From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- Documentation/driver-model/binding.txt | 102 +++++++++++++++++++++++++++++++++ 1 file changed, 102 insertions(+) create mode 100644 Documentation/driver-model/binding.txt (limited to 'Documentation/driver-model/binding.txt') diff --git a/Documentation/driver-model/binding.txt b/Documentation/driver-model/binding.txt new file mode 100644 index 00000000..f7ec9d62 --- /dev/null +++ b/Documentation/driver-model/binding.txt @@ -0,0 +1,102 @@ + +Driver Binding + +Driver binding is the process of associating a device with a device +driver that can control it. Bus drivers have typically handled this +because there have been bus-specific structures to represent the +devices and the drivers. With generic device and device driver +structures, most of the binding can take place using common code. + + +Bus +~~~ + +The bus type structure contains a list of all devices that are on that bus +type in the system. When device_register is called for a device, it is +inserted into the end of this list. The bus object also contains a +list of all drivers of that bus type. When driver_register is called +for a driver, it is inserted at the end of this list. These are the +two events which trigger driver binding. + + +device_register +~~~~~~~~~~~~~~~ + +When a new device is added, the bus's list of drivers is iterated over +to find one that supports it. In order to determine that, the device +ID of the device must match one of the device IDs that the driver +supports. The format and semantics for comparing IDs is bus-specific. +Instead of trying to derive a complex state machine and matching +algorithm, it is up to the bus driver to provide a callback to compare +a device against the IDs of a driver. The bus returns 1 if a match was +found; 0 otherwise. + +int match(struct device * dev, struct device_driver * drv); + +If a match is found, the device's driver field is set to the driver +and the driver's probe callback is called. This gives the driver a +chance to verify that it really does support the hardware, and that +it's in a working state. + +Device Class +~~~~~~~~~~~~ + +Upon the successful completion of probe, the device is registered with +the class to which it belongs. Device drivers belong to one and only one +class, and that is set in the driver's devclass field. +devclass_add_device is called to enumerate the device within the class +and actually register it with the class, which happens with the +class's register_dev callback. + +NOTE: The device class structures and core routines to manipulate them +are not in the mainline kernel, so the discussion is still a bit +speculative. + + +Driver +~~~~~~ + +When a driver is attached to a device, the device is inserted into the +driver's list of devices. + + +sysfs +~~~~~ + +A symlink is created in the bus's 'devices' directory that points to +the device's directory in the physical hierarchy. + +A symlink is created in the driver's 'devices' directory that points +to the device's directory in the physical hierarchy. + +A directory for the device is created in the class's directory. A +symlink is created in that directory that points to the device's +physical location in the sysfs tree. + +A symlink can be created (though this isn't done yet) in the device's +physical directory to either its class directory, or the class's +top-level directory. One can also be created to point to its driver's +directory also. + + +driver_register +~~~~~~~~~~~~~~~ + +The process is almost identical for when a new driver is added. +The bus's list of devices is iterated over to find a match. Devices +that already have a driver are skipped. All the devices are iterated +over, to bind as many devices as possible to the driver. + + +Removal +~~~~~~~ + +When a device is removed, the reference count for it will eventually +go to 0. When it does, the remove callback of the driver is called. It +is removed from the driver's list of devices and the reference count +of the driver is decremented. All symlinks between the two are removed. + +When a driver is removed, the list of devices that it supports is +iterated over, and the driver's remove callback is called for each +one. The device is removed from that list and the symlinks removed. + -- cgit v1.2.3