From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- Documentation/sound/oss/PSS-updates | 88 +++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 Documentation/sound/oss/PSS-updates (limited to 'Documentation/sound/oss/PSS-updates') diff --git a/Documentation/sound/oss/PSS-updates b/Documentation/sound/oss/PSS-updates new file mode 100644 index 00000000..c84dd759 --- /dev/null +++ b/Documentation/sound/oss/PSS-updates @@ -0,0 +1,88 @@ + This file contains notes for users of PSS sound cards who wish to use the +newly added features of the newest version of this driver. + + The major enhancements present in this new revision of this driver is the +addition of two new module parameters that allow you to take full advantage of +all the features present on your PSS sound card. These features include the +ability to enable both the builtin CDROM and joystick ports. + +pss_enable_joystick + + This parameter is basically a flag. A 0 will leave the joystick port +disabled, while a non-zero value would enable the joystick port. The default +setting is pss_enable_joystick=0 as this keeps this driver fully compatible +with systems that were using previous versions of this driver. If you wish to +enable the joystick port you will have to add pss_enable_joystick=1 as an +argument to the driver. To actually use the joystick port you will then have +to load the joystick driver itself. Just remember to load the joystick driver +AFTER the pss sound driver. + +pss_cdrom_port + + This parameter takes a port address as its parameter. Any available port +address can be specified to enable the CDROM port, except for 0x0 and -1 as +these values would leave the port disabled. Like the joystick port, the cdrom +port will require that an appropriate CDROM driver be loaded before you can make +use of the newly enabled CDROM port. Like the joystick port option above, +remember to load the CDROM driver AFTER the pss sound driver. While it may +differ on some PSS sound cards, all the PSS sound cards that I have seen have a +builtin Wearnes CDROM port. If this is the case with your PSS sound card you +should load aztcd with the appropriate port option that matches the port you +assigned to the CDROM port when you loaded your pss sound driver. (ex. +modprobe pss pss_cdrom_port=0x340 && modprobe aztcd aztcd=0x340) The default +setting of this parameter leaves the CDROM port disabled to maintain full +compatibility with systems using previous versions of this driver. + + Other options have also been added for the added convenience and utility +of the user. These options are only available if this driver is loaded as a +module. + +pss_no_sound + + This module parameter is a flag that can be used to tell the driver to +just configure non-sound components. 0 configures all components, a non-0 +value will only attept to configure the CDROM and joystick ports. This +parameter can be used by a user who only wished to use the builtin joystick +and/or CDROM port(s) of his PSS sound card. If this driver is loaded with this +parameter and with the parameter below set to true then a user can safely unload +this driver with the following command "rmmod pss && rmmod ad1848 && rmmod +mpu401 && rmmod sound && rmmod soundcore" and retain the full functionality of +his CDROM and/or joystick port(s) while gaining back the memory previously used +by the sound drivers. This default setting of this parameter is 0 to retain +full behavioral compatibility with previous versions of this driver. + +pss_keep_settings + + This parameter can be used to specify whether you want the driver to reset +all emulations whenever its unloaded. This can be useful for those who are +sharing resources (io ports, IRQ's, DMA's) between different ISA cards. This +flag can also be useful in that future versions of this driver may reset all +emulations by default on the driver's unloading (as it probably should), so +specifying it now will ensure that all future versions of this driver will +continue to work as expected. The default value of this parameter is 1 to +retain full behavioral compatibility with previous versions of this driver. + +pss_firmware + + This parameter can be used to specify the file containing the firmware +code so that a user could tell the driver where that file is located instead +of having to put it in a predefined location with a predefined name. The +default setting of this parameter is "/etc/sound/pss_synth" as this was the +path and filename the hardcoded value in the previous versions of this driver. + +Examples: + +# Normal PSS sound card system, loading of drivers. +# Should be specified in an rc file (ex. Slackware uses /etc/rc.d/rc.modules). + +/sbin/modprobe pss pss_io=0x220 mpu_io=0x338 mpu_irq=9 mss_io=0x530 mss_irq=10 mss_dma=1 pss_cdrom_port=0x340 pss_enable_joystick=1 +/sbin/modprobe aztcd aztcd=0x340 +/sbin/modprobe joystick + +# System using the PSS sound card just for its CDROM and joystick ports. +# Should be specified in an rc file (ex. Slackware uses /etc/rc.d/rc.modules). + +/sbin/modprobe pss pss_io=0x220 pss_cdrom_port=0x340 pss_enable_joystick=1 pss_no_sound=1 +/sbin/rmmod pss && /sbin/rmmod ad1848 && /sbin/rmmod mpu401 && /sbin/rmmod sound && /sbin/rmmod soundcore # This line not needed, but saves memory. +/sbin/modprobe aztcd aztcd=0x340 +/sbin/modprobe joystick -- cgit v1.2.3