From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- Documentation/arm/OMAP/DSS | 318 +++++++++++++++++++++++++++++++++++++++++ Documentation/arm/OMAP/omap_pm | 154 ++++++++++++++++++++ 2 files changed, 472 insertions(+) create mode 100644 Documentation/arm/OMAP/DSS create mode 100644 Documentation/arm/OMAP/omap_pm (limited to 'Documentation/arm/OMAP') diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS new file mode 100644 index 00000000..888ae7b8 --- /dev/null +++ b/Documentation/arm/OMAP/DSS @@ -0,0 +1,318 @@ +OMAP2/3 Display Subsystem +------------------------- + +This is an almost total rewrite of the OMAP FB driver in drivers/video/omap +(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI, +TV-out and multiple display support, but there are lots of small improvements +also. + +The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB, +panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live +currently side by side, you can choose which one to use. + +Features +-------- + +Working and tested features include: + +- MIPI DPI (parallel) output +- MIPI DSI output in command mode +- MIPI DBI (RFBI) output +- SDI output +- TV output +- All pieces can be compiled as a module or inside kernel +- Use DISPC to update any of the outputs +- Use CPU to update RFBI or DSI output +- OMAP DISPC planes +- RGB16, RGB24 packed, RGB24 unpacked +- YUV2, UYVY +- Scaling +- Adjusting DSS FCK to find a good pixel clock +- Use DSI DPLL to create DSS FCK + +Tested boards include: +- OMAP3 SDP board +- Beagle board +- N810 + +omapdss driver +-------------- + +The DSS driver does not itself have any support for Linux framebuffer, V4L or +such like the current ones, but it has an internal kernel API that upper level +drivers can use. + +The DSS driver models OMAP's overlays, overlay managers and displays in a +flexible way to enable non-common multi-display configuration. In addition to +modelling the hardware overlays, omapdss supports virtual overlays and overlay +managers. These can be used when updating a display with CPU or system DMA. + +Panel and controller drivers +---------------------------- + +The drivers implement panel or controller specific functionality and are not +usually visible to users except through omapfb driver. They register +themselves to the DSS driver. + +omapfb driver +------------- + +The omapfb driver implements arbitrary number of standard linux framebuffers. +These framebuffers can be routed flexibly to any overlays, thus allowing very +dynamic display architecture. + +The driver exports some omapfb specific ioctls, which are compatible with the +ioctls in the old driver. + +The rest of the non standard features are exported via sysfs. Whether the final +implementation will use sysfs, or ioctls, is still open. + +V4L2 drivers +------------ + +V4L2 is being implemented in TI. + +From omapdss point of view the V4L2 drivers should be similar to framebuffer +driver. + +Architecture +-------------------- + +Some clarification what the different components do: + + - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the + pixel data for the image. Framebuffer has width and height and color + depth. + - Overlay defines where the pixels are read from and where they go on the + screen. The overlay may be smaller than framebuffer, thus displaying only + part of the framebuffer. The position of the overlay may be changed if + the overlay is smaller than the display. + - Overlay manager combines the overlays in to one image and feeds them to + display. + - Display is the actual physical display device. + +A framebuffer can be connected to multiple overlays to show the same pixel data +on all of the overlays. Note that in this case the overlay input sizes must be +the same, but, in case of video overlays, the output size can be different. Any +framebuffer can be connected to any overlay. + +An overlay can be connected to one overlay manager. Also DISPC overlays can be +connected only to DISPC overlay managers, and virtual overlays can be only +connected to virtual overlays. + +An overlay manager can be connected to one display. There are certain +restrictions which kinds of displays an overlay manager can be connected: + + - DISPC TV overlay manager can be only connected to TV display. + - Virtual overlay managers can only be connected to DBI or DSI displays. + - DISPC LCD overlay manager can be connected to all displays, except TV + display. + +Sysfs +----- +The sysfs interface is mainly used for testing. I don't think sysfs +interface is the best for this in the final version, but I don't quite know +what would be the best interfaces for these things. + +The sysfs interface is divided to two parts: DSS and FB. + +/sys/class/graphics/fb? directory: +mirror 0=off, 1=on +rotate Rotation 0-3 for 0, 90, 180, 270 degrees +rotate_type 0 = DMA rotation, 1 = VRFB rotation +overlays List of overlay numbers to which framebuffer pixels go +phys_addr Physical address of the framebuffer +virt_addr Virtual address of the framebuffer +size Size of the framebuffer + +/sys/devices/platform/omapdss/overlay? directory: +enabled 0=off, 1=on +input_size width,height (ie. the framebuffer size) +manager Destination overlay manager name +name +output_size width,height +position x,y +screen_width width +global_alpha global alpha 0-255 0=transparent 255=opaque + +/sys/devices/platform/omapdss/manager? directory: +display Destination display +name +alpha_blending_enabled 0=off, 1=on +trans_key_enabled 0=off, 1=on +trans_key_type gfx-destination, video-source +trans_key_value transparency color key (RGB24) +default_color default background color (RGB24) + +/sys/devices/platform/omapdss/display? directory: +ctrl_name Controller name +mirror 0=off, 1=on +update_mode 0=off, 1=auto, 2=manual +enabled 0=off, 1=on +name +rotate Rotation 0-3 for 0, 90, 180, 270 degrees +timings Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw) + When writing, two special timings are accepted for tv-out: + "pal" and "ntsc" +panel_name +tear_elim Tearing elimination 0=off, 1=on + +There are also some debugfs files at /omapdss/ which show information +about clocks and registers. + +Examples +-------- + +The following definitions have been made for the examples below: + +ovl0=/sys/devices/platform/omapdss/overlay0 +ovl1=/sys/devices/platform/omapdss/overlay1 +ovl2=/sys/devices/platform/omapdss/overlay2 + +mgr0=/sys/devices/platform/omapdss/manager0 +mgr1=/sys/devices/platform/omapdss/manager1 + +lcd=/sys/devices/platform/omapdss/display0 +dvi=/sys/devices/platform/omapdss/display1 +tv=/sys/devices/platform/omapdss/display2 + +fb0=/sys/class/graphics/fb0 +fb1=/sys/class/graphics/fb1 +fb2=/sys/class/graphics/fb2 + +Default setup on OMAP3 SDP +-------------------------- + +Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI +and TV-out are not in use. The columns from left to right are: +framebuffers, overlays, overlay managers, displays. Framebuffers are +handled by omapfb, and the rest by the DSS. + +FB0 --- GFX -\ DVI +FB1 --- VID1 --+- LCD ---- LCD +FB2 --- VID2 -/ TV ----- TV + +Example: Switch from LCD to DVI +---------------------- + +w=`cat $dvi/timings | cut -d "," -f 2 | cut -d "/" -f 1` +h=`cat $dvi/timings | cut -d "," -f 3 | cut -d "/" -f 1` + +echo "0" > $lcd/enabled +echo "" > $mgr0/display +fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h +# at this point you have to switch the dvi/lcd dip-switch from the omap board +echo "dvi" > $mgr0/display +echo "1" > $dvi/enabled + +After this the configuration looks like: + +FB0 --- GFX -\ -- DVI +FB1 --- VID1 --+- LCD -/ LCD +FB2 --- VID2 -/ TV ----- TV + +Example: Clone GFX overlay to LCD and TV +------------------------------- + +w=`cat $tv/timings | cut -d "," -f 2 | cut -d "/" -f 1` +h=`cat $tv/timings | cut -d "," -f 3 | cut -d "/" -f 1` + +echo "0" > $ovl0/enabled +echo "0" > $ovl1/enabled + +echo "" > $fb1/overlays +echo "0,1" > $fb0/overlays + +echo "$w,$h" > $ovl1/output_size +echo "tv" > $ovl1/manager + +echo "1" > $ovl0/enabled +echo "1" > $ovl1/enabled + +echo "1" > $tv/enabled + +After this the configuration looks like (only relevant parts shown): + +FB0 +-- GFX ---- LCD ---- LCD + \- VID1 ---- TV ---- TV + +Misc notes +---------- + +OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator. + +Using DSI DPLL to generate pixel clock it is possible produce the pixel clock +of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI. + +Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB +does not support mirroring. + +VRFB rotation requires much more memory than non-rotated framebuffer, so you +probably need to increase your vram setting before using VRFB rotation. Also, +many applications may not work with VRFB if they do not pay attention to all +framebuffer parameters. + +Kernel boot arguments +--------------------- + +vram=[,] + - Amount of total VRAM to preallocate and optionally a physical start + memory address. For example, "10M". omapfb allocates memory for + framebuffers from VRAM. + +omapfb.mode=:[,...] + - Default video mode for specified displays. For example, + "dvi:800x400MR-24@60". See drivers/video/modedb.c. + There are also two special modes: "pal" and "ntsc" that + can be used to tv out. + +omapfb.vram=:[@][,...] + - VRAM allocated for a framebuffer. Normally omapfb allocates vram + depending on the display size. With this you can manually allocate + more or define the physical address of each framebuffer. For example, + "1:4M" to allocate 4M for fb1. + +omapfb.debug= + - Enable debug printing. You have to have OMAPFB debug support enabled + in kernel config. + +omapfb.test= + - Draw test pattern to framebuffer whenever framebuffer settings change. + You need to have OMAPFB debug support enabled in kernel config. + +omapfb.vrfb= + - Use VRFB rotation for all framebuffers. + +omapfb.rotate= + - Default rotation applied to all framebuffers. + 0 - 0 degree rotation + 1 - 90 degree rotation + 2 - 180 degree rotation + 3 - 270 degree rotation + +omapfb.mirror= + - Default mirror for all framebuffers. Only works with DMA rotation. + +omapdss.def_disp= + - Name of default display, to which all overlays will be connected. + Common examples are "lcd" or "tv". + +omapdss.debug= + - Enable debug printing. You have to have DSS debug support enabled in + kernel config. + +TODO +---- + +DSS locking + +Error checking +- Lots of checks are missing or implemented just as BUG() + +System DMA update for DSI +- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how + to skip the empty byte?) + +OMAP1 support +- Not sure if needed + diff --git a/Documentation/arm/OMAP/omap_pm b/Documentation/arm/OMAP/omap_pm new file mode 100644 index 00000000..9012bb03 --- /dev/null +++ b/Documentation/arm/OMAP/omap_pm @@ -0,0 +1,154 @@ + +The OMAP PM interface +===================== + +This document describes the temporary OMAP PM interface. Driver +authors use these functions to communicate minimum latency or +throughput constraints to the kernel power management code. +Over time, the intention is to merge features from the OMAP PM +interface into the Linux PM QoS code. + +Drivers need to express PM parameters which: + +- support the range of power management parameters present in the TI SRF; + +- separate the drivers from the underlying PM parameter + implementation, whether it is the TI SRF or Linux PM QoS or Linux + latency framework or something else; + +- specify PM parameters in terms of fundamental units, such as + latency and throughput, rather than units which are specific to OMAP + or to particular OMAP variants; + +- allow drivers which are shared with other architectures (e.g., + DaVinci) to add these constraints in a way which won't affect non-OMAP + systems, + +- can be implemented immediately with minimal disruption of other + architectures. + + +This document proposes the OMAP PM interface, including the following +five power management functions for driver code: + +1. Set the maximum MPU wakeup latency: + (*pdata->set_max_mpu_wakeup_lat)(struct device *dev, unsigned long t) + +2. Set the maximum device wakeup latency: + (*pdata->set_max_dev_wakeup_lat)(struct device *dev, unsigned long t) + +3. Set the maximum system DMA transfer start latency (CORE pwrdm): + (*pdata->set_max_sdma_lat)(struct device *dev, long t) + +4. Set the minimum bus throughput needed by a device: + (*pdata->set_min_bus_tput)(struct device *dev, u8 agent_id, unsigned long r) + +5. Return the number of times the device has lost context + (*pdata->get_dev_context_loss_count)(struct device *dev) + + +Further documentation for all OMAP PM interface functions can be +found in arch/arm/plat-omap/include/mach/omap-pm.h. + + +The OMAP PM layer is intended to be temporary +--------------------------------------------- + +The intention is that eventually the Linux PM QoS layer should support +the range of power management features present in OMAP3. As this +happens, existing drivers using the OMAP PM interface can be modified +to use the Linux PM QoS code; and the OMAP PM interface can disappear. + + +Driver usage of the OMAP PM functions +------------------------------------- + +As the 'pdata' in the above examples indicates, these functions are +exposed to drivers through function pointers in driver .platform_data +structures. The function pointers are initialized by the board-*.c +files to point to the corresponding OMAP PM functions: +.set_max_dev_wakeup_lat will point to +omap_pm_set_max_dev_wakeup_lat(), etc. Other architectures which do +not support these functions should leave these function pointers set +to NULL. Drivers should use the following idiom: + + if (pdata->set_max_dev_wakeup_lat) + (*pdata->set_max_dev_wakeup_lat)(dev, t); + +The most common usage of these functions will probably be to specify +the maximum time from when an interrupt occurs, to when the device +becomes accessible. To accomplish this, driver writers should use the +set_max_mpu_wakeup_lat() function to to constrain the MPU wakeup +latency, and the set_max_dev_wakeup_lat() function to constrain the +device wakeup latency (from clk_enable() to accessibility). For +example, + + /* Limit MPU wakeup latency */ + if (pdata->set_max_mpu_wakeup_lat) + (*pdata->set_max_mpu_wakeup_lat)(dev, tc); + + /* Limit device powerdomain wakeup latency */ + if (pdata->set_max_dev_wakeup_lat) + (*pdata->set_max_dev_wakeup_lat)(dev, td); + + /* total wakeup latency in this example: (tc + td) */ + +The PM parameters can be overwritten by calling the function again +with the new value. The settings can be removed by calling the +function with a t argument of -1 (except in the case of +set_max_bus_tput(), which should be called with an r argument of 0). + +The fifth function above, omap_pm_get_dev_context_loss_count(), +is intended as an optimization to allow drivers to determine whether the +device has lost its internal context. If context has been lost, the +driver must restore its internal context before proceeding. + + +Other specialized interface functions +------------------------------------- + +The five functions listed above are intended to be usable by any +device driver. DSPBridge and CPUFreq have a few special requirements. +DSPBridge expresses target DSP performance levels in terms of OPP IDs. +CPUFreq expresses target MPU performance levels in terms of MPU +frequency. The OMAP PM interface contains functions for these +specialized cases to convert that input information (OPPs/MPU +frequency) into the form that the underlying power management +implementation needs: + +6. (*pdata->dsp_get_opp_table)(void) + +7. (*pdata->dsp_set_min_opp)(u8 opp_id) + +8. (*pdata->dsp_get_opp)(void) + +9. (*pdata->cpu_get_freq_table)(void) + +10. (*pdata->cpu_set_freq)(unsigned long f) + +11. (*pdata->cpu_get_freq)(void) + +Customizing OPP for platform +============================ +Defining CONFIG_PM should enable OPP layer for the silicon +and the registration of OPP table should take place automatically. +However, in special cases, the default OPP table may need to be +tweaked, for e.g.: + * enable default OPPs which are disabled by default, but which + could be enabled on a platform + * Disable an unsupported OPP on the platform + * Define and add a custom opp table entry +in these cases, the board file needs to do additional steps as follows: +arch/arm/mach-omapx/board-xyz.c + #include "pm.h" + .... + static void __init omap_xyz_init_irq(void) + { + .... + /* Initialize the default table */ + omapx_opp_init(); + /* Do customization to the defaults */ + .... + } +NOTE: omapx_opp_init will be omap3_opp_init or as required +based on the omap family. -- cgit v1.2.3