aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/infiniband/user_mad.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/infiniband/user_mad.txt')
-rw-r--r--Documentation/infiniband/user_mad.txt148
1 files changed, 148 insertions, 0 deletions
diff --git a/Documentation/infiniband/user_mad.txt b/Documentation/infiniband/user_mad.txt
new file mode 100644
index 00000000..8a366959
--- /dev/null
+++ b/Documentation/infiniband/user_mad.txt
@@ -0,0 +1,148 @@
+USERSPACE MAD ACCESS
+
+Device files
+
+ Each port of each InfiniBand device has a "umad" device and an
+ "issm" device attached. For example, a two-port HCA will have two
+ umad devices and two issm devices, while a switch will have one
+ device of each type (for switch port 0).
+
+Creating MAD agents
+
+ A MAD agent can be created by filling in a struct ib_user_mad_reg_req
+ and then calling the IB_USER_MAD_REGISTER_AGENT ioctl on a file
+ descriptor for the appropriate device file. If the registration
+ request succeeds, a 32-bit id will be returned in the structure.
+ For example:
+
+ struct ib_user_mad_reg_req req = { /* ... */ };
+ ret = ioctl(fd, IB_USER_MAD_REGISTER_AGENT, (char *) &req);
+ if (!ret)
+ my_agent = req.id;
+ else
+ perror("agent register");
+
+ Agents can be unregistered with the IB_USER_MAD_UNREGISTER_AGENT
+ ioctl. Also, all agents registered through a file descriptor will
+ be unregistered when the descriptor is closed.
+
+Receiving MADs
+
+ MADs are received using read(). The receive side now supports
+ RMPP. The buffer passed to read() must be at least one
+ struct ib_user_mad + 256 bytes. For example:
+
+ If the buffer passed is not large enough to hold the received
+ MAD (RMPP), the errno is set to ENOSPC and the length of the
+ buffer needed is set in mad.length.
+
+ Example for normal MAD (non RMPP) reads:
+ struct ib_user_mad *mad;
+ mad = malloc(sizeof *mad + 256);
+ ret = read(fd, mad, sizeof *mad + 256);
+ if (ret != sizeof mad + 256) {
+ perror("read");
+ free(mad);
+ }
+
+ Example for RMPP reads:
+ struct ib_user_mad *mad;
+ mad = malloc(sizeof *mad + 256);
+ ret = read(fd, mad, sizeof *mad + 256);
+ if (ret == -ENOSPC)) {
+ length = mad.length;
+ free(mad);
+ mad = malloc(sizeof *mad + length);
+ ret = read(fd, mad, sizeof *mad + length);
+ }
+ if (ret < 0) {
+ perror("read");
+ free(mad);
+ }
+
+ In addition to the actual MAD contents, the other struct ib_user_mad
+ fields will be filled in with information on the received MAD. For
+ example, the remote LID will be in mad.lid.
+
+ If a send times out, a receive will be generated with mad.status set
+ to ETIMEDOUT. Otherwise when a MAD has been successfully received,
+ mad.status will be 0.
+
+ poll()/select() may be used to wait until a MAD can be read.
+
+Sending MADs
+
+ MADs are sent using write(). The agent ID for sending should be
+ filled into the id field of the MAD, the destination LID should be
+ filled into the lid field, and so on. The send side does support
+ RMPP so arbitrary length MAD can be sent. For example:
+
+ struct ib_user_mad *mad;
+
+ mad = malloc(sizeof *mad + mad_length);
+
+ /* fill in mad->data */
+
+ mad->hdr.id = my_agent; /* req.id from agent registration */
+ mad->hdr.lid = my_dest; /* in network byte order... */
+ /* etc. */
+
+ ret = write(fd, &mad, sizeof *mad + mad_length);
+ if (ret != sizeof *mad + mad_length)
+ perror("write");
+
+Transaction IDs
+
+ Users of the umad devices can use the lower 32 bits of the
+ transaction ID field (that is, the least significant half of the
+ field in network byte order) in MADs being sent to match
+ request/response pairs. The upper 32 bits are reserved for use by
+ the kernel and will be overwritten before a MAD is sent.
+
+P_Key Index Handling
+
+ The old ib_umad interface did not allow setting the P_Key index for
+ MADs that are sent and did not provide a way for obtaining the P_Key
+ index of received MADs. A new layout for struct ib_user_mad_hdr
+ with a pkey_index member has been defined; however, to preserve
+ binary compatibility with older applications, this new layout will
+ not be used unless the IB_USER_MAD_ENABLE_PKEY ioctl is called
+ before a file descriptor is used for anything else.
+
+ In September 2008, the IB_USER_MAD_ABI_VERSION will be incremented
+ to 6, the new layout of struct ib_user_mad_hdr will be used by
+ default, and the IB_USER_MAD_ENABLE_PKEY ioctl will be removed.
+
+Setting IsSM Capability Bit
+
+ To set the IsSM capability bit for a port, simply open the
+ corresponding issm device file. If the IsSM bit is already set,
+ then the open call will block until the bit is cleared (or return
+ immediately with errno set to EAGAIN if the O_NONBLOCK flag is
+ passed to open()). The IsSM bit will be cleared when the issm file
+ is closed. No read, write or other operations can be performed on
+ the issm file.
+
+/dev files
+
+ To create the appropriate character device files automatically with
+ udev, a rule like
+
+ KERNEL=="umad*", NAME="infiniband/%k"
+ KERNEL=="issm*", NAME="infiniband/%k"
+
+ can be used. This will create device nodes named
+
+ /dev/infiniband/umad0
+ /dev/infiniband/issm0
+
+ for the first port, and so on. The InfiniBand device and port
+ associated with these devices can be determined from the files
+
+ /sys/class/infiniband_mad/umad0/ibdev
+ /sys/class/infiniband_mad/umad0/port
+
+ and
+
+ /sys/class/infiniband_mad/issm0/ibdev
+ /sys/class/infiniband_mad/issm0/port