From ddd86436f4e3643c04b797f858dab95d5f2e4de9 Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 15:00:15 +0000 Subject: fish --- drivers/media/usb/dvb-usb/dib0700_devices.c | 4792 +++++++++++++++++++++++++++ 1 file changed, 4792 insertions(+) create mode 100644 drivers/media/usb/dvb-usb/dib0700_devices.c (limited to 'drivers/media/usb/dvb-usb/dib0700_devices.c') diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c new file mode 100644 index 0000000..f081360 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dib0700_devices.c @@ -0,0 +1,4792 @@ +/* Linux driver for devices based on the DiBcom DiB0700 USB bridge + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * Copyright (C) 2005-9 DiBcom, SA et al + */ +#include "dib0700.h" + +#include "dib3000mc.h" +#include "dib7000m.h" +#include "dib7000p.h" +#include "dib8000.h" +#include "dib9000.h" +#include "mt2060.h" +#include "mt2266.h" +#include "tuner-xc2028.h" +#include "xc5000.h" +#include "xc4000.h" +#include "s5h1411.h" +#include "dib0070.h" +#include "dib0090.h" +#include "lgdt3305.h" +#include "mxl5007t.h" + +static int force_lna_activation; +module_param(force_lna_activation, int, 0644); +MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), " + "if applicable for the device (default: 0=automatic/off)."); + +struct dib0700_adapter_state { + int (*set_param_save) (struct dvb_frontend *); + const struct firmware *frontend_firmware; +}; + +/* Hauppauge Nova-T 500 (aka Bristol) + * has a LNA on GPIO0 which is enabled by setting 1 */ +static struct mt2060_config bristol_mt2060_config[2] = { + { + .i2c_address = 0x60, + .clock_out = 3, + }, { + .i2c_address = 0x61, + } +}; + + +static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = { + .band_caps = BAND_VHF | BAND_UHF, + .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0), + + .agc1_max = 42598, + .agc1_min = 17694, + .agc2_max = 45875, + .agc2_min = 0, + + .agc1_pt1 = 0, + .agc1_pt2 = 59, + + .agc1_slope1 = 0, + .agc1_slope2 = 69, + + .agc2_pt1 = 0, + .agc2_pt2 = 59, + + .agc2_slope1 = 111, + .agc2_slope2 = 28, +}; + +static struct dib3000mc_config bristol_dib3000mc_config[2] = { + { .agc = &bristol_dib3000p_mt2060_agc_config, + .max_time = 0x196, + .ln_adc_level = 0x1cc7, + .output_mpeg2_in_188_bytes = 1, + }, + { .agc = &bristol_dib3000p_mt2060_agc_config, + .max_time = 0x196, + .ln_adc_level = 0x1cc7, + .output_mpeg2_in_188_bytes = 1, + } +}; + +static int bristol_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + if (adap->id == 0) { + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); + + if (force_lna_activation) + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + else + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); + + if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) { + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); + return -ENODEV; + } + } + st->mt2060_if1[adap->id] = 1220; + return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, + (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0; +} + +static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval) +{ + struct i2c_msg msg[2] = { + { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 }, + { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 }, + }; + if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO; + return 0; +} + +static int bristol_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; + struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1); + s8 a; + int if1=1220; + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) { + if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; + } + return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, + &bristol_mt2060_config[adap->id], if1) == NULL ? + -ENODEV : 0; +} + +/* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */ + +/* MT226x */ +static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = { + { + BAND_UHF, + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + + 1130, + 21, + + 0, + 118, + + 0, + 3530, + 1, + 0, + + 65535, + 33770, + 65535, + 23592, + + 0, + 62, + 255, + 64, + 64, + 132, + 192, + 80, + 80, + + 17, + 27, + 23, + 51, + + 1, + }, { + BAND_VHF | BAND_LBAND, + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), + + 2372, + 21, + + 0, + 118, + + 0, + 3530, + 1, + 0, + + 65535, + 0, + 65535, + 23592, + + 0, + 128, + 128, + 128, + 0, + 128, + 253, + 81, + 0, + + 17, + 27, + 23, + 51, + + 1, + } +}; + +static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = { + 60000, 30000, + 1, 8, 3, 1, 0, + 0, 0, 1, 1, 2, + (3 << 14) | (1 << 12) | (524 << 0), + 0, + 20452225, +}; + +static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = { + { .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 1, + + .agc_config_count = 2, + .agc = stk7700d_7000p_mt2266_agc_config, + .bw = &stk7700d_mt2266_pll_config, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + }, + { .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 1, + + .agc_config_count = 2, + .agc = stk7700d_7000p_mt2266_agc_config, + .bw = &stk7700d_mt2266_pll_config, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + } +}; + +static struct mt2266_config stk7700d_mt2266_config[2] = { + { .i2c_address = 0x60 + }, + { .i2c_address = 0x60 + } +}; + +static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (adap->id == 0) { + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + stk7700d_dib7000p_mt2266_config) + != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); + return -ENODEV; + } + } + + adap->fe_adap[0].fe = + dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, + 0x80 + (adap->id << 1), + &stk7700d_dib7000p_mt2266_config[adap->id]); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (adap->id == 0) { + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, + stk7700d_dib7000p_mt2266_config) + != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); + return -ENODEV; + } + } + + adap->fe_adap[0].fe = + dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, + 0x80 + (adap->id << 1), + &stk7700d_dib7000p_mt2266_config[adap->id]); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *tun_i2c; + tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); + return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c, + &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0; +} + +/* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */ +static struct dibx000_agc_config xc3028_agc_config = { + BAND_VHF | BAND_UHF, /* band_caps */ + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | + (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */ + + 712, /* inv_gain */ + 21, /* time_stabiliz */ + + 0, /* alpha_level */ + 118, /* thlock */ + + 0, /* wbd_inv */ + 2867, /* wbd_ref */ + 0, /* wbd_sel */ + 2, /* wbd_alpha */ + + 0, /* agc1_max */ + 0, /* agc1_min */ + 39718, /* agc2_max */ + 9930, /* agc2_min */ + 0, /* agc1_pt1 */ + 0, /* agc1_pt2 */ + 0, /* agc1_pt3 */ + 0, /* agc1_slope1 */ + 0, /* agc1_slope2 */ + 0, /* agc2_pt1 */ + 128, /* agc2_pt2 */ + 29, /* agc2_slope1 */ + 29, /* agc2_slope2 */ + + 17, /* alpha_mant */ + 27, /* alpha_exp */ + 23, /* beta_mant */ + 51, /* beta_exp */ + + 1, /* perform_agc_softsplit */ +}; + +/* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */ +static struct dibx000_bandwidth_config xc3028_bw_config = { + 60000, 30000, /* internal, sampling */ + 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */ + 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, + modulo */ + (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ + (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ + 20452225, /* timf */ + 30000000, /* xtal_hz */ +}; + +static struct dib7000p_config stk7700ph_dib7700_xc3028_config = { + .output_mpeg2_in_188_bytes = 1, + .tuner_is_baseband = 1, + + .agc_config_count = 1, + .agc = &xc3028_agc_config, + .bw = &xc3028_bw_config, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, +}; + +static int stk7700ph_xc3028_callback(void *ptr, int component, + int command, int arg) +{ + struct dvb_usb_adapter *adap = ptr; + + switch (command) { + case XC2028_TUNER_RESET: + /* Send the tuner in then out of reset */ + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0); msleep(10); + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + break; + case XC2028_RESET_CLK: + break; + default: + err("%s: unknown command %d, arg %d\n", __func__, + command, arg); + return -EINVAL; + } + return 0; +} + +static struct xc2028_ctrl stk7700ph_xc3028_ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_DIBCOM52, +}; + +static struct xc2028_config stk7700ph_xc3028_config = { + .i2c_addr = 0x61, + .ctrl = &stk7700ph_xc3028_ctrl, +}; + +static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct usb_device_descriptor *desc = &adap->dev->udev->descriptor; + + if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + else + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + msleep(10); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + &stk7700ph_dib7700_xc3028_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, + &stk7700ph_dib7700_xc3028_config); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *tun_i2c; + + tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + + stk7700ph_xc3028_config.i2c_adap = tun_i2c; + + /* FIXME: generalize & move to common area */ + adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback; + + return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config) + == NULL ? -ENODEV : 0; +} + +#define DEFAULT_RC_INTERVAL 50 + +static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; + +/* Number of keypresses to ignore before start repeating */ +#define RC_REPEAT_DELAY 6 + +/* + * This function is used only when firmware is < 1.20 version. Newer + * firmwares use bulk mode, with functions implemented at dib0700_core, + * at dib0700_rc_urb_completion() + */ +static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d) +{ + u8 key[4]; + u32 keycode; + u8 toggle; + int i; + struct dib0700_state *st = d->priv; + + if (st->fw_version >= 0x10200) { + /* For 1.20 firmware , We need to keep the RC polling + callback so we can reuse the input device setup in + dvb-usb-remote.c. However, the actual work is being done + in the bulk URB completion handler. */ + return 0; + } + + i = dib0700_ctrl_rd(d, rc_request, 2, key, 4); + if (i <= 0) { + err("RC Query Failed"); + return -1; + } + + /* losing half of KEY_0 events from Philipps rc5 remotes.. */ + if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0) + return 0; + + /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */ + + dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */ + + d->last_event = 0; + switch (d->props.rc.core.protocol) { + case RC_BIT_NEC: + /* NEC protocol sends repeat code as 0 0 0 FF */ + if ((key[3-2] == 0x00) && (key[3-3] == 0x00) && + (key[3] == 0xff)) + keycode = d->last_event; + else { + keycode = key[3-2] << 8 | key[3-3]; + d->last_event = keycode; + } + + rc_keydown(d->rc_dev, keycode, 0); + break; + default: + /* RC-5 protocol changes toggle bit on new keypress */ + keycode = key[3-2] << 8 | key[3-3]; + toggle = key[3-1]; + rc_keydown(d->rc_dev, keycode, toggle); + + break; + } + return 0; +} + +/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */ +static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = { + BAND_UHF | BAND_VHF, + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), + + 712, + 41, + + 0, + 118, + + 0, + 4095, + 0, + 0, + + 42598, + 17694, + 45875, + 2621, + 0, + 76, + 139, + 52, + 59, + 107, + 172, + 57, + 70, + + 21, + 25, + 28, + 48, + + 1, + { 0, + 107, + 51800, + 24700 + }, +}; + +static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = { + BAND_UHF | BAND_VHF, + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), + + 712, + 41, + + 0, + 118, + + 0, + 4095, + 0, + 0, + + 42598, + 16384, + 42598, + 0, + + 0, + 137, + 255, + + 0, + 255, + + 0, + 0, + + 0, + 41, + + 15, + 25, + + 28, + 48, + + 0, +}; + +static struct dibx000_bandwidth_config stk7700p_pll_config = { + 60000, 30000, + 1, 8, 3, 1, 0, + 0, 0, 1, 1, 0, + (3 << 14) | (1 << 12) | (524 << 0), + 60258167, + 20452225, + 30000000, +}; + +static struct dib7000m_config stk7700p_dib7000m_config = { + .dvbt_mode = 1, + .output_mpeg2_in_188_bytes = 1, + .quartz_direct = 1, + + .agc_config_count = 1, + .agc = &stk7700p_7000m_mt2060_agc_config, + .bw = &stk7700p_pll_config, + + .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, +}; + +static struct dib7000p_config stk7700p_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &stk7700p_7000p_mt2060_agc_config, + .bw = &stk7700p_pll_config, + + .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, +}; + +static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + /* unless there is no real power management in DVB - we leave the device on GPIO6 */ + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50); + + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); + dib0700_ctrl_clock(adap->dev, 72, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100); + + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + st->mt2060_if1[0] = 1220; + + if (dib7000pc_detection(&adap->dev->i2c_adap)) { + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config); + st->is_dib7000pc = 1; + } else + adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static struct mt2060_config stk7700p_mt2060_config = { + 0x60 +}; + +static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; + struct dib0700_state *st = adap->dev->priv; + struct i2c_adapter *tun_i2c; + s8 a; + int if1=1220; + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) { + if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; + } + if (st->is_dib7000pc) + tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); + else + tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); + + return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config, + if1) == NULL ? -ENODEV : 0; +} + +/* DIB7070 generic */ +static struct dibx000_agc_config dib7070_agc_config = { + BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + + 600, + 10, + + 0, + 118, + + 0, + 3530, + 1, + 5, + + 65535, + 0, + + 65535, + 0, + + 0, + 40, + 183, + 206, + 255, + 72, + 152, + 88, + 90, + + 17, + 27, + 23, + 51, + + 0, +}; + +static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) +{ + deb_info("reset: %d", onoff); + return dib7000p_set_gpio(fe, 8, 0, !onoff); +} + +static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + deb_info("sleep: %d", onoff); + return dib7000p_set_gpio(fe, 9, 0, onoff); +} + +static struct dib0070_config dib7070p_dib0070_config[2] = { + { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib7070_tuner_reset, + .sleep = dib7070_tuner_sleep, + .clock_khz = 12000, + .clock_pad_drive = 4, + .charge_pump = 2, + }, { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib7070_tuner_reset, + .sleep = dib7070_tuner_sleep, + .clock_khz = 12000, + .charge_pump = 2, + } +}; + +static struct dib0070_config dib7770p_dib0070_config = { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib7070_tuner_reset, + .sleep = dib7070_tuner_sleep, + .clock_khz = 12000, + .clock_pad_drive = 0, + .flip_chip = 1, + .charge_pump = 2, +}; + +static int dib7070_set_param_override(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + + u16 offset; + u8 band = BAND_OF_FREQUENCY(p->frequency/1000); + switch (band) { + case BAND_VHF: offset = 950; break; + case BAND_UHF: + default: offset = 550; break; + } + deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe)); + dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); + return state->set_param_save(fe); +} + +static int dib7770_set_param_override(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + + u16 offset; + u8 band = BAND_OF_FREQUENCY(p->frequency/1000); + switch (band) { + case BAND_VHF: + dib7000p_set_gpio(fe, 0, 0, 1); + offset = 850; + break; + case BAND_UHF: + default: + dib7000p_set_gpio(fe, 0, 0, 0); + offset = 250; + break; + } + deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe)); + dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); + return state->set_param_save(fe); +} + +static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + + if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, + &dib7770p_dib0070_config) == NULL) + return -ENODEV; + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override; + return 0; +} + +static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); + + if (adap->id == 0) { + if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL) + return -ENODEV; + } else { + if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL) + return -ENODEV; + } + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override; + return 0; +} + +static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index, + u16 pid, int onoff) +{ + struct dib0700_state *st = adapter->dev->priv; + if (st->is_dib7000pc) + return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); + return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); +} + +static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) +{ + struct dib0700_state *st = adapter->dev->priv; + if (st->is_dib7000pc) + return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); + return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); +} + +static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff) +{ + return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); +} + +static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) +{ + return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); +} + +static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { + 60000, 15000, + 1, 20, 3, 1, 0, + 0, 0, 1, 1, 2, + (3 << 14) | (1 << 12) | (524 << 0), + (0 << 25) | 0, + 20452225, + 12000000, +}; + +static struct dib7000p_config dib7070p_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &dib7070_agc_config, + .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, +}; + +/* STK7070P */ +static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct usb_device_descriptor *p = &adap->dev->udev->descriptor; + if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + else + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + &dib7070p_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, + &dib7070p_dib7000p_config); + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +/* STK7770P */ +static struct dib7000p_config dib7770p_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &dib7070_agc_config, + .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .enable_current_mirror = 1, + .disable_sample_and_hold = 0, +}; + +static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct usb_device_descriptor *p = &adap->dev->udev->descriptor; + if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + else + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + &dib7770p_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, + &dib7770p_dib7000p_config); + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +/* DIB807x generic */ +static struct dibx000_agc_config dib807x_agc_config[2] = { + { + BAND_VHF, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, + * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, + * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, + * P_agc_write=0 */ + (0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) | + (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | + (0 << 0), /* setup*/ + + 600, /* inv_gain*/ + 10, /* time_stabiliz*/ + + 0, /* alpha_level*/ + 118, /* thlock*/ + + 0, /* wbd_inv*/ + 3530, /* wbd_ref*/ + 1, /* wbd_sel*/ + 5, /* wbd_alpha*/ + + 65535, /* agc1_max*/ + 0, /* agc1_min*/ + + 65535, /* agc2_max*/ + 0, /* agc2_min*/ + + 0, /* agc1_pt1*/ + 40, /* agc1_pt2*/ + 183, /* agc1_pt3*/ + 206, /* agc1_slope1*/ + 255, /* agc1_slope2*/ + 72, /* agc2_pt1*/ + 152, /* agc2_pt2*/ + 88, /* agc2_slope1*/ + 90, /* agc2_slope2*/ + + 17, /* alpha_mant*/ + 27, /* alpha_exp*/ + 23, /* beta_mant*/ + 51, /* beta_exp*/ + + 0, /* perform_agc_softsplit*/ + }, { + BAND_UHF, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, + * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, + * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, + * P_agc_write=0 */ + (0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) | + (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | + (0 << 0), /* setup */ + + 600, /* inv_gain*/ + 10, /* time_stabiliz*/ + + 0, /* alpha_level*/ + 118, /* thlock*/ + + 0, /* wbd_inv*/ + 3530, /* wbd_ref*/ + 1, /* wbd_sel*/ + 5, /* wbd_alpha*/ + + 65535, /* agc1_max*/ + 0, /* agc1_min*/ + + 65535, /* agc2_max*/ + 0, /* agc2_min*/ + + 0, /* agc1_pt1*/ + 40, /* agc1_pt2*/ + 183, /* agc1_pt3*/ + 206, /* agc1_slope1*/ + 255, /* agc1_slope2*/ + 72, /* agc2_pt1*/ + 152, /* agc2_pt2*/ + 88, /* agc2_slope1*/ + 90, /* agc2_slope2*/ + + 17, /* alpha_mant*/ + 27, /* alpha_exp*/ + 23, /* beta_mant*/ + 51, /* beta_exp*/ + + 0, /* perform_agc_softsplit*/ + } +}; + +static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = { + 60000, 15000, /* internal, sampling*/ + 1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/ + 0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core, + ADClkSrc, modulo */ + (3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/ + (0 << 25) | 0, /* ifreq = 0.000000 MHz*/ + 18179755, /* timf*/ + 12000000, /* xtal_hz*/ +}; + +static struct dib8000_config dib807x_dib8000_config[2] = { + { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 2, + .agc = dib807x_agc_config, + .pll = &dib807x_bw_config_12_mhz, + .tuner_is_baseband = 1, + + .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .div_cfg = 1, + .agc_control = &dib0070_ctrl_agc_filter, + .output_mode = OUTMODE_MPEG2_FIFO, + .drives = 0x2d98, + }, { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 2, + .agc = dib807x_agc_config, + .pll = &dib807x_bw_config_12_mhz, + .tuner_is_baseband = 1, + + .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .agc_control = &dib0070_ctrl_agc_filter, + .output_mode = OUTMODE_MPEG2_FIFO, + .drives = 0x2d98, + } +}; + +static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff) +{ + return dib8000_set_gpio(fe, 5, 0, !onoff); +} + +static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + return dib8000_set_gpio(fe, 0, 0, onoff); +} + +static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = { + { 240, 7}, + { 0xffff, 6}, +}; + +static struct dib0070_config dib807x_dib0070_config[2] = { + { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib80xx_tuner_reset, + .sleep = dib80xx_tuner_sleep, + .clock_khz = 12000, + .clock_pad_drive = 4, + .vga_filter = 1, + .force_crystal_mode = 1, + .enable_third_order_filter = 1, + .charge_pump = 0, + .wbd_gain = dib8070_wbd_gain_cfg, + .osc_buffer_state = 0, + .freq_offset_khz_uhf = -100, + .freq_offset_khz_vhf = -100, + }, { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib80xx_tuner_reset, + .sleep = dib80xx_tuner_sleep, + .clock_khz = 12000, + .clock_pad_drive = 2, + .vga_filter = 1, + .force_crystal_mode = 1, + .enable_third_order_filter = 1, + .charge_pump = 0, + .wbd_gain = dib8070_wbd_gain_cfg, + .osc_buffer_state = 0, + .freq_offset_khz_uhf = -25, + .freq_offset_khz_vhf = -25, + } +}; + +static int dib807x_set_param_override(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + + u16 offset = dib0070_wbd_offset(fe); + u8 band = BAND_OF_FREQUENCY(p->frequency/1000); + switch (band) { + case BAND_VHF: + offset += 750; + break; + case BAND_UHF: /* fall-thru wanted */ + default: + offset += 250; break; + } + deb_info("WBD for DiB8000: %d\n", offset); + dib8000_set_wbd_ref(fe, offset); + + return state->set_param_save(fe); +} + +static int dib807x_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + + if (adap->id == 0) { + if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, + &dib807x_dib0070_config[0]) == NULL) + return -ENODEV; + } else { + if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, + &dib807x_dib0070_config[1]) == NULL) + return -ENODEV; + } + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib807x_set_param_override; + return 0; +} + +static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index, + u16 pid, int onoff) +{ + return dib8000_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); +} + +static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter, + int onoff) +{ + return dib8000_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); +} + +/* STK807x */ +static int stk807x_frontend_attach(struct dvb_usb_adapter *adap) +{ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + 0x80, 0); + + adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, + &dib807x_dib8000_config[0]); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +/* STK807xPVR */ +static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap) +{ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(500); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + /* initialize IC 0 */ + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80, 0); + + adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, + &dib807x_dib8000_config[0]); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap) +{ + /* initialize IC 1 */ + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82, 0); + + adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82, + &dib807x_dib8000_config[1]); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +/* STK8096GP */ +static struct dibx000_agc_config dib8090_agc_config[2] = { + { + BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + + 787, + 10, + + 0, + 118, + + 0, + 3530, + 1, + 5, + + 65535, + 0, + + 65535, + 0, + + 0, + 32, + 114, + 143, + 144, + 114, + 227, + 116, + 117, + + 28, + 26, + 31, + 51, + + 0, + }, + { + BAND_CBAND, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + + 787, + 10, + + 0, + 118, + + 0, + 3530, + 1, + 5, + + 0, + 0, + + 65535, + 0, + + 0, + 32, + 114, + 143, + 144, + 114, + 227, + 116, + 117, + + 28, + 26, + 31, + 51, + + 0, + } +}; + +static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = { + 54000, 13500, + 1, 18, 3, 1, 0, + 0, 0, 1, 1, 2, + (3 << 14) | (1 << 12) | (599 << 0), + (0 << 25) | 0, + 20199727, + 12000000, +}; + +static int dib8090_get_adc_power(struct dvb_frontend *fe) +{ + return dib8000_get_adc_power(fe, 1); +} + +static void dib8090_agc_control(struct dvb_frontend *fe, u8 restart) +{ + deb_info("AGC control callback: %i\n", restart); + dib0090_dcc_freq(fe, restart); + + if (restart == 0) /* before AGC startup */ + dib0090_set_dc_servo(fe, 1); +} + +static struct dib8000_config dib809x_dib8000_config[2] = { + { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 2, + .agc = dib8090_agc_config, + .agc_control = dib8090_agc_control, + .pll = &dib8090_pll_config_12mhz, + .tuner_is_baseband = 1, + + .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .div_cfg = 0x31, + .output_mode = OUTMODE_MPEG2_FIFO, + .drives = 0x2d98, + .diversity_delay = 48, + .refclksel = 3, + }, { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 2, + .agc = dib8090_agc_config, + .agc_control = dib8090_agc_control, + .pll = &dib8090_pll_config_12mhz, + .tuner_is_baseband = 1, + + .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .div_cfg = 0x31, + .output_mode = OUTMODE_DIVERSITY, + .drives = 0x2d08, + .diversity_delay = 1, + .refclksel = 3, + } +}; + +static struct dib0090_wbd_slope dib8090_wbd_table[] = { + /* max freq ; cold slope ; cold offset ; warm slope ; warm offset ; wbd gain */ + { 120, 0, 500, 0, 500, 4 }, /* CBAND */ + { 170, 0, 450, 0, 450, 4 }, /* CBAND */ + { 380, 48, 373, 28, 259, 6 }, /* VHF */ + { 860, 34, 700, 36, 616, 6 }, /* high UHF */ + { 0xFFFF, 34, 700, 36, 616, 6 }, /* default */ +}; + +static struct dib0090_config dib809x_dib0090_config = { + .io.pll_bypass = 1, + .io.pll_range = 1, + .io.pll_prediv = 1, + .io.pll_loopdiv = 20, + .io.adc_clock_ratio = 8, + .io.pll_int_loop_filt = 0, + .io.clock_khz = 12000, + .reset = dib80xx_tuner_reset, + .sleep = dib80xx_tuner_sleep, + .clkouttobamse = 1, + .analog_output = 1, + .i2c_address = DEFAULT_DIB0090_I2C_ADDRESS, + .use_pwm_agc = 1, + .clkoutdrive = 1, + .get_adc_power = dib8090_get_adc_power, + .freq_offset_khz_uhf = -63, + .freq_offset_khz_vhf = -143, + .wbd = dib8090_wbd_table, + .fref_clock_ratio = 6, +}; + +static u8 dib8090_compute_pll_parameters(struct dvb_frontend *fe) +{ + u8 optimal_pll_ratio = 20; + u32 freq_adc, ratio, rest, max = 0; + u8 pll_ratio; + + for (pll_ratio = 17; pll_ratio <= 20; pll_ratio++) { + freq_adc = 12 * pll_ratio * (1 << 8) / 16; + ratio = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) / freq_adc; + rest = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) - ratio * freq_adc; + + if (rest > freq_adc / 2) + rest = freq_adc - rest; + deb_info("PLL ratio=%i rest=%i\n", pll_ratio, rest); + if ((rest > max) && (rest > 717)) { + optimal_pll_ratio = pll_ratio; + max = rest; + } + } + deb_info("optimal PLL ratio=%i\n", optimal_pll_ratio); + + return optimal_pll_ratio; +} + +static int dib8096_set_param_override(struct dvb_frontend *fe) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + u8 pll_ratio, band = BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000); + u16 target, ltgain, rf_gain_limit; + u32 timf; + int ret = 0; + enum frontend_tune_state tune_state = CT_SHUTDOWN; + + switch (band) { + default: + deb_info("Warning : Rf frequency (%iHz) is not in the supported range, using VHF switch ", fe->dtv_property_cache.frequency); + case BAND_VHF: + dib8000_set_gpio(fe, 3, 0, 1); + break; + case BAND_UHF: + dib8000_set_gpio(fe, 3, 0, 0); + break; + } + + ret = state->set_param_save(fe); + if (ret < 0) + return ret; + + if (fe->dtv_property_cache.bandwidth_hz != 6000000) { + deb_info("only 6MHz bandwidth is supported\n"); + return -EINVAL; + } + + /** Update PLL if needed ratio **/ + dib8000_update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, 0); + + /** Get optimize PLL ratio to remove spurious **/ + pll_ratio = dib8090_compute_pll_parameters(fe); + if (pll_ratio == 17) + timf = 21387946; + else if (pll_ratio == 18) + timf = 20199727; + else if (pll_ratio == 19) + timf = 19136583; + else + timf = 18179756; + + /** Update ratio **/ + dib8000_update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, pll_ratio); + + dib8000_ctrl_timf(fe, DEMOD_TIMF_SET, timf); + + if (band != BAND_CBAND) { + /* dib0090_get_wbd_target is returning any possible temperature compensated wbd-target */ + target = (dib0090_get_wbd_target(fe) * 8 * 18 / 33 + 1) / 2; + dib8000_set_wbd_ref(fe, target); + } + + if (band == BAND_CBAND) { + deb_info("tuning in CBAND - soft-AGC startup\n"); + dib0090_set_tune_state(fe, CT_AGC_START); + + do { + ret = dib0090_gain_control(fe); + msleep(ret); + tune_state = dib0090_get_tune_state(fe); + if (tune_state == CT_AGC_STEP_0) + dib8000_set_gpio(fe, 6, 0, 1); + else if (tune_state == CT_AGC_STEP_1) { + dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, <gain); + if (rf_gain_limit < 2000) /* activate the external attenuator in case of very high input power */ + dib8000_set_gpio(fe, 6, 0, 0); + } + } while (tune_state < CT_AGC_STOP); + + deb_info("switching to PWM AGC\n"); + dib0090_pwm_gain_reset(fe); + dib8000_pwm_agc_reset(fe); + dib8000_set_tune_state(fe, CT_DEMOD_START); + } else { + /* for everything else than CBAND we are using standard AGC */ + deb_info("not tuning in CBAND - standard AGC startup\n"); + dib0090_pwm_gain_reset(fe); + } + + return 0; +} + +static int dib809x_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); + + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL) + return -ENODEV; + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override; + return 0; +} + +static int stk809x_frontend_attach(struct dvb_usb_adapter *adap) +{ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80, 0); + + adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c; + struct dvb_frontend *fe_slave = dib8000_get_slave_frontend(adap->fe_adap[0].fe, 1); + + if (fe_slave) { + tun_i2c = dib8000_get_i2c_master(fe_slave, DIBX000_I2C_INTERFACE_TUNER, 1); + if (dvb_attach(dib0090_register, fe_slave, tun_i2c, &dib809x_dib0090_config) == NULL) + return -ENODEV; + fe_slave->dvb = adap->fe_adap[0].fe->dvb; + fe_slave->ops.tuner_ops.set_params = dib8096_set_param_override; + } + tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL) + return -ENODEV; + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override; + + return 0; +} + +static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_frontend *fe_slave; + + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(1000); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(20); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80, 0); + + adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]); + if (adap->fe_adap[0].fe == NULL) + return -ENODEV; + + fe_slave = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]); + dib8000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave); + + return fe_slave == NULL ? -ENODEV : 0; +} + +/* TFE8096P */ +static struct dibx000_agc_config dib8096p_agc_config[2] = { + { + .band_caps = BAND_UHF, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, + P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, + P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, + P_agc_write=0 */ + .setup = (0 << 15) | (0 << 14) | (5 << 11) + | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) + | (0 << 4) | (5 << 1) | (0 << 0), + + .inv_gain = 684, + .time_stabiliz = 10, + + .alpha_level = 0, + .thlock = 118, + + .wbd_inv = 0, + .wbd_ref = 1200, + .wbd_sel = 3, + .wbd_alpha = 5, + + .agc1_max = 65535, + .agc1_min = 0, + + .agc2_max = 32767, + .agc2_min = 0, + + .agc1_pt1 = 0, + .agc1_pt2 = 0, + .agc1_pt3 = 105, + .agc1_slope1 = 0, + .agc1_slope2 = 156, + .agc2_pt1 = 105, + .agc2_pt2 = 255, + .agc2_slope1 = 54, + .agc2_slope2 = 0, + + .alpha_mant = 28, + .alpha_exp = 26, + .beta_mant = 31, + .beta_exp = 51, + + .perform_agc_softsplit = 0, + } , { + .band_caps = BAND_FM | BAND_VHF | BAND_CBAND, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, + P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, + P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, + P_agc_write=0 */ + .setup = (0 << 15) | (0 << 14) | (5 << 11) + | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) + | (0 << 4) | (5 << 1) | (0 << 0), + + .inv_gain = 732, + .time_stabiliz = 10, + + .alpha_level = 0, + .thlock = 118, + + .wbd_inv = 0, + .wbd_ref = 1200, + .wbd_sel = 3, + .wbd_alpha = 5, + + .agc1_max = 65535, + .agc1_min = 0, + + .agc2_max = 32767, + .agc2_min = 0, + + .agc1_pt1 = 0, + .agc1_pt2 = 0, + .agc1_pt3 = 98, + .agc1_slope1 = 0, + .agc1_slope2 = 167, + .agc2_pt1 = 98, + .agc2_pt2 = 255, + .agc2_slope1 = 52, + .agc2_slope2 = 0, + + .alpha_mant = 28, + .alpha_exp = 26, + .beta_mant = 31, + .beta_exp = 51, + + .perform_agc_softsplit = 0, + } +}; + +static struct dibx000_bandwidth_config dib8096p_clock_config_12_mhz = { + 108000, 13500, + 1, 9, 1, 0, 0, + 0, 0, 0, 0, 2, + (3 << 14) | (1 << 12) | (524 << 0), + (0 << 25) | 0, + 20199729, + 12000000, +}; + +static struct dib8000_config tfe8096p_dib8000_config = { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .update_lna = NULL, + + .agc_config_count = 2, + .agc = dib8096p_agc_config, + .pll = &dib8096p_clock_config_12_mhz, + + .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, + + .agc_control = NULL, + .diversity_delay = 48, + .output_mode = OUTMODE_MPEG2_FIFO, + .enMpegOutput = 1, +}; + +static struct dib0090_wbd_slope dib8096p_wbd_table[] = { + { 380, 81, 850, 64, 540, 4}, + { 860, 51, 866, 21, 375, 4}, + {1700, 0, 250, 0, 100, 6}, + {2600, 0, 250, 0, 100, 6}, + { 0xFFFF, 0, 0, 0, 0, 0}, +}; + +static const struct dib0090_config tfe8096p_dib0090_config = { + .io.clock_khz = 12000, + .io.pll_bypass = 0, + .io.pll_range = 0, + .io.pll_prediv = 3, + .io.pll_loopdiv = 6, + .io.adc_clock_ratio = 0, + .io.pll_int_loop_filt = 0, + .reset = dib8096p_tuner_sleep, + .sleep = dib8096p_tuner_sleep, + + .freq_offset_khz_uhf = -143, + .freq_offset_khz_vhf = -143, + + .get_adc_power = dib8090_get_adc_power, + + .clkouttobamse = 1, + .analog_output = 0, + + .wbd_vhf_offset = 0, + .wbd_cband_offset = 0, + .use_pwm_agc = 1, + .clkoutdrive = 0, + + .fref_clock_ratio = 1, + + .wbd = dib8096p_wbd_table, + + .ls_cfg_pad_drv = 0, + .data_tx_drv = 0, + .low_if = NULL, + .in_soc = 1, + .force_cband_input = 0, +}; + +struct dibx090p_adc { + u32 freq; /* RF freq MHz */ + u32 timf; /* New Timf */ + u32 pll_loopdiv; /* New prediv */ + u32 pll_prediv; /* New loopdiv */ +}; + +struct dibx090p_best_adc { + u32 timf; + u32 pll_loopdiv; + u32 pll_prediv; +}; + +static int dib8096p_get_best_sampling(struct dvb_frontend *fe, struct dibx090p_best_adc *adc) +{ + u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1; + u16 xtal = 12000; + u16 fcp_min = 1900; /* PLL, Minimum Frequency of phase comparator (KHz) */ + u16 fcp_max = 20000; /* PLL, Maximum Frequency of phase comparator (KHz) */ + u32 fmem_max = 140000; /* 140MHz max SDRAM freq */ + u32 fdem_min = 66000; + u32 fcp = 0, fs = 0, fdem = 0, fmem = 0; + u32 harmonic_id = 0; + + adc->timf = 0; + adc->pll_loopdiv = loopdiv; + adc->pll_prediv = prediv; + + deb_info("bandwidth = %d", fe->dtv_property_cache.bandwidth_hz); + + /* Find Min and Max prediv */ + while ((xtal / max_prediv) >= fcp_min) + max_prediv++; + + max_prediv--; + min_prediv = max_prediv; + while ((xtal / min_prediv) <= fcp_max) { + min_prediv--; + if (min_prediv == 1) + break; + } + deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv); + + min_prediv = 1; + + for (prediv = min_prediv; prediv < max_prediv; prediv++) { + fcp = xtal / prediv; + if (fcp > fcp_min && fcp < fcp_max) { + for (loopdiv = 1; loopdiv < 64; loopdiv++) { + fmem = ((xtal/prediv) * loopdiv); + fdem = fmem / 2; + fs = fdem / 4; + + /* test min/max system restrictions */ + if ((fdem >= fdem_min) && (fmem <= fmem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz / 1000)) { + spur = 0; + /* test fs harmonics positions */ + for (harmonic_id = (fe->dtv_property_cache.frequency / (1000 * fs)); harmonic_id <= ((fe->dtv_property_cache.frequency / (1000 * fs)) + 1); harmonic_id++) { + if (((fs * harmonic_id) >= (fe->dtv_property_cache.frequency / 1000 - (fe->dtv_property_cache.bandwidth_hz / 2000))) && ((fs * harmonic_id) <= (fe->dtv_property_cache.frequency / 1000 + (fe->dtv_property_cache.bandwidth_hz / 2000)))) { + spur = 1; + break; + } + } + + if (!spur) { + adc->pll_loopdiv = loopdiv; + adc->pll_prediv = prediv; + adc->timf = (4260880253U / fdem) * (1 << 8); + adc->timf += ((4260880253U % fdem) << 8) / fdem; + + deb_info("RF %6d; BW %6d; Xtal %6d; Fmem %6d; Fdem %6d; Fs %6d; Prediv %2d; Loopdiv %2d; Timf %8d;", fe->dtv_property_cache.frequency, fe->dtv_property_cache.bandwidth_hz, xtal, fmem, fdem, fs, prediv, loopdiv, adc->timf); + break; + } + } + } + } + if (!spur) + break; + } + + if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0) + return -EINVAL; + return 0; +} + +static int dib8096p_agc_startup(struct dvb_frontend *fe) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + struct dibx000_bandwidth_config pll; + struct dibx090p_best_adc adc; + u16 target; + int ret; + + ret = state->set_param_save(fe); + if (ret < 0) + return ret; + memset(&pll, 0, sizeof(struct dibx000_bandwidth_config)); + + dib0090_pwm_gain_reset(fe); + /* dib0090_get_wbd_target is returning any possible + temperature compensated wbd-target */ + target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2; + dib8000_set_wbd_ref(fe, target); + + if (dib8096p_get_best_sampling(fe, &adc) == 0) { + pll.pll_ratio = adc.pll_loopdiv; + pll.pll_prediv = adc.pll_prediv; + + dib0700_set_i2c_speed(adap->dev, 200); + dib8000_update_pll(fe, &pll, fe->dtv_property_cache.bandwidth_hz / 1000, 0); + dib8000_ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf); + dib0700_set_i2c_speed(adap->dev, 1000); + } + return 0; +} + +static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + u32 fw_version; + + dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL); + if (fw_version >= 0x10200) + st->fw_use_new_i2c_api = 1; + + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(20); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80, 1); + + adap->fe_adap[0].fe = dvb_attach(dib8000_attach, + &adap->dev->i2c_adap, 0x80, &tfe8096p_dib8000_config); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int tfe8096p_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib8096p_get_i2c_tuner(adap->fe_adap[0].fe); + + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, + &tfe8096p_dib0090_config) == NULL) + return -ENODEV; + + dib8000_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096p_agc_startup; + return 0; +} + +/* STK9090M */ +static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff) +{ + return dib9000_fw_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); +} + +static int dib90x0_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) +{ + return dib9000_fw_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); +} + +static int dib90x0_tuner_reset(struct dvb_frontend *fe, int onoff) +{ + return dib9000_set_gpio(fe, 5, 0, !onoff); +} + +static int dib90x0_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + return dib9000_set_gpio(fe, 0, 0, onoff); +} + +static int dib01x0_pmu_update(struct i2c_adapter *i2c, u16 *data, u8 len) +{ + u8 wb[4] = { 0xc >> 8, 0xc & 0xff, 0, 0 }; + u8 rb[2]; + struct i2c_msg msg[2] = { + {.addr = 0x1e >> 1, .flags = 0, .buf = wb, .len = 2}, + {.addr = 0x1e >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2}, + }; + u8 index_data; + + dibx000_i2c_set_speed(i2c, 250); + + if (i2c_transfer(i2c, msg, 2) != 2) + return -EIO; + + switch (rb[0] << 8 | rb[1]) { + case 0: + deb_info("Found DiB0170 rev1: This version of DiB0170 is not supported any longer.\n"); + return -EIO; + case 1: + deb_info("Found DiB0170 rev2"); + break; + case 2: + deb_info("Found DiB0190 rev2"); + break; + default: + deb_info("DiB01x0 not found"); + return -EIO; + } + + for (index_data = 0; index_data < len; index_data += 2) { + wb[2] = (data[index_data + 1] >> 8) & 0xff; + wb[3] = (data[index_data + 1]) & 0xff; + + if (data[index_data] == 0) { + wb[0] = (data[index_data] >> 8) & 0xff; + wb[1] = (data[index_data]) & 0xff; + msg[0].len = 2; + if (i2c_transfer(i2c, msg, 2) != 2) + return -EIO; + wb[2] |= rb[0]; + wb[3] |= rb[1] & ~(3 << 4); + } + + wb[0] = (data[index_data] >> 8)&0xff; + wb[1] = (data[index_data])&0xff; + msg[0].len = 4; + if (i2c_transfer(i2c, &msg[0], 1) != 1) + return -EIO; + } + return 0; +} + +static struct dib9000_config stk9090m_config = { + .output_mpeg2_in_188_bytes = 1, + .output_mode = OUTMODE_MPEG2_FIFO, + .vcxo_timer = 279620, + .timing_frequency = 20452225, + .demod_clock_khz = 60000, + .xtal_clock_khz = 30000, + .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0), + .subband = { + 2, + { + { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0008 } }, /* GPIO 3 to 1 for VHF */ + { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0000 } }, /* GPIO 3 to 0 for UHF */ + { 0 }, + }, + }, + .gpio_function = { + { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 }, + { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 }, + }, +}; + +static struct dib9000_config nim9090md_config[2] = { + { + .output_mpeg2_in_188_bytes = 1, + .output_mode = OUTMODE_MPEG2_FIFO, + .vcxo_timer = 279620, + .timing_frequency = 20452225, + .demod_clock_khz = 60000, + .xtal_clock_khz = 30000, + .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0), + }, { + .output_mpeg2_in_188_bytes = 1, + .output_mode = OUTMODE_DIVERSITY, + .vcxo_timer = 279620, + .timing_frequency = 20452225, + .demod_clock_khz = 60000, + .xtal_clock_khz = 30000, + .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0), + .subband = { + 2, + { + { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0006 } }, /* GPIO 1 and 2 to 1 for VHF */ + { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0000 } }, /* GPIO 1 and 2 to 0 for UHF */ + { 0 }, + }, + }, + .gpio_function = { + { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 }, + { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 }, + }, + } +}; + +static struct dib0090_config dib9090_dib0090_config = { + .io.pll_bypass = 0, + .io.pll_range = 1, + .io.pll_prediv = 1, + .io.pll_loopdiv = 8, + .io.adc_clock_ratio = 8, + .io.pll_int_loop_filt = 0, + .io.clock_khz = 30000, + .reset = dib90x0_tuner_reset, + .sleep = dib90x0_tuner_sleep, + .clkouttobamse = 0, + .analog_output = 0, + .use_pwm_agc = 0, + .clkoutdrive = 0, + .freq_offset_khz_uhf = 0, + .freq_offset_khz_vhf = 0, +}; + +static struct dib0090_config nim9090md_dib0090_config[2] = { + { + .io.pll_bypass = 0, + .io.pll_range = 1, + .io.pll_prediv = 1, + .io.pll_loopdiv = 8, + .io.adc_clock_ratio = 8, + .io.pll_int_loop_filt = 0, + .io.clock_khz = 30000, + .reset = dib90x0_tuner_reset, + .sleep = dib90x0_tuner_sleep, + .clkouttobamse = 1, + .analog_output = 0, + .use_pwm_agc = 0, + .clkoutdrive = 0, + .freq_offset_khz_uhf = 0, + .freq_offset_khz_vhf = 0, + }, { + .io.pll_bypass = 0, + .io.pll_range = 1, + .io.pll_prediv = 1, + .io.pll_loopdiv = 8, + .io.adc_clock_ratio = 8, + .io.pll_int_loop_filt = 0, + .io.clock_khz = 30000, + .reset = dib90x0_tuner_reset, + .sleep = dib90x0_tuner_sleep, + .clkouttobamse = 0, + .analog_output = 0, + .use_pwm_agc = 0, + .clkoutdrive = 0, + .freq_offset_khz_uhf = 0, + .freq_offset_khz_vhf = 0, + } +}; + + +static int stk9090m_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *state = adap->priv; + struct dib0700_state *st = adap->dev->priv; + u32 fw_version; + + /* Make use of the new i2c functions from FW 1.20 */ + dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL); + if (fw_version >= 0x10200) + st->fw_use_new_i2c_api = 1; + dib0700_set_i2c_speed(adap->dev, 340); + + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(20); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80); + + if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) { + deb_info("%s: Upload failed. (file not found?)\n", __func__); + return -ENODEV; + } else { + deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size); + } + stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size; + stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data; + + adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int dib9090_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *state = adap->priv; + struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe); + u16 data_dib190[10] = { + 1, 0x1374, + 2, 0x01a2, + 7, 0x0020, + 0, 0x00ef, + 8, 0x0486, + }; + + if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL) + return -ENODEV; + i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0); + if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0) + return -ENODEV; + dib0700_set_i2c_speed(adap->dev, 1500); + if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0) + return -ENODEV; + release_firmware(state->frontend_firmware); + return 0; +} + +static int nim9090md_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *state = adap->priv; + struct dib0700_state *st = adap->dev->priv; + struct i2c_adapter *i2c; + struct dvb_frontend *fe_slave; + u32 fw_version; + + /* Make use of the new i2c functions from FW 1.20 */ + dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL); + if (fw_version >= 0x10200) + st->fw_use_new_i2c_api = 1; + dib0700_set_i2c_speed(adap->dev, 340); + + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(20); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) { + deb_info("%s: Upload failed. (file not found?)\n", __func__); + return -EIO; + } else { + deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size); + } + nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size; + nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data; + nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size; + nim9090md_config[1].microcode_B_fe_buffer = state->frontend_firmware->data; + + dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, 0x80); + adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]); + + if (adap->fe_adap[0].fe == NULL) + return -ENODEV; + + i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0); + dib9000_i2c_enumeration(i2c, 1, 0x12, 0x82); + + fe_slave = dvb_attach(dib9000_attach, i2c, 0x82, &nim9090md_config[1]); + dib9000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave); + + return fe_slave == NULL ? -ENODEV : 0; +} + +static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *state = adap->priv; + struct i2c_adapter *i2c; + struct dvb_frontend *fe_slave; + u16 data_dib190[10] = { + 1, 0x5374, + 2, 0x01ae, + 7, 0x0020, + 0, 0x00ef, + 8, 0x0406, + }; + i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe); + if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL) + return -ENODEV; + i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0); + if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0) + return -ENODEV; + + dib0700_set_i2c_speed(adap->dev, 1500); + if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0) + return -ENODEV; + + fe_slave = dib9000_get_slave_frontend(adap->fe_adap[0].fe, 1); + if (fe_slave != NULL) { + i2c = dib9000_get_component_bus_interface(adap->fe_adap[0].fe); + dib9000_set_i2c_adapter(fe_slave, i2c); + + i2c = dib9000_get_tuner_interface(fe_slave); + if (dvb_attach(dib0090_fw_register, fe_slave, i2c, &nim9090md_dib0090_config[1]) == NULL) + return -ENODEV; + fe_slave->dvb = adap->fe_adap[0].fe->dvb; + dib9000_fw_set_component_bus_speed(adap->fe_adap[0].fe, 1500); + if (dib9000_firmware_post_pll_init(fe_slave) < 0) + return -ENODEV; + } + release_firmware(state->frontend_firmware); + + return 0; +} + +/* NIM7090 */ +static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dibx090p_best_adc *adc) +{ + u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1; + + u16 xtal = 12000; + u32 fcp_min = 1900; /* PLL Minimum Frequency comparator KHz */ + u32 fcp_max = 20000; /* PLL Maximum Frequency comparator KHz */ + u32 fdem_max = 76000; + u32 fdem_min = 69500; + u32 fcp = 0, fs = 0, fdem = 0; + u32 harmonic_id = 0; + + adc->pll_loopdiv = loopdiv; + adc->pll_prediv = prediv; + adc->timf = 0; + + deb_info("bandwidth = %d fdem_min =%d", fe->dtv_property_cache.bandwidth_hz, fdem_min); + + /* Find Min and Max prediv */ + while ((xtal/max_prediv) >= fcp_min) + max_prediv++; + + max_prediv--; + min_prediv = max_prediv; + while ((xtal/min_prediv) <= fcp_max) { + min_prediv--; + if (min_prediv == 1) + break; + } + deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv); + + min_prediv = 2; + + for (prediv = min_prediv ; prediv < max_prediv; prediv++) { + fcp = xtal / prediv; + if (fcp > fcp_min && fcp < fcp_max) { + for (loopdiv = 1 ; loopdiv < 64 ; loopdiv++) { + fdem = ((xtal/prediv) * loopdiv); + fs = fdem / 4; + /* test min/max system restrictions */ + + if ((fdem >= fdem_min) && (fdem <= fdem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz/1000)) { + spur = 0; + /* test fs harmonics positions */ + for (harmonic_id = (fe->dtv_property_cache.frequency / (1000*fs)) ; harmonic_id <= ((fe->dtv_property_cache.frequency / (1000*fs))+1) ; harmonic_id++) { + if (((fs*harmonic_id) >= ((fe->dtv_property_cache.frequency/1000) - (fe->dtv_property_cache.bandwidth_hz/2000))) && ((fs*harmonic_id) <= ((fe->dtv_property_cache.frequency/1000) + (fe->dtv_property_cache.bandwidth_hz/2000)))) { + spur = 1; + break; + } + } + + if (!spur) { + adc->pll_loopdiv = loopdiv; + adc->pll_prediv = prediv; + adc->timf = 2396745143UL/fdem*(1 << 9); + adc->timf += ((2396745143UL%fdem) << 9)/fdem; + deb_info("loopdiv=%i prediv=%i timf=%i", loopdiv, prediv, adc->timf); + break; + } + } + } + } + if (!spur) + break; + } + + + if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0) + return -EINVAL; + else + return 0; +} + +static int dib7090_agc_startup(struct dvb_frontend *fe) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + struct dibx000_bandwidth_config pll; + u16 target; + struct dibx090p_best_adc adc; + int ret; + + ret = state->set_param_save(fe); + if (ret < 0) + return ret; + + memset(&pll, 0, sizeof(struct dibx000_bandwidth_config)); + dib0090_pwm_gain_reset(fe); + target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2; + dib7000p_set_wbd_ref(fe, target); + + if (dib7090p_get_best_sampling(fe, &adc) == 0) { + pll.pll_ratio = adc.pll_loopdiv; + pll.pll_prediv = adc.pll_prediv; + + dib7000p_update_pll(fe, &pll); + dib7000p_ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf); + } + return 0; +} + +static int dib7090_agc_restart(struct dvb_frontend *fe, u8 restart) +{ + deb_info("AGC restart callback: %d", restart); + if (restart == 0) /* before AGC startup */ + dib0090_set_dc_servo(fe, 1); + return 0; +} + +static int tfe7790p_update_lna(struct dvb_frontend *fe, u16 agc_global) +{ + deb_info("update LNA: agc global=%i", agc_global); + + if (agc_global < 25000) { + dib7000p_set_gpio(fe, 8, 0, 0); + dib7000p_set_agc1_min(fe, 0); + } else { + dib7000p_set_gpio(fe, 8, 0, 1); + dib7000p_set_agc1_min(fe, 32768); + } + + return 0; +} + +static struct dib0090_wbd_slope dib7090_wbd_table[] = { + { 380, 81, 850, 64, 540, 4}, + { 860, 51, 866, 21, 375, 4}, + {1700, 0, 250, 0, 100, 6}, + {2600, 0, 250, 0, 100, 6}, + { 0xFFFF, 0, 0, 0, 0, 0}, +}; + +static struct dibx000_agc_config dib7090_agc_config[2] = { + { + .band_caps = BAND_UHF, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ + .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + + .inv_gain = 687, + .time_stabiliz = 10, + + .alpha_level = 0, + .thlock = 118, + + .wbd_inv = 0, + .wbd_ref = 1200, + .wbd_sel = 3, + .wbd_alpha = 5, + + .agc1_max = 65535, + .agc1_min = 32768, + + .agc2_max = 65535, + .agc2_min = 0, + + .agc1_pt1 = 0, + .agc1_pt2 = 32, + .agc1_pt3 = 114, + .agc1_slope1 = 143, + .agc1_slope2 = 144, + .agc2_pt1 = 114, + .agc2_pt2 = 227, + .agc2_slope1 = 116, + .agc2_slope2 = 117, + + .alpha_mant = 18, + .alpha_exp = 0, + .beta_mant = 20, + .beta_exp = 59, + + .perform_agc_softsplit = 0, + } , { + .band_caps = BAND_FM | BAND_VHF | BAND_CBAND, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ + .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + + .inv_gain = 732, + .time_stabiliz = 10, + + .alpha_level = 0, + .thlock = 118, + + .wbd_inv = 0, + .wbd_ref = 1200, + .wbd_sel = 3, + .wbd_alpha = 5, + + .agc1_max = 65535, + .agc1_min = 0, + + .agc2_max = 65535, + .agc2_min = 0, + + .agc1_pt1 = 0, + .agc1_pt2 = 0, + .agc1_pt3 = 98, + .agc1_slope1 = 0, + .agc1_slope2 = 167, + .agc2_pt1 = 98, + .agc2_pt2 = 255, + .agc2_slope1 = 104, + .agc2_slope2 = 0, + + .alpha_mant = 18, + .alpha_exp = 0, + .beta_mant = 20, + .beta_exp = 59, + + .perform_agc_softsplit = 0, + } +}; + +static struct dibx000_bandwidth_config dib7090_clock_config_12_mhz = { + 60000, 15000, + 1, 5, 0, 0, 0, + 0, 0, 1, 1, 2, + (3 << 14) | (1 << 12) | (524 << 0), + (0 << 25) | 0, + 20452225, + 15000000, +}; + +static struct dib7000p_config nim7090_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 1, + .update_lna = tfe7790p_update_lna, /* GPIO used is the same as TFE7790 */ + + .agc_config_count = 2, + .agc = dib7090_agc_config, + + .bw = &dib7090_clock_config_12_mhz, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + + .agc_control = dib7090_agc_restart, + + .spur_protect = 0, + .disable_sample_and_hold = 0, + .enable_current_mirror = 0, + .diversity_delay = 0, + + .output_mode = OUTMODE_MPEG2_FIFO, + .enMpegOutput = 1, +}; + +static int tfe7090p_pvr_update_lna(struct dvb_frontend *fe, u16 agc_global) +{ + deb_info("TFE7090P-PVR update LNA: agc global=%i", agc_global); + if (agc_global < 25000) { + dib7000p_set_gpio(fe, 5, 0, 0); + dib7000p_set_agc1_min(fe, 0); + } else { + dib7000p_set_gpio(fe, 5, 0, 1); + dib7000p_set_agc1_min(fe, 32768); + } + + return 0; +} + +static struct dib7000p_config tfe7090pvr_dib7000p_config[2] = { + { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 1, + .update_lna = tfe7090p_pvr_update_lna, + + .agc_config_count = 2, + .agc = dib7090_agc_config, + + .bw = &dib7090_clock_config_12_mhz, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + + .agc_control = dib7090_agc_restart, + + .spur_protect = 0, + .disable_sample_and_hold = 0, + .enable_current_mirror = 0, + .diversity_delay = 0, + + .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, + .default_i2c_addr = 0x90, + .enMpegOutput = 1, + }, { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 1, + .update_lna = tfe7090p_pvr_update_lna, + + .agc_config_count = 2, + .agc = dib7090_agc_config, + + .bw = &dib7090_clock_config_12_mhz, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + + .agc_control = dib7090_agc_restart, + + .spur_protect = 0, + .disable_sample_and_hold = 0, + .enable_current_mirror = 0, + .diversity_delay = 0, + + .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, + .default_i2c_addr = 0x92, + .enMpegOutput = 0, + } +}; + +static const struct dib0090_config nim7090_dib0090_config = { + .io.clock_khz = 12000, + .io.pll_bypass = 0, + .io.pll_range = 0, + .io.pll_prediv = 3, + .io.pll_loopdiv = 6, + .io.adc_clock_ratio = 0, + .io.pll_int_loop_filt = 0, + .reset = dib7090_tuner_sleep, + .sleep = dib7090_tuner_sleep, + + .freq_offset_khz_uhf = 0, + .freq_offset_khz_vhf = 0, + + .get_adc_power = dib7090_get_adc_power, + + .clkouttobamse = 1, + .analog_output = 0, + + .wbd_vhf_offset = 0, + .wbd_cband_offset = 0, + .use_pwm_agc = 1, + .clkoutdrive = 0, + + .fref_clock_ratio = 0, + + .wbd = dib7090_wbd_table, + + .ls_cfg_pad_drv = 0, + .data_tx_drv = 0, + .low_if = NULL, + .in_soc = 1, +}; + +static struct dib7000p_config tfe7790p_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 1, + .update_lna = tfe7790p_update_lna, + + .agc_config_count = 2, + .agc = dib7090_agc_config, + + .bw = &dib7090_clock_config_12_mhz, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + + .agc_control = dib7090_agc_restart, + + .spur_protect = 0, + .disable_sample_and_hold = 0, + .enable_current_mirror = 0, + .diversity_delay = 0, + + .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, + .enMpegOutput = 1, +}; + +static const struct dib0090_config tfe7790p_dib0090_config = { + .io.clock_khz = 12000, + .io.pll_bypass = 0, + .io.pll_range = 0, + .io.pll_prediv = 3, + .io.pll_loopdiv = 6, + .io.adc_clock_ratio = 0, + .io.pll_int_loop_filt = 0, + .reset = dib7090_tuner_sleep, + .sleep = dib7090_tuner_sleep, + + .freq_offset_khz_uhf = 0, + .freq_offset_khz_vhf = 0, + + .get_adc_power = dib7090_get_adc_power, + + .clkouttobamse = 1, + .analog_output = 0, + + .wbd_vhf_offset = 0, + .wbd_cband_offset = 0, + .use_pwm_agc = 1, + .clkoutdrive = 0, + + .fref_clock_ratio = 0, + + .wbd = dib7090_wbd_table, + + .ls_cfg_pad_drv = 0, + .data_tx_drv = 0, + .low_if = NULL, + .in_soc = 1, + .force_cband_input = 0, + .is_dib7090e = 0, + .force_crystal_mode = 1, +}; + +static const struct dib0090_config tfe7090pvr_dib0090_config[2] = { + { + .io.clock_khz = 12000, + .io.pll_bypass = 0, + .io.pll_range = 0, + .io.pll_prediv = 3, + .io.pll_loopdiv = 6, + .io.adc_clock_ratio = 0, + .io.pll_int_loop_filt = 0, + .reset = dib7090_tuner_sleep, + .sleep = dib7090_tuner_sleep, + + .freq_offset_khz_uhf = 50, + .freq_offset_khz_vhf = 70, + + .get_adc_power = dib7090_get_adc_power, + + .clkouttobamse = 1, + .analog_output = 0, + + .wbd_vhf_offset = 0, + .wbd_cband_offset = 0, + .use_pwm_agc = 1, + .clkoutdrive = 0, + + .fref_clock_ratio = 0, + + .wbd = dib7090_wbd_table, + + .ls_cfg_pad_drv = 0, + .data_tx_drv = 0, + .low_if = NULL, + .in_soc = 1, + }, { + .io.clock_khz = 12000, + .io.pll_bypass = 0, + .io.pll_range = 0, + .io.pll_prediv = 3, + .io.pll_loopdiv = 6, + .io.adc_clock_ratio = 0, + .io.pll_int_loop_filt = 0, + .reset = dib7090_tuner_sleep, + .sleep = dib7090_tuner_sleep, + + .freq_offset_khz_uhf = -50, + .freq_offset_khz_vhf = -70, + + .get_adc_power = dib7090_get_adc_power, + + .clkouttobamse = 1, + .analog_output = 0, + + .wbd_vhf_offset = 0, + .wbd_cband_offset = 0, + .use_pwm_agc = 1, + .clkoutdrive = 0, + + .fref_clock_ratio = 0, + + .wbd = dib7090_wbd_table, + + .ls_cfg_pad_drv = 0, + .data_tx_drv = 0, + .low_if = NULL, + .in_soc = 1, + } +}; + +static int nim7090_frontend_attach(struct dvb_usb_adapter *adap) +{ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + msleep(20); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); + return -ENODEV; + } + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int nim7090_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe); + + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &nim7090_dib0090_config) == NULL) + return -ENODEV; + + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; + return 0; +} + +static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* The TFE7090 requires the dib0700 to not be in master mode */ + st->disable_streaming_master_mode = 1; + + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + msleep(20); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + /* initialize IC 0 */ + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); + return -ENODEV; + } + + dib0700_set_i2c_speed(adap->dev, 340); + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]); + if (adap->fe_adap[0].fe == NULL) + return -ENODEV; + + dib7090_slave_reset(adap->fe_adap[0].fe); + + return 0; +} + +static int tfe7090pvr_frontend1_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *i2c; + + if (adap->dev->adapter[0].fe_adap[0].fe == NULL) { + err("the master dib7090 has to be initialized first"); + return -ENODEV; /* the master device has not been initialized */ + } + + i2c = dib7000p_get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1); + if (dib7000p_i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); + return -ENODEV; + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, i2c, 0x92, &tfe7090pvr_dib7000p_config[1]); + dib0700_set_i2c_speed(adap->dev, 200); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int tfe7090pvr_tuner0_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe); + + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL) + return -ENODEV; + + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; + return 0; +} + +static int tfe7090pvr_tuner1_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe); + + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL) + return -ENODEV; + + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; + return 0; +} + +static int tfe7790p_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* The TFE7790P requires the dib0700 to not be in master mode */ + st->disable_streaming_master_mode = 1; + + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(20); + dib0700_ctrl_clock(adap->dev, 72, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, + 1, 0x10, &tfe7790p_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, + 0x80, &tfe7790p_dib7000p_config); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int tfe7790p_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = + dib7090_get_i2c_tuner(adap->fe_adap[0].fe); + + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, + &tfe7790p_dib0090_config) == NULL) + return -ENODEV; + + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; + return 0; +} + +/* STK7070PD */ +static struct dib7000p_config stk7070pd_dib7000p_config[2] = { + { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &dib7070_agc_config, + .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + }, { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &dib7070_agc_config, + .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + } +}; + +static void stk7070pd_init(struct dvb_usb_device *dev) +{ + dib0700_set_gpio(dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(dev, 72, 1); + + msleep(10); + dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 1); +} + +static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap) +{ + stk7070pd_init(adap->dev); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, + stk7070pd_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]); + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap) +{ + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]); + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int novatd_read_status_override(struct dvb_frontend *fe, + fe_status_t *stat) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dvb_usb_device *dev = adap->dev; + struct dib0700_state *state = dev->priv; + int ret; + + ret = state->read_status(fe, stat); + + if (!ret) + dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, + !!(*stat & FE_HAS_LOCK)); + + return ret; +} + +static int novatd_sleep_override(struct dvb_frontend* fe) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dvb_usb_device *dev = adap->dev; + struct dib0700_state *state = dev->priv; + + /* turn off LED */ + dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, 0); + + return state->sleep(fe); +} + +/** + * novatd_frontend_attach - Nova-TD specific attach + * + * Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for + * information purposes. + */ +static int novatd_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *dev = adap->dev; + struct dib0700_state *st = dev->priv; + + if (adap->id == 0) { + stk7070pd_init(dev); + + /* turn the power LED on, the other two off (just in case) */ + dib0700_set_gpio(dev, GPIO0, GPIO_OUT, 0); + dib0700_set_gpio(dev, GPIO1, GPIO_OUT, 0); + dib0700_set_gpio(dev, GPIO2, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&dev->i2c_adap, 2, 18, + stk7070pd_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &dev->i2c_adap, + adap->id == 0 ? 0x80 : 0x82, + &stk7070pd_dib7000p_config[adap->id]); + + if (adap->fe_adap[0].fe == NULL) + return -ENODEV; + + st->read_status = adap->fe_adap[0].fe->ops.read_status; + adap->fe_adap[0].fe->ops.read_status = novatd_read_status_override; + st->sleep = adap->fe_adap[0].fe->ops.sleep; + adap->fe_adap[0].fe->ops.sleep = novatd_sleep_override; + + return 0; +} + +/* S5H1411 */ +static struct s5h1411_config pinnacle_801e_config = { + .output_mode = S5H1411_PARALLEL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK, + .qam_if = S5H1411_IF_44000, + .vsb_if = S5H1411_IF_44000, + .inversion = S5H1411_INVERSION_OFF, + .status_mode = S5H1411_DEMODLOCKING +}; + +/* Pinnacle PCTV HD Pro 801e GPIOs map: + GPIO0 - currently unknown + GPIO1 - xc5000 tuner reset + GPIO2 - CX25843 sleep + GPIO3 - currently unknown + GPIO4 - currently unknown + GPIO6 - currently unknown + GPIO7 - currently unknown + GPIO9 - currently unknown + GPIO10 - CX25843 reset + */ +static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* Make use of the new i2c functions from FW 1.20 */ + st->fw_use_new_i2c_api = 1; + + /* The s5h1411 requires the dib0700 to not be in master mode */ + st->disable_streaming_master_mode = 1; + + /* All msleep values taken from Windows USB trace */ + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); + dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(400); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(60); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0); + msleep(30); + + /* Put the CX25843 to sleep for now since we're in digital mode */ + dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); + + /* GPIOs are initialized, do the attach */ + adap->fe_adap[0].fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config, + &adap->dev->i2c_adap); + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int dib0700_xc5000_tuner_callback(void *priv, int component, + int command, int arg) +{ + struct dvb_usb_adapter *adap = priv; + + if (command == XC5000_TUNER_RESET) { + /* Reset the tuner */ + dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1); + msleep(10); + } else { + err("xc5000: unknown tuner callback command: %d\n", command); + return -EINVAL; + } + + return 0; +} + +static struct xc5000_config s5h1411_xc5000_tunerconfig = { + .i2c_address = 0x64, + .if_khz = 5380, +}; + +static int xc5000_tuner_attach(struct dvb_usb_adapter *adap) +{ + /* FIXME: generalize & move to common area */ + adap->fe_adap[0].fe->callback = dib0700_xc5000_tuner_callback; + + return dvb_attach(xc5000_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, + &s5h1411_xc5000_tunerconfig) + == NULL ? -ENODEV : 0; +} + +static int dib0700_xc4000_tuner_callback(void *priv, int component, + int command, int arg) +{ + struct dvb_usb_adapter *adap = priv; + + if (command == XC4000_TUNER_RESET) { + /* Reset the tuner */ + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0); + msleep(10); + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + } else { + err("xc4000: unknown tuner callback command: %d\n", command); + return -EINVAL; + } + + return 0; +} + +static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = { + .band_caps = BAND_UHF | BAND_VHF, + .setup = 0x64, + .inv_gain = 0x02c8, + .time_stabiliz = 0x15, + .alpha_level = 0x00, + .thlock = 0x76, + .wbd_inv = 0x01, + .wbd_ref = 0x0b33, + .wbd_sel = 0x00, + .wbd_alpha = 0x02, + .agc1_max = 0x00, + .agc1_min = 0x00, + .agc2_max = 0x9b26, + .agc2_min = 0x26ca, + .agc1_pt1 = 0x00, + .agc1_pt2 = 0x00, + .agc1_pt3 = 0x00, + .agc1_slope1 = 0x00, + .agc1_slope2 = 0x00, + .agc2_pt1 = 0x00, + .agc2_pt2 = 0x80, + .agc2_slope1 = 0x1d, + .agc2_slope2 = 0x1d, + .alpha_mant = 0x11, + .alpha_exp = 0x1b, + .beta_mant = 0x17, + .beta_exp = 0x33, + .perform_agc_softsplit = 0x00, +}; + +static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = { + 60000, 30000, /* internal, sampling */ + 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */ + 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, */ + /* ADClkSrc, modulo */ + (3 << 14) | (1 << 12) | 524, /* sad_cfg: refsel, sel, freq_15k */ + 39370534, /* ifreq */ + 20452225, /* timf */ + 30000000 /* xtal */ +}; + +/* FIXME: none of these inputs are validated yet */ +static struct dib7000p_config pctv_340e_config = { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &stk7700p_7000p_xc4000_agc_config, + .bw = &stk7700p_xc4000_pll_config, + + .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, +}; + +/* PCTV 340e GPIOs map: + dib0700: + GPIO2 - CX25843 sleep + GPIO3 - CS5340 reset + GPIO5 - IRD + GPIO6 - Power Supply + GPIO8 - LNA (1=off 0=on) + GPIO10 - CX25843 reset + dib7000: + GPIO8 - xc4000 reset + */ +static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* Power Supply on */ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + msleep(50); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(100); /* Allow power supply to settle before probing */ + + /* cx25843 reset */ + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(1); /* cx25843 datasheet say 350us required */ + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + + /* LNA off for now */ + dib0700_set_gpio(adap->dev, GPIO8, GPIO_OUT, 1); + + /* Put the CX25843 to sleep for now since we're in digital mode */ + dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); + + /* FIXME: not verified yet */ + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(500); + + if (dib7000pc_detection(&adap->dev->i2c_adap) == 0) { + /* Demodulator not found for some reason? */ + return -ENODEV; + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x12, + &pctv_340e_config); + st->is_dib7000pc = 1; + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static struct xc4000_config dib7000p_xc4000_tunerconfig = { + .i2c_address = 0x61, + .default_pm = 1, + .dvb_amplitude = 0, + .set_smoothedcvbs = 0, + .if_khz = 5400 +}; + +static int xc4000_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *tun_i2c; + + /* The xc4000 is not on the main i2c bus */ + tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + if (tun_i2c == NULL) { + printk(KERN_ERR "Could not reach tuner i2c bus\n"); + return 0; + } + + /* Setup the reset callback */ + adap->fe_adap[0].fe->callback = dib0700_xc4000_tuner_callback; + + return dvb_attach(xc4000_attach, adap->fe_adap[0].fe, tun_i2c, + &dib7000p_xc4000_tunerconfig) + == NULL ? -ENODEV : 0; +} + +static struct lgdt3305_config hcw_lgdt3305_config = { + .i2c_addr = 0x0e, + .mpeg_mode = LGDT3305_MPEG_PARALLEL, + .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, + .tpvalid_polarity = LGDT3305_TP_VALID_LOW, + .deny_i2c_rptr = 0, + .spectral_inversion = 1, + .qam_if_khz = 6000, + .vsb_if_khz = 6000, + .usref_8vsb = 0x0500, +}; + +static struct mxl5007t_config hcw_mxl5007t_config = { + .xtal_freq_hz = MxL_XTAL_25_MHZ, + .if_freq_hz = MxL_IF_6_MHZ, + .invert_if = 1, +}; + +/* TIGER-ATSC map: + GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled) + GPIO1 - ANT_SEL (H: VPA, L: MCX) + GPIO4 - SCL2 + GPIO6 - EN_TUNER + GPIO7 - SDA2 + GPIO10 - DEM_RST + + MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB + */ +static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* Make use of the new i2c functions from FW 1.20 */ + st->fw_use_new_i2c_api = 1; + + st->disable_streaming_master_mode = 1; + + /* fe power enable */ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(30); + + /* demod reset */ + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(30); + + adap->fe_adap[0].fe = dvb_attach(lgdt3305_attach, + &hcw_lgdt3305_config, + &adap->dev->i2c_adap); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap) +{ + return dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe, + &adap->dev->i2c_adap, 0x60, + &hcw_mxl5007t_config) == NULL ? -ENODEV : 0; +} + + +/* DVB-USB and USB stuff follows */ +struct usb_device_id dib0700_usb_id_table[] = { +/* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) }, +/* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) }, + { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) }, + { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) }, + { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) }, +/* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) }, + { USB_DEVICE(USB_VID_TERRATEC, + USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) }, +/* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) }, + { USB_DEVICE(USB_VID_PINNACLE, + USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) }, + { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) }, +/* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) }, + { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) }, + { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) }, + { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) }, + { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) }, +/* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) }, +/* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) }, + { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) }, + { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) }, +/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) }, + { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, + { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, + { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, +/* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) }, + { USB_DEVICE(USB_VID_TERRATEC, + USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) }, + { USB_DEVICE(USB_VID_SONY, USB_PID_SONY_PLAYTV) }, +/* 45 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_PD378S) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) }, + { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) }, + { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) }, +/* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) }, + { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) }, + { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D) }, +/* 55 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73A) }, + { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV73ESE) }, + { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV282E) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7770P) }, +/* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) }, + { USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) }, + { USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) }, +/* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096GP) }, + { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DIVERSITY) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090M) }, +/* 70 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM8096MD) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090MD) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM7090) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7090PVR) }, + { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) }, +/* 75 */{ USB_DEVICE(USB_VID_MEDION, USB_PID_CREATIX_CTX1921) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E_SE) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7790P) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE8096P) }, +/* 80 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_2) }, + { 0 } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); + +#define DIB0700_DEFAULT_DEVICE_PROPERTIES \ + .caps = DVB_USB_IS_AN_I2C_ADAPTER, \ + .usb_ctrl = DEVICE_SPECIFIC, \ + .firmware = "dvb-usb-dib0700-1.20.fw", \ + .download_firmware = dib0700_download_firmware, \ + .no_reconnect = 1, \ + .size_of_priv = sizeof(struct dib0700_state), \ + .i2c_algo = &dib0700_i2c_algo, \ + .identify_state = dib0700_identify_state + +#define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \ + .streaming_ctrl = dib0700_streaming_ctrl, \ + .stream = { \ + .type = USB_BULK, \ + .count = 4, \ + .endpoint = ep, \ + .u = { \ + .bulk = { \ + .buffersize = 39480, \ + } \ + } \ + } + +struct dvb_usb_device_properties dib0700_devices[] = { + { + DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk7700p_pid_filter, + .pid_filter_ctrl = stk7700p_pid_filter_ctrl, + .frontend_attach = stk7700p_frontend_attach, + .tuner_attach = stk7700p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + }, + }, + + .num_device_descs = 8, + .devices = { + { "DiBcom STK7700P reference design", + { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] }, + { NULL }, + }, + { "Hauppauge Nova-T Stick", + { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL }, + { NULL }, + }, + { "AVerMedia AVerTV DVB-T Volar", + { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] }, + { NULL }, + }, + { "Compro Videomate U500", + { &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] }, + { NULL }, + }, + { "Uniwill STK7700P based (Hama and others)", + { &dib0700_usb_id_table[7], NULL }, + { NULL }, + }, + { "Leadtek Winfast DTV Dongle (STK7700P based)", + { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] }, + { NULL }, + }, + { "AVerMedia AVerTV DVB-T Express", + { &dib0700_usb_id_table[20] }, + { NULL }, + }, + { "Gigabyte U7000", + { &dib0700_usb_id_table[21], NULL }, + { NULL }, + } + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = bristol_frontend_attach, + .tuner_attach = bristol_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + }, { + .num_frontends = 1, + .fe = {{ + .frontend_attach = bristol_frontend_attach, + .tuner_attach = bristol_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + } + }, + + .num_device_descs = 1, + .devices = { + { "Hauppauge Nova-T 500 Dual DVB-T", + { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7700d_frontend_attach, + .tuner_attach = stk7700d_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + }, { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7700d_frontend_attach, + .tuner_attach = stk7700d_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + } + }, + + .num_device_descs = 5, + .devices = { + { "Pinnacle PCTV 2000e", + { &dib0700_usb_id_table[11], NULL }, + { NULL }, + }, + { "Terratec Cinergy DT XS Diversity", + { &dib0700_usb_id_table[12], NULL }, + { NULL }, + }, + { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity", + { &dib0700_usb_id_table[13], NULL }, + { NULL }, + }, + { "DiBcom STK7700D reference design", + { &dib0700_usb_id_table[14], NULL }, + { NULL }, + }, + { "YUAN High-Tech DiBcom STK7700D", + { &dib0700_usb_id_table[55], NULL }, + { NULL }, + }, + + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7700P2_frontend_attach, + .tuner_attach = stk7700d_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + }, + }, + + .num_device_descs = 3, + .devices = { + { "ASUS My Cinema U3000 Mini DVBT Tuner", + { &dib0700_usb_id_table[23], NULL }, + { NULL }, + }, + { "Yuan EC372S", + { &dib0700_usb_id_table[31], NULL }, + { NULL }, + }, + { "Terratec Cinergy T Express", + { &dib0700_usb_id_table[42], NULL }, + { NULL }, + } + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7070p_frontend_attach, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 12, + .devices = { + { "DiBcom STK7070P reference design", + { &dib0700_usb_id_table[15], NULL }, + { NULL }, + }, + { "Pinnacle PCTV DVB-T Flash Stick", + { &dib0700_usb_id_table[16], NULL }, + { NULL }, + }, + { "Artec T14BR DVB-T", + { &dib0700_usb_id_table[22], NULL }, + { NULL }, + }, + { "ASUS My Cinema U3100 Mini DVBT Tuner", + { &dib0700_usb_id_table[24], NULL }, + { NULL }, + }, + { "Hauppauge Nova-T Stick", + { &dib0700_usb_id_table[25], NULL }, + { NULL }, + }, + { "Hauppauge Nova-T MyTV.t", + { &dib0700_usb_id_table[26], NULL }, + { NULL }, + }, + { "Pinnacle PCTV 72e", + { &dib0700_usb_id_table[29], NULL }, + { NULL }, + }, + { "Pinnacle PCTV 73e", + { &dib0700_usb_id_table[30], NULL }, + { NULL }, + }, + { "Elgato EyeTV DTT", + { &dib0700_usb_id_table[49], NULL }, + { NULL }, + }, + { "Yuan PD378S", + { &dib0700_usb_id_table[45], NULL }, + { NULL }, + }, + { "Elgato EyeTV Dtt Dlx PD378S", + { &dib0700_usb_id_table[50], NULL }, + { NULL }, + }, + { "Elgato EyeTV DTT rev. 2", + { &dib0700_usb_id_table[80], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7070p_frontend_attach, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 3, + .devices = { + { "Pinnacle PCTV 73A", + { &dib0700_usb_id_table[56], NULL }, + { NULL }, + }, + { "Pinnacle PCTV 73e SE", + { &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL }, + { NULL }, + }, + { "Pinnacle PCTV 282e", + { &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = novatd_frontend_attach, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + }, { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = novatd_frontend_attach, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + } + }, + + .num_device_descs = 1, + .devices = { + { "Hauppauge Nova-TD Stick (52009)", + { &dib0700_usb_id_table[35], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7070pd_frontend_attach0, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + }, { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7070pd_frontend_attach1, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + } + }, + + .num_device_descs = 5, + .devices = { + { "DiBcom STK7070PD reference design", + { &dib0700_usb_id_table[17], NULL }, + { NULL }, + }, + { "Pinnacle PCTV Dual DVB-T Diversity Stick", + { &dib0700_usb_id_table[18], NULL }, + { NULL }, + }, + { "Hauppauge Nova-TD-500 (84xxx)", + { &dib0700_usb_id_table[36], NULL }, + { NULL }, + }, + { "Terratec Cinergy DT USB XS Diversity/ T5", + { &dib0700_usb_id_table[43], + &dib0700_usb_id_table[53], NULL}, + { NULL }, + }, + { "Sony PlayTV", + { &dib0700_usb_id_table[44], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7070pd_frontend_attach0, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + }, { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7070pd_frontend_attach1, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + } + }, + + .num_device_descs = 1, + .devices = { + { "Elgato EyeTV Diversity", + { &dib0700_usb_id_table[68], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_NEC_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7700ph_frontend_attach, + .tuner_attach = stk7700ph_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct + dib0700_adapter_state), + }, + }, + + .num_device_descs = 9, + .devices = { + { "Terratec Cinergy HT USB XE", + { &dib0700_usb_id_table[27], NULL }, + { NULL }, + }, + { "Pinnacle Expresscard 320cx", + { &dib0700_usb_id_table[28], NULL }, + { NULL }, + }, + { "Terratec Cinergy HT Express", + { &dib0700_usb_id_table[32], NULL }, + { NULL }, + }, + { "Gigabyte U8000-RH", + { &dib0700_usb_id_table[37], NULL }, + { NULL }, + }, + { "YUAN High-Tech STK7700PH", + { &dib0700_usb_id_table[38], NULL }, + { NULL }, + }, + { "Asus My Cinema-U3000Hybrid", + { &dib0700_usb_id_table[39], NULL }, + { NULL }, + }, + { "YUAN High-Tech MC770", + { &dib0700_usb_id_table[48], NULL }, + { NULL }, + }, + { "Leadtek WinFast DTV Dongle H", + { &dib0700_usb_id_table[51], NULL }, + { NULL }, + }, + { "YUAN High-Tech STK7700D", + { &dib0700_usb_id_table[54], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = s5h1411_frontend_attach, + .tuner_attach = xc5000_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct + dib0700_adapter_state), + }, + }, + + .num_device_descs = 2, + .devices = { + { "Pinnacle PCTV HD Pro USB Stick", + { &dib0700_usb_id_table[40], NULL }, + { NULL }, + }, + { "Pinnacle PCTV HD USB Stick", + { &dib0700_usb_id_table[41], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = lgdt3305_frontend_attach, + .tuner_attach = mxl5007t_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct + dib0700_adapter_state), + }, + }, + + .num_device_descs = 2, + .devices = { + { "Hauppauge ATSC MiniCard (B200)", + { &dib0700_usb_id_table[46], NULL }, + { NULL }, + }, + { "Hauppauge ATSC MiniCard (B210)", + { &dib0700_usb_id_table[47], NULL }, + { NULL }, + }, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7770p_frontend_attach, + .tuner_attach = dib7770p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 4, + .devices = { + { "DiBcom STK7770P reference design", + { &dib0700_usb_id_table[59], NULL }, + { NULL }, + }, + { "Terratec Cinergy T USB XXS (HD)/ T3", + { &dib0700_usb_id_table[33], + &dib0700_usb_id_table[52], + &dib0700_usb_id_table[60], NULL}, + { NULL }, + }, + { "TechniSat AirStar TeleStick 2", + { &dib0700_usb_id_table[74], NULL }, + { NULL }, + }, + { "Medion CTX1921 DVB-T USB", + { &dib0700_usb_id_table[75], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, + .frontend_attach = stk807x_frontend_attach, + .tuner_attach = dib807x_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 3, + .devices = { + { "DiBcom STK807xP reference design", + { &dib0700_usb_id_table[62], NULL }, + { NULL }, + }, + { "Prolink Pixelview SBTVD", + { &dib0700_usb_id_table[63], NULL }, + { NULL }, + }, + { "EvolutePC TVWay+", + { &dib0700_usb_id_table[64], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_NEC_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, + .frontend_attach = stk807xpvr_frontend_attach0, + .tuner_attach = dib807x_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, + .frontend_attach = stk807xpvr_frontend_attach1, + .tuner_attach = dib807x_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom STK807xPVR reference design", + { &dib0700_usb_id_table[61], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, + .frontend_attach = stk809x_frontend_attach, + .tuner_attach = dib809x_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom STK8096GP reference design", + { &dib0700_usb_id_table[67], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = dib90x0_pid_filter, + .pid_filter_ctrl = dib90x0_pid_filter_ctrl, + .frontend_attach = stk9090m_frontend_attach, + .tuner_attach = dib9090_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom STK9090M reference design", + { &dib0700_usb_id_table[69], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, + .frontend_attach = nim8096md_frontend_attach, + .tuner_attach = nim8096md_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom NIM8096MD reference design", + { &dib0700_usb_id_table[70], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = dib90x0_pid_filter, + .pid_filter_ctrl = dib90x0_pid_filter_ctrl, + .frontend_attach = nim9090md_frontend_attach, + .tuner_attach = nim9090md_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom NIM9090MD reference design", + { &dib0700_usb_id_table[71], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = nim7090_frontend_attach, + .tuner_attach = nim7090_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom NIM7090 reference design", + { &dib0700_usb_id_table[72], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = tfe7090pvr_frontend0_attach, + .tuner_attach = tfe7090pvr_tuner0_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = tfe7090pvr_frontend1_attach, + .tuner_attach = tfe7090pvr_tuner1_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom TFE7090PVR reference design", + { &dib0700_usb_id_table[73], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = pctv340e_frontend_attach, + .tuner_attach = xc4000_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct + dib0700_adapter_state), + }, + }, + + .num_device_descs = 2, + .devices = { + { "Pinnacle PCTV 340e HD Pro USB Stick", + { &dib0700_usb_id_table[76], NULL }, + { NULL }, + }, + { "Pinnacle PCTV Hybrid Stick Solo", + { &dib0700_usb_id_table[77], NULL }, + { NULL }, + }, + }, + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = tfe7790p_frontend_attach, + .tuner_attach = tfe7790p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + } }, + + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom TFE7790P reference design", + { &dib0700_usb_id_table[78], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, + .frontend_attach = tfe8096p_frontend_attach, + .tuner_attach = tfe8096p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + + } }, + + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom TFE8096P reference design", + { &dib0700_usb_id_table[79], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_BIT_RC5 | + RC_BIT_RC6_MCE | + RC_BIT_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, +}; + +int dib0700_device_count = ARRAY_SIZE(dib0700_devices); -- cgit v1.2.3