# ================================ RAM ================================
# RAM bits <= 18K; Data width <= 36; Address width <= 9: -> PDPW16KD

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 9 -set DATA_WIDTH 36 sync_ram_sdp
hierarchy -top sync_ram_sdp
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:PDPW16KD

## With parameters

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp
hierarchy -top sync_ram_sdp
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 0 t:PDPW16KD # too inefficient
select -assert-count 9 t:TRELLIS_DPR16X4

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set syn_ramstyle "block_ram" m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:PDPW16KD

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set syn_ramstyle "Block_RAM" m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:PDPW16KD # any case works

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set ram_block 1 m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:PDPW16KD

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set syn_ramstyle "registers" m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 0 t:PDPW16KD # requested FFRAM explicitly
select -assert-count 180 t:TRELLIS_FF

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set logic_block 1 m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 0 t:PDPW16KD # requested FFRAM explicitly
select -assert-count 180 t:TRELLIS_FF

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set syn_romstyle "ebr" m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:$mem_v2 # requested BROM but this is a RAM

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set rom_block 1 m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:$mem_v2 # requested BROM but this is a RAM

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set syn_ramstyle "block_ram" m:memory
synth_ecp5 -top sync_ram_sdp -nobram; cd sync_ram_sdp
select -assert-count 1 t:$mem_v2 # requested BRAM but BRAM is disabled

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set ram_block 1 m:memory
synth_ecp5 -top sync_ram_sdp -nobram; cd sync_ram_sdp
select -assert-count 1 t:$mem_v2 # requested BRAM but BRAM is disabled

# RAM bits <= 18K; Data width <= 18; Address width <= 10: -> DP16KD

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 10 -set DATA_WIDTH 18 sync_ram_sdp
hierarchy -top sync_ram_sdp
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:DP16KD

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 11 -set DATA_WIDTH 9 sync_ram_sdp
hierarchy -top sync_ram_sdp
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:DP16KD

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 12 -set DATA_WIDTH 4 sync_ram_sdp
hierarchy -top sync_ram_sdp
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:DP16KD

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 13 -set DATA_WIDTH 2 sync_ram_sdp
hierarchy -top sync_ram_sdp
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:DP16KD

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 14 -set DATA_WIDTH 1 sync_ram_sdp
hierarchy -top sync_ram_sdp
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:DP16KD

## With parameters

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp
hierarchy -top sync_ram_sdp
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 0 t:DP16KD # too inefficient
select -assert-count 5 t:TRELLIS_DPR16X4

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set syn_ramstyle "block_ram" m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:DP16KD

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set syn_ramstyle "Block_RAM" m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:DP16KD # any case works

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set ram_block 1 m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:DP16KD

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set syn_ramstyle "registers" m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 0 t:DP16KD # requested FFRAM explicitly
select -assert-count 90 t:TRELLIS_FF

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set logic_block 1 m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 0 t:DP16KD # requested FFRAM explicitly
select -assert-count 90 t:TRELLIS_FF

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set syn_romstyle "ebr" m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:$mem_v2 # requested BROM but this is a RAM

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set rom_block 1 m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:$mem_v2 # requested BROM but this is a RAM

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set syn_ramstyle "block_ram" m:memory
synth_ecp5 -top sync_ram_sdp -nobram; cd sync_ram_sdp
select -assert-count 1 t:$mem_v2 # requested BRAM but BRAM is disabled

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set ram_block 1 m:memory
synth_ecp5 -top sync_ram_sdp -nobram; cd sync_ram_sdp
select -assert-count 1 t:$mem_v2 # requested BRAM but BRAM is disabled

# RAM bits <= 64; Data width <= 4; Address width <= 4: -> DPR16X4

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 4 -set DATA_WIDTH 4 sync_ram_sdp
hierarchy -top sync_ram_sdp
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:TRELLIS_DPR16X4

## With parameters

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 4 -set DATA_WIDTH 4 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set syn_ramstyle "distributed" m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 1 t:TRELLIS_DPR16X4

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 4 -set DATA_WIDTH 4 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set syn_ramstyle "registers" m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 0 t:TRELLIS_DPR16X4 # requested FFRAM explicitly
select -assert-count 68 t:TRELLIS_FF

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 4 -set DATA_WIDTH 4 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set logic_block 1 m:memory
synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp
select -assert-count 0 t:TRELLIS_DPR16X4 # requested FFRAM explicitly
select -assert-count 68 t:TRELLIS_FF

design -reset; read_verilog -defer ../common/blockram.v
chparam -set ADDRESS_WIDTH 4 -set DATA_WIDTH 4 sync_ram_sdp
hierarchy -top sync_ram_sdp
setattr -set syn_ramstyle "distributed" m:memory
synth_ecp5 -top sync_ram_sdp -nolutram; cd sync_ram_sdp
select -assert-count 1 t:$mem_v2 # requested LUTRAM but LUTRAM is disabled

# ================================ ROM ================================
# ROM bits <= 18K; Data width <= 36; Address width <= 9: -> PDPW16KD

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 9 -set DATA_WIDTH 36 sync_rom
hierarchy -top sync_rom
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 1 t:PDPW16KD

## With parameters

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 3 -set DATA_WIDTH 36 sync_rom
hierarchy -top sync_rom
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 0 t:PDPW16KD # too inefficient
select -assert-min 18 t:LUT4

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_rom
hierarchy -top sync_rom
setattr -set syn_romstyle "ebr" m:memory
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 1 t:PDPW16KD

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_rom
hierarchy -top sync_rom
setattr -set rom_block 1 m:memory
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 1 t:PDPW16KD

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 3 -set DATA_WIDTH 36 sync_rom
hierarchy -top sync_rom
setattr -set syn_romstyle "logic" m:memory
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 0 t:PDPW16KD # requested LUTROM explicitly
select -assert-min 18 t:LUT4

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 3 -set DATA_WIDTH 36 sync_rom
hierarchy -top sync_rom
setattr -set logic_block 1 m:memory
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 0 t:PDPW16KD # requested LUTROM explicitly
select -assert-min 18 t:LUT4

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_rom
hierarchy -top sync_rom
setattr -set syn_ramstyle "block_ram" m:memory
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 1 t:$mem_v2 # requested BRAM but this is a ROM

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_rom
hierarchy -top sync_rom
setattr -set ram_block 1 m:memory
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 1 t:$mem_v2 # requested BRAM but this is a ROM

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_rom
hierarchy -top sync_rom
setattr -set syn_ramstyle "block_rom" m:memory
synth_ecp5 -top sync_rom -nobram; cd sync_rom
select -assert-count 1 t:$mem_v2 # requested BROM but BRAM is disabled

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_rom
hierarchy -top sync_rom
setattr -set rom_block 1 m:memory
synth_ecp5 -top sync_rom -nobram; cd sync_rom
select -assert-count 1 t:$mem_v2 # requested BROM but BRAM is disabled

# ROM bits <= 18K; Data width <= 18; Address width <= 10: -> DP16KD

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 10 -set DATA_WIDTH 18 sync_rom
hierarchy -top sync_rom
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 1 t:DP16KD

## With parameters

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 3 -set DATA_WIDTH 18 sync_rom
hierarchy -top sync_rom
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 0 t:DP16KD # too inefficient
select -assert-min 9 t:LUT4

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_rom
hierarchy -top sync_rom
setattr -set syn_romstyle "ebr" m:memory
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 1 t:DP16KD

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_rom
hierarchy -top sync_rom
setattr -set rom_block 1 m:memory
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 1 t:DP16KD

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 3 -set DATA_WIDTH 18 sync_rom
hierarchy -top sync_rom
setattr -set syn_romstyle "logic" m:memory
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 0 t:DP16KD # requested LUTROM explicitly
select -assert-min 9 t:LUT4

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 3 -set DATA_WIDTH 18 sync_rom
hierarchy -top sync_rom
setattr -set logic_block 1 m:memory
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 0 t:DP16KD # requested LUTROM explicitly
select -assert-min 9 t:LUT4

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_rom
hierarchy -top sync_rom
setattr -set syn_ramstyle "block_ram" m:memory
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 1 t:$mem_v2 # requested BRAM but this is a ROM

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_rom
hierarchy -top sync_rom
setattr -set ram_block 1 m:memory
synth_ecp5 -top sync_rom; cd sync_rom
select -assert-count 1 t:$mem_v2 # requested BRAM but this is a ROM

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_rom
hierarchy -top sync_rom
setattr -set syn_ramstyle "block_rom" m:memory
synth_ecp5 -top sync_rom -nobram; cd sync_rom
select -assert-count 1 t:$mem_v2 # requested BROM but BRAM is disabled

design -reset; read_verilog -defer ../common/blockrom.v
chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_rom
hierarchy -top sync_rom
setattr -set rom_block 1 m:memory
synth_ecp5 -top sync_rom -nobram; cd sync_rom
select -assert-count 1 t:$mem_v2 # requested BROM but BRAM is disabled