From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- Documentation/timers/highres.txt | 249 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 249 insertions(+) create mode 100644 Documentation/timers/highres.txt (limited to 'Documentation/timers/highres.txt') diff --git a/Documentation/timers/highres.txt b/Documentation/timers/highres.txt new file mode 100644 index 00000000..21332233 --- /dev/null +++ b/Documentation/timers/highres.txt @@ -0,0 +1,249 @@ +High resolution timers and dynamic ticks design notes +----------------------------------------------------- + +Further information can be found in the paper of the OLS 2006 talk "hrtimers +and beyond". The paper is part of the OLS 2006 Proceedings Volume 1, which can +be found on the OLS website: +http://www.linuxsymposium.org/2006/linuxsymposium_procv1.pdf + +The slides to this talk are available from: +http://tglx.de/projects/hrtimers/ols2006-hrtimers.pdf + +The slides contain five figures (pages 2, 15, 18, 20, 22), which illustrate the +changes in the time(r) related Linux subsystems. Figure #1 (p. 2) shows the +design of the Linux time(r) system before hrtimers and other building blocks +got merged into mainline. + +Note: the paper and the slides are talking about "clock event source", while we +switched to the name "clock event devices" in meantime. + +The design contains the following basic building blocks: + +- hrtimer base infrastructure +- timeofday and clock source management +- clock event management +- high resolution timer functionality +- dynamic ticks + + +hrtimer base infrastructure +--------------------------- + +The hrtimer base infrastructure was merged into the 2.6.16 kernel. Details of +the base implementation are covered in Documentation/hrtimers/hrtimer.txt. See +also figure #2 (OLS slides p. 15) + +The main differences to the timer wheel, which holds the armed timer_list type +timers are: + - time ordered enqueueing into a rb-tree + - independent of ticks (the processing is based on nanoseconds) + + +timeofday and clock source management +------------------------------------- + +John Stultz's Generic Time Of Day (GTOD) framework moves a large portion of +code out of the architecture-specific areas into a generic management +framework, as illustrated in figure #3 (OLS slides p. 18). The architecture +specific portion is reduced to the low level hardware details of the clock +sources, which are registered in the framework and selected on a quality based +decision. The low level code provides hardware setup and readout routines and +initializes data structures, which are used by the generic time keeping code to +convert the clock ticks to nanosecond based time values. All other time keeping +related functionality is moved into the generic code. The GTOD base patch got +merged into the 2.6.18 kernel. + +Further information about the Generic Time Of Day framework is available in the +OLS 2005 Proceedings Volume 1: +http://www.linuxsymposium.org/2005/linuxsymposium_procv1.pdf + +The paper "We Are Not Getting Any Younger: A New Approach to Time and +Timers" was written by J. Stultz, D.V. Hart, & N. Aravamudan. + +Figure #3 (OLS slides p.18) illustrates the transformation. + + +clock event management +---------------------- + +While clock sources provide read access to the monotonically increasing time +value, clock event devices are used to schedule the next event +interrupt(s). The next event is currently defined to be periodic, with its +period defined at compile time. The setup and selection of the event device +for various event driven functionalities is hardwired into the architecture +dependent code. This results in duplicated code across all architectures and +makes it extremely difficult to change the configuration of the system to use +event interrupt devices other than those already built into the +architecture. Another implication of the current design is that it is necessary +to touch all the architecture-specific implementations in order to provide new +functionality like high resolution timers or dynamic ticks. + +The clock events subsystem tries to address this problem by providing a generic +solution to manage clock event devices and their usage for the various clock +event driven kernel functionalities. The goal of the clock event subsystem is +to minimize the clock event related architecture dependent code to the pure +hardware related handling and to allow easy addition and utilization of new +clock event devices. It also minimizes the duplicated code across the +architectures as it provides generic functionality down to the interrupt +service handler, which is almost inherently hardware dependent. + +Clock event devices are registered either by the architecture dependent boot +code or at module insertion time. Each clock event device fills a data +structure with clock-specific property parameters and callback functions. The +clock event management decides, by using the specified property parameters, the +set of system functions a clock event device will be used to support. This +includes the distinction of per-CPU and per-system global event devices. + +System-level global event devices are used for the Linux periodic tick. Per-CPU +event devices are used to provide local CPU functionality such as process +accounting, profiling, and high resolution timers. + +The management layer assigns one or more of the following functions to a clock +event device: + - system global periodic tick (jiffies update) + - cpu local update_process_times + - cpu local profiling + - cpu local next event interrupt (non periodic mode) + +The clock event device delegates the selection of those timer interrupt related +functions completely to the management layer. The clock management layer stores +a function pointer in the device description structure, which has to be called +from the hardware level handler. This removes a lot of duplicated code from the +architecture specific timer interrupt handlers and hands the control over the +clock event devices and the assignment of timer interrupt related functionality +to the core code. + +The clock event layer API is rather small. Aside from the clock event device +registration interface it provides functions to schedule the next event +interrupt, clock event device notification service and support for suspend and +resume. + +The framework adds about 700 lines of code which results in a 2KB increase of +the kernel binary size. The conversion of i386 removes about 100 lines of +code. The binary size decrease is in the range of 400 byte. We believe that the +increase of flexibility and the avoidance of duplicated code across +architectures justifies the slight increase of the binary size. + +The conversion of an architecture has no functional impact, but allows to +utilize the high resolution and dynamic tick functionalities without any change +to the clock event device and timer interrupt code. After the conversion the +enabling of high resolution timers and dynamic ticks is simply provided by +adding the kernel/time/Kconfig file to the architecture specific Kconfig and +adding the dynamic tick specific calls to the idle routine (a total of 3 lines +added to the idle function and the Kconfig file) + +Figure #4 (OLS slides p.20) illustrates the transformation. + + +high resolution timer functionality +----------------------------------- + +During system boot it is not possible to use the high resolution timer +functionality, while making it possible would be difficult and would serve no +useful function. The initialization of the clock event device framework, the +clock source framework (GTOD) and hrtimers itself has to be done and +appropriate clock sources and clock event devices have to be registered before +the high resolution functionality can work. Up to the point where hrtimers are +initialized, the system works in the usual low resolution periodic mode. The +clock source and the clock event device layers provide notification functions +which inform hrtimers about availability of new hardware. hrtimers validates +the usability of the registered clock sources and clock event devices before +switching to high resolution mode. This ensures also that a kernel which is +configured for high resolution timers can run on a system which lacks the +necessary hardware support. + +The high resolution timer code does not support SMP machines which have only +global clock event devices. The support of such hardware would involve IPI +calls when an interrupt happens. The overhead would be much larger than the +benefit. This is the reason why we currently disable high resolution and +dynamic ticks on i386 SMP systems which stop the local APIC in C3 power +state. A workaround is available as an idea, but the problem has not been +tackled yet. + +The time ordered insertion of timers provides all the infrastructure to decide +whether the event device has to be reprogrammed when a timer is added. The +decision is made per timer base and synchronized across per-cpu timer bases in +a support function. The design allows the system to utilize separate per-CPU +clock event devices for the per-CPU timer bases, but currently only one +reprogrammable clock event device per-CPU is utilized. + +When the timer interrupt happens, the next event interrupt handler is called +from the clock event distribution code and moves expired timers from the +red-black tree to a separate double linked list and invokes the softirq +handler. An additional mode field in the hrtimer structure allows the system to +execute callback functions directly from the next event interrupt handler. This +is restricted to code which can safely be executed in the hard interrupt +context. This applies, for example, to the common case of a wakeup function as +used by nanosleep. The advantage of executing the handler in the interrupt +context is the avoidance of up to two context switches - from the interrupted +context to the softirq and to the task which is woken up by the expired +timer. + +Once a system has switched to high resolution mode, the periodic tick is +switched off. This disables the per system global periodic clock event device - +e.g. the PIT on i386 SMP systems. + +The periodic tick functionality is provided by an per-cpu hrtimer. The callback +function is executed in the next event interrupt context and updates jiffies +and calls update_process_times and profiling. The implementation of the hrtimer +based periodic tick is designed to be extended with dynamic tick functionality. +This allows to use a single clock event device to schedule high resolution +timer and periodic events (jiffies tick, profiling, process accounting) on UP +systems. This has been proved to work with the PIT on i386 and the Incrementer +on PPC. + +The softirq for running the hrtimer queues and executing the callbacks has been +separated from the tick bound timer softirq to allow accurate delivery of high +resolution timer signals which are used by itimer and POSIX interval +timers. The execution of this softirq can still be delayed by other softirqs, +but the overall latencies have been significantly improved by this separation. + +Figure #5 (OLS slides p.22) illustrates the transformation. + + +dynamic ticks +------------- + +Dynamic ticks are the logical consequence of the hrtimer based periodic tick +replacement (sched_tick). The functionality of the sched_tick hrtimer is +extended by three functions: + +- hrtimer_stop_sched_tick +- hrtimer_restart_sched_tick +- hrtimer_update_jiffies + +hrtimer_stop_sched_tick() is called when a CPU goes into idle state. The code +evaluates the next scheduled timer event (from both hrtimers and the timer +wheel) and in case that the next event is further away than the next tick it +reprograms the sched_tick to this future event, to allow longer idle sleeps +without worthless interruption by the periodic tick. The function is also +called when an interrupt happens during the idle period, which does not cause a +reschedule. The call is necessary as the interrupt handler might have armed a +new timer whose expiry time is before the time which was identified as the +nearest event in the previous call to hrtimer_stop_sched_tick. + +hrtimer_restart_sched_tick() is called when the CPU leaves the idle state before +it calls schedule(). hrtimer_restart_sched_tick() resumes the periodic tick, +which is kept active until the next call to hrtimer_stop_sched_tick(). + +hrtimer_update_jiffies() is called from irq_enter() when an interrupt happens +in the idle period to make sure that jiffies are up to date and the interrupt +handler has not to deal with an eventually stale jiffy value. + +The dynamic tick feature provides statistical values which are exported to +userspace via /proc/stats and can be made available for enhanced power +management control. + +The implementation leaves room for further development like full tickless +systems, where the time slice is controlled by the scheduler, variable +frequency profiling, and a complete removal of jiffies in the future. + + +Aside the current initial submission of i386 support, the patchset has been +extended to x86_64 and ARM already. Initial (work in progress) support is also +available for MIPS and PowerPC. + + Thomas, Ingo + + + -- cgit v1.2.3