.. _chapter:verilog: The Verilog and AST frontends ============================= This chapter provides an overview of the implementation of the Yosys Verilog and AST frontends. The Verilog frontend reads Verilog-2005 code and creates an abstract syntax tree (AST) representation of the input. This AST representation is then passed to the AST frontend that converts it to RTLIL data, as illustrated in :numref:`Fig. %s `. .. figure:: ../images/verilog_flow.* :class: width-helper :name: fig:Verilog_flow Simplified Verilog to RTLIL data flow Transforming Verilog to AST --------------------------- The Verilog frontend converts the Verilog sources to an internal AST representation that closely resembles the structure of the original Verilog code. The Verilog frontend consists of three components, the Preprocessor, the Lexer and the Parser. The source code to the Verilog frontend can be found in frontends/verilog/ in the Yosys source tree. The Verilog preprocessor ~~~~~~~~~~~~~~~~~~~~~~~~ The Verilog preprocessor scans over the Verilog source code and interprets some of the Verilog compiler directives such as :literal:`\`include`, :literal:`\`define` and :literal:`\`ifdef`. It is implemented as a C++ function that is passed a file descriptor as input and returns the pre-processed Verilog code as a ``std::string``. The source code to the Verilog Preprocessor can be found in frontends/verilog/preproc.cc in the Yosys source tree. The Verilog lexer ~~~~~~~~~~~~~~~~~ The Verilog Lexer is written using the lexer generator flex . Its source code can be found in frontends/verilog/verilog_lexer.l in the Yosys source tree. The lexer does little more than identifying all keywords and literals recognised by the Yosys Verilog frontend. The lexer keeps track of the current location in the Verilog source code using some global variables. These variables are used by the constructor of AST nodes to annotate each node with the source code location it originated from. Finally the lexer identifies and handles special comments such as "``// synopsys translate_off``" and "``// synopsys full_case``". (It is recommended to use :literal:`\`ifdef` constructs instead of the Synsopsys translate_on/off comments and attributes such as ``(* full_case *)`` over "``// synopsys full_case``" whenever possible.) The Verilog parser ~~~~~~~~~~~~~~~~~~ The Verilog Parser is written using the parser generator bison . Its source code can be found in frontends/verilog/verilog_parser.y in the Yosys source tree. It generates an AST using the ``AST::AstNode`` data structure defined in frontends/ast/ast.h. An ``AST::AstNode`` object has the following properties: .. list-table:: AST node types with their corresponding Verilog constructs. :name: tab:Verilog_AstNodeType :widths: 50 50 * - AST Node Type - Corresponding Verilog Construct * - AST_NONE - This Node type should never be used. * - AST_DESIGN - This node type is used for the top node of the AST tree. It has no corresponding Verilog construct. * - AST_MODULE, AST_TASK, AST_FUNCTION - ``module``, ``task`` and ``function`` * - AST_WIRE - ``input``, ``output``, ``wire``, ``reg`` and ``integer`` * - AST_MEMORY - Verilog Arrays * - AST_AUTOWIRE - Created by the simplifier when an undeclared signal name is used. * - AST_PARAMETER, AST_LOCALPARAM - ``parameter`` and ``localparam`` * - AST_PARASET - Parameter set in cell instantiation * - AST_ARGUMENT - Port connection in cell instantiation * - AST_RANGE - Bit-Index in a signal or element index in array * - AST_CONSTANT - A literal value * - AST_CELLTYPE - The type of cell in cell instantiation * - AST_IDENTIFIER - An Identifier (signal name in expression or cell/task/etc. name in other contexts) * - AST_PREFIX - Construct an identifier in the form []. (used only in advanced generate constructs) * - AST_FCALL, AST_TCALL - Call to function or task * - AST_TO_SIGNED, AST_TO_UNSIGNED - The ``$signed()`` and ``$unsigned()`` functions * - AST_CONCAT, AST_REPLICATE - The ``{...}`` and ``{...{...}}`` operators * - AST_BIT_NOT, AST_BIT_AND, AST_BIT_OR, AST_BIT_XOR, AST_BIT_XNOR - The bitwise operators ``~``, ``&``, ``|``, ``^`` and ``~^`` * - AST_REDUCE_AND, AST_REDUCE_OR, AST_REDUCE_XOR, AST_REDUCE_XNOR - The unary reduction operators ``~``, ``&``, ``|``, ``^`` and ``~^`` * - AST_REDUCE_BOOL - Conversion from multi-bit value to boolean value (equivalent to AST_REDUCE_OR) * - AST_SHIFT_LEFT, AST_SHIFT_RIGHT, AST_SHIFT_SLEFT, AST_SHIFT_SRIGHT - The shift operators ``<<``, ``>>``, ``<<<`` and ``>>>`` * - AST_LT, AST_LE, AST_EQ, AST_NE, AST_GE, AST_GT - The relational operators ``<``, ``<=``, ``==``, ``!=``, ``>=`` and ``>`` * - AST_ADD, AST_SUB, AST_MUL, AST_DIV, AST_MOD, AST_POW - The binary operators ``+``, ``-``, ``*``, ``/``, ``%`` and ``**`` * - AST_POS, AST_NEG - The prefix operators ``+`` and ``-`` * - AST_LOGIC_AND, AST_LOGIC_OR, AST_LOGIC_NOT - The logic operators ``&&``, ``||`` and ``!`` * - AST_TERNARY - The ternary ``?:``-operator * - AST_MEMRD AST_MEMWR - Read and write memories. These nodes are generated by the AST simplifier for writes/reads to/from Verilog arrays. * - AST_ASSIGN - An ``assign`` statement * - AST_CELL - A cell instantiation * - AST_PRIMITIVE - A primitive cell (``and``, ``nand``, ``or``, etc.) * - AST_ALWAYS, AST_INITIAL - Verilog ``always``- and ``initial``-blocks * - AST_BLOCK - A ``begin``-``end``-block * - AST_ASSIGN_EQ. AST_ASSIGN_LE - Blocking (``=``) and nonblocking (``<=``) assignments within an ``always``- or ``initial``-block * - AST_CASE. AST_COND, AST_DEFAULT - The ``case`` (``if``) statements, conditions within a case and the default case respectively * - AST_FOR - A ``for``-loop with an ``always``- or ``initial``-block * - AST_GENVAR, AST_GENBLOCK, AST_GENFOR, AST_GENIF - The ``genvar`` and ``generate`` keywords and ``for`` and ``if`` within a generate block. * - AST_POSEDGE, AST_NEGEDGE, AST_EDGE - Event conditions for ``always`` blocks. - | The node type | This enum (``AST::AstNodeType``) specifies the role of the node. :numref:`Table %s ` contains a list of all node types. - | The child nodes | This is a list of pointers to all children in the abstract syntax tree. - | Attributes | As almost every AST node might have Verilog attributes assigned to it, the ``AST::AstNode`` has direct support for attributes. Note that the attribute values are again AST nodes. - | Node content | Each node might have additional content data. A series of member variables exist to hold such data. For example the member ``std::string str`` can hold a string value and is used e.g. in the AST_IDENTIFIER node type to store the identifier name. - | Source code location | Each ``AST::AstNode`` is automatically annotated with the current source code location by the ``AST::AstNode`` constructor. It is stored in the ``std::string filename`` and ``int linenum`` member variables. The ``AST::AstNode`` constructor can be called with up to two child nodes that are automatically added to the list of child nodes for the new object. This simplifies the creation of AST nodes for simple expressions a bit. For example the bison code for parsing multiplications: .. code:: none :number-lines: basic_expr '*' attr basic_expr { $$ = new AstNode(AST_MUL, $1, $4); append_attr($$, $3); } | The generated AST data structure is then passed directly to the AST frontend that performs the actual conversion to RTLIL. Note that the Yosys command ``read_verilog`` provides the options ``-yydebug`` and ``-dump_ast`` that can be used to print the parse tree or abstract syntax tree respectively. Transforming AST to RTLIL ------------------------- The AST Frontend converts a set of modules in AST representation to modules in RTLIL representation and adds them to the current design. This is done in two steps: simplification and RTLIL generation. The source code to the AST frontend can be found in ``frontends/ast/`` in the Yosys source tree. AST simplification ~~~~~~~~~~~~~~~~~~ A full-featured AST is too complex to be transformed into RTLIL directly. Therefore it must first be brought into a simpler form. This is done by calling the ``AST::AstNode::simplify()`` method of all AST_MODULE nodes in the AST. This initiates a recursive process that performs the following transformations on the AST data structure: - Inline all task and function calls. - Evaluate all ``generate``-statements and unroll all ``for``-loops. - Perform const folding where it is necessary (e.g. in the value part of AST_PARAMETER, AST_LOCALPARAM, AST_PARASET and AST_RANGE nodes). - Replace AST_PRIMITIVE nodes with appropriate AST_ASSIGN nodes. - Replace dynamic bit ranges in the left-hand-side of assignments with AST_CASE nodes with AST_COND children for each possible case. - Detect array access patterns that are too complicated for the RTLIL::Memory abstraction and replace them with a set of signals and cases for all reads and/or writes. - Otherwise replace array accesses with AST_MEMRD and AST_MEMWR nodes. In addition to these transformations, the simplifier also annotates the AST with additional information that is needed for the RTLIL generator, namely: - All ranges (width of signals and bit selections) are not only const folded but (when a constant value is found) are also written to member variables in the AST_RANGE node. - All identifiers are resolved and all AST_IDENTIFIER nodes are annotated with a pointer to the AST node that contains the declaration of the identifier. If no declaration has been found, an AST_AUTOWIRE node is created and used for the annotation. This produces an AST that is fairly easy to convert to the RTLIL format. Generating RTLIL ~~~~~~~~~~~~~~~~ After AST simplification, the ``AST::AstNode::genRTLIL()`` method of each AST_MODULE node in the AST is called. This initiates a recursive process that generates equivalent RTLIL data for the AST data. The ``AST::AstNode::genRTLIL()`` method returns an ``RTLIL::SigSpec`` structure. For nodes that represent expressions (operators, constants, signals, etc.), the cells needed to implement the calculation described by the expression are created and the resulting signal is returned. That way it is easy to generate the circuits for large expressions using depth-first recursion. For nodes that do not represent an expression (such as AST_CELL), the corresponding circuit is generated and an empty ``RTLIL::SigSpec`` is returned. Synthesizing Verilog always blocks -------------------------------------- For behavioural Verilog code (code utilizing ``always``- and ``initial``-blocks) it is necessary to also generate ``RTLIL::Process`` objects. This is done in the following way: Whenever ``AST::AstNode::genRTLIL()`` encounters an ``always``- or ``initial``-block, it creates an instance of ``AST_INTERNAL::ProcessGenerator``. This object then generates the ``RTLIL::Process`` object for the block. It also calls ``AST::AstNode::genRTLIL()`` for all right-hand-side expressions contained within the block. First the ``AST_INTERNAL::ProcessGenerator`` creates a list of all signals assigned within the block. It then creates a set of temporary signals using the naming scheme $\ \\\ for each of the assigned signals. Then an ``RTLIL::Process`` is created that assigns all intermediate values for each left-hand-side signal to the temporary signal in its ``RTLIL::CaseRule``/``RTLIL::SwitchRule`` tree. Finally a ``RTLIL::SyncRule`` is created for the ``RTLIL::Process`` that assigns the temporary signals for the final values to the actual signals. A process may also contain memory writes. A ``RTLIL::MemWriteAction`` is created for each of them. Calls to ``AST::AstNode::genRTLIL()`` are generated for right hand sides as needed. When blocking assignments are used, ``AST::AstNode::genRTLIL()`` is configured using global variables to use the temporary signals that hold the correct intermediate values whenever one of the previously assigned signals is used in an expression. Unfortunately the generation of a correct ``RTLIL::CaseRule``/``RTLIL::SwitchRule`` tree for behavioural code is a non-trivial task. The AST frontend solves the problem using the approach described on the following pages. The following example illustrates what the algorithm is supposed to do. Consider the following Verilog code: .. code:: verilog :number-lines: always @(posedge clock) begin out1 = in1; if (in2) out1 = !out1; out2 <= out1; if (in3) out2 <= out2; if (in4) if (in5) out3 <= in6; else out3 <= in7; out1 = out1 ^ out2; end This is translated by the Verilog and AST frontends into the following RTLIL code (attributes, cell parameters and wire declarations not included): .. code:: RTLIL :number-lines: cell $logic_not $logic_not$:4$2 connect \A \in1 connect \Y $logic_not$:4$2_Y end cell $xor $xor$:13$3 connect \A $1\out1[0:0] connect \B \out2 connect \Y $xor$:13$3_Y end process $proc$:1$1 assign $0\out3[0:0] \out3 assign $0\out2[0:0] $1\out1[0:0] assign $0\out1[0:0] $xor$:13$3_Y switch \in2 case 1'1 assign $1\out1[0:0] $logic_not$:4$2_Y case assign $1\out1[0:0] \in1 end switch \in3 case 1'1 assign $0\out2[0:0] \out2 case end switch \in4 case 1'1 switch \in5 case 1'1 assign $0\out3[0:0] \in6 case assign $0\out3[0:0] \in7 end case end sync posedge \clock update \out1 $0\out1[0:0] update \out2 $0\out2[0:0] update \out3 $0\out3[0:0] end Note that the two operators are translated into separate cells outside the generated process. The signal ``out1`` is assigned using blocking assignments and therefore ``out1`` has been replaced with a different signal in all expressions after the initial assignment. The signal ``out2`` is assigned using nonblocking assignments and therefore is not substituted on the right-hand-side expressions. The ``RTLIL::CaseRule``/``RTLIL::SwitchRule`` tree must be interpreted the following way: - On each case level (the body of the process is the root case), first the actions on this level are evaluated and then the switches within the case are evaluated. (Note that the last assignment on line 13 of the Verilog code has been moved to the beginning of the RTLIL process to line 13 of the RTLIL listing.) I.e. the special cases deeper in the switch hierarchy override the defaults on the upper levels. The assignments in lines 12 and 22 of the RTLIL code serve as an example for this. Note that in contrast to this, the order within the ``RTLIL::SwitchRule`` objects within a ``RTLIL::CaseRule`` is preserved with respect to the original AST and Verilog code. - The whole ``RTLIL::CaseRule``/``RTLIL::SwitchRule`` tree describes an asynchronous circuit. I.e. the decision tree formed by the switches can be seen independently for each assigned signal. Whenever one assigned signal changes, all signals that depend on the changed signals are to be updated. For example the assignments in lines 16 and 18 in the RTLIL code in fact influence the assignment in line 12, even though they are in the "wrong order". The only synchronous part of the process is in the ``RTLIL::SyncRule`` object generated at line 35 in the RTLIL code. The sync rule is the only part of the process where the original signals are assigned. The synchronization event from the original Verilog code has been translated into the synchronization type (posedge) and signal (\\clock) for the ``RTLIL::SyncRule`` object. In the case of this simple example the ``RTLIL::SyncRule`` object is later simply transformed into a set of d-type flip-flops and the ``RTLIL::CaseRule``/``RTLIL::SwitchRule`` tree to a decision tree using multiplexers. In more complex examples (e.g. asynchronous resets) the part of the ``RTLIL::CaseRule``/``RTLIL::SwitchRule`` tree that describes the asynchronous reset must first be transformed to the correct ``RTLIL::SyncRule`` objects. This is done by the proc_adff pass. The ProcessGenerator algorithm ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The ``AST_INTERNAL::ProcessGenerator`` uses the following internal state variables: - | ``subst_rvalue_from`` and ``subst_rvalue_to`` | These two variables hold the replacement pattern that should be used by ``AST::AstNode::genRTLIL()`` for signals with blocking assignments. After initialization of ``AST_INTERNAL::ProcessGenerator`` these two variables are empty. - | ``subst_lvalue_from`` and ``subst_lvalue_to`` | These two variables contain the mapping from left-hand-side signals (\\\ ) to the current temporary signal for the same thing (initially $0\\\ ). - | ``current_case`` | A pointer to a ``RTLIL::CaseRule`` object. Initially this is the root case of the generated ``RTLIL::Process``. As the algorithm runs these variables are continuously modified as well as pushed to the stack and later restored to their earlier values by popping from the stack. On startup the ProcessGenerator generates a new ``RTLIL::Process`` object with an empty root case and initializes its state variables as described above. Then the ``RTLIL::SyncRule`` objects are created using the synchronization events from the AST_ALWAYS node and the initial values of ``subst_lvalue_from`` and ``subst_lvalue_to``. Then the AST for this process is evaluated recursively. During this recursive evaluation, three different relevant types of AST nodes can be discovered: AST_ASSIGN_LE (nonblocking assignments), AST_ASSIGN_EQ (blocking assignments) and AST_CASE (``if`` or ``case`` statement). Handling of nonblocking assignments ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ When an AST_ASSIGN_LE node is discovered, the following actions are performed by the ProcessGenerator: - The left-hand-side is evaluated using ``AST::AstNode::genRTLIL()`` and mapped to a temporary signal name using ``subst_lvalue_from`` and ``subst_lvalue_to``. - The right-hand-side is evaluated using ``AST::AstNode::genRTLIL()``. For this call, the values of ``subst_rvalue_from`` and ``subst_rvalue_to`` are used to map blocking-assigned signals correctly. - Remove all assignments to the same left-hand-side as this assignment from the ``current_case`` and all cases within it. - Add the new assignment to the ``current_case``. Handling of blocking assignments ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ When an AST_ASSIGN_EQ node is discovered, the following actions are performed by the ProcessGenerator: - Perform all the steps that would be performed for a nonblocking assignment (see above). - Remove the found left-hand-side (before lvalue mapping) from ``subst_rvalue_from`` and also remove the respective bits from ``subst_rvalue_to``. - Append the found left-hand-side (before lvalue mapping) to ``subst_rvalue_from`` and append the found right-hand-side to ``subst_rvalue_to``. Handling of cases and if-statements ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ When an AST_CASE node is discovered, the following actions are performed by the ProcessGenerator: - The values of ``subst_rvalue_from``, ``subst_rvalue_to``, ``subst_lvalue_from`` and ``subst_lvalue_to`` are pushed to the stack. - A new ``RTLIL::SwitchRule`` object is generated, the selection expression is evaluated using ``AST::AstNode::genRTLIL()`` (with the use of ``subst_rvalue_from`` and ``subst_rvalue_to``) and added to the ``RTLIL::SwitchRule`` object and the object is added to the ``current_case``. - All lvalues assigned to within the AST_CASE node using blocking assignments are collected and saved in the local variable ``this_case_eq_lvalue``. - New temporary signals are generated for all signals in ``this_case_eq_lvalue`` and stored in ``this_case_eq_ltemp``. - The signals in ``this_case_eq_lvalue`` are mapped using ``subst_rvalue_from`` and ``subst_rvalue_to`` and the resulting set of signals is stored in ``this_case_eq_rvalue``. Then the following steps are performed for each AST_COND node within the AST_CASE node: - Set ``subst_rvalue_from``, ``subst_rvalue_to``, ``subst_lvalue_from`` and ``subst_lvalue_to`` to the values that have been pushed to the stack. - Remove ``this_case_eq_lvalue`` from ``subst_lvalue_from``/``subst_lvalue_to``. - Append ``this_case_eq_lvalue`` to ``subst_lvalue_from`` and append ``this_case_eq_ltemp`` to ``subst_lvalue_to``. - Push the value of ``current_case``. - Create a new ``RTLIL::CaseRule``. Set ``current_case`` to the new object and add the new object to the ``RTLIL::SwitchRule`` created above. - Add an assignment from ``this_case_eq_rvalue`` to ``this_case_eq_ltemp`` to the new ``current_case``. - Evaluate the compare value for this case using ``AST::AstNode::genRTLIL()`` (with the use of ``subst_rvalue_from`` and ``subst_rvalue_to``) modify the new ``current_case`` accordingly. - Recursion into the children of the AST_COND node. - Restore ``current_case`` by popping the old value from the stack. Finally the following steps are performed: - The values of ``subst_rvalue_from``, ``subst_rvalue_to``, ``subst_lvalue_from`` and ``subst_lvalue_to`` are popped from the stack. - The signals from ``this_case_eq_lvalue`` are removed from the ``subst_rvalue_from``/``subst_rvalue_to``-pair. - The value of ``this_case_eq_lvalue`` is appended to ``subst_rvalue_from`` and the value of ``this_case_eq_ltemp`` is appended to ``subst_rvalue_to``. - Map the signals in ``this_case_eq_lvalue`` using ``subst_lvalue_from``/``subst_lvalue_to``. - Remove all assignments to signals in ``this_case_eq_lvalue`` in ``current_case`` and all cases within it. - Add an assignment from ``this_case_eq_ltemp`` to ``this_case_eq_lvalue`` to ``current_case``. Further analysis of the algorithm for cases and if-statements ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ With respect to nonblocking assignments the algorithm is easy: later assignments invalidate earlier assignments. For each signal assigned using nonblocking assignments exactly one temporary variable is generated (with the $0-prefix) and this variable is used for all assignments of the variable. Note how all the ``_eq_``-variables become empty when no blocking assignments are used and many of the steps in the algorithm can then be ignored as a result of this. For a variable with blocking assignments the algorithm shows the following behaviour: First a new temporary variable is created. This new temporary variable is then registered as the assignment target for all assignments for this variable within the cases for this AST_CASE node. Then for each case the new temporary variable is first assigned the old temporary variable. This assignment is overwritten if the variable is actually assigned in this case and is kept as a default value otherwise. This yields an ``RTLIL::CaseRule`` that assigns the new temporary variable in all branches. So when all cases have been processed a final assignment is added to the containing block that assigns the new temporary variable to the old one. Note how this step always overrides a previous assignment to the old temporary variable. Other than nonblocking assignments, the old assignment could still have an effect somewhere in the design, as there have been calls to ``AST::AstNode::genRTLIL()`` with a ``subst_rvalue_from``/``subst_rvalue_to``-tuple that contained the right-hand-side of the old assignment. The proc pass ~~~~~~~~~~~~~ The ProcessGenerator converts a behavioural model in AST representation to a behavioural model in ``RTLIL::Process`` representation. The actual conversion from a behavioural model to an RTL representation is performed by the proc pass and the passes it launches: - | proc_clean and proc_rmdead | These two passes just clean up the ``RTLIL::Process`` structure. The proc_clean pass removes empty parts (eg. empty assignments) from the process and proc_rmdead detects and removes unreachable branches from the process's decision trees. - | proc_arst | This pass detects processes that describe d-type flip-flops with asynchronous resets and rewrites the process to better reflect what they are modelling: Before this pass, an asynchronous reset has two edge-sensitive sync rules and one top-level for the reset path. After this pass the sync rule for the reset is level-sensitive and the top-level has been removed. - | proc_mux | This pass converts the /-tree to a tree of multiplexers per written signal. After this, the structure only contains the s that describe the output registers. - | proc_dff | This pass replaces the s to d-type flip-flops (with asynchronous resets if necessary). - | proc_dff | This pass replaces the s with $memwr cells. - | proc_clean | A final call to proc_clean removes the now empty objects. Performing these last processing steps in passes instead of in the Verilog frontend has two important benefits: First it improves the transparency of the process. Everything that happens in a separate pass is easier to debug, as the RTLIL data structures can be easily investigated before and after each of the steps. Second it improves flexibility. This scheme can easily be extended to support other types of storage-elements, such as sr-latches or d-latches, without having to extend the actual Verilog frontend. Synthesizing Verilog arrays --------------------------- Add some information on the generation of $memrd and $memwr cells and how they are processed in the memory pass. Synthesizing parametric designs ------------------------------- Add some information on the ``RTLIL::Module::derive()`` method and how it is used to synthesize parametric modules via the hierarchy pass.