From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- Documentation/sound/alsa/Bt87x.txt | 78 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 Documentation/sound/alsa/Bt87x.txt (limited to 'Documentation/sound/alsa/Bt87x.txt') diff --git a/Documentation/sound/alsa/Bt87x.txt b/Documentation/sound/alsa/Bt87x.txt new file mode 100644 index 00000000..f158cde8 --- /dev/null +++ b/Documentation/sound/alsa/Bt87x.txt @@ -0,0 +1,78 @@ +Intro +===== + +You might have noticed that the bt878 grabber cards have actually +_two_ PCI functions: + +$ lspci +[ ... ] +00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02) +00:0a.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02) +[ ... ] + +The first does video, it is backward compatible to the bt848. The second +does audio. snd-bt87x is a driver for the second function. It's a sound +driver which can be used for recording sound (and _only_ recording, no +playback). As most TV cards come with a short cable which can be plugged +into your sound card's line-in you probably don't need this driver if all +you want to do is just watching TV... + +Some cards do not bother to connect anything to the audio input pins of +the chip, and some other cards use the audio function to transport MPEG +video data, so it's quite possible that audio recording may not work +with your card. + + +Driver Status +============= + +The driver is now stable. However, it doesn't know about many TV cards, +and it refuses to load for cards it doesn't know. + +If the driver complains ("Unknown TV card found, the audio driver will +not load"), you can specify the load_all=1 option to force the driver to +try to use the audio capture function of your card. If the frequency of +recorded data is not right, try to specify the digital_rate option with +other values than the default 32000 (often it's 44100 or 64000). + +If you have an unknown card, please mail the ID and board name to +, regardless of whether audio capture works +or not, so that future versions of this driver know about your card. + + +Audio modes +=========== + +The chip knows two different modes (digital/analog). snd-bt87x +registers two PCM devices, one for each mode. They cannot be used at +the same time. + + +Digital audio mode +================== + +The first device (hw:X,0) gives you 16 bit stereo sound. The sample +rate depends on the external source which feeds the Bt87x with digital +sound via I2S interface. + + +Analog audio mode (A/D) +======================= + +The second device (hw:X,1) gives you 8 or 16 bit mono sound. Supported +sample rates are between 119466 and 448000 Hz (yes, these numbers are +that high). If you've set the CONFIG_SND_BT87X_OVERCLOCK option, the +maximum sample rate is 1792000 Hz, but audio data becomes unusable +beyond 896000 Hz on my card. + +The chip has three analog inputs. Consequently you'll get a mixer +device to control these. + + +Have fun, + + Clemens + + +Written by Clemens Ladisch +big parts copied from btaudio.txt by Gerd Knorr -- cgit v1.2.3