = 0; i < 8; i++) { + sa1111_writel(ip0 ^ mask, mapbase + SA1111_INTPOL0); + sa1111_writel(ip0, mapbase + SA1111_INTPOL0); + if (sa1111_readl(mapbase + SA1111_INTSTATCLR0) & mask) + break; + } + + if (i == 8) + printk(KERN_ERR "Danger Will Robinson: failed to " + "re-trigger IRQ%d\n", d->irq); + return i == 8 ? -1 : 0; +} + +static int sa1111_type_lowirq(struct irq_data *d, unsigned int flags) +{ + struct sa1111 *sachip = irq_data_get_irq_chip_data(d); + void __iomem *mapbase = sachip->base + SA1111_INTC; + unsigned int mask = SA1111_IRQMASK_LO(d->irq); + unsigned long ip0; + + if (flags == IRQ_TYPE_PROBE) + return 0; + + if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) + return -EINVAL; + + ip0 = sa1111_readl(mapbase + SA1111_INTPOL0); + if (flags & IRQ_TYPE_EDGE_RISING) + ip0 &= ~mask; + else + ip0 |= mask; + sa1111_writel(ip0, mapbase + SA1111_INTPOL0); + sa1111_writel(ip0, mapbase + SA1111_WAKEPOL0); + + return 0; +} + +static int sa1111_wake_lowirq(struct irq_data *d, unsigned int on) +{ + struct sa1111 *sachip = irq_data_get_irq_chip_data(d); + void __iomem *mapbase = sachip->base + SA1111_INTC; + unsigned int mask = SA1111_IRQMASK_LO(d->irq); + unsigned long we0; + + we0 = sa1111_readl(mapbase + SA1111_WAKEEN0); + if (on) + we0 |= mask; + else + we0 &= ~mask; + sa1111_writel(we0, mapbase + SA1111_WAKEEN0); + + return 0; +} + +static struct irq_chip sa1111_low_chip = { + .name = "SA1111-l", + .irq_ack = sa1111_ack_irq, + .irq_mask = sa1111_mask_lowirq, + .irq_unmask = sa1111_unmask_lowirq, + .irq_retrigger = sa1111_retrigger_lowirq, + .irq_set_type = sa1111_type_lowirq, + .irq_set_wake = sa1111_wake_lowirq, +}; + +static void sa1111_mask_highirq(struct irq_data *d) +{ + struct sa1111 *sachip = irq_data_get_irq_chip_data(d); + void __iomem *mapbase = sachip->base + SA1111_INTC; + unsigned long ie1; + + ie1 = sa1111_readl(mapbase + SA1111_INTEN1); + ie1 &= ~SA1111_IRQMASK_HI(d->irq); + sa1111_writel(ie1, mapbase + SA1111_INTEN1); +} + +static void sa1111_unmask_highirq(struct irq_data *d) +{ + struct sa1111 *sachip = irq_data_get_irq_chip_data(d); + void __iomem *mapbase = sachip->base + SA1111_INTC; + unsigned long ie1; + + ie1 = sa1111_readl(mapbase + SA1111_INTEN1); + ie1 |= SA1111_IRQMASK_HI(d->irq); + sa1111_writel(ie1, mapbase + SA1111_INTEN1); +} + +/* + * Attempt to re-trigger the interrupt. The SA1111 contains a register + * (INTSET) which claims to do this. However, in practice no amount of + * manipulation of INTEN and INTSET guarantees that the interrupt will + * be triggered. In fact, its very difficult, if not impossible to get + * INTSET to re-trigger the interrupt. + */ +static int sa1111_retrigger_highirq(struct irq_data *d) +{ + struct sa1111 *sachip = irq_data_get_irq_chip_data(d); + void __iomem *mapbase = sachip->base + SA1111_INTC; + unsigned int mask = SA1111_IRQMASK_HI(d->irq); + unsigned long ip1; + int i; + + ip1 = sa1111_readl(mapbase + SA1111_INTPOL1); + for (i = 0; i < 8; i++) { + sa1111_writel(ip1 ^ mask, mapbase + SA1111_INTPOL1); + sa1111_writel(ip1, mapbase + SA1111_INTPOL1); + if (sa1111_readl(mapbase + SA1111_INTSTATCLR1) & mask) + break; + } + + if (i == 8) + printk(KERN_ERR "Danger Will Robinson: failed to " + "re-trigger IRQ%d\n", d->irq); + return i == 8 ? -1 : 0; +} + +static int sa1111_type_highirq(struct irq_data *d, unsigned int flags) +{ + struct sa1111 *sachip = irq_data_get_irq_chip_data(d); + void __iomem *mapbase = sachip->base + SA1111_INTC; + unsigned int mask = SA1111_IRQMASK_HI(d->irq); + unsigned long ip1; + + if (flags == IRQ_TYPE_PROBE) + return 0; + + if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) + return -EINVAL; + + ip1 = sa1111_readl(mapbase + SA1111_INTPOL1); + if (flags & IRQ_TYPE_EDGE_RISING) + ip1 &= ~mask; + else + ip1 |= mask; + sa1111_writel(ip1, mapbase + SA1111_INTPOL1); + sa1111_writel(ip1, mapbase + SA1111_WAKEPOL1); + + return 0; +} + +static int sa1111_wake_highirq(struct irq_data *d, unsigned int on) +{ + struct sa1111 *sachip = irq_data_get_irq_chip_data(d); + void __iomem *mapbase = sachip->base + SA1111_INTC; + unsigned int mask = SA1111_IRQMASK_HI(d->irq); + unsigned long we1; + + we1 = sa1111_readl(mapbase + SA1111_WAKEEN1); + if (on) + we1 |= mask; + else + we1 &= ~mask; + sa1111_writel(we1, mapbase + SA1111_WAKEEN1); + + return 0; +} + +static struct irq_chip sa1111_high_chip = { + .name = "SA1111-h", + .irq_ack = sa1111_ack_irq, + .irq_mask = sa1111_mask_highirq, + .irq_unmask = sa1111_unmask_highirq, + .irq_retrigger = sa1111_retrigger_highirq, + .irq_set_type = sa1111_type_highirq, + .irq_set_wake = sa1111_wake_highirq, +}; + +static void sa1111_setup_irq(struct sa1111 *sachip) +{ + void __iomem *irqbase = sachip->base + SA1111_INTC; + unsigned int irq; + + /* + * We're guaranteed that this region hasn't been taken. + */ + request_mem_region(sachip->phys + SA1111_INTC, 512, "irq"); + + /* disable all IRQs */ + sa1111_writel(0, irqbase + SA1111_INTEN0); + sa1111_writel(0, irqbase + SA1111_INTEN1); + sa1111_writel(0, irqbase + SA1111_WAKEEN0); + sa1111_writel(0, irqbase + SA1111_WAKEEN1); + + /* + * detect on rising edge. Note: Feb 2001 Errata for SA1111 + * specifies that S0ReadyInt and S1ReadyInt should be '1'. + */ + sa1111_writel(0, irqbase + SA1111_INTPOL0); + sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) | + SA1111_IRQMASK_HI(IRQ_S1_READY_NINT), + irqbase + SA1111_INTPOL1); + + /* clear all IRQs */ + sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0); + sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1); + + for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) { + irq_set_chip_and_handler(irq, &sa1111_low_chip, + handle_edge_irq); + irq_set_chip_data(irq, sachip); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + + for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) { + irq_set_chip_and_handler(irq, &sa1111_high_chip, + handle_edge_irq); + irq_set_chip_data(irq, sachip); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + + /* + * Register SA1111 interrupt + */ + irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING); + irq_set_handler_data(sachip->irq, sachip); + irq_set_chained_handler(sachip->irq, sa1111_irq_handler); +} + +/* + * Bring the SA1111 out of reset. This requires a set procedure: + * 1. nRESET asserted (by hardware) + * 2. CLK turned on from SA1110 + * 3. nRESET deasserted + * 4. VCO turned on, PLL_BYPASS turned off + * 5. Wait lock time, then assert RCLKEn + * 7. PCR set to allow clocking of individual functions + * + * Until we've done this, the only registers we can access are: + * SBI_SKCR + * SBI_SMCR + * SBI_SKID + */ +static void sa1111_wake(struct sa1111 *sachip) +{ + unsigned long flags, r; + + spin_lock_irqsave(&sachip->lock, flags); + + clk_enable(sachip->clk); + + /* + * Turn VCO on, and disable PLL Bypass. + */ + r = sa1111_readl(sachip->base + SA1111_SKCR); + r &= ~SKCR_VCO_OFF; + sa1111_writel(r, sachip->base + SA1111_SKCR); + r |= SKCR_PLL_BYPASS | SKCR_OE_EN; + sa1111_writel(r, sachip->base + SA1111_SKCR); + + /* + * Wait lock time. SA1111 manual _doesn't_ + * specify a figure for this! We choose 100us. + */ + udelay(100); + + /* + * Enable RCLK. We also ensure that RDYEN is set. + */ + r |= SKCR_RCLKEN | SKCR_RDYEN; + sa1111_writel(r, sachip->base + SA1111_SKCR); + + /* + * Wait 14 RCLK cycles for the chip to finish coming out + * of reset. (RCLK=24MHz). This is 590ns. + */ + udelay(1); + + /* + * Ensure all clocks are initially off. + */ + sa1111_writel(0, sachip->base + SA1111_SKPCR); + + spin_unlock_irqrestore(&sachip->lock, flags); +} + +#ifdef CONFIG_ARCH_SA1100 + +static u32 sa1111_dma_mask[] = { + ~0, + ~(1 << 20), + ~(1 << 23), + ~(1 << 24), + ~(1 << 25), + ~(1 << 20), + ~(1 << 20), + 0, +}; + +/* + * Configure the SA1111 shared memory controller. + */ +void +sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac, + unsigned int cas_latency) +{ + unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC); + + if (cas_latency == 3) + smcr |= SMCR_CLAT; + + sa1111_writel(smcr, sachip->base + SA1111_SMCR); + + /* + * Now clear the bits in the DMA mask to work around the SA1111 + * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion + * Chip Specification Update, June 2000, Erratum #7). + */ + if (sachip->dev->dma_mask) + *sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2]; + + sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2]; +} + +#endif + +static void sa1111_dev_release(struct device *_dev) +{ + struct sa1111_dev *dev = SA1111_DEV(_dev); + + release_resource(&dev->res); + kfree(dev); +} + +static int +sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, + struct sa1111_dev_info *info) +{ + struct sa1111_dev *dev; + int ret; + + dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL); + if (!dev) { + ret = -ENOMEM; + goto out; + } + + dev_set_name(&dev->dev, "%4.4lx", info->offset); + dev->devid = info->devid; + dev->dev.parent = sachip->dev; + dev->dev.bus = &sa1111_bus_type; + dev->dev.release = sa1111_dev_release; + dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask; + dev->res.start = sachip->phys + info->offset; + dev->res.end = dev->res.start + 511; + dev->res.name = dev_name(&dev->dev); + dev->res.flags = IORESOURCE_MEM; + dev->mapbase = sachip->base + info->offset; + dev->skpcr_mask = info->skpcr_mask; + memmove(dev->irq, info->irq, sizeof(dev->irq)); + + ret = request_resource(parent, &dev->res); + if (ret) { + printk("SA1111: failed to allocate resource for %s\n", + dev->res.name); + dev_set_name(&dev->dev, NULL); + kfree(dev); + goto out; + } + + + ret = device_register(&dev->dev); + if (ret) { + release_resource(&dev->res); + kfree(dev); + goto out; + } + +#ifdef CONFIG_DMABOUNCE + /* + * If the parent device has a DMA mask associated with it, + * propagate it down to the children. + */ + if (sachip->dev->dma_mask) { + dev->dma_mask = *sachip->dev->dma_mask; + dev->dev.dma_mask = &dev->dma_mask; + + if (dev->dma_mask != 0xffffffffUL) { + ret = dmabounce_register_dev(&dev->dev, 1024, 4096); + if (ret) { + dev_err(&dev->dev, "SA1111: Failed to register" + " with dmabounce\n"); + device_unregister(&dev->dev); + } + } + } +#endif + +out: + return ret; +} + +/** + * sa1111_probe - probe for a single SA1111 chip. + * @phys_addr: physical address of device. + * + * Probe for a SA1111 chip. This must be called + * before any other SA1111-specific code. + * + * Returns: + * %-ENODEV device not found. + * %-EBUSY physical address already marked in-use. + * %0 successful. + */ +static int __devinit +__sa1111_probe(struct device *me, struct resource *mem, int irq) +{ + struct sa1111 *sachip; + unsigned long id; + unsigned int has_devs; + int i, ret = -ENODEV; + + sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL); + if (!sachip) + return -ENOMEM; + + sachip->clk = clk_get(me, "SA1111_CLK"); + if (IS_ERR(sachip->clk)) { + ret = PTR_ERR(sachip->clk); + goto err_free; + } + + spin_lock_init(&sachip->lock); + + sachip->dev = me; + dev_set_drvdata(sachip->dev, sachip); + + sachip->phys = mem->start; + sachip->irq = irq; + + /* + * Map the whole region. This also maps the + * registers for our children. + */ + sachip->base = ioremap(mem->start, PAGE_SIZE * 2); + if (!sachip->base) { + ret = -ENOMEM; + goto err_clkput; + } + + /* + * Probe for the chip. Only touch the SBI registers. + */ + id = sa1111_readl(sachip->base + SA1111_SKID); + if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { + printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id); + ret = -ENODEV; + goto err_unmap; + } + + printk(KERN_INFO "SA1111 Microprocessor Companion Chip: " + "silicon revision %lx, metal revision %lx\n", + (id & SKID_SIREV_MASK)>>4, (id & SKID_MTREV_MASK)); + + /* + * We found it. Wake the chip up, and initialise. + */ + sa1111_wake(sachip); + +#ifdef CONFIG_ARCH_SA1100 + { + unsigned int val; + + /* + * The SDRAM configuration of the SA1110 and the SA1111 must + * match. This is very important to ensure that SA1111 accesses + * don't corrupt the SDRAM. Note that this ungates the SA1111's + * MBGNT signal, so we must have called sa1110_mb_disable() + * beforehand. + */ + sa1111_configure_smc(sachip, 1, + FExtr(MDCNFG, MDCNFG_SA1110_DRAC0), + FExtr(MDCNFG, MDCNFG_SA1110_TDL0)); + + /* + * We only need to turn on DCLK whenever we want to use the + * DMA. It can otherwise be held firmly in the off position. + * (currently, we always enable it.) + */ + val = sa1111_readl(sachip->base + SA1111_SKPCR); + sa1111_writel(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR); + + /* + * Enable the SA1110 memory bus request and grant signals. + */ + sa1110_mb_enable(); + } +#endif + + /* + * The interrupt controller must be initialised before any + * other device to ensure that the interrupts are available. + */ + if (sachip->irq != NO_IRQ) + sa1111_setup_irq(sachip); + + g_sa1111 = sachip; + + has_devs = ~0; + if (machine_is_assabet() || machine_is_jornada720() || + machine_is_badge4()) + has_devs &= ~(1 << 4); + else + has_devs &= ~(1 << 1); + + for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++) + if (has_devs & (1 << i)) + sa1111_init_one_child(sachip, mem, &sa1111_devices[i]); + + return 0; + + err_unmap: + iounmap(sachip->base); + err_clkput: + clk_put(sachip->clk); + err_free: + kfree(sachip); + return ret; +} + +static int sa1111_remove_one(struct device *dev, void *data) +{ + device_unregister(dev); + return 0; +} + +static void __sa1111_remove(struct sa1111 *sachip) +{ + void __iomem *irqbase = sachip->base + SA1111_INTC; + + device_for_each_child(sachip->dev, NULL, sa1111_remove_one); + + /* disable all IRQs */ + sa1111_writel(0, irqbase + SA1111_INTEN0); + sa1111_writel(0, irqbase + SA1111_INTEN1); + sa1111_writel(0, irqbase + SA1111_WAKEEN0); + sa1111_writel(0, irqbase + SA1111_WAKEEN1); + + clk_disable(sachip->clk); + + if (sachip->irq != NO_IRQ) { + irq_set_chained_handler(sachip->irq, NULL); + irq_set_handler_data(sachip->irq, NULL); + + release_mem_region(sachip->phys + SA1111_INTC, 512); + } + + iounmap(sachip->base); + clk_put(sachip->clk); + kfree(sachip); +} + +/* + * According to the "Intel StrongARM SA-1111 Microprocessor Companion + * Chip Specification Update" (June 2000), erratum #7, there is a + * significant bug in the SA1111 SDRAM shared memory controller. If + * an access to a region of memory above 1MB relative to the bank base, + * it is important that address bit 10 _NOT_ be asserted. Depending + * on the configuration of the RAM, bit 10 may correspond to one + * of several different (processor-relative) address bits. + * + * This routine only identifies whether or not a given DMA address + * is susceptible to the bug. + * + * This should only get called for sa1111_device types due to the + * way we configure our device dma_masks. + */ +int dma_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) +{ + /* + * Section 4.6 of the "Intel StrongARM SA-1111 Development Module + * User's Guide" mentions that jumpers R51 and R52 control the + * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or + * SDRAM bank 1 on Neponset). The default configuration selects + * Assabet, so any address in bank 1 is necessarily invalid. + */ + return ((machine_is_assabet() || machine_is_pfs168()) && + (addr >= 0xc8000000 || (addr + size) >= 0xc8000000)); +} + +struct sa1111_save_data { + unsigned int skcr; + unsigned int skpcr; + unsigned int skcdr; + unsigned char skaud; + unsigned char skpwm0; + unsigned char skpwm1; + + /* + * Interrupt controller + */ + unsigned int intpol0; + unsigned int intpol1; + unsigned int inten0; + unsigned int inten1; + unsigned int wakepol0; + unsigned int wakepol1; + unsigned int wakeen0; + unsigned int wakeen1; +}; + +#ifdef CONFIG_PM + +static int sa1111_suspend(struct platform_device *dev, pm_message_t state) +{ + struct sa1111 *sachip = platform_get_drvdata(dev); + struct sa1111_save_data *save; + unsigned long flags; + unsigned int val; + void __iomem *base; + + save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL); + if (!save) + return -ENOMEM; + sachip->saved_state = save; + + spin_lock_irqsave(&sachip->lock, flags); + + /* + * Save state. + */ + base = sachip->base; + save->skcr = sa1111_readl(base + SA1111_SKCR); + save->skpcr = sa1111_readl(base + SA1111_SKPCR); + save->skcdr = sa1111_readl(base + SA1111_SKCDR); + save->skaud = sa1111_readl(base + SA1111_SKAUD); + save->skpwm0 = sa1111_readl(base + SA1111_SKPWM0); + save->skpwm1 = sa1111_readl(base + SA1111_SKPWM1); + + base = sachip->base + SA1111_INTC; + save->intpol0 = sa1111_readl(base + SA1111_INTPOL0); + save->intpol1 = sa1111_readl(base + SA1111_INTPOL1); + save->inten0 = sa1111_readl(base + SA1111_INTEN0); + save->inten1 = sa1111_readl(base + SA1111_INTEN1); + save->wakepol0 = sa1111_readl(base + SA1111_WAKEPOL0); + save->wakepol1 = sa1111_readl(base + SA1111_WAKEPOL1); + save->wakeen0 = sa1111_readl(base + SA1111_WAKEEN0); + save->wakeen1 = sa1111_readl(base + SA1111_WAKEEN1); + + /* + * Disable. + */ + val = sa1111_readl(sachip->base + SA1111_SKCR); + sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR); + sa1111_writel(0, sachip->base + SA1111_SKPWM0); + sa1111_writel(0, sachip->base + SA1111_SKPWM1); + + clk_disable(sachip->clk); + + spin_unlock_irqrestore(&sachip->lock, flags); + + return 0; +} + +/* + * sa1111_resume - Restore the SA1111 device state. + * @dev: device to restore + * + * Restore the general state of the SA1111; clock control and + * interrupt controller. Other parts of the SA1111 must be + * restored by their respective drivers, and must be called + * via LDM after this function. + */ +static int sa1111_resume(struct platform_device *dev) +{ + struct sa1111 *sachip = platform_get_drvdata(dev); + struct sa1111_save_data *save; + unsigned long flags, id; + void __iomem *base; + + save = sachip->saved_state; + if (!save) + return 0; + + /* + * Ensure that the SA1111 is still here. + * FIXME: shouldn't do this here. + */ + id = sa1111_readl(sachip->base + SA1111_SKID); + if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { + __sa1111_remove(sachip); + platform_set_drvdata(dev, NULL); + kfree(save); + return 0; + } + + /* + * First of all, wake up the chip. + */ + sa1111_wake(sachip); + + /* + * Only lock for write ops. Also, sa1111_wake must be called with + * released spinlock! + */ + spin_lock_irqsave(&sachip->lock, flags); + + sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0); + sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1); + + base = sachip->base; + sa1111_writel(save->skcr, base + SA1111_SKCR); + sa1111_writel(save->skpcr, base + SA1111_SKPCR); + sa1111_writel(save->skcdr, base + SA1111_SKCDR); + sa1111_writel(save->skaud, base + SA1111_SKAUD); + sa1111_writel(save->skpwm0, base + SA1111_SKPWM0); + sa1111_writel(save->skpwm1, base + SA1111_SKPWM1); + + base = sachip->base + SA1111_INTC; + sa1111_writel(save->intpol0, base + SA1111_INTPOL0); + sa1111_writel(save->intpol1, base + SA1111_INTPOL1); + sa1111_writel(save->inten0, base + SA1111_INTEN0); + sa1111_writel(save->inten1, base + SA1111_INTEN1); + sa1111_writel(save->wakepol0, base + SA1111_WAKEPOL0); + sa1111_writel(save->wakepol1, base + SA1111_WAKEPOL1); + sa1111_writel(save->wakeen0, base + SA1111_WAKEEN0); + sa1111_writel(save->wakeen1, base + SA1111_WAKEEN1); + + spin_unlock_irqrestore(&sachip->lock, flags); + + sachip->saved_state = NULL; + kfree(save); + + return 0; +} + +#else +#define sa1111_suspend NULL +#define sa1111_resume NULL +#endif + +static int __devinit sa1111_probe(struct platform_device *pdev) +{ + struct resource *mem; + int irq; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) + return -EINVAL; + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -ENXIO; + + return __sa1111_probe(&pdev->dev, mem, irq); +} + +static int sa1111_remove(struct platform_device *pdev) +{ + struct sa1111 *sachip = platform_get_drvdata(pdev); + + if (sachip) { +#ifdef CONFIG_PM + kfree(sachip->saved_state); + sachip->saved_state = NULL; +#endif + __sa1111_remove(sachip); + platform_set_drvdata(pdev, NULL); + } + + return 0; +} + +/* + * Not sure if this should be on the system bus or not yet. + * We really want some way to register a system device at + * the per-machine level, and then have this driver pick + * up the registered devices. + * + * We also need to handle the SDRAM configuration for + * PXA250/SA1110 machine classes. + */ +static struct platform_driver sa1111_device_driver = { + .probe = sa1111_probe, + .remove = sa1111_remove, + .suspend = sa1111_suspend, + .resume = sa1111_resume, + .driver = { + .name = "sa1111", + }, +}; + +/* + * Get the parent device driver (us) structure + * from a child function device + */ +static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev) +{ + return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent); +} + +/* + * The bits in the opdiv field are non-linear. + */ +static unsigned char opdiv_table[] = { 1, 4, 2, 8 }; + +static unsigned int __sa1111_pll_clock(struct sa1111 *sachip) +{ + unsigned int skcdr, fbdiv, ipdiv, opdiv; + + skcdr = sa1111_readl(sachip->base + SA1111_SKCDR); + + fbdiv = (skcdr & 0x007f) + 2; + ipdiv = ((skcdr & 0x0f80) >> 7) + 2; + opdiv = opdiv_table[(skcdr & 0x3000) >> 12]; + + return 3686400 * fbdiv / (ipdiv * opdiv); +} + +/** + * sa1111_pll_clock - return the current PLL clock frequency. + * @sadev: SA1111 function block + * + * BUG: we should look at SKCR. We also blindly believe that + * the chip is being fed with the 3.6864MHz clock. + * + * Returns the PLL clock in Hz. + */ +unsigned int sa1111_pll_clock(struct sa1111_dev *sadev) +{ + struct sa1111 *sachip = sa1111_chip_driver(sadev); + + return __sa1111_pll_clock(sachip); +} +EXPORT_SYMBOL(sa1111_pll_clock); + +/** + * sa1111_select_audio_mode - select I2S or AC link mode + * @sadev: SA1111 function block + * @mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S + * + * Frob the SKCR to select AC Link mode or I2S mode for + * the audio block. + */ +void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode) +{ + struct sa1111 *sachip = sa1111_chip_driver(sadev); + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&sachip->lock, flags); + + val = sa1111_readl(sachip->base + SA1111_SKCR); + if (mode == SA1111_AUDIO_I2S) { + val &= ~SKCR_SELAC; + } else { + val |= SKCR_SELAC; + } + sa1111_writel(val, sachip->base + SA1111_SKCR); + + spin_unlock_irqrestore(&sachip->lock, flags); +} +EXPORT_SYMBOL(sa1111_select_audio_mode); + +/** + * sa1111_set_audio_rate - set the audio sample rate + * @sadev: SA1111 SAC function block + * @rate: sample rate to select + */ +int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate) +{ + struct sa1111 *sachip = sa1111_chip_driver(sadev); + unsigned int div; + + if (sadev->devid != SA1111_DEVID_SAC) + return -EINVAL; + + div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate; + if (div == 0) + div = 1; + if (div > 128) + div = 128; + + sa1111_writel(div - 1, sachip->base + SA1111_SKAUD); + + return 0; +} +EXPORT_SYMBOL(sa1111_set_audio_rate); + +/** + * sa1111_get_audio_rate - get the audio sample rate + * @sadev: SA1111 SAC function block device + */ +int sa1111_get_audio_rate(struct sa1111_dev *sadev) +{ + struct sa1111 *sachip = sa1111_chip_driver(sadev); + unsigned long div; + + if (sadev->devid != SA1111_DEVID_SAC) + return -EINVAL; + + div = sa1111_readl(sachip->base + SA1111_SKAUD) + 1; + + return __sa1111_pll_clock(sachip) / (256 * div); +} +EXPORT_SYMBOL(sa1111_get_audio_rate); + +void sa1111_set_io_dir(struct sa1111_dev *sadev, + unsigned int bits, unsigned int dir, + unsigned int sleep_dir) +{ + struct sa1111 *sachip = sa1111_chip_driver(sadev); + unsigned long flags; + unsigned int val; + void __iomem *gpio = sachip->base + SA1111_GPIO; + +#define MODIFY_BITS(port, mask, dir) \ + if (mask) { \ + val = sa1111_readl(port); \ + val &= ~(mask); \ + val |= (dir) & (mask); \ + sa1111_writel(val, port); \ + } + + spin_lock_irqsave(&sachip->lock, flags); + MODIFY_BITS(gpio + SA1111_GPIO_PADDR, bits & 15, dir); + MODIFY_BITS(gpio + SA1111_GPIO_PBDDR, (bits >> 8) & 255, dir >> 8); + MODIFY_BITS(gpio + SA1111_GPIO_PCDDR, (bits >> 16) & 255, dir >> 16); + + MODIFY_BITS(gpio + SA1111_GPIO_PASDR, bits & 15, sleep_dir); + MODIFY_BITS(gpio + SA1111_GPIO_PBSDR, (bits >> 8) & 255, sleep_dir >> 8); + MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16); + spin_unlock_irqrestore(&sachip->lock, flags); +} +EXPORT_SYMBOL(sa1111_set_io_dir); + +void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v) +{ + struct sa1111 *sachip = sa1111_chip_driver(sadev); + unsigned long flags; + unsigned int val; + void __iomem *gpio = sachip->base + SA1111_GPIO; + + spin_lock_irqsave(&sachip->lock, flags); + MODIFY_BITS(gpio + SA1111_GPIO_PADWR, bits & 15, v); + MODIFY_BITS(gpio + SA1111_GPIO_PBDWR, (bits >> 8) & 255, v >> 8); + MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16); + spin_unlock_irqrestore(&sachip->lock, flags); +} +EXPORT_SYMBOL(sa1111_set_io); + +void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v) +{ + struct sa1111 *sachip = sa1111_chip_driver(sadev); + unsigned long flags; + unsigned int val; + void __iomem *gpio = sachip->base + SA1111_GPIO; + + spin_lock_irqsave(&sachip->lock, flags); + MODIFY_BITS(gpio + SA1111_GPIO_PASSR, bits & 15, v); + MODIFY_BITS(gpio + SA1111_GPIO_PBSSR, (bits >> 8) & 255, v >> 8); + MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16); + spin_unlock_irqrestore(&sachip->lock, flags); +} +EXPORT_SYMBOL(sa1111_set_sleep_io); + +/* + * Individual device operations. + */ + +/** + * sa1111_enable_device - enable an on-chip SA1111 function block + * @sadev: SA1111 function block device to enable + */ +void sa1111_enable_device(struct sa1111_dev *sadev) +{ + struct sa1111 *sachip = sa1111_chip_driver(sadev); + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&sachip->lock, flags); + val = sa1111_readl(sachip->base + SA1111_SKPCR); + sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR); + spin_unlock_irqrestore(&sachip->lock, flags); +} +EXPORT_SYMBOL(sa1111_enable_device); + +/** + * sa1111_disable_device - disable an on-chip SA1111 function block + * @sadev: SA1111 function block device to disable + */ +void sa1111_disable_device(struct sa1111_dev *sadev) +{ + struct sa1111 *sachip = sa1111_chip_driver(sadev); + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&sachip->lock, flags); + val = sa1111_readl(sachip->base + SA1111_SKPCR); + sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR); + spin_unlock_irqrestore(&sachip->lock, flags); +} +EXPORT_SYMBOL(sa1111_disable_device); + +/* + * SA1111 "Register Access Bus." + * + * We model this as a regular bus type, and hang devices directly + * off this. + */ +static int sa1111_match(struct device *_dev, struct device_driver *_drv) +{ + struct sa1111_dev *dev = SA1111_DEV(_dev); + struct sa1111_driver *drv = SA1111_DRV(_drv); + + return dev->devid == drv->devid; +} + +static int sa1111_bus_suspend(struct device *dev, pm_message_t state) +{ + struct sa1111_dev *sadev = SA1111_DEV(dev); + struct sa1111_driver *drv = SA1111_DRV(dev->driver); + int ret = 0; + + if (drv && drv->suspend) + ret = drv->suspend(sadev, state); + return ret; +} + +static int sa1111_bus_resume(struct device *dev) +{ + struct sa1111_dev *sadev = SA1111_DEV(dev); + struct sa1111_driver *drv = SA1111_DRV(dev->driver); + int ret = 0; + + if (drv && drv->resume) + ret = drv->resume(sadev); + return ret; +} + +static int sa1111_bus_probe(struct device *dev) +{ + struct sa1111_dev *sadev = SA1111_DEV(dev); + struct sa1111_driver *drv = SA1111_DRV(dev->driver); + int ret = -ENODEV; + + if (drv->probe) + ret = drv->probe(sadev); + return ret; +} + +static int sa1111_bus_remove(struct device *dev) +{ + struct sa1111_dev *sadev = SA1111_DEV(dev); + struct sa1111_driver *drv = SA1111_DRV(dev->driver); + int ret = 0; + + if (drv->remove) + ret = drv->remove(sadev); + return ret; +} + +struct bus_type sa1111_bus_type = { + .name = "sa1111-rab", + .match = sa1111_match, + .probe = sa1111_bus_probe, + .remove = sa1111_bus_remove, + .suspend = sa1111_bus_suspend, + .resume = sa1111_bus_resume, +}; +EXPORT_SYMBOL(sa1111_bus_type); + +int sa1111_driver_register(struct sa1111_driver *driver) +{ + driver->drv.bus = &sa1111_bus_type; + return driver_register(&driver->drv); +} +EXPORT_SYMBOL(sa1111_driver_register); + +void sa1111_driver_unregister(struct sa1111_driver *driver) +{ + driver_unregister(&driver->drv); +} +EXPORT_SYMBOL(sa1111_driver_unregister); + +static int __init sa1111_init(void) +{ + int ret = bus_register(&sa1111_bus_type); + if (ret == 0) + platform_driver_register(&sa1111_device_driver); + return ret; +} + +static void __exit sa1111_exit(void) +{ + platform_driver_unregister(&sa1111_device_driver); + bus_unregister(&sa1111_bus_type); +} + +subsys_initcall(sa1111_init); +module_exit(sa1111_exit); + +MODULE_DESCRIPTION("Intel Corporation SA1111 core driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3