From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- Documentation/ide/00-INDEX | 12 + Documentation/ide/ChangeLog.ide-cd.1994-2004 | 268 +++++++++++++++++++++++ Documentation/ide/ChangeLog.ide-floppy.1996-2002 | 63 ++++++ Documentation/ide/ChangeLog.ide-tape.1995-2002 | 257 ++++++++++++++++++++++ Documentation/ide/ide-tape.txt | 65 ++++++ Documentation/ide/ide.txt | 256 ++++++++++++++++++++++ Documentation/ide/warm-plug-howto.txt | 18 ++ 7 files changed, 939 insertions(+) create mode 100644 Documentation/ide/00-INDEX create mode 100644 Documentation/ide/ChangeLog.ide-cd.1994-2004 create mode 100644 Documentation/ide/ChangeLog.ide-floppy.1996-2002 create mode 100644 Documentation/ide/ChangeLog.ide-tape.1995-2002 create mode 100644 Documentation/ide/ide-tape.txt create mode 100644 Documentation/ide/ide.txt create mode 100644 Documentation/ide/warm-plug-howto.txt (limited to 'Documentation/ide') diff --git a/Documentation/ide/00-INDEX b/Documentation/ide/00-INDEX new file mode 100644 index 00000000..d6b77884 --- /dev/null +++ b/Documentation/ide/00-INDEX @@ -0,0 +1,12 @@ +00-INDEX + - this file +ChangeLog.ide-cd.1994-2004 + - ide-cd changelog +ChangeLog.ide-floppy.1996-2002 + - ide-floppy changelog +ChangeLog.ide-tape.1995-2002 + - ide-tape changelog +ide-tape.txt + - info on the IDE ATAPI streaming tape driver +ide.txt + - important info for users of ATA devices (IDE/EIDE disks and CD-ROMS). diff --git a/Documentation/ide/ChangeLog.ide-cd.1994-2004 b/Documentation/ide/ChangeLog.ide-cd.1994-2004 new file mode 100644 index 00000000..190d17bf --- /dev/null +++ b/Documentation/ide/ChangeLog.ide-cd.1994-2004 @@ -0,0 +1,268 @@ +/* + * 1.00 Oct 31, 1994 -- Initial version. + * 1.01 Nov 2, 1994 -- Fixed problem with starting request in + * cdrom_check_status. + * 1.03 Nov 25, 1994 -- leaving unmask_intr[] as a user-setting (as for disks) + * (from mlord) -- minor changes to cdrom_setup() + * -- renamed ide_dev_s to ide_drive_t, enable irq on command + * 2.00 Nov 27, 1994 -- Generalize packet command interface; + * add audio ioctls. + * 2.01 Dec 3, 1994 -- Rework packet command interface to handle devices + * which send an interrupt when ready for a command. + * 2.02 Dec 11, 1994 -- Cache the TOC in the driver. + * Don't use SCMD_PLAYAUDIO_TI; it's not included + * in the current version of ATAPI. + * Try to use LBA instead of track or MSF addressing + * when possible. + * Don't wait for READY_STAT. + * 2.03 Jan 10, 1995 -- Rewrite block read routines to handle block sizes + * other than 2k and to move multiple sectors in a + * single transaction. + * 2.04 Apr 21, 1995 -- Add work-around for Creative Labs CD220E drives. + * Thanks to Nick Saw for + * help in figuring this out. Ditto for Acer and + * Aztech drives, which seem to have the same problem. + * 2.04b May 30, 1995 -- Fix to match changes in ide.c version 3.16 -ml + * 2.05 Jun 8, 1995 -- Don't attempt to retry after an illegal request + * or data protect error. + * Use HWIF and DEV_HWIF macros as in ide.c. + * Always try to do a request_sense after + * a failed command. + * Include an option to give textual descriptions + * of ATAPI errors. + * Fix a bug in handling the sector cache which + * showed up if the drive returned data in 512 byte + * blocks (like Pioneer drives). Thanks to + * Richard Hirst for diagnosing this. + * Properly supply the page number field in the + * MODE_SELECT command. + * PLAYAUDIO12 is broken on the Aztech; work around it. + * 2.05x Aug 11, 1995 -- lots of data structure renaming/restructuring in ide.c + * (my apologies to Scott, but now ide-cd.c is independent) + * 3.00 Aug 22, 1995 -- Implement CDROMMULTISESSION ioctl. + * Implement CDROMREADAUDIO ioctl (UNTESTED). + * Use input_ide_data() and output_ide_data(). + * Add door locking. + * Fix usage count leak in cdrom_open, which happened + * when a read-write mount was attempted. + * Try to load the disk on open. + * Implement CDROMEJECT_SW ioctl (off by default). + * Read total cdrom capacity during open. + * Rearrange logic in cdrom_decode_status. Issue + * request sense commands for failed packet commands + * from here instead of from cdrom_queue_packet_command. + * Fix a race condition in retrieving error information. + * Suppress printing normal unit attention errors and + * some drive not ready errors. + * Implement CDROMVOLREAD ioctl. + * Implement CDROMREADMODE1/2 ioctls. + * Fix race condition in setting up interrupt handlers + * when the `serialize' option is used. + * 3.01 Sep 2, 1995 -- Fix ordering of reenabling interrupts in + * cdrom_queue_request. + * Another try at using ide_[input,output]_data. + * 3.02 Sep 16, 1995 -- Stick total disk capacity in partition table as well. + * Make VERBOSE_IDE_CD_ERRORS dump failed command again. + * Dump out more information for ILLEGAL REQUEST errs. + * Fix handling of errors occurring before the + * packet command is transferred. + * Fix transfers with odd bytelengths. + * 3.03 Oct 27, 1995 -- Some Creative drives have an id of just `CD'. + * `DCI-2S10' drives are broken too. + * 3.04 Nov 20, 1995 -- So are Vertos drives. + * 3.05 Dec 1, 1995 -- Changes to go with overhaul of ide.c and ide-tape.c + * 3.06 Dec 16, 1995 -- Add support needed for partitions. + * More workarounds for Vertos bugs (based on patches + * from Holger Dietze ). + * Try to eliminate byteorder assumptions. + * Use atapi_cdrom_subchnl struct definition. + * Add STANDARD_ATAPI compilation option. + * 3.07 Jan 29, 1996 -- More twiddling for broken drives: Sony 55D, + * Vertos 300. + * Add NO_DOOR_LOCKING configuration option. + * Handle drive_cmd requests w/NULL args (for hdparm -t). + * Work around sporadic Sony55e audio play problem. + * 3.07a Feb 11, 1996 -- check drive->id for NULL before dereferencing, to fix + * problem with "hde=cdrom" with no drive present. -ml + * 3.08 Mar 6, 1996 -- More Vertos workarounds. + * 3.09 Apr 5, 1996 -- Add CDROMCLOSETRAY ioctl. + * Switch to using MSF addressing for audio commands. + * Reformat to match kernel tabbing style. + * Add CDROM_GET_UPC ioctl. + * 3.10 Apr 10, 1996 -- Fix compilation error with STANDARD_ATAPI. + * 3.11 Apr 29, 1996 -- Patch from Heiko Eißfeldt + * to remove redundant verify_area calls. + * 3.12 May 7, 1996 -- Rudimentary changer support. Based on patches + * from Gerhard Zuber . + * Let open succeed even if there's no loaded disc. + * 3.13 May 19, 1996 -- Fixes for changer code. + * 3.14 May 29, 1996 -- Add work-around for Vertos 600. + * (From Hennus Bergman .) + * 3.15 July 2, 1996 -- Added support for Sanyo 3 CD changers + * from Ben Galliart with + * special help from Jeff Lightfoot + * + * 3.15a July 9, 1996 -- Improved Sanyo 3 CD changer identification + * 3.16 Jul 28, 1996 -- Fix from Gadi to reduce kernel stack usage for ioctl. + * 3.17 Sep 17, 1996 -- Tweak audio reads for some drives. + * Start changing CDROMLOADFROMSLOT to CDROM_SELECT_DISC. + * 3.18 Oct 31, 1996 -- Added module and DMA support. + * + * 4.00 Nov 5, 1996 -- New ide-cd maintainer, + * Erik B. Andersen + * -- Newer Creative drives don't always set the error + * register correctly. Make sure we see media changes + * regardless. + * -- Integrate with generic cdrom driver. + * -- CDROMGETSPINDOWN and CDROMSETSPINDOWN ioctls, based on + * a patch from Ciro Cattuto <>. + * -- Call set_device_ro. + * -- Implement CDROMMECHANISMSTATUS and CDROMSLOTTABLE + * ioctls, based on patch by Erik Andersen + * -- Add some probes of drive capability during setup. + * + * 4.01 Nov 11, 1996 -- Split into ide-cd.c and ide-cd.h + * -- Removed CDROMMECHANISMSTATUS and CDROMSLOTTABLE + * ioctls in favor of a generalized approach + * using the generic cdrom driver. + * -- Fully integrated with the 2.1.X kernel. + * -- Other stuff that I forgot (lots of changes) + * + * 4.02 Dec 01, 1996 -- Applied patch from Gadi Oxman + * to fix the drive door locking problems. + * + * 4.03 Dec 04, 1996 -- Added DSC overlap support. + * 4.04 Dec 29, 1996 -- Added CDROMREADRAW ioclt based on patch + * by Ales Makarov (xmakarov@sun.felk.cvut.cz) + * + * 4.05 Nov 20, 1997 -- Modified to print more drive info on init + * Minor other changes + * Fix errors on CDROMSTOP (If you have a "Dolphin", + * you must define IHAVEADOLPHIN) + * Added identifier so new Sanyo CD-changer works + * Better detection if door locking isn't supported + * + * 4.06 Dec 17, 1997 -- fixed endless "tray open" messages -ml + * 4.07 Dec 17, 1997 -- fallback to set pc->stat on "tray open" + * 4.08 Dec 18, 1997 -- spew less noise when tray is empty + * -- fix speed display for ACER 24X, 18X + * 4.09 Jan 04, 1998 -- fix handling of the last block so we return + * an end of file instead of an I/O error (Gadi) + * 4.10 Jan 24, 1998 -- fixed a bug so now changers can change to a new + * slot when there is no disc in the current slot. + * -- Fixed a memory leak where info->changer_info was + * malloc'ed but never free'd when closing the device. + * -- Cleaned up the global namespace a bit by making more + * functions static that should already have been. + * 4.11 Mar 12, 1998 -- Added support for the CDROM_SELECT_SPEED ioctl + * based on a patch for 2.0.33 by Jelle Foks + * , a patch for 2.0.33 + * by Toni Giorgino , the SCSI + * version, and my own efforts. -erik + * -- Fixed a stupid bug which egcs was kind enough to + * inform me of where "Illegal mode for this track" + * was never returned due to a comparison on data + * types of limited range. + * 4.12 Mar 29, 1998 -- Fixed bug in CDROM_SELECT_SPEED so write speed is + * now set ionly for CD-R and CD-RW drives. I had + * removed this support because it produced errors. + * It produced errors _only_ for non-writers. duh. + * 4.13 May 05, 1998 -- Suppress useless "in progress of becoming ready" + * messages, since this is not an error. + * -- Change error messages to be const + * -- Remove a "\t" which looks ugly in the syslogs + * 4.14 July 17, 1998 -- Change to pointing to .ps version of ATAPI spec + * since the .pdf version doesn't seem to work... + * -- Updated the TODO list to something more current. + * + * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect mechine endianess, + * patch thanks to "Eddie C. Dost" + * + * 4.50 Oct 19, 1998 -- New maintainers! + * Jens Axboe + * Chris Zwilling + * + * 4.51 Dec 23, 1998 -- Jens Axboe + * - ide_cdrom_reset enabled since the ide subsystem + * handles resets fine now. + * - Transfer size fix for Samsung CD-ROMs, thanks to + * "Ville Hallik" . + * - other minor stuff. + * + * 4.52 Jan 19, 1999 -- Jens Axboe + * - Detect DVD-ROM/RAM drives + * + * 4.53 Feb 22, 1999 - Include other model Samsung and one Goldstar + * drive in transfer size limit. + * - Fix the I/O error when doing eject without a medium + * loaded on some drives. + * - CDROMREADMODE2 is now implemented through + * CDROMREADRAW, since many drives don't support + * MODE2 (even though ATAPI 2.6 says they must). + * - Added ignore parameter to ide-cd (as a module), eg + * insmod ide-cd ignore='hda hdb' + * Useful when using ide-cd in conjunction with + * ide-scsi. TODO: non-modular way of doing the + * same. + * + * 4.54 Aug 5, 1999 - Support for MMC2 class commands through the generic + * packet interface to cdrom.c. + * - Unified audio ioctl support, most of it. + * - cleaned up various deprecated verify_area(). + * - Added ide_cdrom_packet() as the interface for + * the Uniform generic_packet(). + * - bunch of other stuff, will fill in logs later. + * - report 1 slot for non-changers, like the other + * cd-rom drivers. don't report select disc for + * non-changers as well. + * - mask out audio playing, if the device can't do it. + * + * 4.55 Sep 1, 1999 - Eliminated the rest of the audio ioctls, except + * for CDROMREADTOC[ENTRY|HEADER]. Some of the drivers + * use this independently of the actual audio handling. + * They will disappear later when I get the time to + * do it cleanly. + * - Minimize the TOC reading - only do it when we + * know a media change has occurred. + * - Moved all the CDROMREADx ioctls to the Uniform layer. + * - Heiko Eißfeldt supplied + * some fixes for CDI. + * - CD-ROM leaving door locked fix from Andries + * Brouwer + * - Erik Andersen unified + * commands across the various drivers and how + * sense errors are handled. + * + * 4.56 Sep 12, 1999 - Removed changer support - it is now in the + * Uniform layer. + * - Added partition based multisession handling. + * - Mode sense and mode select moved to the + * Uniform layer. + * - Fixed a problem with WPI CDS-32X drive - it + * failed the capabilities + * + * 4.57 Apr 7, 2000 - Fixed sense reporting. + * - Fixed possible oops in ide_cdrom_get_last_session() + * - Fix locking mania and make ide_cdrom_reset relock + * - Stop spewing errors to log when magicdev polls with + * TEST_UNIT_READY on some drives. + * - Various fixes from Tobias Ringstrom: + * tray if it was locked prior to the reset. + * - cdrom_read_capacity returns one frame too little. + * - Fix real capacity reporting. + * + * 4.58 May 1, 2000 - Clean up ACER50 stuff. + * - Fix small problem with ide_cdrom_capacity + * + * 4.59 Aug 11, 2000 - Fix changer problem in cdrom_read_toc, we weren't + * correctly sensing a disc change. + * - Rearranged some code + * - Use extended sense on drives that support it for + * correctly reporting tray status -- from + * Michael D Johnson + * 4.60 Dec 17, 2003 - Add mt rainier support + * - Bump timeout for packet commands, matches sr + * - Odd stuff + * 4.61 Jan 22, 2004 - support hardware sector sizes other than 2kB, + * Pascal Schmidt + */ diff --git a/Documentation/ide/ChangeLog.ide-floppy.1996-2002 b/Documentation/ide/ChangeLog.ide-floppy.1996-2002 new file mode 100644 index 00000000..46c19ef3 --- /dev/null +++ b/Documentation/ide/ChangeLog.ide-floppy.1996-2002 @@ -0,0 +1,63 @@ +/* + * Many thanks to Lode Leroy , who tested so many + * ALPHA patches to this driver on an EASYSTOR LS-120 ATAPI floppy drive. + * + * Ver 0.1 Oct 17 96 Initial test version, mostly based on ide-tape.c. + * Ver 0.2 Oct 31 96 Minor changes. + * Ver 0.3 Dec 2 96 Fixed error recovery bug. + * Ver 0.4 Jan 26 97 Add support for the HDIO_GETGEO ioctl. + * Ver 0.5 Feb 21 97 Add partitions support. + * Use the minimum of the LBA and CHS capacities. + * Avoid hwgroup->rq == NULL on the last irq. + * Fix potential null dereferencing with DEBUG_LOG. + * Ver 0.8 Dec 7 97 Increase irq timeout from 10 to 50 seconds. + * Add media write-protect detection. + * Issue START command only if TEST UNIT READY fails. + * Add work-around for IOMEGA ZIP revision 21.D. + * Remove idefloppy_get_capabilities(). + * Ver 0.9 Jul 4 99 Fix a bug which might have caused the number of + * bytes requested on each interrupt to be zero. + * Thanks to for pointing this out. + * Ver 0.9.sv Jan 6 01 Sam Varshavchik + * Implement low level formatting. Reimplemented + * IDEFLOPPY_CAPABILITIES_PAGE, since we need the srfp + * bit. My LS-120 drive barfs on + * IDEFLOPPY_CAPABILITIES_PAGE, but maybe it's just me. + * Compromise by not reporting a failure to get this + * mode page. Implemented four IOCTLs in order to + * implement formatting. IOCTls begin with 0x4600, + * 0x46 is 'F' as in Format. + * Jan 9 01 Userland option to select format verify. + * Added PC_SUPPRESS_ERROR flag - some idefloppy drives + * do not implement IDEFLOPPY_CAPABILITIES_PAGE, and + * return a sense error. Suppress error reporting in + * this particular case in order to avoid spurious + * errors in syslog. The culprit is + * idefloppy_get_capability_page(), so move it to + * idefloppy_begin_format() so that it's not used + * unless absolutely necessary. + * If drive does not support format progress indication + * monitor the dsc bit in the status register. + * Also, O_NDELAY on open will allow the device to be + * opened without a disk available. This can be used to + * open an unformatted disk, or get the device capacity. + * Ver 0.91 Dec 11 99 Added IOMEGA Clik! drive support by + * + * Ver 0.92 Oct 22 00 Paul Bristow became official maintainer for this + * driver. Included Powerbook internal zip kludge. + * Ver 0.93 Oct 24 00 Fixed bugs for Clik! drive + * no disk on insert and disk change now works + * Ver 0.94 Oct 27 00 Tidied up to remove strstr(Clik) everywhere + * Ver 0.95 Nov 7 00 Brought across to kernel 2.4 + * Ver 0.96 Jan 7 01 Actually in line with release version of 2.4.0 + * including set_bit patch from Rusty Russell + * Ver 0.97 Jul 22 01 Merge 0.91-0.96 onto 0.9.sv for ac series + * Ver 0.97.sv Aug 3 01 Backported from 2.4.7-ac3 + * Ver 0.98 Oct 26 01 Split idefloppy_transfer_pc into two pieces to + * fix a lost interrupt problem. It appears the busy + * bit was being deasserted by my IOMEGA ATAPI ZIP 100 + * drive before the drive was actually ready. + * Ver 0.98a Oct 29 01 Expose delay value so we can play. + * Ver 0.99 Feb 24 02 Remove duplicate code, modify clik! detection code + * to support new PocketZip drives + */ diff --git a/Documentation/ide/ChangeLog.ide-tape.1995-2002 b/Documentation/ide/ChangeLog.ide-tape.1995-2002 new file mode 100644 index 00000000..877fac87 --- /dev/null +++ b/Documentation/ide/ChangeLog.ide-tape.1995-2002 @@ -0,0 +1,257 @@ +/* + * Ver 0.1 Nov 1 95 Pre-working code :-) + * Ver 0.2 Nov 23 95 A short backup (few megabytes) and restore procedure + * was successful ! (Using tar cvf ... on the block + * device interface). + * A longer backup resulted in major swapping, bad + * overall Linux performance and eventually failed as + * we received non serial read-ahead requests from the + * buffer cache. + * Ver 0.3 Nov 28 95 Long backups are now possible, thanks to the + * character device interface. Linux's responsiveness + * and performance doesn't seem to be much affected + * from the background backup procedure. + * Some general mtio.h magnetic tape operations are + * now supported by our character device. As a result, + * popular tape utilities are starting to work with + * ide tapes :-) + * The following configurations were tested: + * 1. An IDE ATAPI TAPE shares the same interface + * and irq with an IDE ATAPI CDROM. + * 2. An IDE ATAPI TAPE shares the same interface + * and irq with a normal IDE disk. + * Both configurations seemed to work just fine ! + * However, to be on the safe side, it is meanwhile + * recommended to give the IDE TAPE its own interface + * and irq. + * The one thing which needs to be done here is to + * add a "request postpone" feature to ide.c, + * so that we won't have to wait for the tape to finish + * performing a long media access (DSC) request (such + * as a rewind) before we can access the other device + * on the same interface. This effect doesn't disturb + * normal operation most of the time because read/write + * requests are relatively fast, and once we are + * performing one tape r/w request, a lot of requests + * from the other device can be queued and ide.c will + * service all of them after this single tape request. + * Ver 1.0 Dec 11 95 Integrated into Linux 1.3.46 development tree. + * On each read / write request, we now ask the drive + * if we can transfer a constant number of bytes + * (a parameter of the drive) only to its buffers, + * without causing actual media access. If we can't, + * we just wait until we can by polling the DSC bit. + * This ensures that while we are not transferring + * more bytes than the constant referred to above, the + * interrupt latency will not become too high and + * we won't cause an interrupt timeout, as happened + * occasionally in the previous version. + * While polling for DSC, the current request is + * postponed and ide.c is free to handle requests from + * the other device. This is handled transparently to + * ide.c. The hwgroup locking method which was used + * in the previous version was removed. + * Use of new general features which are provided by + * ide.c for use with atapi devices. + * (Programming done by Mark Lord) + * Few potential bug fixes (Again, suggested by Mark) + * Single character device data transfers are now + * not limited in size, as they were before. + * We are asking the tape about its recommended + * transfer unit and send a larger data transfer + * as several transfers of the above size. + * For best results, use an integral number of this + * basic unit (which is shown during driver + * initialization). I will soon add an ioctl to get + * this important parameter. + * Our data transfer buffer is allocated on startup, + * rather than before each data transfer. This should + * ensure that we will indeed have a data buffer. + * Ver 1.1 Dec 14 95 Fixed random problems which occurred when the tape + * shared an interface with another device. + * (poll_for_dsc was a complete mess). + * Removed some old (non-active) code which had + * to do with supporting buffer cache originated + * requests. + * The block device interface can now be opened, so + * that general ide driver features like the unmask + * interrupts flag can be selected with an ioctl. + * This is the only use of the block device interface. + * New fast pipelined operation mode (currently only on + * writes). When using the pipelined mode, the + * throughput can potentially reach the maximum + * tape supported throughput, regardless of the + * user backup program. On my tape drive, it sometimes + * boosted performance by a factor of 2. Pipelined + * mode is enabled by default, but since it has a few + * downfalls as well, you may want to disable it. + * A short explanation of the pipelined operation mode + * is available below. + * Ver 1.2 Jan 1 96 Eliminated pipelined mode race condition. + * Added pipeline read mode. As a result, restores + * are now as fast as backups. + * Optimized shared interface behavior. The new behavior + * typically results in better IDE bus efficiency and + * higher tape throughput. + * Pre-calculation of the expected read/write request + * service time, based on the tape's parameters. In + * the pipelined operation mode, this allows us to + * adjust our polling frequency to a much lower value, + * and thus to dramatically reduce our load on Linux, + * without any decrease in performance. + * Implemented additional mtio.h operations. + * The recommended user block size is returned by + * the MTIOCGET ioctl. + * Additional minor changes. + * Ver 1.3 Feb 9 96 Fixed pipelined read mode bug which prevented the + * use of some block sizes during a restore procedure. + * The character device interface will now present a + * continuous view of the media - any mix of block sizes + * during a backup/restore procedure is supported. The + * driver will buffer the requests internally and + * convert them to the tape's recommended transfer + * unit, making performance almost independent of the + * chosen user block size. + * Some improvements in error recovery. + * By cooperating with ide-dma.c, bus mastering DMA can + * now sometimes be used with IDE tape drives as well. + * Bus mastering DMA has the potential to dramatically + * reduce the CPU's overhead when accessing the device, + * and can be enabled by using hdparm -d1 on the tape's + * block device interface. For more info, read the + * comments in ide-dma.c. + * Ver 1.4 Mar 13 96 Fixed serialize support. + * Ver 1.5 Apr 12 96 Fixed shared interface operation, broken in 1.3.85. + * Fixed pipelined read mode inefficiency. + * Fixed nasty null dereferencing bug. + * Ver 1.6 Aug 16 96 Fixed FPU usage in the driver. + * Fixed end of media bug. + * Ver 1.7 Sep 10 96 Minor changes for the CONNER CTT8000-A model. + * Ver 1.8 Sep 26 96 Attempt to find a better balance between good + * interactive response and high system throughput. + * Ver 1.9 Nov 5 96 Automatically cross encountered filemarks rather + * than requiring an explicit FSF command. + * Abort pending requests at end of media. + * MTTELL was sometimes returning incorrect results. + * Return the real block size in the MTIOCGET ioctl. + * Some error recovery bug fixes. + * Ver 1.10 Nov 5 96 Major reorganization. + * Reduced CPU overhead a bit by eliminating internal + * bounce buffers. + * Added module support. + * Added multiple tape drives support. + * Added partition support. + * Rewrote DSC handling. + * Some portability fixes. + * Removed ide-tape.h. + * Additional minor changes. + * Ver 1.11 Dec 2 96 Bug fix in previous DSC timeout handling. + * Use ide_stall_queue() for DSC overlap. + * Use the maximum speed rather than the current speed + * to compute the request service time. + * Ver 1.12 Dec 7 97 Fix random memory overwriting and/or last block data + * corruption, which could occur if the total number + * of bytes written to the tape was not an integral + * number of tape blocks. + * Add support for INTERRUPT DRQ devices. + * Ver 1.13 Jan 2 98 Add "speed == 0" work-around for HP COLORADO 5GB + * Ver 1.14 Dec 30 98 Partial fixes for the Sony/AIWA tape drives. + * Replace cli()/sti() with hwgroup spinlocks. + * Ver 1.15 Mar 25 99 Fix SMP race condition by replacing hwgroup + * spinlock with private per-tape spinlock. + * Ver 1.16 Sep 1 99 Add OnStream tape support. + * Abort read pipeline on EOD. + * Wait for the tape to become ready in case it returns + * "in the process of becoming ready" on open(). + * Fix zero padding of the last written block in + * case the tape block size is larger than PAGE_SIZE. + * Decrease the default disconnection time to tn. + * Ver 1.16e Oct 3 99 Minor fixes. + * Ver 1.16e1 Oct 13 99 Patches by Arnold Niessen, + * niessen@iae.nl / arnold.niessen@philips.com + * GO-1) Undefined code in idetape_read_position + * according to Gadi's email + * AJN-1) Minor fix asc == 11 should be asc == 0x11 + * in idetape_issue_packet_command (did effect + * debugging output only) + * AJN-2) Added more debugging output, and + * added ide-tape: where missing. I would also + * like to add tape->name where possible + * AJN-3) Added different debug_level's + * via /proc/ide/hdc/settings + * "debug_level" determines amount of debugging output; + * can be changed using /proc/ide/hdx/settings + * 0 : almost no debugging output + * 1 : 0+output errors only + * 2 : 1+output all sensekey/asc + * 3 : 2+follow all chrdev related procedures + * 4 : 3+follow all procedures + * 5 : 4+include pc_stack rq_stack info + * 6 : 5+USE_COUNT updates + * AJN-4) Fixed timeout for retension in idetape_queue_pc_tail + * from 5 to 10 minutes + * AJN-5) Changed maximum number of blocks to skip when + * reading tapes with multiple consecutive write + * errors from 100 to 1000 in idetape_get_logical_blk + * Proposed changes to code: + * 1) output "logical_blk_num" via /proc + * 2) output "current_operation" via /proc + * 3) Either solve or document the fact that `mt rewind' is + * required after reading from /dev/nhtx to be + * able to rmmod the idetape module; + * Also, sometimes an application finishes but the + * device remains `busy' for some time. Same cause ? + * Proposed changes to release-notes: + * 4) write a simple `quickstart' section in the + * release notes; I volunteer if you don't want to + * 5) include a pointer to video4linux in the doc + * to stimulate video applications + * 6) release notes lines 331 and 362: explain what happens + * if the application data rate is higher than 1100 KB/s; + * similar approach to lower-than-500 kB/s ? + * 7) 6.6 Comparison; wouldn't it be better to allow different + * strategies for read and write ? + * Wouldn't it be better to control the tape buffer + * contents instead of the bandwidth ? + * 8) line 536: replace will by would (if I understand + * this section correctly, a hypothetical and unwanted situation + * is being described) + * Ver 1.16f Dec 15 99 Change place of the secondary OnStream header frames. + * Ver 1.17 Nov 2000 / Jan 2001 Marcel Mol, marcel@mesa.nl + * - Add idetape_onstream_mode_sense_tape_parameter_page + * function to get tape capacity in frames: tape->capacity. + * - Add support for DI-50 drives( or any DI- drive). + * - 'workaround' for read error/blank block around block 3000. + * - Implement Early warning for end of media for Onstream. + * - Cosmetic code changes for readability. + * - Idetape_position_tape should not use SKIP bit during + * Onstream read recovery. + * - Add capacity, logical_blk_num and first/last_frame_position + * to /proc/ide/hd?/settings. + * - Module use count was gone in the Linux 2.4 driver. + * Ver 1.17a Apr 2001 Willem Riede osst@riede.org + * - Get drive's actual block size from mode sense block descriptor + * - Limit size of pipeline + * Ver 1.17b Oct 2002 Alan Stern + * Changed IDETAPE_MIN_PIPELINE_STAGES to 1 and actually used + * it in the code! + * Actually removed aborted stages in idetape_abort_pipeline + * instead of just changing the command code. + * Made the transfer byte count for Request Sense equal to the + * actual length of the data transfer. + * Changed handling of partial data transfers: they do not + * cause DMA errors. + * Moved initiation of DMA transfers to the correct place. + * Removed reference to unallocated memory. + * Made __idetape_discard_read_pipeline return the number of + * sectors skipped, not the number of stages. + * Replaced errant kfree() calls with __idetape_kfree_stage(). + * Fixed off-by-one error in testing the pipeline length. + * Fixed handling of filemarks in the read pipeline. + * Small code optimization for MTBSF and MTBSFM ioctls. + * Don't try to unlock the door during device close if is + * already unlocked! + * Cosmetic fixes to miscellaneous debugging output messages. + * Set the minimum /proc/ide/hd?/settings values for "pipeline", + * "pipeline_min", and "pipeline_max" to 1. + */ diff --git a/Documentation/ide/ide-tape.txt b/Documentation/ide/ide-tape.txt new file mode 100644 index 00000000..3f348a0b --- /dev/null +++ b/Documentation/ide/ide-tape.txt @@ -0,0 +1,65 @@ +IDE ATAPI streaming tape driver. + +This driver is a part of the Linux ide driver. + +The driver, in co-operation with ide.c, basically traverses the +request-list for the block device interface. The character device +interface, on the other hand, creates new requests, adds them +to the request-list of the block device, and waits for their completion. + +The block device major and minor numbers are determined from the +tape's relative position in the ide interfaces, as explained in ide.c. + +The character device interface consists of the following devices: + +ht0 major 37, minor 0 first IDE tape, rewind on close. +ht1 major 37, minor 1 second IDE tape, rewind on close. +... +nht0 major 37, minor 128 first IDE tape, no rewind on close. +nht1 major 37, minor 129 second IDE tape, no rewind on close. +... + +The general magnetic tape commands compatible interface, as defined by +include/linux/mtio.h, is accessible through the character device. + +General ide driver configuration options, such as the interrupt-unmask +flag, can be configured by issuing an ioctl to the block device interface, +as any other ide device. + +Our own ide-tape ioctl's can be issued to either the block device or +the character device interface. + +Maximal throughput with minimal bus load will usually be achieved in the +following scenario: + + 1. ide-tape is operating in the pipelined operation mode. + 2. No buffering is performed by the user backup program. + +Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive. + +Here are some words from the first releases of hd.c, which are quoted +in ide.c and apply here as well: + +| Special care is recommended. Have Fun! + +Possible improvements: + +1. Support for the ATAPI overlap protocol. + +In order to maximize bus throughput, we currently use the DSC +overlap method which enables ide.c to service requests from the +other device while the tape is busy executing a command. The +DSC overlap method involves polling the tape's status register +for the DSC bit, and servicing the other device while the tape +isn't ready. + +In the current QIC development standard (December 1995), +it is recommended that new tape drives will *in addition* +implement the ATAPI overlap protocol, which is used for the +same purpose - efficient use of the IDE bus, but is interrupt +driven and thus has much less CPU overhead. + +ATAPI overlap is likely to be supported in most new ATAPI +devices, including new ATAPI cdroms, and thus provides us +a method by which we can achieve higher throughput when +sharing a (fast) ATA-2 disk with any (slow) new ATAPI device. diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt new file mode 100644 index 00000000..e77bebfa --- /dev/null +++ b/Documentation/ide/ide.txt @@ -0,0 +1,256 @@ + + Information regarding the Enhanced IDE drive in Linux 2.6 + +============================================================================== + + + The hdparm utility can be used to control various IDE features on a + running system. It is packaged separately. Please Look for it on popular + linux FTP sites. + + + +*** IMPORTANT NOTICES: BUGGY IDE CHIPSETS CAN CORRUPT DATA!! +*** ================= +*** PCI versions of the CMD640 and RZ1000 interfaces are now detected +*** automatically at startup when PCI BIOS support is configured. +*** +*** Linux disables the "prefetch" ("readahead") mode of the RZ1000 +*** to prevent data corruption possible due to hardware design flaws. +*** +*** For the CMD640, linux disables "IRQ unmasking" (hdparm -u1) on any +*** drive for which the "prefetch" mode of the CMD640 is turned on. +*** If "prefetch" is disabled (hdparm -p8), then "IRQ unmasking" can be +*** used again. +*** +*** For the CMD640, linux disables "32bit I/O" (hdparm -c1) on any drive +*** for which the "prefetch" mode of the CMD640 is turned off. +*** If "prefetch" is enabled (hdparm -p9), then "32bit I/O" can be +*** used again. +*** +*** The CMD640 is also used on some Vesa Local Bus (VLB) cards, and is *NOT* +*** automatically detected by Linux. For safe, reliable operation with such +*** interfaces, one *MUST* use the "cmd640.probe_vlb" kernel option. +*** +*** Use of the "serialize" option is no longer necessary. + +================================================================================ +Common pitfalls: + +- 40-conductor IDE cables are capable of transferring data in DMA modes up to + udma2, but no faster. + +- If possible devices should be attached to separate channels if they are + available. Typically the disk on the first and CD-ROM on the second. + +- If you mix devices on the same cable, please consider using similar devices + in respect of the data transfer mode they support. + +- Even better try to stick to the same vendor and device type on the same + cable. + +================================================================================ + +This is the multiple IDE interface driver, as evolved from hd.c. + +It supports up to 9 IDE interfaces per default, on one or more IRQs (usually +14 & 15). There can be up to two drives per interface, as per the ATA-6 spec. + +Primary: ide0, port 0x1f0; major=3; hda is minor=0; hdb is minor=64 +Secondary: ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64 +Tertiary: ide2, port 0x1e8; major=33; hde is minor=0; hdf is minor=64 +Quaternary: ide3, port 0x168; major=34; hdg is minor=0; hdh is minor=64 +fifth.. ide4, usually PCI, probed +sixth.. ide5, usually PCI, probed + +To access devices on interfaces > ide0, device entries please make sure that +device files for them are present in /dev. If not, please create such +entries, by using /dev/MAKEDEV. + +This driver automatically probes for most IDE interfaces (including all PCI +ones), for the drives/geometries attached to those interfaces, and for the IRQ +lines being used by the interfaces (normally 14, 15 for ide0/ide1). + +Any number of interfaces may share a single IRQ if necessary, at a slight +performance penalty, whether on separate cards or a single VLB card. +The IDE driver automatically detects and handles this. However, this may +or may not be harmful to your hardware.. two or more cards driving the same IRQ +can potentially burn each other's bus driver, though in practice this +seldom occurs. Be careful, and if in doubt, don't do it! + +Drives are normally found by auto-probing and/or examining the CMOS/BIOS data. +For really weird situations, the apparent (fdisk) geometry can also be specified +on the kernel "command line" using LILO. The format of such lines is: + + ide_core.chs=[interface_number.device_number]:cyls,heads,sects +or ide_core.cdrom=[interface_number.device_number] + +For example: + + ide_core.chs=1.0:1050,32,64 ide_core.cdrom=1.1 + +The results of successful auto-probing may override the physical geometry/irq +specified, though the "original" geometry may be retained as the "logical" +geometry for partitioning purposes (fdisk). + +If the auto-probing during boot time confuses a drive (ie. the drive works +with hd.c but not with ide.c), then an command line option may be specified +for each drive for which you'd like the drive to skip the hardware +probe/identification sequence. For example: + + ide_core.noprobe=0.1 +or + ide_core.chs=1.0:768,16,32 + ide_core.noprobe=1.0 + +Note that when only one IDE device is attached to an interface, it should be +jumpered as "single" or "master", *not* "slave". Many folks have had +"trouble" with cdroms because of this requirement, so the driver now probes +for both units, though success is more likely when the drive is jumpered +correctly. + +Courtesy of Scott Snyder and others, the driver supports ATAPI cdrom drives +such as the NEC-260 and the new MITSUMI triple/quad speed drives. +Such drives will be identified at boot time, just like a hard disk. + +If for some reason your cdrom drive is *not* found at boot time, you can force +the probe to look harder by supplying a kernel command line parameter +via LILO, such as: + + ide_core.cdrom=1.0 /* "master" on second interface (hdc) */ +or + ide_core.cdrom=1.1 /* "slave" on second interface (hdd) */ + +For example, a GW2000 system might have a hard drive on the primary +interface (/dev/hda) and an IDE cdrom drive on the secondary interface +(/dev/hdc). To mount a CD in the cdrom drive, one would use something like: + + ln -sf /dev/hdc /dev/cdrom + mkdir /mnt/cdrom + mount /dev/cdrom /mnt/cdrom -t iso9660 -o ro + +If, after doing all of the above, mount doesn't work and you see +errors from the driver (with dmesg) complaining about `status=0xff', +this means that the hardware is not responding to the driver's attempts +to read it. One of the following is probably the problem: + + - Your hardware is broken. + + - You are using the wrong address for the device, or you have the + drive jumpered wrong. Review the configuration instructions above. + + - Your IDE controller requires some nonstandard initialization sequence + before it will work properly. If this is the case, there will often + be a separate MS-DOS driver just for the controller. IDE interfaces + on sound cards usually fall into this category. Such configurations + can often be made to work by first booting MS-DOS, loading the + appropriate drivers, and then warm-booting linux (without powering + off). This can be automated using loadlin in the MS-DOS autoexec. + +If you always get timeout errors, interrupts from the drive are probably +not making it to the host. Check how you have the hardware jumpered +and make sure it matches what the driver expects (see the configuration +instructions above). If you have a PCI system, also check the BIOS +setup; I've had one report of a system which was shipped with IRQ 15 +disabled by the BIOS. + +The kernel is able to execute binaries directly off of the cdrom, +provided it is mounted with the default block size of 1024 (as above). + +Please pass on any feedback on any of this stuff to the maintainer, +whose address can be found in linux/MAINTAINERS. + +The IDE driver is modularized. The high level disk/CD-ROM/tape/floppy +drivers can always be compiled as loadable modules, the chipset drivers +can only be compiled into the kernel, and the core code (ide.c) can be +compiled as a loadable module provided no chipset support is needed. + +When using ide.c as a module in combination with kmod, add: + + alias block-major-3 ide-probe + +to /etc/modprobe.conf. + +When ide.c is used as a module, you can pass command line parameters to the +driver using the "options=" keyword to insmod, while replacing any ',' with +';'. + + +================================================================================ + +Summary of ide driver parameters for kernel command line +-------------------------------------------------------- + +For legacy IDE VLB host drivers (ali14xx/dtc2278/ht6560b/qd65xx/umc8672) +you need to explicitly enable probing by using "probe" kernel parameter, +i.e. to enable probing for ALI M14xx chipsets (ali14xx host driver) use: + +* "ali14xx.probe" boot option when ali14xx driver is built-in the kernel + +* "probe" module parameter when ali14xx driver is compiled as module + ("modprobe ali14xx probe") + +Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb" +kernel paremeter to enable probing for VLB version of the chipset (PCI ones +are detected automatically). + +You also need to use "probe" kernel parameter for ide-4drives driver +(support for IDE generic chipset with four drives on one port). + +To enable support for IDE doublers on Amiga use "doubler" kernel parameter +for gayle host driver (i.e. "gayle.doubler" if the driver is built-in). + +To force ignoring cable detection (this should be needed only if you're using +short 40-wires cable which cannot be automatically detected - if this is not +a case please report it as a bug instead) use "ignore_cable" kernel parameter: + +* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in + (i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1") + +* "ignore_cable=[interface_number]" module parameter (for ide_core module) + if IDE is compiled as module + +Other kernel parameters for ide_core are: + +* "nodma=[interface_number.device_number]" to disallow DMA for a device + +* "noflush=[interface_number.device_number]" to disable flush requests + +* "nohpa=[interface_number.device_number]" to disable Host Protected Area + +* "noprobe=[interface_number.device_number]" to skip probing + +* "nowerr=[interface_number.device_number]" to ignore the WRERR_STAT bit + +* "cdrom=[interface_number.device_number]" to force device as a CD-ROM + +* "chs=[interface_number.device_number]" to force device as a disk (using CHS) + +================================================================================ + +Some Terminology +---------------- +IDE = Integrated Drive Electronics, meaning that each drive has a built-in +controller, which is why an "IDE interface card" is not a "controller card". + +ATA = AT (the old IBM 286 computer) Attachment Interface, a draft American +National Standard for connecting hard drives to PCs. This is the official +name for "IDE". + +The latest standards define some enhancements, known as the ATA-6 spec, +which grew out of vendor-specific "Enhanced IDE" (EIDE) implementations. + +ATAPI = ATA Packet Interface, a new protocol for controlling the drives, +similar to SCSI protocols, created at the same time as the ATA2 standard. +ATAPI is currently used for controlling CDROM, TAPE and FLOPPY (ZIP or +LS120/240) devices, removable R/W cartridges, and for high capacity hard disk +drives. + +mlord@pobox.com +-- + +Wed Apr 17 22:52:44 CEST 2002 edited by Marcin Dalecki, the current +maintainer. + +Wed Aug 20 22:31:29 CEST 2003 updated ide boot options to current ide.c +comments at 2.6.0-test4 time. Maciej Soltysiak diff --git a/Documentation/ide/warm-plug-howto.txt b/Documentation/ide/warm-plug-howto.txt new file mode 100644 index 00000000..98152bcd --- /dev/null +++ b/Documentation/ide/warm-plug-howto.txt @@ -0,0 +1,18 @@ + +IDE warm-plug HOWTO +=================== + +To warm-plug devices on a port 'idex': + +# echo -n "1" > /sys/class/ide_port/idex/delete_devices + +unplug old device(s) and plug new device(s) + +# echo -n "1" > /sys/class/ide_port/idex/scan + +done + +NOTE: please make sure that partitions are unmounted and that there are +no other active references to devices before doing "delete_devices" step, +also do not attempt "scan" step on devices currently in use -- otherwise +results may be unpredictable and lead to data loss if you're unlucky -- cgit v1.2.3