From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- Documentation/scsi/aic79xx.txt | 497 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 497 insertions(+) create mode 100644 Documentation/scsi/aic79xx.txt (limited to 'Documentation/scsi/aic79xx.txt') diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt new file mode 100644 index 00000000..64ac7093 --- /dev/null +++ b/Documentation/scsi/aic79xx.txt @@ -0,0 +1,497 @@ +==================================================================== += Adaptec Ultra320 Family Manager Set = += = += README for = += The Linux Operating System = +==================================================================== + +The following information is available in this file: + + 1. Supported Hardware + 2. Version History + 3. Command Line Options + 4. Additional Notes + 5. Contacting Adaptec + + +1. Supported Hardware + + The following Adaptec SCSI Host Adapters are supported by this + driver set. + + Ultra320 ASIC Description + ---------------------------------------------------------------- + AIC-7901A Single Channel 64-bit PCI-X 133MHz to + Ultra320 SCSI ASIC + AIC-7901B Single Channel 64-bit PCI-X 133MHz to + Ultra320 SCSI ASIC with Retained Training + AIC-7902A4 Dual Channel 64-bit PCI-X 133MHz to + Ultra320 SCSI ASIC + AIC-7902B Dual Channel 64-bit PCI-X 133MHz to + Ultra320 SCSI ASIC with Retained Training + + Ultra320 Adapters Description ASIC + -------------------------------------------------------------------------- + Adaptec SCSI Card 39320 Dual Channel 64-bit PCI-X 133MHz to 7902A4/7902B + Ultra320 SCSI Card (one external + 68-pin, two internal 68-pin) + Adaptec SCSI Card 39320A Dual Channel 64-bit PCI-X 133MHz to 7902B + Ultra320 SCSI Card (one external + 68-pin, two internal 68-pin) + Adaptec SCSI Card 39320D Dual Channel 64-bit PCI-X 133MHz to 7902A4 + Ultra320 SCSI Card (two external VHDC + and one internal 68-pin) + Adaptec SCSI Card 39320D Dual Channel 64-bit PCI-X 133MHz to 7902A4 + Ultra320 SCSI Card (two external VHDC + and one internal 68-pin) based on the + AIC-7902B ASIC + Adaptec SCSI Card 29320 Single Channel 64-bit PCI-X 133MHz to 7901A + Ultra320 SCSI Card (one external + 68-pin, two internal 68-pin, one + internal 50-pin) + Adaptec SCSI Card 29320A Single Channel 64-bit PCI-X 133MHz to 7901B + Ultra320 SCSI Card (one external + 68-pin, two internal 68-pin, one + internal 50-pin) + Adaptec SCSI Card 29320LP Single Channel 64-bit Low Profile 7901A + PCI-X 133MHz to Ultra320 SCSI Card + (One external VHDC, one internal + 68-pin) + Adaptec SCSI Card 29320ALP Single Channel 64-bit Low Profile 7901B + PCI-X 133MHz to Ultra320 SCSI Card + (One external VHDC, one internal + 68-pin) +2. Version History + + 3.0 (December 1st, 2005) + - Updated driver to use SCSI transport class infrastructure + - Upported sequencer and core fixes from adaptec released + version 2.0.15 of the driver. + + 1.3.11 (July 11, 2003) + - Fix several deadlock issues. + - Add 29320ALP and 39320B Id's. + + 1.3.10 (June 3rd, 2003) + - Align the SCB_TAG field on a 16byte boundary. This avoids + SCB corruption on some PCI-33 busses. + - Correct non-zero luns on Rev B. hardware. + - Update for change in 2.5.X SCSI proc FS interface. + - When negotiation async via an 8bit WDTR message, send + an SDTR with an offset of 0 to be sure the target + knows we are async. This works around a firmware defect + in the Quantum Atlas 10K. + - Implement controller suspend and resume. + - Clear PCI error state during driver attach so that we + don't disable memory mapped I/O due to a stray write + by some other driver probe that occurred before we + claimed the controller. + + 1.3.9 (May 22nd, 2003) + - Fix compiler errors. + - Remove S/G splitting for segments that cross a 4GB boundary. + This is guaranteed not to happen in Linux. + - Add support for scsi_report_device_reset() found in + 2.5.X kernels. + - Add 7901B support. + - Simplify handling of the packetized lun Rev A workaround. + - Correct and simplify handling of the ignore wide residue + message. The previous code would fail to report a residual + if the transaction data length was even and we received + an IWR message. + + 1.3.8 (April 29th, 2003) + - Fix types accessed via the command line interface code. + - Perform a few firmware optimizations. + - Fix "Unexpected PKT busfree" errors. + - Use a sequencer interrupt to notify the host of + commands with bad status. We defer the notification + until there are no outstanding selections to ensure + that the host is interrupted for as short a time as + possible. + - Remove pre-2.2.X support. + - Add support for new 2.5.X interrupt API. + - Correct big-endian architecture support. + + 1.3.7 (April 16th, 2003) + - Use del_timer_sync() to ensure that no timeouts + are pending during controller shutdown. + - For pre-2.5.X kernels, carefully adjust our segment + list size to avoid SCSI malloc pool fragmentation. + - Cleanup channel display in our /proc output. + - Workaround duplicate device entries in the mid-layer + device list during add-single-device. + + 1.3.6 (March 28th, 2003) + - Correct a double free in the Domain Validation code. + - Correct a reference to free'ed memory during controller + shutdown. + - Reset the bus on an SE->LVD change. This is required + to reset our transceivers. + + 1.3.5 (March 24th, 2003) + - Fix a few register window mode bugs. + - Include read streaming in the PPR flags we display in + diagnostics as well as /proc. + - Add PCI hot plug support for 2.5.X kernels. + - Correct default precompensation value for RevA hardware. + - Fix Domain Validation thread shutdown. + - Add a firmware workaround to make the LED blink + brighter during packetized operations on the H2A4. + - Correct /proc display of user read streaming settings. + - Simplify driver locking by releasing the io_request_lock + upon driver entry from the mid-layer. + - Cleanup command line parsing and move much of this code + to aiclib. + + 1.3.4 (February 28th, 2003) + - Correct a race condition in our error recovery handler. + - Allow Test Unit Ready commands to take a full 5 seconds + during Domain Validation. + + 1.3.2 (February 19th, 2003) + - Correct a Rev B. regression due to the GEM318 + compatibility fix included in 1.3.1. + + 1.3.1 (February 11th, 2003) + - Add support for the 39320A. + - Improve recovery for certain PCI-X errors. + - Fix handling of LQ/DATA/LQ/DATA for the + same write transaction that can occur without + interveining training. + - Correct compatibility issues with the GEM318 + enclosure services device. + - Correct data corruption issue that occurred under + high tag depth write loads. + - Adapt to a change in the 2.5.X daemonize() API. + - Correct a "Missing case in ahd_handle_scsiint" panic. + + 1.3.0 (January 21st, 2003) + - Full regression testing for all U320 products completed. + - Added abort and target/lun reset error recovery handler and + interrupt coalescing. + + 1.2.0 (November 14th, 2002) + - Added support for Domain Validation + - Add support for the Hewlett-Packard version of the 39320D + and AIC-7902 adapters. + Support for previous adapters has not been fully tested and should + only be used at the customer's own risk. + + 1.1.1 (September 24th, 2002) + - Added support for the Linux 2.5.X kernel series + + 1.1.0 (September 17th, 2002) + - Added support for four additional SCSI products: + ASC-39320, ASC-29320, ASC-29320LP, AIC-7901. + + 1.0.0 (May 30th, 2002) + - Initial driver release. + + 2.1. Software/Hardware Features + - Support for the SPI-4 "Ultra320" standard: + - 320MB/s transfer rates + - Packetized SCSI Protocol at 160MB/s and 320MB/s + - Quick Arbitration Selection (QAS) + - Retained Training Information (Rev B. ASIC only) + - Interrupt Coalescing + - Initiator Mode (target mode not currently + supported) + - Support for the PCI-X standard up to 133MHz + - Support for the PCI v2.2 standard + - Domain Validation + + 2.2. Operating System Support: + - Redhat Linux 7.2, 7.3, 8.0, Advanced Server 2.1 + - SuSE Linux 7.3, 8.0, 8.1, Enterprise Server 7 + - only Intel and AMD x86 supported at this time + - >4GB memory configurations supported. + + Refer to the User's Guide for more details on this. + +3. Command Line Options + + WARNING: ALTERING OR ADDING THESE DRIVER PARAMETERS + INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE. + USE THEM WITH CAUTION. + + Edit the file "modprobe.conf" in the directory /etc and add/edit a + line containing 'options aic79xx aic79xx=[command[,command...]]' where + 'command' is one or more of the following: + ----------------------------------------------------------------- + Option: verbose + Definition: enable additional informative messages during + driver operation. + Possible Values: This option is a flag + Default Value: disabled + ----------------------------------------------------------------- + Option: debug:[value] + Definition: Enables various levels of debugging information + The bit definitions for the debugging mask can + be found in drivers/scsi/aic7xxx/aic79xx.h under + the "Debug" heading. + Possible Values: 0x0000 = no debugging, 0xffff = full debugging + Default Value: 0x0000 + ----------------------------------------------------------------- + Option: no_reset + Definition: Do not reset the bus during the initial probe + phase + Possible Values: This option is a flag + Default Value: disabled + ----------------------------------------------------------------- + Option: extended + Definition: Force extended translation on the controller + Possible Values: This option is a flag + Default Value: disabled + ----------------------------------------------------------------- + Option: periodic_otag + Definition: Send an ordered tag periodically to prevent + tag starvation. Needed for some older devices + Possible Values: This option is a flag + Default Value: disabled + ----------------------------------------------------------------- + Option: reverse_scan + Definition: Probe the scsi bus in reverse order, starting + with target 15 + Possible Values: This option is a flag + Default Value: disabled + ----------------------------------------------------------------- + Option: global_tag_depth + Definition: Global tag depth for all targets on all busses. + This option sets the default tag depth which + may be selectively overridden vi the tag_info + option. + Possible Values: 1 - 253 + Default Value: 32 + ----------------------------------------------------------------- + Option: tag_info:{{value[,value...]}[,{value[,value...]}...]} + Definition: Set the per-target tagged queue depth on a + per controller basis. Both controllers and targets + may be omitted indicating that they should retain + the default tag depth. + Examples: tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32} + On Controller 0 + specifies a tag depth of 16 for target 0 + specifies a tag depth of 64 for target 3 + specifies a tag depth of 8 for targets 4 and 5 + leaves target 6 at the default + specifies a tag depth of 32 for targets 1,2,7-15 + All other targets retain the default depth. + + tag_info:{{},{32,,32}} + On Controller 1 + specifies a tag depth of 32 for targets 0 and 2 + All other targets retain the default depth. + + Possible Values: 1 - 253 + Default Value: 32 + ----------------------------------------------------------------- + Option: rd_strm: {rd_strm_bitmask[,rd_strm_bitmask...]} + Definition: Enable read streaming on a per target basis. + The rd_strm_bitmask is a 16 bit hex value in which + each bit represents a target. Setting the target's + bit to '1' enables read streaming for that + target. Controllers may be omitted indicating that + they should retain the default read streaming setting. + Example: rd_strm:{0x0041} + On Controller 0 + enables read streaming for targets 0 and 6. + disables read streaming for targets 1-5,7-15. + All other targets retain the default read + streaming setting. + Example: rd_strm:{0x0023,,0xFFFF} + On Controller 0 + enables read streaming for targets 1,2, and 5. + disables read streaming for targets 3,4,6-15. + On Controller 2 + enables read streaming for all targets. + All other targets retain the default read + streaming setting. + + Possible Values: 0x0000 - 0xffff + Default Value: 0x0000 + ----------------------------------------------------------------- + Option: dv: {value[,value...]} + Definition: Set Domain Validation Policy on a per-controller basis. + Controllers may be omitted indicating that + they should retain the default read streaming setting. + Example: dv:{-1,0,,1,1,0} + On Controller 0 leave DV at its default setting. + On Controller 1 disable DV. + Skip configuration on Controller 2. + On Controllers 3 and 4 enable DV. + On Controller 5 disable DV. + + Possible Values: < 0 Use setting from serial EEPROM. + 0 Disable DV + > 0 Enable DV + Default Value: DV Serial EEPROM configuration setting. + ----------------------------------------------------------------- + Option: seltime:[value] + Definition: Specifies the selection timeout value + Possible Values: 0 = 256ms, 1 = 128ms, 2 = 64ms, 3 = 32ms + Default Value: 0 + ----------------------------------------------------------------- + + *** The following three options should only be changed at *** + *** the direction of a technical support representative. *** + + ----------------------------------------------------------------- + Option: precomp: {value[,value...]} + Definition: Set IO Cell precompensation value on a per-controller + basis. + Controllers may be omitted indicating that + they should retain the default precompensation setting. + Example: precomp:{0x1} + On Controller 0 set precompensation to 1. + Example: precomp:{1,,7} + On Controller 0 set precompensation to 1. + On Controller 2 set precompensation to 8. + + Possible Values: 0 - 7 + Default Value: Varies based on chip revision + ----------------------------------------------------------------- + Option: slewrate: {value[,value...]} + Definition: Set IO Cell slew rate on a per-controller basis. + Controllers may be omitted indicating that + they should retain the default slew rate setting. + Example: slewrate:{0x1} + On Controller 0 set slew rate to 1. + Example: slewrate :{1,,8} + On Controller 0 set slew rate to 1. + On Controller 2 set slew rate to 8. + + Possible Values: 0 - 15 + Default Value: Varies based on chip revision + ----------------------------------------------------------------- + Option: amplitude: {value[,value...]} + Definition: Set IO Cell signal amplitude on a per-controller basis. + Controllers may be omitted indicating that + they should retain the default read streaming setting. + Example: amplitude:{0x1} + On Controller 0 set amplitude to 1. + Example: amplitude :{1,,7} + On Controller 0 set amplitude to 1. + On Controller 2 set amplitude to 7. + + Possible Values: 1 - 7 + Default Value: Varies based on chip revision + ----------------------------------------------------------------- + + Example: 'options aic79xx aic79xx=verbose,rd_strm:{{0x0041}}' + enables verbose output in the driver and turns read streaming on + for targets 0 and 6 of Controller 0. + +4. Additional Notes + + 4.1. Known/Unresolved or FYI Issues + + * Under SuSE Linux Enterprise 7, the driver may fail to operate + correctly due to a problem with PCI interrupt routing in the + Linux kernel. Please contact SuSE for an updated Linux + kernel. + + 4.2. Third-Party Compatibility Issues + + * Adaptec only supports Ultra320 hard drives running + the latest firmware available. Please check with + your hard drive manufacturer to ensure you have the + latest version. + + 4.3. Operating System or Technology Limitations + + * PCI Hot Plug is untested and may cause the operating system + to stop responding. + * Luns that are not numbered contiguously starting with 0 might not + be automatically probed during system startup. This is a limitation + of the OS. Please contact your Linux vendor for instructions on + manually probing non-contiguous luns. + * Using the Driver Update Disk version of this package during OS + installation under RedHat might result in two versions of this + driver being installed into the system module directory. This + might cause problems with the /sbin/mkinitrd program and/or + other RPM packages that try to install system modules. The best + way to correct this once the system is running is to install + the latest RPM package version of this driver, available from + http://www.adaptec.com. + + +5. Adaptec Customer Support + + A Technical Support Identification (TSID) Number is required for + Adaptec technical support. + - The 12-digit TSID can be found on the white barcode-type label + included inside the box with your product. The TSID helps us + provide more efficient service by accurately identifying your + product and support status. + + Support Options + - Search the Adaptec Support Knowledgebase (ASK) at + http://ask.adaptec.com for articles, troubleshooting tips, and + frequently asked questions about your product. + - For support via Email, submit your question to Adaptec's + Technical Support Specialists at http://ask.adaptec.com/. + + North America + - Visit our Web site at http://www.adaptec.com/. + - For information about Adaptec's support options, call + 408-957-2550, 24 hours a day, 7 days a week. + - To speak with a Technical Support Specialist, + * For hardware products, call 408-934-7274, + Monday to Friday, 3:00 am to 5:00 pm, PDT. + * For RAID and Fibre Channel products, call 321-207-2000, + Monday to Friday, 3:00 am to 5:00 pm, PDT. + To expedite your service, have your computer with you. + - To order Adaptec products, including accessories and cables, + call 408-957-7274. To order cables online go to + http://www.adaptec.com/buy-cables/. + + Europe + - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index. + - To speak with a Technical Support Specialist, call, or email, + * German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET, + http://ask-de.adaptec.com/. + * French: +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET, + http://ask-fr.adaptec.com/. + * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT, + http://ask.adaptec.com/. + - You can order Adaptec cables online at + http://www.adaptec.com/buy-cables/. + + Japan + - Visit our web site at http://www.adaptec.co.jp/. + - To speak with a Technical Support Specialist, call + +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m., + 1:00 p.m. to 6:00 p.m. + +------------------------------------------------------------------- +/* + * Copyright (c) 2003 Adaptec Inc. 691 S. Milpitas Blvd., Milpitas CA 95035 USA. + * All rights reserved. + * + * You are permitted to redistribute, use and modify this README file in whole + * or in part in conjunction with redistribution of software governed by the + * General Public License, provided that the following conditions are met: + * 1. Redistributions of README file must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * 3. Modifications or new contributions must be attributed in a copyright + * notice identifying the author ("Contributor") and added below the + * original copyright notice. The copyright notice is for purposes of + * identifying contributors and should not be deemed as permission to alter + * the permissions given by Adaptec. + * + * THIS README FILE IS PROVIDED BY ADAPTEC AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY + * WARRANTIES OF NON-INFRINGEMENT OR THE IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * ADAPTEC OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS README + * FILE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ -- cgit v1.2.3