From ddd86436f4e3643c04b797f858dab95d5f2e4de9 Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 15:00:15 +0000 Subject: fish --- drivers/media/usb/dvb-usb/opera1.c | 583 +++++++++++++++++++++++++++++++++++++ 1 file changed, 583 insertions(+) create mode 100644 drivers/media/usb/dvb-usb/opera1.c (limited to 'drivers/media/usb/dvb-usb/opera1.c') diff --git a/drivers/media/usb/dvb-usb/opera1.c b/drivers/media/usb/dvb-usb/opera1.c new file mode 100644 index 0000000..16ba90a --- /dev/null +++ b/drivers/media/usb/dvb-usb/opera1.c @@ -0,0 +1,583 @@ +/* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card +* +* Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org) +* Copyright (C) 2006 Marco Gittler (g.marco@freenet.de) +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the Free +* Software Foundation, version 2. +* +* see Documentation/dvb/README.dvb-usb for more information +*/ + +#define DVB_USB_LOG_PREFIX "opera" + +#include "dvb-usb.h" +#include "stv0299.h" + +#define OPERA_READ_MSG 0 +#define OPERA_WRITE_MSG 1 +#define OPERA_I2C_TUNER 0xd1 + +#define READ_FX2_REG_REQ 0xba +#define READ_MAC_ADDR 0x08 +#define OPERA_WRITE_FX2 0xbb +#define OPERA_TUNER_REQ 0xb1 +#define REG_1F_SYMBOLRATE_BYTE0 0x1f +#define REG_20_SYMBOLRATE_BYTE1 0x20 +#define REG_21_SYMBOLRATE_BYTE2 0x21 + +#define ADDR_B600_VOLTAGE_13V (0x02) +#define ADDR_B601_VOLTAGE_18V (0x03) +#define ADDR_B1A6_STREAM_CTRL (0x04) +#define ADDR_B880_READ_REMOTE (0x05) + +struct opera1_state { + u32 last_key_pressed; +}; +struct rc_map_opera_table { + u32 keycode; + u32 event; +}; + +static int dvb_usb_opera1_debug; +module_param_named(debug, dvb_usb_opera1_debug, int, 0644); +MODULE_PARM_DESC(debug, + "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))." + DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + + +static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value, + u8 * data, u16 len, int flags) +{ + int ret; + u8 tmp; + u8 *buf; + unsigned int pipe = (flags == OPERA_READ_MSG) ? + usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0); + u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; + + buf = kmalloc(len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + if (flags == OPERA_WRITE_MSG) + memcpy(buf, data, len); + ret = usb_control_msg(dev, pipe, request, + request_type | USB_TYPE_VENDOR, value, 0x0, + buf, len, 2000); + + if (request == OPERA_TUNER_REQ) { + tmp = buf[0]; + if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR, + 0x01, 0x0, buf, 1, 2000) < 1 || buf[0] != 0x08) { + ret = 0; + goto out; + } + buf[0] = tmp; + } + if (flags == OPERA_READ_MSG) + memcpy(data, buf, len); +out: + kfree(buf); + return ret; +} + +/* I2C */ + +static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr, + u8 * buf, u16 len) +{ + int ret = 0; + u8 request; + u16 value; + + if (!dev) { + info("no usb_device"); + return -EINVAL; + } + if (mutex_lock_interruptible(&dev->usb_mutex) < 0) + return -EAGAIN; + + switch (addr>>1){ + case ADDR_B600_VOLTAGE_13V: + request=0xb6; + value=0x00; + break; + case ADDR_B601_VOLTAGE_18V: + request=0xb6; + value=0x01; + break; + case ADDR_B1A6_STREAM_CTRL: + request=0xb1; + value=0xa6; + break; + case ADDR_B880_READ_REMOTE: + request=0xb8; + value=0x80; + break; + default: + request=0xb1; + value=addr; + } + ret = opera1_xilinx_rw(dev->udev, request, + value, buf, len, + addr&0x01?OPERA_READ_MSG:OPERA_WRITE_MSG); + + mutex_unlock(&dev->usb_mutex); + return ret; +} + +static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i = 0, tmp = 0; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + if ((tmp = opera1_usb_i2c_msgxfer(d, + (msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0), + msg[i].buf, + msg[i].len + )) != msg[i].len) { + break; + } + if (dvb_usb_opera1_debug & 0x10) + info("sending i2c message %d %d", tmp, msg[i].len); + } + mutex_unlock(&d->i2c_mutex); + return num; +} + +static u32 opera1_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm opera1_i2c_algo = { + .master_xfer = opera1_i2c_xfer, + .functionality = opera1_i2c_func, +}; + +static int opera1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + static u8 command_13v[1]={0x00}; + static u8 command_18v[1]={0x01}; + struct i2c_msg msg[] = { + {.addr = ADDR_B600_VOLTAGE_13V,.flags = 0,.buf = command_13v,.len = 1}, + }; + struct dvb_usb_adapter *udev_adap = + (struct dvb_usb_adapter *)(fe->dvb->priv); + if (voltage == SEC_VOLTAGE_18) { + msg[0].addr = ADDR_B601_VOLTAGE_18V; + msg[0].buf = command_18v; + } + i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1); + return 0; +} + +static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate, + u32 ratio) +{ + stv0299_writereg(fe, 0x13, 0x98); + stv0299_writereg(fe, 0x14, 0x95); + stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff); + stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff); + stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0); + return 0; + +} +static u8 opera1_inittab[] = { + 0x00, 0xa1, + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, + 0x05, 0x05, + 0x06, 0x02, + 0x07, 0x00, + 0x0b, 0x00, + 0x0c, 0x01, + 0x0d, 0x81, + 0x0e, 0x44, + 0x0f, 0x19, + 0x10, 0x3f, + 0x11, 0x84, + 0x12, 0xda, + 0x13, 0x98, + 0x14, 0x95, + 0x15, 0xc9, + 0x16, 0xeb, + 0x17, 0x00, + 0x18, 0x19, + 0x19, 0x8b, + 0x1a, 0x00, + 0x1b, 0x82, + 0x1c, 0x7f, + 0x1d, 0x00, + 0x1e, 0x00, + REG_1F_SYMBOLRATE_BYTE0, 0x06, + REG_20_SYMBOLRATE_BYTE1, 0x50, + REG_21_SYMBOLRATE_BYTE2, 0x10, + 0x22, 0x00, + 0x23, 0x00, + 0x24, 0x37, + 0x25, 0xbc, + 0x26, 0x00, + 0x27, 0x00, + 0x28, 0x00, + 0x29, 0x1e, + 0x2a, 0x14, + 0x2b, 0x1f, + 0x2c, 0x09, + 0x2d, 0x0a, + 0x2e, 0x00, + 0x2f, 0x00, + 0x30, 0x00, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x13, + 0xff, 0xff, +}; + +static struct stv0299_config opera1_stv0299_config = { + .demod_address = 0xd0>>1, + .min_delay_ms = 100, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_0, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .inittab = opera1_inittab, + .set_symbol_rate = opera1_stv0299_set_symbol_rate, +}; + +static int opera1_frontend_attach(struct dvb_usb_adapter *d) +{ + d->fe_adap[0].fe = dvb_attach(stv0299_attach, &opera1_stv0299_config, + &d->dev->i2c_adap); + if ((d->fe_adap[0].fe) != NULL) { + d->fe_adap[0].fe->ops.set_voltage = opera1_set_voltage; + return 0; + } + info("not attached stv0299"); + return -EIO; +} + +static int opera1_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach( + dvb_pll_attach, adap->fe_adap[0].fe, 0xc0>>1, + &adap->dev->i2c_adap, DVB_PLL_OPERA1 + ); + return 0; +} + +static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 val = onoff ? 0x01 : 0x00; + + if (dvb_usb_opera1_debug) + info("power %s", onoff ? "on" : "off"); + return opera1_xilinx_rw(d->udev, 0xb7, val, + &val, 1, OPERA_WRITE_MSG); +} + +static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + static u8 buf_start[2] = { 0xff, 0x03 }; + static u8 buf_stop[2] = { 0xff, 0x00 }; + struct i2c_msg start_tuner[] = { + {.addr = ADDR_B1A6_STREAM_CTRL,.buf = onoff ? buf_start : buf_stop,.len = 2}, + }; + if (dvb_usb_opera1_debug) + info("streaming %s", onoff ? "on" : "off"); + i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1); + return 0; +} + +static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, + int onoff) +{ + u8 b_pid[3]; + struct i2c_msg msg[] = { + {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3}, + }; + if (dvb_usb_opera1_debug) + info("pidfilter index: %d pid: %d %s", index, pid, + onoff ? "on" : "off"); + b_pid[0] = (2 * index) + 4; + b_pid[1] = onoff ? (pid & 0xff) : (0x00); + b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00); + i2c_transfer(&adap->dev->i2c_adap, msg, 1); + return 0; +} + +static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff) +{ + int u = 0x04; + u8 b_pid[3]; + struct i2c_msg msg[] = { + {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3}, + }; + if (dvb_usb_opera1_debug) + info("%s hw-pidfilter", onoff ? "enable" : "disable"); + for (; u < 0x7e; u += 2) { + b_pid[0] = u; + b_pid[1] = 0; + b_pid[2] = 0x80; + i2c_transfer(&adap->dev->i2c_adap, msg, 1); + } + return 0; +} + +static struct rc_map_table rc_map_opera1_table[] = { + {0x5fa0, KEY_1}, + {0x51af, KEY_2}, + {0x5da2, KEY_3}, + {0x41be, KEY_4}, + {0x0bf5, KEY_5}, + {0x43bd, KEY_6}, + {0x47b8, KEY_7}, + {0x49b6, KEY_8}, + {0x05fa, KEY_9}, + {0x45ba, KEY_0}, + {0x09f6, KEY_CHANNELUP}, /*chanup */ + {0x1be5, KEY_CHANNELDOWN}, /*chandown */ + {0x5da3, KEY_VOLUMEDOWN}, /*voldown */ + {0x5fa1, KEY_VOLUMEUP}, /*volup */ + {0x07f8, KEY_SPACE}, /*tab */ + {0x1fe1, KEY_OK}, /*play ok */ + {0x1be4, KEY_ZOOM}, /*zoom */ + {0x59a6, KEY_MUTE}, /*mute */ + {0x5ba5, KEY_RADIO}, /*tv/f */ + {0x19e7, KEY_RECORD}, /*rec */ + {0x01fe, KEY_STOP}, /*Stop */ + {0x03fd, KEY_PAUSE}, /*pause */ + {0x03fc, KEY_SCREEN}, /*<- -> */ + {0x07f9, KEY_CAMERA}, /*capture */ + {0x47b9, KEY_ESC}, /*exit */ + {0x43bc, KEY_POWER2}, /*power */ +}; + +static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state) +{ + struct opera1_state *opst = dev->priv; + u8 rcbuffer[32]; + const u16 startmarker1 = 0x10ed; + const u16 startmarker2 = 0x11ec; + struct i2c_msg read_remote[] = { + {.addr = ADDR_B880_READ_REMOTE,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32}, + }; + int i = 0; + u32 send_key = 0; + + if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) { + for (i = 0; i < 32; i++) { + if (rcbuffer[i]) + send_key |= 1; + if (i < 31) + send_key = send_key << 1; + } + if (send_key & 0x8000) + send_key = (send_key << 1) | (send_key >> 15 & 0x01); + + if (send_key == 0xffff && opst->last_key_pressed != 0) { + *state = REMOTE_KEY_REPEAT; + *event = opst->last_key_pressed; + return 0; + } + for (; send_key != 0;) { + if (send_key >> 16 == startmarker2) { + break; + } else if (send_key >> 16 == startmarker1) { + send_key = + (send_key & 0xfffeffff) | (startmarker1 << 16); + break; + } else + send_key >>= 1; + } + + if (send_key == 0) + return 0; + + send_key = (send_key & 0xffff) | 0x0100; + + for (i = 0; i < ARRAY_SIZE(rc_map_opera1_table); i++) { + if (rc5_scan(&rc_map_opera1_table[i]) == (send_key & 0xffff)) { + *state = REMOTE_KEY_PRESSED; + *event = rc_map_opera1_table[i].keycode; + opst->last_key_pressed = + rc_map_opera1_table[i].keycode; + break; + } + opst->last_key_pressed = 0; + } + } else + *state = REMOTE_NO_KEY_PRESSED; + return 0; +} + +static struct usb_device_id opera1_table[] = { + {USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD)}, + {USB_DEVICE(USB_VID_OPERA1, USB_PID_OPERA1_WARM)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, opera1_table); + +static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) +{ + u8 command[] = { READ_MAC_ADDR }; + opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG); + opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG); + return 0; +} +static int opera1_xilinx_load_firmware(struct usb_device *dev, + const char *filename) +{ + const struct firmware *fw = NULL; + u8 *b, *p; + int ret = 0, i,fpgasize=40; + u8 testval; + info("start downloading fpga firmware %s",filename); + + if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) { + err("did not find the firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details on firmware-problems.", + filename); + return ret; + } else { + p = kmalloc(fw->size, GFP_KERNEL); + opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG); + if (p != NULL && testval != 0x67) { + + u8 reset = 0, fpga_command = 0; + memcpy(p, fw->data, fw->size); + /* clear fpga ? */ + opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1, + OPERA_WRITE_MSG); + for (i = 0; i < fw->size;) { + if ( (fw->size - i) size-i; + } + b = (u8 *) p + i; + if (opera1_xilinx_rw + (dev, OPERA_WRITE_FX2, 0x0, b , fpgasize, + OPERA_WRITE_MSG) != fpgasize + ) { + err("error while transferring firmware"); + ret = -EINVAL; + break; + } + i = i + fpgasize; + } + /* restart the CPU */ + if (ret || opera1_xilinx_rw + (dev, 0xa0, 0xe600, &reset, 1, + OPERA_WRITE_MSG) != 1) { + err("could not restart the USB controller CPU."); + ret = -EINVAL; + } + } + } + kfree(p); + release_firmware(fw); + return ret; +} + +static struct dvb_usb_device_properties opera1_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-opera-01.fw", + .size_of_priv = sizeof(struct opera1_state), + + .power_ctrl = opera1_power_ctrl, + .i2c_algo = &opera1_i2c_algo, + + .rc.legacy = { + .rc_map_table = rc_map_opera1_table, + .rc_map_size = ARRAY_SIZE(rc_map_opera1_table), + .rc_interval = 200, + .rc_query = opera1_rc_query, + }, + .read_mac_address = opera1_read_mac_address, + .generic_bulk_ctrl_endpoint = 0x00, + /* parameter for the MPEG2-data transfer */ + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = opera1_frontend_attach, + .streaming_ctrl = opera1_streaming_ctrl, + .tuner_attach = opera1_tuner_attach, + .caps = + DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter = opera1_pid_filter, + .pid_filter_ctrl = opera1_pid_filter_control, + .pid_filter_count = 252, + .stream = { + .type = USB_BULK, + .count = 10, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } + }, + .num_device_descs = 1, + .devices = { + {"Opera1 DVB-S USB2.0", + {&opera1_table[0], NULL}, + {&opera1_table[1], NULL}, + }, + } +}; + +static int opera1_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + + if (udev->descriptor.idProduct == USB_PID_OPERA1_WARM && + udev->descriptor.idVendor == USB_VID_OPERA1 && + opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga-01.fw") != 0 + ) { + return -EINVAL; + } + + if (0 != dvb_usb_device_init(intf, &opera1_properties, + THIS_MODULE, NULL, adapter_nr)) + return -EINVAL; + return 0; +} + +static struct usb_driver opera1_driver = { + .name = "opera1", + .probe = opera1_probe, + .disconnect = dvb_usb_device_exit, + .id_table = opera1_table, +}; + +module_usb_driver(opera1_driver); + +MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@amsat.org"); +MODULE_AUTHOR("Marco Gittler (c) g.marco@freenet.de"); +MODULE_DESCRIPTION("Driver for Opera1 DVB-S device"); +MODULE_VERSION("0.1"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3