aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/vm/slub.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/vm/slub.txt')
-rw-r--r--Documentation/vm/slub.txt280
1 files changed, 280 insertions, 0 deletions
diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt
new file mode 100644
index 00000000..07375e73
--- /dev/null
+++ b/Documentation/vm/slub.txt
@@ -0,0 +1,280 @@
+Short users guide for SLUB
+--------------------------
+
+The basic philosophy of SLUB is very different from SLAB. SLAB
+requires rebuilding the kernel to activate debug options for all
+slab caches. SLUB always includes full debugging but it is off by default.
+SLUB can enable debugging only for selected slabs in order to avoid
+an impact on overall system performance which may make a bug more
+difficult to find.
+
+In order to switch debugging on one can add a option "slub_debug"
+to the kernel command line. That will enable full debugging for
+all slabs.
+
+Typically one would then use the "slabinfo" command to get statistical
+data and perform operation on the slabs. By default slabinfo only lists
+slabs that have data in them. See "slabinfo -h" for more options when
+running the command. slabinfo can be compiled with
+
+gcc -o slabinfo Documentation/vm/slabinfo.c
+
+Some of the modes of operation of slabinfo require that slub debugging
+be enabled on the command line. F.e. no tracking information will be
+available without debugging on and validation can only partially
+be performed if debugging was not switched on.
+
+Some more sophisticated uses of slub_debug:
+-------------------------------------------
+
+Parameters may be given to slub_debug. If none is specified then full
+debugging is enabled. Format:
+
+slub_debug=<Debug-Options> Enable options for all slabs
+slub_debug=<Debug-Options>,<slab name>
+ Enable options only for select slabs
+
+Possible debug options are
+ F Sanity checks on (enables SLAB_DEBUG_FREE. Sorry
+ SLAB legacy issues)
+ Z Red zoning
+ P Poisoning (object and padding)
+ U User tracking (free and alloc)
+ T Trace (please only use on single slabs)
+ A Toggle failslab filter mark for the cache
+ O Switch debugging off for caches that would have
+ caused higher minimum slab orders
+ - Switch all debugging off (useful if the kernel is
+ configured with CONFIG_SLUB_DEBUG_ON)
+
+F.e. in order to boot just with sanity checks and red zoning one would specify:
+
+ slub_debug=FZ
+
+Trying to find an issue in the dentry cache? Try
+
+ slub_debug=,dentry
+
+to only enable debugging on the dentry cache.
+
+Red zoning and tracking may realign the slab. We can just apply sanity checks
+to the dentry cache with
+
+ slub_debug=F,dentry
+
+Debugging options may require the minimum possible slab order to increase as
+a result of storing the metadata (for example, caches with PAGE_SIZE object
+sizes). This has a higher liklihood of resulting in slab allocation errors
+in low memory situations or if there's high fragmentation of memory. To
+switch off debugging for such caches by default, use
+
+ slub_debug=O
+
+In case you forgot to enable debugging on the kernel command line: It is
+possible to enable debugging manually when the kernel is up. Look at the
+contents of:
+
+/sys/kernel/slab/<slab name>/
+
+Look at the writable files. Writing 1 to them will enable the
+corresponding debug option. All options can be set on a slab that does
+not contain objects. If the slab already contains objects then sanity checks
+and tracing may only be enabled. The other options may cause the realignment
+of objects.
+
+Careful with tracing: It may spew out lots of information and never stop if
+used on the wrong slab.
+
+Slab merging
+------------
+
+If no debug options are specified then SLUB may merge similar slabs together
+in order to reduce overhead and increase cache hotness of objects.
+slabinfo -a displays which slabs were merged together.
+
+Slab validation
+---------------
+
+SLUB can validate all object if the kernel was booted with slub_debug. In
+order to do so you must have the slabinfo tool. Then you can do
+
+slabinfo -v
+
+which will test all objects. Output will be generated to the syslog.
+
+This also works in a more limited way if boot was without slab debug.
+In that case slabinfo -v simply tests all reachable objects. Usually
+these are in the cpu slabs and the partial slabs. Full slabs are not
+tracked by SLUB in a non debug situation.
+
+Getting more performance
+------------------------
+
+To some degree SLUB's performance is limited by the need to take the
+list_lock once in a while to deal with partial slabs. That overhead is
+governed by the order of the allocation for each slab. The allocations
+can be influenced by kernel parameters:
+
+slub_min_objects=x (default 4)
+slub_min_order=x (default 0)
+slub_max_order=x (default 1)
+
+slub_min_objects allows to specify how many objects must at least fit
+into one slab in order for the allocation order to be acceptable.
+In general slub will be able to perform this number of allocations
+on a slab without consulting centralized resources (list_lock) where
+contention may occur.
+
+slub_min_order specifies a minim order of slabs. A similar effect like
+slub_min_objects.
+
+slub_max_order specified the order at which slub_min_objects should no
+longer be checked. This is useful to avoid SLUB trying to generate
+super large order pages to fit slub_min_objects of a slab cache with
+large object sizes into one high order page.
+
+SLUB Debug output
+-----------------
+
+Here is a sample of slub debug output:
+
+====================================================================
+BUG kmalloc-8: Redzone overwritten
+--------------------------------------------------------------------
+
+INFO: 0xc90f6d28-0xc90f6d2b. First byte 0x00 instead of 0xcc
+INFO: Slab 0xc528c530 flags=0x400000c3 inuse=61 fp=0xc90f6d58
+INFO: Object 0xc90f6d20 @offset=3360 fp=0xc90f6d58
+INFO: Allocated in get_modalias+0x61/0xf5 age=53 cpu=1 pid=554
+
+Bytes b4 0xc90f6d10: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
+ Object 0xc90f6d20: 31 30 31 39 2e 30 30 35 1019.005
+ Redzone 0xc90f6d28: 00 cc cc cc .
+ Padding 0xc90f6d50: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
+
+ [<c010523d>] dump_trace+0x63/0x1eb
+ [<c01053df>] show_trace_log_lvl+0x1a/0x2f
+ [<c010601d>] show_trace+0x12/0x14
+ [<c0106035>] dump_stack+0x16/0x18
+ [<c017e0fa>] object_err+0x143/0x14b
+ [<c017e2cc>] check_object+0x66/0x234
+ [<c017eb43>] __slab_free+0x239/0x384
+ [<c017f446>] kfree+0xa6/0xc6
+ [<c02e2335>] get_modalias+0xb9/0xf5
+ [<c02e23b7>] dmi_dev_uevent+0x27/0x3c
+ [<c027866a>] dev_uevent+0x1ad/0x1da
+ [<c0205024>] kobject_uevent_env+0x20a/0x45b
+ [<c020527f>] kobject_uevent+0xa/0xf
+ [<c02779f1>] store_uevent+0x4f/0x58
+ [<c027758e>] dev_attr_store+0x29/0x2f
+ [<c01bec4f>] sysfs_write_file+0x16e/0x19c
+ [<c0183ba7>] vfs_write+0xd1/0x15a
+ [<c01841d7>] sys_write+0x3d/0x72
+ [<c0104112>] sysenter_past_esp+0x5f/0x99
+ [<b7f7b410>] 0xb7f7b410
+ =======================
+
+FIX kmalloc-8: Restoring Redzone 0xc90f6d28-0xc90f6d2b=0xcc
+
+If SLUB encounters a corrupted object (full detection requires the kernel
+to be booted with slub_debug) then the following output will be dumped
+into the syslog:
+
+1. Description of the problem encountered
+
+This will be a message in the system log starting with
+
+===============================================
+BUG <slab cache affected>: <What went wrong>
+-----------------------------------------------
+
+INFO: <corruption start>-<corruption_end> <more info>
+INFO: Slab <address> <slab information>
+INFO: Object <address> <object information>
+INFO: Allocated in <kernel function> age=<jiffies since alloc> cpu=<allocated by
+ cpu> pid=<pid of the process>
+INFO: Freed in <kernel function> age=<jiffies since free> cpu=<freed by cpu>
+ pid=<pid of the process>
+
+(Object allocation / free information is only available if SLAB_STORE_USER is
+set for the slab. slub_debug sets that option)
+
+2. The object contents if an object was involved.
+
+Various types of lines can follow the BUG SLUB line:
+
+Bytes b4 <address> : <bytes>
+ Shows a few bytes before the object where the problem was detected.
+ Can be useful if the corruption does not stop with the start of the
+ object.
+
+Object <address> : <bytes>
+ The bytes of the object. If the object is inactive then the bytes
+ typically contain poison values. Any non-poison value shows a
+ corruption by a write after free.
+
+Redzone <address> : <bytes>
+ The Redzone following the object. The Redzone is used to detect
+ writes after the object. All bytes should always have the same
+ value. If there is any deviation then it is due to a write after
+ the object boundary.
+
+ (Redzone information is only available if SLAB_RED_ZONE is set.
+ slub_debug sets that option)
+
+Padding <address> : <bytes>
+ Unused data to fill up the space in order to get the next object
+ properly aligned. In the debug case we make sure that there are
+ at least 4 bytes of padding. This allows the detection of writes
+ before the object.
+
+3. A stackdump
+
+The stackdump describes the location where the error was detected. The cause
+of the corruption is may be more likely found by looking at the function that
+allocated or freed the object.
+
+4. Report on how the problem was dealt with in order to ensure the continued
+operation of the system.
+
+These are messages in the system log beginning with
+
+FIX <slab cache affected>: <corrective action taken>
+
+In the above sample SLUB found that the Redzone of an active object has
+been overwritten. Here a string of 8 characters was written into a slab that
+has the length of 8 characters. However, a 8 character string needs a
+terminating 0. That zero has overwritten the first byte of the Redzone field.
+After reporting the details of the issue encountered the FIX SLUB message
+tells us that SLUB has restored the Redzone to its proper value and then
+system operations continue.
+
+Emergency operations:
+---------------------
+
+Minimal debugging (sanity checks alone) can be enabled by booting with
+
+ slub_debug=F
+
+This will be generally be enough to enable the resiliency features of slub
+which will keep the system running even if a bad kernel component will
+keep corrupting objects. This may be important for production systems.
+Performance will be impacted by the sanity checks and there will be a
+continual stream of error messages to the syslog but no additional memory
+will be used (unlike full debugging).
+
+No guarantees. The kernel component still needs to be fixed. Performance
+may be optimized further by locating the slab that experiences corruption
+and enabling debugging only for that cache
+
+I.e.
+
+ slub_debug=F,dentry
+
+If the corruption occurs by writing after the end of the object then it
+may be advisable to enable a Redzone to avoid corrupting the beginning
+of other objects.
+
+ slub_debug=FZ,dentry
+
+Christoph Lameter, May 30, 2007