1 files changed, 88 insertions, 0 deletions
diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c
new file mode 100644
index 00000000..7453c833
--- /dev/null
+++ b/arch/arm/boot/compressed/mmcif-sh7372.c
@@ -0,0 +1,88 @@
+/*
+ * sh7372 MMCIF loader
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/boot.h>
+#include <mach/mmc.h>
+
+#define MMCIF_BASE      (void __iomem *)0xe6bd0000
+
+#define PORT84CR	(void __iomem *)0xe6050054
+#define PORT85CR	(void __iomem *)0xe6050055
+#define PORT86CR	(void __iomem *)0xe6050056
+#define PORT87CR	(void __iomem *)0xe6050057
+#define PORT88CR	(void __iomem *)0xe6050058
+#define PORT89CR	(void __iomem *)0xe6050059
+#define PORT90CR	(void __iomem *)0xe605005a
+#define PORT91CR	(void __iomem *)0xe605005b
+#define PORT92CR	(void __iomem *)0xe605005c
+#define PORT99CR	(void __iomem *)0xe6050063
+
+#define SMSTPCR3	(void __iomem *)0xe615013c
+
+/* SH7372 specific MMCIF loader
+ *
+ * loads the zImage from an MMC card starting from block 1.
+ *
+ * The image must be start with a vrl4 header and
+ * the zImage must start at offset 512 of the image. That is,
+ * at block 2 (=byte 1024) on the media
+ *
+ * Use the following line to write the vrl4 formated zImage
+ * to an MMC card
+ * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
+ */
+asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
+{
+	mmc_init_progress();
+	mmc_update_progress(MMC_PROGRESS_ENTER);
+
+	/* Initialise MMC
+	 * registers: PORT84CR-PORT92CR
+	 *            (MMCD0_0-MMCD0_7,MMCCMD0 Control)
+	 * value: 0x04 - select function 4
+	 */
+	 __raw_writeb(0x04, PORT84CR);
+	 __raw_writeb(0x04, PORT85CR);
+	 __raw_writeb(0x04, PORT86CR);
+	 __raw_writeb(0x04, PORT87CR);
+	 __raw_writeb(0x04, PORT88CR);
+	 __raw_writeb(0x04, PORT89CR);
+	 __raw_writeb(0x04, PORT90CR);
+	 __raw_writeb(0x04, PORT91CR);
+	 __raw_writeb(0x04, PORT92CR);
+
+	/* Initialise MMC
+	 * registers: PORT99CR (MMCCLK0 Control)
+	 * value: 0x10 | 0x04 - enable output | select function 4
+	 */
+	__raw_writeb(0x14, PORT99CR);
+
+	/* Enable clock to MMC hardware block */
+	__raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
+
+	mmc_update_progress(MMC_PROGRESS_INIT);
+
+	/* setup MMCIF hardware */
+	sh_mmcif_boot_init(MMCIF_BASE);
+
+	mmc_update_progress(MMC_PROGRESS_LOAD);
+
+	/* load kernel via MMCIF interface */
+	sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
+			      (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf);
+
+
+	/* Disable clock to MMC hardware block */
+	__raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3);
+
+	mmc_update_progress(MMC_PROGRESS_DONE);
+}