From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- Documentation/netlabel/cipso_ipv4.txt | 48 +++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/netlabel/cipso_ipv4.txt (limited to 'Documentation/netlabel/cipso_ipv4.txt') diff --git a/Documentation/netlabel/cipso_ipv4.txt b/Documentation/netlabel/cipso_ipv4.txt new file mode 100644 index 00000000..93dacb13 --- /dev/null +++ b/Documentation/netlabel/cipso_ipv4.txt @@ -0,0 +1,48 @@ +NetLabel CIPSO/IPv4 Protocol Engine +============================================================================== +Paul Moore, paul.moore@hp.com + +May 17, 2006 + + * Overview + +The NetLabel CIPSO/IPv4 protocol engine is based on the IETF Commercial IP +Security Option (CIPSO) draft from July 16, 1992. A copy of this draft can be +found in this directory, consult '00-INDEX' for the filename. While the IETF +draft never made it to an RFC standard it has become a de-facto standard for +labeled networking and is used in many trusted operating systems. + + * Outbound Packet Processing + +The CIPSO/IPv4 protocol engine applies the CIPSO IP option to packets by +adding the CIPSO label to the socket. This causes all packets leaving the +system through the socket to have the CIPSO IP option applied. The socket's +CIPSO label can be changed at any point in time, however, it is recommended +that it is set upon the socket's creation. The LSM can set the socket's CIPSO +label by using the NetLabel security module API; if the NetLabel "domain" is +configured to use CIPSO for packet labeling then a CIPSO IP option will be +generated and attached to the socket. + + * Inbound Packet Processing + +The CIPSO/IPv4 protocol engine validates every CIPSO IP option it finds at the +IP layer without any special handling required by the LSM. However, in order +to decode and translate the CIPSO label on the packet the LSM must use the +NetLabel security module API to extract the security attributes of the packet. +This is typically done at the socket layer using the 'socket_sock_rcv_skb()' +LSM hook. + + * Label Translation + +The CIPSO/IPv4 protocol engine contains a mechanism to translate CIPSO security +attributes such as sensitivity level and category to values which are +appropriate for the host. These mappings are defined as part of a CIPSO +Domain Of Interpretation (DOI) definition and are configured through the +NetLabel user space communication layer. Each DOI definition can have a +different security attribute mapping table. + + * Label Translation Cache + +The NetLabel system provides a framework for caching security attribute +mappings from the network labels to the corresponding LSM identifiers. The +CIPSO/IPv4 protocol engine supports this caching mechanism. -- cgit v1.2.3