From ddd86436f4e3643c04b797f858dab95d5f2e4de9 Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 15:00:15 +0000 Subject: fish --- drivers/net/wireless/ath/ath6kl/sdio.c | 1477 ++++++++++++++++++++++++++++++++ 1 file changed, 1477 insertions(+) create mode 100644 drivers/net/wireless/ath/ath6kl/sdio.c (limited to 'drivers/net/wireless/ath/ath6kl/sdio.c') diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c new file mode 100644 index 0000000..8056fbc --- /dev/null +++ b/drivers/net/wireless/ath/ath6kl/sdio.c @@ -0,0 +1,1477 @@ +/* + * Copyright (c) 2004-2011 Atheros Communications Inc. + * Copyright (c) 2011-2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "hif.h" +#include "hif-ops.h" +#include "target.h" +#include "debug.h" +#include "cfg80211.h" +#include "trace.h" + +struct ath6kl_sdio { + struct sdio_func *func; + + /* protects access to bus_req_freeq */ + spinlock_t lock; + + /* free list */ + struct list_head bus_req_freeq; + + /* available bus requests */ + struct bus_request bus_req[BUS_REQUEST_MAX_NUM]; + + struct ath6kl *ar; + + u8 *dma_buffer; + + /* protects access to dma_buffer */ + struct mutex dma_buffer_mutex; + + /* scatter request list head */ + struct list_head scat_req; + + atomic_t irq_handling; + wait_queue_head_t irq_wq; + + /* protects access to scat_req */ + spinlock_t scat_lock; + + bool scatter_enabled; + + bool is_disabled; + const struct sdio_device_id *id; + struct work_struct wr_async_work; + struct list_head wr_asyncq; + + /* protects access to wr_asyncq */ + spinlock_t wr_async_lock; +}; + +#define CMD53_ARG_READ 0 +#define CMD53_ARG_WRITE 1 +#define CMD53_ARG_BLOCK_BASIS 1 +#define CMD53_ARG_FIXED_ADDRESS 0 +#define CMD53_ARG_INCR_ADDRESS 1 + +static inline struct ath6kl_sdio *ath6kl_sdio_priv(struct ath6kl *ar) +{ + return ar->hif_priv; +} + +/* + * Macro to check if DMA buffer is WORD-aligned and DMA-able. + * Most host controllers assume the buffer is DMA'able and will + * bug-check otherwise (i.e. buffers on the stack). virt_addr_valid + * check fails on stack memory. + */ +static inline bool buf_needs_bounce(u8 *buf) +{ + return ((unsigned long) buf & 0x3) || !virt_addr_valid(buf); +} + +static void ath6kl_sdio_set_mbox_info(struct ath6kl *ar) +{ + struct ath6kl_mbox_info *mbox_info = &ar->mbox_info; + + /* EP1 has an extended range */ + mbox_info->htc_addr = HIF_MBOX_BASE_ADDR; + mbox_info->htc_ext_addr = HIF_MBOX0_EXT_BASE_ADDR; + mbox_info->htc_ext_sz = HIF_MBOX0_EXT_WIDTH; + mbox_info->block_size = HIF_MBOX_BLOCK_SIZE; + mbox_info->gmbox_addr = HIF_GMBOX_BASE_ADDR; + mbox_info->gmbox_sz = HIF_GMBOX_WIDTH; +} + +static inline void ath6kl_sdio_set_cmd53_arg(u32 *arg, u8 rw, u8 func, + u8 mode, u8 opcode, u32 addr, + u16 blksz) +{ + *arg = (((rw & 1) << 31) | + ((func & 0x7) << 28) | + ((mode & 1) << 27) | + ((opcode & 1) << 26) | + ((addr & 0x1FFFF) << 9) | + (blksz & 0x1FF)); +} + +static inline void ath6kl_sdio_set_cmd52_arg(u32 *arg, u8 write, u8 raw, + unsigned int address, + unsigned char val) +{ + const u8 func = 0; + + *arg = ((write & 1) << 31) | + ((func & 0x7) << 28) | + ((raw & 1) << 27) | + (1 << 26) | + ((address & 0x1FFFF) << 9) | + (1 << 8) | + (val & 0xFF); +} + +static int ath6kl_sdio_func0_cmd52_wr_byte(struct mmc_card *card, + unsigned int address, + unsigned char byte) +{ + struct mmc_command io_cmd; + + memset(&io_cmd, 0, sizeof(io_cmd)); + ath6kl_sdio_set_cmd52_arg(&io_cmd.arg, 1, 0, address, byte); + io_cmd.opcode = SD_IO_RW_DIRECT; + io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC; + + return mmc_wait_for_cmd(card->host, &io_cmd, 0); +} + +static int ath6kl_sdio_io(struct sdio_func *func, u32 request, u32 addr, + u8 *buf, u32 len) +{ + int ret = 0; + + sdio_claim_host(func); + + if (request & HIF_WRITE) { + /* FIXME: looks like ugly workaround for something */ + if (addr >= HIF_MBOX_BASE_ADDR && + addr <= HIF_MBOX_END_ADDR) + addr += (HIF_MBOX_WIDTH - len); + + /* FIXME: this also looks like ugly workaround */ + if (addr == HIF_MBOX0_EXT_BASE_ADDR) + addr += HIF_MBOX0_EXT_WIDTH - len; + + if (request & HIF_FIXED_ADDRESS) + ret = sdio_writesb(func, addr, buf, len); + else + ret = sdio_memcpy_toio(func, addr, buf, len); + } else { + if (request & HIF_FIXED_ADDRESS) + ret = sdio_readsb(func, buf, addr, len); + else + ret = sdio_memcpy_fromio(func, buf, addr, len); + } + + sdio_release_host(func); + + ath6kl_dbg(ATH6KL_DBG_SDIO, "%s addr 0x%x%s buf 0x%p len %d\n", + request & HIF_WRITE ? "wr" : "rd", addr, + request & HIF_FIXED_ADDRESS ? " (fixed)" : "", buf, len); + ath6kl_dbg_dump(ATH6KL_DBG_SDIO_DUMP, NULL, "sdio ", buf, len); + + trace_ath6kl_sdio(addr, request, buf, len); + + return ret; +} + +static struct bus_request *ath6kl_sdio_alloc_busreq(struct ath6kl_sdio *ar_sdio) +{ + struct bus_request *bus_req; + + spin_lock_bh(&ar_sdio->lock); + + if (list_empty(&ar_sdio->bus_req_freeq)) { + spin_unlock_bh(&ar_sdio->lock); + return NULL; + } + + bus_req = list_first_entry(&ar_sdio->bus_req_freeq, + struct bus_request, list); + list_del(&bus_req->list); + + spin_unlock_bh(&ar_sdio->lock); + ath6kl_dbg(ATH6KL_DBG_SCATTER, "%s: bus request 0x%p\n", + __func__, bus_req); + + return bus_req; +} + +static void ath6kl_sdio_free_bus_req(struct ath6kl_sdio *ar_sdio, + struct bus_request *bus_req) +{ + ath6kl_dbg(ATH6KL_DBG_SCATTER, "%s: bus request 0x%p\n", + __func__, bus_req); + + spin_lock_bh(&ar_sdio->lock); + list_add_tail(&bus_req->list, &ar_sdio->bus_req_freeq); + spin_unlock_bh(&ar_sdio->lock); +} + +static void ath6kl_sdio_setup_scat_data(struct hif_scatter_req *scat_req, + struct mmc_data *data) +{ + struct scatterlist *sg; + int i; + + data->blksz = HIF_MBOX_BLOCK_SIZE; + data->blocks = scat_req->len / HIF_MBOX_BLOCK_SIZE; + + ath6kl_dbg(ATH6KL_DBG_SCATTER, + "hif-scatter: (%s) addr: 0x%X, (block len: %d, block count: %d) , (tot:%d,sg:%d)\n", + (scat_req->req & HIF_WRITE) ? "WR" : "RD", scat_req->addr, + data->blksz, data->blocks, scat_req->len, + scat_req->scat_entries); + + data->flags = (scat_req->req & HIF_WRITE) ? MMC_DATA_WRITE : + MMC_DATA_READ; + + /* fill SG entries */ + sg = scat_req->sgentries; + sg_init_table(sg, scat_req->scat_entries); + + /* assemble SG list */ + for (i = 0; i < scat_req->scat_entries; i++, sg++) { + ath6kl_dbg(ATH6KL_DBG_SCATTER, "%d: addr:0x%p, len:%d\n", + i, scat_req->scat_list[i].buf, + scat_req->scat_list[i].len); + + sg_set_buf(sg, scat_req->scat_list[i].buf, + scat_req->scat_list[i].len); + } + + /* set scatter-gather table for request */ + data->sg = scat_req->sgentries; + data->sg_len = scat_req->scat_entries; +} + +static int ath6kl_sdio_scat_rw(struct ath6kl_sdio *ar_sdio, + struct bus_request *req) +{ + struct mmc_request mmc_req; + struct mmc_command cmd; + struct mmc_data data; + struct hif_scatter_req *scat_req; + u8 opcode, rw; + int status, len; + + scat_req = req->scat_req; + + if (scat_req->virt_scat) { + len = scat_req->len; + if (scat_req->req & HIF_BLOCK_BASIS) + len = round_down(len, HIF_MBOX_BLOCK_SIZE); + + status = ath6kl_sdio_io(ar_sdio->func, scat_req->req, + scat_req->addr, scat_req->virt_dma_buf, + len); + goto scat_complete; + } + + memset(&mmc_req, 0, sizeof(struct mmc_request)); + memset(&cmd, 0, sizeof(struct mmc_command)); + memset(&data, 0, sizeof(struct mmc_data)); + + ath6kl_sdio_setup_scat_data(scat_req, &data); + + opcode = (scat_req->req & HIF_FIXED_ADDRESS) ? + CMD53_ARG_FIXED_ADDRESS : CMD53_ARG_INCR_ADDRESS; + + rw = (scat_req->req & HIF_WRITE) ? CMD53_ARG_WRITE : CMD53_ARG_READ; + + /* Fixup the address so that the last byte will fall on MBOX EOM */ + if (scat_req->req & HIF_WRITE) { + if (scat_req->addr == HIF_MBOX_BASE_ADDR) + scat_req->addr += HIF_MBOX_WIDTH - scat_req->len; + else + /* Uses extended address range */ + scat_req->addr += HIF_MBOX0_EXT_WIDTH - scat_req->len; + } + + /* set command argument */ + ath6kl_sdio_set_cmd53_arg(&cmd.arg, rw, ar_sdio->func->num, + CMD53_ARG_BLOCK_BASIS, opcode, scat_req->addr, + data.blocks); + + cmd.opcode = SD_IO_RW_EXTENDED; + cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC; + + mmc_req.cmd = &cmd; + mmc_req.data = &data; + + sdio_claim_host(ar_sdio->func); + + mmc_set_data_timeout(&data, ar_sdio->func->card); + + trace_ath6kl_sdio_scat(scat_req->addr, + scat_req->req, + scat_req->len, + scat_req->scat_entries, + scat_req->scat_list); + + /* synchronous call to process request */ + mmc_wait_for_req(ar_sdio->func->card->host, &mmc_req); + + sdio_release_host(ar_sdio->func); + + status = cmd.error ? cmd.error : data.error; + +scat_complete: + scat_req->status = status; + + if (scat_req->status) + ath6kl_err("Scatter write request failed:%d\n", + scat_req->status); + + if (scat_req->req & HIF_ASYNCHRONOUS) + scat_req->complete(ar_sdio->ar->htc_target, scat_req); + + return status; +} + +static int ath6kl_sdio_alloc_prep_scat_req(struct ath6kl_sdio *ar_sdio, + int n_scat_entry, int n_scat_req, + bool virt_scat) +{ + struct hif_scatter_req *s_req; + struct bus_request *bus_req; + int i, scat_req_sz, scat_list_sz, sg_sz, buf_sz; + u8 *virt_buf; + + scat_list_sz = (n_scat_entry - 1) * sizeof(struct hif_scatter_item); + scat_req_sz = sizeof(*s_req) + scat_list_sz; + + if (!virt_scat) + sg_sz = sizeof(struct scatterlist) * n_scat_entry; + else + buf_sz = 2 * L1_CACHE_BYTES + + ATH6KL_MAX_TRANSFER_SIZE_PER_SCATTER; + + for (i = 0; i < n_scat_req; i++) { + /* allocate the scatter request */ + s_req = kzalloc(scat_req_sz, GFP_KERNEL); + if (!s_req) + return -ENOMEM; + + if (virt_scat) { + virt_buf = kzalloc(buf_sz, GFP_KERNEL); + if (!virt_buf) { + kfree(s_req); + return -ENOMEM; + } + + s_req->virt_dma_buf = + (u8 *)L1_CACHE_ALIGN((unsigned long)virt_buf); + } else { + /* allocate sglist */ + s_req->sgentries = kzalloc(sg_sz, GFP_KERNEL); + + if (!s_req->sgentries) { + kfree(s_req); + return -ENOMEM; + } + } + + /* allocate a bus request for this scatter request */ + bus_req = ath6kl_sdio_alloc_busreq(ar_sdio); + if (!bus_req) { + kfree(s_req->sgentries); + kfree(s_req->virt_dma_buf); + kfree(s_req); + return -ENOMEM; + } + + /* assign the scatter request to this bus request */ + bus_req->scat_req = s_req; + s_req->busrequest = bus_req; + + s_req->virt_scat = virt_scat; + + /* add it to the scatter pool */ + hif_scatter_req_add(ar_sdio->ar, s_req); + } + + return 0; +} + +static int ath6kl_sdio_read_write_sync(struct ath6kl *ar, u32 addr, u8 *buf, + u32 len, u32 request) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + u8 *tbuf = NULL; + int ret; + bool bounced = false; + + if (request & HIF_BLOCK_BASIS) + len = round_down(len, HIF_MBOX_BLOCK_SIZE); + + if (buf_needs_bounce(buf)) { + if (!ar_sdio->dma_buffer) + return -ENOMEM; + mutex_lock(&ar_sdio->dma_buffer_mutex); + tbuf = ar_sdio->dma_buffer; + + if (request & HIF_WRITE) + memcpy(tbuf, buf, len); + + bounced = true; + } else + tbuf = buf; + + ret = ath6kl_sdio_io(ar_sdio->func, request, addr, tbuf, len); + if ((request & HIF_READ) && bounced) + memcpy(buf, tbuf, len); + + if (bounced) + mutex_unlock(&ar_sdio->dma_buffer_mutex); + + return ret; +} + +static void __ath6kl_sdio_write_async(struct ath6kl_sdio *ar_sdio, + struct bus_request *req) +{ + if (req->scat_req) + ath6kl_sdio_scat_rw(ar_sdio, req); + else { + void *context; + int status; + + status = ath6kl_sdio_read_write_sync(ar_sdio->ar, req->address, + req->buffer, req->length, + req->request); + context = req->packet; + ath6kl_sdio_free_bus_req(ar_sdio, req); + ath6kl_hif_rw_comp_handler(context, status); + } +} + +static void ath6kl_sdio_write_async_work(struct work_struct *work) +{ + struct ath6kl_sdio *ar_sdio; + struct bus_request *req, *tmp_req; + + ar_sdio = container_of(work, struct ath6kl_sdio, wr_async_work); + + spin_lock_bh(&ar_sdio->wr_async_lock); + list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) { + list_del(&req->list); + spin_unlock_bh(&ar_sdio->wr_async_lock); + __ath6kl_sdio_write_async(ar_sdio, req); + spin_lock_bh(&ar_sdio->wr_async_lock); + } + spin_unlock_bh(&ar_sdio->wr_async_lock); +} + +static void ath6kl_sdio_irq_handler(struct sdio_func *func) +{ + int status; + struct ath6kl_sdio *ar_sdio; + + ath6kl_dbg(ATH6KL_DBG_SDIO, "irq\n"); + + ar_sdio = sdio_get_drvdata(func); + atomic_set(&ar_sdio->irq_handling, 1); + /* + * Release the host during interrups so we can pick it back up when + * we process commands. + */ + sdio_release_host(ar_sdio->func); + + status = ath6kl_hif_intr_bh_handler(ar_sdio->ar); + sdio_claim_host(ar_sdio->func); + + atomic_set(&ar_sdio->irq_handling, 0); + wake_up(&ar_sdio->irq_wq); + + WARN_ON(status && status != -ECANCELED); +} + +static int ath6kl_sdio_power_on(struct ath6kl *ar) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + struct sdio_func *func = ar_sdio->func; + int ret = 0; + + if (!ar_sdio->is_disabled) + return 0; + + ath6kl_dbg(ATH6KL_DBG_BOOT, "sdio power on\n"); + + sdio_claim_host(func); + + ret = sdio_enable_func(func); + if (ret) { + ath6kl_err("Unable to enable sdio func: %d)\n", ret); + sdio_release_host(func); + return ret; + } + + sdio_release_host(func); + + /* + * Wait for hardware to initialise. It should take a lot less than + * 10 ms but let's be conservative here. + */ + msleep(10); + + ar_sdio->is_disabled = false; + + return ret; +} + +static int ath6kl_sdio_power_off(struct ath6kl *ar) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + int ret; + + if (ar_sdio->is_disabled) + return 0; + + ath6kl_dbg(ATH6KL_DBG_BOOT, "sdio power off\n"); + + /* Disable the card */ + sdio_claim_host(ar_sdio->func); + ret = sdio_disable_func(ar_sdio->func); + sdio_release_host(ar_sdio->func); + + if (ret) + return ret; + + ar_sdio->is_disabled = true; + + return ret; +} + +static int ath6kl_sdio_write_async(struct ath6kl *ar, u32 address, u8 *buffer, + u32 length, u32 request, + struct htc_packet *packet) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + struct bus_request *bus_req; + + bus_req = ath6kl_sdio_alloc_busreq(ar_sdio); + + if (WARN_ON_ONCE(!bus_req)) + return -ENOMEM; + + bus_req->address = address; + bus_req->buffer = buffer; + bus_req->length = length; + bus_req->request = request; + bus_req->packet = packet; + + spin_lock_bh(&ar_sdio->wr_async_lock); + list_add_tail(&bus_req->list, &ar_sdio->wr_asyncq); + spin_unlock_bh(&ar_sdio->wr_async_lock); + queue_work(ar->ath6kl_wq, &ar_sdio->wr_async_work); + + return 0; +} + +static void ath6kl_sdio_irq_enable(struct ath6kl *ar) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + int ret; + + sdio_claim_host(ar_sdio->func); + + /* Register the isr */ + ret = sdio_claim_irq(ar_sdio->func, ath6kl_sdio_irq_handler); + if (ret) + ath6kl_err("Failed to claim sdio irq: %d\n", ret); + + sdio_release_host(ar_sdio->func); +} + +static bool ath6kl_sdio_is_on_irq(struct ath6kl *ar) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + + return !atomic_read(&ar_sdio->irq_handling); +} + +static void ath6kl_sdio_irq_disable(struct ath6kl *ar) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + int ret; + + sdio_claim_host(ar_sdio->func); + + if (atomic_read(&ar_sdio->irq_handling)) { + sdio_release_host(ar_sdio->func); + + ret = wait_event_interruptible(ar_sdio->irq_wq, + ath6kl_sdio_is_on_irq(ar)); + if (ret) + return; + + sdio_claim_host(ar_sdio->func); + } + + ret = sdio_release_irq(ar_sdio->func); + if (ret) + ath6kl_err("Failed to release sdio irq: %d\n", ret); + + sdio_release_host(ar_sdio->func); +} + +static struct hif_scatter_req *ath6kl_sdio_scatter_req_get(struct ath6kl *ar) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + struct hif_scatter_req *node = NULL; + + spin_lock_bh(&ar_sdio->scat_lock); + + if (!list_empty(&ar_sdio->scat_req)) { + node = list_first_entry(&ar_sdio->scat_req, + struct hif_scatter_req, list); + list_del(&node->list); + + node->scat_q_depth = get_queue_depth(&ar_sdio->scat_req); + } + + spin_unlock_bh(&ar_sdio->scat_lock); + + return node; +} + +static void ath6kl_sdio_scatter_req_add(struct ath6kl *ar, + struct hif_scatter_req *s_req) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + + spin_lock_bh(&ar_sdio->scat_lock); + + list_add_tail(&s_req->list, &ar_sdio->scat_req); + + spin_unlock_bh(&ar_sdio->scat_lock); + +} + +/* scatter gather read write request */ +static int ath6kl_sdio_async_rw_scatter(struct ath6kl *ar, + struct hif_scatter_req *scat_req) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + u32 request = scat_req->req; + int status = 0; + + if (!scat_req->len) + return -EINVAL; + + ath6kl_dbg(ATH6KL_DBG_SCATTER, + "hif-scatter: total len: %d scatter entries: %d\n", + scat_req->len, scat_req->scat_entries); + + if (request & HIF_SYNCHRONOUS) + status = ath6kl_sdio_scat_rw(ar_sdio, scat_req->busrequest); + else { + spin_lock_bh(&ar_sdio->wr_async_lock); + list_add_tail(&scat_req->busrequest->list, &ar_sdio->wr_asyncq); + spin_unlock_bh(&ar_sdio->wr_async_lock); + queue_work(ar->ath6kl_wq, &ar_sdio->wr_async_work); + } + + return status; +} + +/* clean up scatter support */ +static void ath6kl_sdio_cleanup_scatter(struct ath6kl *ar) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + struct hif_scatter_req *s_req, *tmp_req; + + /* empty the free list */ + spin_lock_bh(&ar_sdio->scat_lock); + list_for_each_entry_safe(s_req, tmp_req, &ar_sdio->scat_req, list) { + list_del(&s_req->list); + spin_unlock_bh(&ar_sdio->scat_lock); + + /* + * FIXME: should we also call completion handler with + * ath6kl_hif_rw_comp_handler() with status -ECANCELED so + * that the packet is properly freed? + */ + if (s_req->busrequest) + ath6kl_sdio_free_bus_req(ar_sdio, s_req->busrequest); + kfree(s_req->virt_dma_buf); + kfree(s_req->sgentries); + kfree(s_req); + + spin_lock_bh(&ar_sdio->scat_lock); + } + spin_unlock_bh(&ar_sdio->scat_lock); +} + +/* setup of HIF scatter resources */ +static int ath6kl_sdio_enable_scatter(struct ath6kl *ar) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + struct htc_target *target = ar->htc_target; + int ret = 0; + bool virt_scat = false; + + if (ar_sdio->scatter_enabled) + return 0; + + ar_sdio->scatter_enabled = true; + + /* check if host supports scatter and it meets our requirements */ + if (ar_sdio->func->card->host->max_segs < MAX_SCATTER_ENTRIES_PER_REQ) { + ath6kl_err("host only supports scatter of :%d entries, need: %d\n", + ar_sdio->func->card->host->max_segs, + MAX_SCATTER_ENTRIES_PER_REQ); + virt_scat = true; + } + + if (!virt_scat) { + ret = ath6kl_sdio_alloc_prep_scat_req(ar_sdio, + MAX_SCATTER_ENTRIES_PER_REQ, + MAX_SCATTER_REQUESTS, virt_scat); + + if (!ret) { + ath6kl_dbg(ATH6KL_DBG_BOOT, + "hif-scatter enabled requests %d entries %d\n", + MAX_SCATTER_REQUESTS, + MAX_SCATTER_ENTRIES_PER_REQ); + + target->max_scat_entries = MAX_SCATTER_ENTRIES_PER_REQ; + target->max_xfer_szper_scatreq = + MAX_SCATTER_REQ_TRANSFER_SIZE; + } else { + ath6kl_sdio_cleanup_scatter(ar); + ath6kl_warn("hif scatter resource setup failed, trying virtual scatter method\n"); + } + } + + if (virt_scat || ret) { + ret = ath6kl_sdio_alloc_prep_scat_req(ar_sdio, + ATH6KL_SCATTER_ENTRIES_PER_REQ, + ATH6KL_SCATTER_REQS, virt_scat); + + if (ret) { + ath6kl_err("failed to alloc virtual scatter resources !\n"); + ath6kl_sdio_cleanup_scatter(ar); + return ret; + } + + ath6kl_dbg(ATH6KL_DBG_BOOT, + "virtual scatter enabled requests %d entries %d\n", + ATH6KL_SCATTER_REQS, ATH6KL_SCATTER_ENTRIES_PER_REQ); + + target->max_scat_entries = ATH6KL_SCATTER_ENTRIES_PER_REQ; + target->max_xfer_szper_scatreq = + ATH6KL_MAX_TRANSFER_SIZE_PER_SCATTER; + } + + return 0; +} + +static int ath6kl_sdio_config(struct ath6kl *ar) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + struct sdio_func *func = ar_sdio->func; + int ret; + + sdio_claim_host(func); + + if ((ar_sdio->id->device & MANUFACTURER_ID_ATH6KL_BASE_MASK) >= + MANUFACTURER_ID_AR6003_BASE) { + /* enable 4-bit ASYNC interrupt on AR6003 or later */ + ret = ath6kl_sdio_func0_cmd52_wr_byte(func->card, + CCCR_SDIO_IRQ_MODE_REG, + SDIO_IRQ_MODE_ASYNC_4BIT_IRQ); + if (ret) { + ath6kl_err("Failed to enable 4-bit async irq mode %d\n", + ret); + goto out; + } + + ath6kl_dbg(ATH6KL_DBG_BOOT, "4-bit async irq mode enabled\n"); + } + + /* give us some time to enable, in ms */ + func->enable_timeout = 100; + + ret = sdio_set_block_size(func, HIF_MBOX_BLOCK_SIZE); + if (ret) { + ath6kl_err("Set sdio block size %d failed: %d)\n", + HIF_MBOX_BLOCK_SIZE, ret); + goto out; + } + +out: + sdio_release_host(func); + + return ret; +} + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34)) +static int ath6kl_set_sdio_pm_caps(struct ath6kl *ar) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + struct sdio_func *func = ar_sdio->func; + mmc_pm_flag_t flags; + int ret; + + flags = sdio_get_host_pm_caps(func); + + ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio suspend pm_caps 0x%x\n", flags); + + if (!(flags & MMC_PM_WAKE_SDIO_IRQ) || + !(flags & MMC_PM_KEEP_POWER)) + return -EINVAL; + + ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); + if (ret) { + ath6kl_err("set sdio keep pwr flag failed: %d\n", ret); + return ret; + } + + /* sdio irq wakes up host */ + ret = sdio_set_host_pm_flags(func, MMC_PM_WAKE_SDIO_IRQ); + if (ret) + ath6kl_err("set sdio wake irq flag failed: %d\n", ret); + + return ret; +} + +static int ath6kl_sdio_suspend(struct ath6kl *ar, struct cfg80211_wowlan *wow) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + struct sdio_func *func = ar_sdio->func; + mmc_pm_flag_t flags; + bool try_deepsleep = false; + int ret; + + if (ar->suspend_mode == WLAN_POWER_STATE_WOW || + (!ar->suspend_mode && wow)) { + + ret = ath6kl_set_sdio_pm_caps(ar); + if (ret) + goto cut_pwr; + + ret = ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_WOW, wow); + if (ret && ret != -ENOTCONN) + ath6kl_err("wow suspend failed: %d\n", ret); + + if (ret && + (!ar->wow_suspend_mode || + ar->wow_suspend_mode == WLAN_POWER_STATE_DEEP_SLEEP)) + try_deepsleep = true; + else if (ret && + ar->wow_suspend_mode == WLAN_POWER_STATE_CUT_PWR) + goto cut_pwr; + if (!ret) + return 0; + } + + if (ar->suspend_mode == WLAN_POWER_STATE_DEEP_SLEEP || + !ar->suspend_mode || try_deepsleep) { + + flags = sdio_get_host_pm_caps(func); + if (!(flags & MMC_PM_KEEP_POWER)) + goto cut_pwr; + + ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); + if (ret) + goto cut_pwr; + + /* + * Workaround to support Deep Sleep with MSM, set the host pm + * flag as MMC_PM_WAKE_SDIO_IRQ to allow SDCC deiver to disable + * the sdc2_clock and internally allows MSM to enter + * TCXO shutdown properly. + */ + if ((flags & MMC_PM_WAKE_SDIO_IRQ)) { + ret = sdio_set_host_pm_flags(func, + MMC_PM_WAKE_SDIO_IRQ); + if (ret) + goto cut_pwr; + } + + ret = ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_DEEPSLEEP, + NULL); + if (ret) + goto cut_pwr; + + return 0; + } + +cut_pwr: + if (func->card && func->card->host) + func->card->host->pm_flags &= ~MMC_PM_KEEP_POWER; + + return ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_CUTPOWER, NULL); +} + +static int ath6kl_sdio_resume(struct ath6kl *ar) +{ + switch (ar->state) { + case ATH6KL_STATE_OFF: + case ATH6KL_STATE_CUTPOWER: + ath6kl_dbg(ATH6KL_DBG_SUSPEND, + "sdio resume configuring sdio\n"); + + /* need to set sdio settings after power is cut from sdio */ + ath6kl_sdio_config(ar); + break; + + case ATH6KL_STATE_ON: + break; + + case ATH6KL_STATE_DEEPSLEEP: + break; + + case ATH6KL_STATE_WOW: + break; + + case ATH6KL_STATE_SUSPENDING: + break; + + case ATH6KL_STATE_RESUMING: + break; + + case ATH6KL_STATE_RECOVERY: + break; + } + + ath6kl_cfg80211_resume(ar); + + return 0; +} +#else +static int ath6kl_sdio_suspend(struct ath6kl *ar, struct cfg80211_wowlan *wow) +{ + return 0; +} + +static int ath6kl_sdio_resume(struct ath6kl *ar) +{ + return 0; +} +#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34)) */ + +/* set the window address register (using 4-byte register access ). */ +static int ath6kl_set_addrwin_reg(struct ath6kl *ar, u32 reg_addr, u32 addr) +{ + int status; + u8 addr_val[4]; + s32 i; + + /* + * Write bytes 1,2,3 of the register to set the upper address bytes, + * the LSB is written last to initiate the access cycle + */ + + for (i = 1; i <= 3; i++) { + /* + * Fill the buffer with the address byte value we want to + * hit 4 times. + */ + memset(addr_val, ((u8 *)&addr)[i], 4); + + /* + * Hit each byte of the register address with a 4-byte + * write operation to the same address, this is a harmless + * operation. + */ + status = ath6kl_sdio_read_write_sync(ar, reg_addr + i, addr_val, + 4, HIF_WR_SYNC_BYTE_FIX); + if (status) + break; + } + + if (status) { + ath6kl_err("%s: failed to write initial bytes of 0x%x to window reg: 0x%X\n", + __func__, addr, reg_addr); + return status; + } + + /* + * Write the address register again, this time write the whole + * 4-byte value. The effect here is that the LSB write causes the + * cycle to start, the extra 3 byte write to bytes 1,2,3 has no + * effect since we are writing the same values again + */ + status = ath6kl_sdio_read_write_sync(ar, reg_addr, (u8 *)(&addr), + 4, HIF_WR_SYNC_BYTE_INC); + + if (status) { + ath6kl_err("%s: failed to write 0x%x to window reg: 0x%X\n", + __func__, addr, reg_addr); + return status; + } + + return 0; +} + +static int ath6kl_sdio_diag_read32(struct ath6kl *ar, u32 address, u32 *data) +{ + int status; + + /* set window register to start read cycle */ + status = ath6kl_set_addrwin_reg(ar, WINDOW_READ_ADDR_ADDRESS, + address); + + if (status) + return status; + + /* read the data */ + status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS, + (u8 *)data, sizeof(u32), HIF_RD_SYNC_BYTE_INC); + if (status) { + ath6kl_err("%s: failed to read from window data addr\n", + __func__); + return status; + } + + return status; +} + +static int ath6kl_sdio_diag_write32(struct ath6kl *ar, u32 address, + __le32 data) +{ + int status; + u32 val = (__force u32) data; + + /* set write data */ + status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS, + (u8 *) &val, sizeof(u32), HIF_WR_SYNC_BYTE_INC); + if (status) { + ath6kl_err("%s: failed to write 0x%x to window data addr\n", + __func__, data); + return status; + } + + /* set window register, which starts the write cycle */ + return ath6kl_set_addrwin_reg(ar, WINDOW_WRITE_ADDR_ADDRESS, + address); +} + +static int ath6kl_sdio_bmi_credits(struct ath6kl *ar) +{ + u32 addr; + unsigned long timeout; + int ret; + + ar->bmi.cmd_credits = 0; + + /* Read the counter register to get the command credits */ + addr = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4; + + timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT); + while (time_before(jiffies, timeout) && !ar->bmi.cmd_credits) { + + /* + * Hit the credit counter with a 4-byte access, the first byte + * read will hit the counter and cause a decrement, while the + * remaining 3 bytes has no effect. The rationale behind this + * is to make all HIF accesses 4-byte aligned. + */ + ret = ath6kl_sdio_read_write_sync(ar, addr, + (u8 *)&ar->bmi.cmd_credits, 4, + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath6kl_err("Unable to decrement the command credit count register: %d\n", + ret); + return ret; + } + + /* The counter is only 8 bits. + * Ignore anything in the upper 3 bytes + */ + ar->bmi.cmd_credits &= 0xFF; + } + + if (!ar->bmi.cmd_credits) { + ath6kl_err("bmi communication timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int ath6kl_bmi_get_rx_lkahd(struct ath6kl *ar) +{ + unsigned long timeout; + u32 rx_word = 0; + int ret = 0; + + timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT); + while ((time_before(jiffies, timeout)) && !rx_word) { + ret = ath6kl_sdio_read_write_sync(ar, + RX_LOOKAHEAD_VALID_ADDRESS, + (u8 *)&rx_word, sizeof(rx_word), + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath6kl_err("unable to read RX_LOOKAHEAD_VALID\n"); + return ret; + } + + /* all we really want is one bit */ + rx_word &= (1 << ENDPOINT1); + } + + if (!rx_word) { + ath6kl_err("bmi_recv_buf FIFO empty\n"); + return -EINVAL; + } + + return ret; +} + +static int ath6kl_sdio_bmi_write(struct ath6kl *ar, u8 *buf, u32 len) +{ + int ret; + u32 addr; + + ret = ath6kl_sdio_bmi_credits(ar); + if (ret) + return ret; + + addr = ar->mbox_info.htc_addr; + + ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len, + HIF_WR_SYNC_BYTE_INC); + if (ret) { + ath6kl_err("unable to send the bmi data to the device\n"); + return ret; + } + + return 0; +} + +static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len) +{ + int ret; + u32 addr; + + /* + * During normal bootup, small reads may be required. + * Rather than issue an HIF Read and then wait as the Target + * adds successive bytes to the FIFO, we wait here until + * we know that response data is available. + * + * This allows us to cleanly timeout on an unexpected + * Target failure rather than risk problems at the HIF level. + * In particular, this avoids SDIO timeouts and possibly garbage + * data on some host controllers. And on an interconnect + * such as Compact Flash (as well as some SDIO masters) which + * does not provide any indication on data timeout, it avoids + * a potential hang or garbage response. + * + * Synchronization is more difficult for reads larger than the + * size of the MBOX FIFO (128B), because the Target is unable + * to push the 129th byte of data until AFTER the Host posts an + * HIF Read and removes some FIFO data. So for large reads the + * Host proceeds to post an HIF Read BEFORE all the data is + * actually available to read. Fortunately, large BMI reads do + * not occur in practice -- they're supported for debug/development. + * + * So Host/Target BMI synchronization is divided into these cases: + * CASE 1: length < 4 + * Should not happen + * + * CASE 2: 4 <= length <= 128 + * Wait for first 4 bytes to be in FIFO + * If CONSERVATIVE_BMI_READ is enabled, also wait for + * a BMI command credit, which indicates that the ENTIRE + * response is available in the the FIFO + * + * CASE 3: length > 128 + * Wait for the first 4 bytes to be in FIFO + * + * For most uses, a small timeout should be sufficient and we will + * usually see a response quickly; but there may be some unusual + * (debug) cases of BMI_EXECUTE where we want an larger timeout. + * For now, we use an unbounded busy loop while waiting for + * BMI_EXECUTE. + * + * If BMI_EXECUTE ever needs to support longer-latency execution, + * especially in production, this code needs to be enhanced to sleep + * and yield. Also note that BMI_COMMUNICATION_TIMEOUT is currently + * a function of Host processor speed. + */ + if (len >= 4) { /* NB: Currently, always true */ + ret = ath6kl_bmi_get_rx_lkahd(ar); + if (ret) + return ret; + } + + addr = ar->mbox_info.htc_addr; + ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len, + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath6kl_err("Unable to read the bmi data from the device: %d\n", + ret); + return ret; + } + + return 0; +} + +static void ath6kl_sdio_stop(struct ath6kl *ar) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + struct bus_request *req, *tmp_req; + void *context; + + /* FIXME: make sure that wq is not queued again */ + + cancel_work_sync(&ar_sdio->wr_async_work); + + spin_lock_bh(&ar_sdio->wr_async_lock); + + list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) { + list_del(&req->list); + + if (req->scat_req) { + /* this is a scatter gather request */ + req->scat_req->status = -ECANCELED; + req->scat_req->complete(ar_sdio->ar->htc_target, + req->scat_req); + } else { + context = req->packet; + ath6kl_sdio_free_bus_req(ar_sdio, req); + ath6kl_hif_rw_comp_handler(context, -ECANCELED); + } + } + + spin_unlock_bh(&ar_sdio->wr_async_lock); + + WARN_ON(get_queue_depth(&ar_sdio->scat_req) != 4); +} + +static const struct ath6kl_hif_ops ath6kl_sdio_ops = { + .read_write_sync = ath6kl_sdio_read_write_sync, + .write_async = ath6kl_sdio_write_async, + .irq_enable = ath6kl_sdio_irq_enable, + .irq_disable = ath6kl_sdio_irq_disable, + .scatter_req_get = ath6kl_sdio_scatter_req_get, + .scatter_req_add = ath6kl_sdio_scatter_req_add, + .enable_scatter = ath6kl_sdio_enable_scatter, + .scat_req_rw = ath6kl_sdio_async_rw_scatter, + .cleanup_scatter = ath6kl_sdio_cleanup_scatter, + .suspend = ath6kl_sdio_suspend, + .resume = ath6kl_sdio_resume, + .diag_read32 = ath6kl_sdio_diag_read32, + .diag_write32 = ath6kl_sdio_diag_write32, + .bmi_read = ath6kl_sdio_bmi_read, + .bmi_write = ath6kl_sdio_bmi_write, + .power_on = ath6kl_sdio_power_on, + .power_off = ath6kl_sdio_power_off, + .stop = ath6kl_sdio_stop, +}; + +#if defined(CONFIG_PM_SLEEP) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34)) + +/* + * Empty handlers so that mmc subsystem doesn't remove us entirely during + * suspend. We instead follow cfg80211 suspend/resume handlers. + */ +static int ath6kl_sdio_pm_suspend(struct device *device) +{ + ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio pm suspend\n"); + + return 0; +} + +static int ath6kl_sdio_pm_resume(struct device *device) +{ + ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio pm resume\n"); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(ath6kl_sdio_pm_ops, ath6kl_sdio_pm_suspend, + ath6kl_sdio_pm_resume); + +#define ATH6KL_SDIO_PM_OPS (&ath6kl_sdio_pm_ops) + +#else + +#define ATH6KL_SDIO_PM_OPS NULL + +#endif /* CONFIG_PM_SLEEP */ + +static int ath6kl_sdio_probe(struct sdio_func *func, + const struct sdio_device_id *id) +{ + int ret; + struct ath6kl_sdio *ar_sdio; + struct ath6kl *ar; + int count; + + ath6kl_dbg(ATH6KL_DBG_BOOT, + "sdio new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n", + func->num, func->vendor, func->device, + func->max_blksize, func->cur_blksize); + + ar_sdio = kzalloc(sizeof(struct ath6kl_sdio), GFP_KERNEL); + if (!ar_sdio) + return -ENOMEM; + + ar_sdio->dma_buffer = kzalloc(HIF_DMA_BUFFER_SIZE, GFP_KERNEL); + if (!ar_sdio->dma_buffer) { + ret = -ENOMEM; + goto err_hif; + } + + ar_sdio->func = func; + sdio_set_drvdata(func, ar_sdio); + + ar_sdio->id = id; + ar_sdio->is_disabled = true; + + spin_lock_init(&ar_sdio->lock); + spin_lock_init(&ar_sdio->scat_lock); + spin_lock_init(&ar_sdio->wr_async_lock); + mutex_init(&ar_sdio->dma_buffer_mutex); + + INIT_LIST_HEAD(&ar_sdio->scat_req); + INIT_LIST_HEAD(&ar_sdio->bus_req_freeq); + INIT_LIST_HEAD(&ar_sdio->wr_asyncq); + + INIT_WORK(&ar_sdio->wr_async_work, ath6kl_sdio_write_async_work); + + init_waitqueue_head(&ar_sdio->irq_wq); + + for (count = 0; count < BUS_REQUEST_MAX_NUM; count++) + ath6kl_sdio_free_bus_req(ar_sdio, &ar_sdio->bus_req[count]); + + ar = ath6kl_core_create(&ar_sdio->func->dev); + if (!ar) { + ath6kl_err("Failed to alloc ath6kl core\n"); + ret = -ENOMEM; + goto err_dma; + } + + ar_sdio->ar = ar; + ar->hif_type = ATH6KL_HIF_TYPE_SDIO; + ar->hif_priv = ar_sdio; + ar->hif_ops = &ath6kl_sdio_ops; + ar->bmi.max_data_size = 256; + + ath6kl_sdio_set_mbox_info(ar); + + ret = ath6kl_sdio_config(ar); + if (ret) { + ath6kl_err("Failed to config sdio: %d\n", ret); + goto err_core_alloc; + } + + ret = ath6kl_core_init(ar, ATH6KL_HTC_TYPE_MBOX); + if (ret) { + ath6kl_err("Failed to init ath6kl core\n"); + goto err_core_alloc; + } + + return ret; + +err_core_alloc: + ath6kl_core_destroy(ar_sdio->ar); +err_dma: + kfree(ar_sdio->dma_buffer); +err_hif: + kfree(ar_sdio); + + return ret; +} + +static void ath6kl_sdio_remove(struct sdio_func *func) +{ + struct ath6kl_sdio *ar_sdio; + + ath6kl_dbg(ATH6KL_DBG_BOOT, + "sdio removed func %d vendor 0x%x device 0x%x\n", + func->num, func->vendor, func->device); + + ar_sdio = sdio_get_drvdata(func); + + ath6kl_stop_txrx(ar_sdio->ar); + cancel_work_sync(&ar_sdio->wr_async_work); + + ath6kl_core_cleanup(ar_sdio->ar); + ath6kl_core_destroy(ar_sdio->ar); + + kfree(ar_sdio->dma_buffer); + kfree(ar_sdio); +} + +static const struct sdio_device_id ath6kl_sdio_devices[] = { + {SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6003_BASE | 0x0))}, + {SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6003_BASE | 0x1))}, + {SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6004_BASE | 0x0))}, + {SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6004_BASE | 0x1))}, + {}, +}; + +MODULE_DEVICE_TABLE(sdio, ath6kl_sdio_devices); + +static struct sdio_driver ath6kl_sdio_driver = { + .name = "ath6kl_sdio", + .id_table = ath6kl_sdio_devices, + .probe = ath6kl_sdio_probe, + .remove = ath6kl_sdio_remove, +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34)) + .drv.pm = ATH6KL_SDIO_PM_OPS, +#endif +}; + +static int __init ath6kl_sdio_init(void) +{ + int ret; + + ret = sdio_register_driver(&ath6kl_sdio_driver); + if (ret) + ath6kl_err("sdio driver registration failed: %d\n", ret); + + return ret; +} + +static void __exit ath6kl_sdio_exit(void) +{ + sdio_unregister_driver(&ath6kl_sdio_driver); +} + +module_init(ath6kl_sdio_init); +module_exit(ath6kl_sdio_exit); + +MODULE_AUTHOR("Atheros Communications, Inc."); +MODULE_DESCRIPTION("Driver support for Atheros AR600x SDIO devices"); +MODULE_LICENSE("Dual BSD/GPL"); + +MODULE_FIRMWARE(AR6003_HW_2_0_FW_DIR "/" AR6003_HW_2_0_OTP_FILE); +MODULE_FIRMWARE(AR6003_HW_2_0_FW_DIR "/" AR6003_HW_2_0_FIRMWARE_FILE); +MODULE_FIRMWARE(AR6003_HW_2_0_FW_DIR "/" AR6003_HW_2_0_PATCH_FILE); +MODULE_FIRMWARE(AR6003_HW_2_0_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6003_HW_2_0_DEFAULT_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6003_HW_2_1_1_FW_DIR "/" AR6003_HW_2_1_1_OTP_FILE); +MODULE_FIRMWARE(AR6003_HW_2_1_1_FW_DIR "/" AR6003_HW_2_1_1_FIRMWARE_FILE); +MODULE_FIRMWARE(AR6003_HW_2_1_1_FW_DIR "/" AR6003_HW_2_1_1_PATCH_FILE); +MODULE_FIRMWARE(AR6003_HW_2_1_1_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6003_HW_2_1_1_DEFAULT_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6004_HW_1_0_FW_DIR "/" AR6004_HW_1_0_FIRMWARE_FILE); +MODULE_FIRMWARE(AR6004_HW_1_0_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6004_HW_1_0_DEFAULT_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6004_HW_1_1_FW_DIR "/" AR6004_HW_1_1_FIRMWARE_FILE); +MODULE_FIRMWARE(AR6004_HW_1_1_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6004_HW_1_1_DEFAULT_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6004_HW_1_2_FW_DIR "/" AR6004_HW_1_2_FIRMWARE_FILE); +MODULE_FIRMWARE(AR6004_HW_1_2_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6004_HW_1_2_DEFAULT_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6004_HW_1_3_FW_DIR "/" AR6004_HW_1_3_FIRMWARE_FILE); +MODULE_FIRMWARE(AR6004_HW_1_3_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6004_HW_1_3_DEFAULT_BOARD_DATA_FILE); -- cgit v1.2.3