From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- Documentation/networking/tms380tr.txt | 147 ++++++++++++++++++++++++++++++++++ 1 file changed, 147 insertions(+) create mode 100644 Documentation/networking/tms380tr.txt (limited to 'Documentation/networking/tms380tr.txt') diff --git a/Documentation/networking/tms380tr.txt b/Documentation/networking/tms380tr.txt new file mode 100644 index 00000000..1f73e130 --- /dev/null +++ b/Documentation/networking/tms380tr.txt @@ -0,0 +1,147 @@ +Text file for the Linux SysKonnect Token Ring ISA/PCI Adapter Driver. + Text file by: Jay Schulist + +The Linux SysKonnect Token Ring driver works with the SysKonnect TR4/16(+) ISA, +SysKonnect TR4/16(+) PCI, SysKonnect TR4/16 PCI, and older revisions of the +SK NET TR4/16 ISA card. + +Latest information on this driver can be obtained on the Linux-SNA WWW site. +Please point your browser to: +http://www.linux-sna.org + +Many thanks to Christoph Goos for his excellent work on this driver and +SysKonnect for donating the adapters to Linux-SNA for the testing and +maintenance of this device driver. + +Important information to be noted: +1. Adapters can be slow to open (~20 secs) and close (~5 secs), please be + patient. +2. This driver works very well when autoprobing for adapters. Why even + think about those nasty io/int/dma settings of modprobe when the driver + will do it all for you! + +This driver is rather simple to use. Select Y to Token Ring adapter support +in the kernel configuration. A choice for SysKonnect Token Ring adapters will +appear. This drives supports all SysKonnect ISA and PCI adapters. Choose this +option. I personally recommend compiling the driver as a module (M), but if you +you would like to compile it statically answer Y instead. + +This driver supports multiple adapters without the need to load multiple copies +of the driver. You should be able to load up to 7 adapters without any kernel +modifications, if you are in need of more please contact the maintainer of this +driver. + +Load the driver either by lilo/loadlin or as a module. When a module using the +following command will suffice for most: + +# modprobe sktr + +This will produce output similar to the following: (Output is user specific) + +sktr.c: v1.01 08/29/97 by Christoph Goos +tr0: SK NET TR 4/16 PCI found at 0x6100, using IRQ 17. +tr1: SK NET TR 4/16 PCI found at 0x6200, using IRQ 16. +tr2: SK NET TR 4/16 ISA found at 0xa20, using IRQ 10 and DMA 5. + +Now just setup the device via ifconfig and set and routes you may have. After +this you are ready to start sending some tokens. + +Errata: +For anyone wondering where to pick up the SysKonnect adapters please browse +to http://www.syskonnect.com + +This driver is under the GNU General Public License. Its Firmware image is +included as an initialized C-array and is licensed by SysKonnect to the Linux +users of this driver. However no warranty about its fitness is expressed or +implied by SysKonnect. + +Below find attached the setting for the SK NET TR 4/16 ISA adapters +------------------------------------------------------------------- + + *************************** + *** C O N T E N T S *** + *************************** + + 1) Location of DIP-Switch W1 + 2) Default settings + 3) DIP-Switch W1 description + + + ============================================================== + CHAPTER 1 LOCATION OF DIP-SWITCH + ============================================================== + +UÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ +þUÄÄÄÄÄÄ¿ UÄÄÄÄÄ¿ UÄÄÄ¿ þ +þAÄÄÄÄÄÄU W1 AÄÄÄÄÄU UÄÄÄÄ¿ þ þ þ +þUÄÄÄÄÄÄ¿ þ þ þ þ UÄÄÅ¿ +þAÄÄÄÄÄÄU UÄÄÄÄÄÄÄÄÄÄÄ¿ AÄÄÄÄU þ þ þ þþ +þUÄÄÄÄÄÄ¿ þ þ UÄÄÄ¿ AÄÄÄU AÄÄÅU +þAÄÄÄÄÄÄU þ TMS380C26 þ þ þ þ +þUÄÄÄÄÄÄ¿ þ þ AÄÄÄU AÄ¿ +þAÄÄÄÄÄÄU þ þ þ þ +þ AÄÄÄÄÄÄÄÄÄÄÄU þ þ +þ þ þ +þ AÄU +þ þ +þ þ +þ þ +þ þ +AÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄU + AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU + + ============================================================== + CHAPTER 2 DEFAULT SETTINGS + ============================================================== + + W1 1 2 3 4 5 6 7 8 + +------------------------------+ + | ON X | + | OFF X X X X X X X | + +------------------------------+ + + W1.1 = ON Adapter drives address lines SA17..19 + W1.2 - 1.5 = OFF BootROM disabled + W1.6 - 1.8 = OFF I/O address 0A20h + + ============================================================== + CHAPTER 3 DIP SWITCH W1 DESCRIPTION + ============================================================== + + UÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄ¿ ON + þ 1 þ 2 þ 3 þ 4 þ 5 þ 6 þ 7 þ 8 þ + AÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄU OFF + |AD | BootROM Addr. | I/O | + +-+-+-------+-------+-----+-----+ + | | | + | | +------ 6 7 8 + | | ON ON ON 1900h + | | ON ON OFF 0900h + | | ON OFF ON 1980h + | | ON OFF OFF 0980h + | | OFF ON ON 1b20h + | | OFF ON OFF 0b20h + | | OFF OFF ON 1a20h + | | OFF OFF OFF 0a20h (+) + | | + | | + | +-------- 2 3 4 5 + | OFF x x x disabled (+) + | ON ON ON ON C0000 + | ON ON ON OFF C4000 + | ON ON OFF ON C8000 + | ON ON OFF OFF CC000 + | ON OFF ON ON D0000 + | ON OFF ON OFF D4000 + | ON OFF OFF ON D8000 + | ON OFF OFF OFF DC000 + | + | + +----- 1 + OFF adapter does NOT drive SA<17..19> + ON adapter drives SA<17..19> (+) + + + (+) means default setting + + ******************************** -- cgit v1.2.3