diff options
Diffstat (limited to 'techlibs/intel_alm/common')
-rw-r--r-- | techlibs/intel_alm/common/bram_m10k.txt | 4 | ||||
-rw-r--r-- | techlibs/intel_alm/common/bram_m10k_map.v | 31 | ||||
-rw-r--r-- | techlibs/intel_alm/common/megafunction_bb.v | 37 | ||||
-rw-r--r-- | techlibs/intel_alm/common/mem_sim.v | 34 | ||||
-rw-r--r-- | techlibs/intel_alm/common/quartus_rename.v | 45 |
5 files changed, 117 insertions, 34 deletions
diff --git a/techlibs/intel_alm/common/bram_m10k.txt b/techlibs/intel_alm/common/bram_m10k.txt index 837e3a330..e9355fe2c 100644 --- a/techlibs/intel_alm/common/bram_m10k.txt +++ b/techlibs/intel_alm/common/bram_m10k.txt @@ -1,4 +1,4 @@ -bram __MISTRAL_M10K_SDP +bram MISTRAL_M10K init 0 # TODO: Re-enable when I figure out how BRAM init works abits 13 @D8192x1 dbits 1 @D8192x1 @@ -27,7 +27,7 @@ bram __MISTRAL_M10K_SDP endbram -match __MISTRAL_M10K_SDP +match MISTRAL_M10K min efficiency 5 make_transp endmatch diff --git a/techlibs/intel_alm/common/bram_m10k_map.v b/techlibs/intel_alm/common/bram_m10k_map.v deleted file mode 100644 index 061463c3e..000000000 --- a/techlibs/intel_alm/common/bram_m10k_map.v +++ /dev/null @@ -1,31 +0,0 @@ -module __MISTRAL_M10K_SDP(CLK1, A1ADDR, A1DATA, A1EN, B1ADDR, B1DATA, B1EN);
-
-parameter CFG_ABITS = 10;
-parameter CFG_DBITS = 10;
-parameter CFG_ENABLE_A = 1;
-parameter CFG_ENABLE_B = 1;
-
-input CLK1;
-input [CFG_ABITS-1:0] A1ADDR, B1ADDR;
-input [CFG_DBITS-1:0] A1DATA;
-output [CFG_DBITS-1:0] B1DATA;
-input [CFG_ENABLE_A-1:0] A1EN, B1EN;
-
-altsyncram #(
- .operation_mode("dual_port"),
- .ram_block_type("m10k"),
- .widthad_a(CFG_ABITS),
- .width_a(CFG_DBITS),
- .widthad_b(CFG_ABITS),
- .width_b(CFG_DBITS),
-) _TECHMAP_REPLACE_ (
- .address_a(A1ADDR),
- .data_a(A1DATA),
- .wren_a(A1EN),
- .address_b(B1ADDR),
- .q_b(B1DATA),
- .clock0(CLK1),
- .clock1(CLK1)
-);
-
-endmodule
diff --git a/techlibs/intel_alm/common/megafunction_bb.v b/techlibs/intel_alm/common/megafunction_bb.v index b5a3d8892..820b0430e 100644 --- a/techlibs/intel_alm/common/megafunction_bb.v +++ b/techlibs/intel_alm/common/megafunction_bb.v @@ -156,4 +156,39 @@ input [ax_width-1:0] ax; input [ay_scan_in_width-1:0] ay; output [result_a_width-1:0] resulta; -endmodule
\ No newline at end of file +endmodule + +(* blackbox *) +module cyclonev_ram_block(portaaddr, portadatain, portawe, portbaddr, portbdataout, portbre, clk0); + +parameter operation_mode = "dual_port"; +parameter logical_ram_name = ""; +parameter port_a_address_width = 10; +parameter port_a_data_width = 10; +parameter port_a_logical_ram_depth = 1024; +parameter port_a_logical_ram_width = 10; +parameter port_a_first_address = 0; +parameter port_a_last_address = 1023; +parameter port_a_first_bit_number = 0; +parameter port_b_address_width = 10; +parameter port_b_data_width = 10; +parameter port_b_logical_ram_depth = 1024; +parameter port_b_logical_ram_width = 10; +parameter port_b_first_address = 0; +parameter port_b_last_address = 1023; +parameter port_b_first_bit_number = 0; +parameter port_b_address_clock = "clock0"; +parameter port_b_read_enable_clock = "clock0"; +parameter mem_init0 = ""; +parameter mem_init1 = ""; +parameter mem_init2 = ""; +parameter mem_init3 = ""; +parameter mem_init4 = ""; + +input [port_a_address_width-1:0] portaaddr; +input [port_b_address_width-1:0] portbaddr; +input [port_a_data_width-1:0] portadatain; +output [port_b_data_width-1:0] portbdataout; +input clk0, portawe, portbre; + +endmodule diff --git a/techlibs/intel_alm/common/mem_sim.v b/techlibs/intel_alm/common/mem_sim.v index f6f9ecb02..23ffc6c87 100644 --- a/techlibs/intel_alm/common/mem_sim.v +++ b/techlibs/intel_alm/common/mem_sim.v @@ -68,3 +68,37 @@ always @(posedge CLK1) assign B1DATA = mem[B1ADDR]; endmodule + +// The M10K +// -------- +// TODO + +module MISTRAL_M10K(CLK1, A1ADDR, A1DATA, A1EN, B1ADDR, B1DATA, B1EN); + +parameter CFG_ABITS = 10; +parameter CFG_DBITS = 10; + +input CLK1; +input [CFG_ABITS-1:0] A1ADDR, B1ADDR; +input [CFG_DBITS-1:0] A1DATA; +input A1EN, B1EN; +output reg [CFG_DBITS-1:0] B1DATA; + +reg [2**CFG_ABITS * CFG_DBITS - 1 : 0] mem = 0; + +specify + $setup(A1ADDR, posedge CLK1, 0); + $setup(A1DATA, posedge CLK1, 0); + + if (B1EN) (posedge CLK1 => (B1DATA : A1DATA)) = 0; +endspecify + +always @(posedge CLK1) begin + if (A1EN) + mem[(A1ADDR + 1) * CFG_DBITS - 1 : A1ADDR * CFG_DBITS] <= A1DATA; + + if (B1EN) + B1DATA <= mem[(B1ADDR + 1) * CFG_DBITS - 1 : B1ADDR * CFG_DBITS]; +end + +endmodule diff --git a/techlibs/intel_alm/common/quartus_rename.v b/techlibs/intel_alm/common/quartus_rename.v index 46ef2aa0d..926d2d64f 100644 --- a/techlibs/intel_alm/common/quartus_rename.v +++ b/techlibs/intel_alm/common/quartus_rename.v @@ -123,6 +123,51 @@ module MISTRAL_MLAB(input [4:0] A1ADDR, input A1DATA, A1EN, CLK1, input [4:0] B1 endmodule +module MISTRAL_M10K(A1ADDR, A1DATA, A1EN, CLK1, B1ADDR, B1DATA, B1EN); + +parameter CFG_ABITS = 10; +parameter CFG_DBITS = 10; + +input [CFG_ABITS-1:0] A1ADDR, B1ADDR; +input [CFG_DBITS-1:0] A1DATA; +input CLK1, A1EN, B1EN; +output [CFG_DBITS-1:0] B1DATA; + +// Much like the MLAB, the M10K has mem_init[01234] parameters which would let +// you initialise the RAM cell via hex literals. If they were implemented. + +cyclonev_ram_block #( + .operation_mode("dual_port"), + .logical_ram_name("MISTRAL_M10K"), + .port_a_address_width(CFG_ABITS), + .port_a_data_width(CFG_DBITS), + .port_a_logical_ram_depth(2**CFG_ABITS), + .port_a_logical_ram_width(CFG_DBITS), + .port_a_first_address(0), + .port_a_last_address(2**CFG_DBITS - 1), + .port_a_first_bit_number(0), + .port_b_address_width(CFG_ABITS), + .port_b_data_width(CFG_DBITS), + .port_b_logical_ram_depth(2**CFG_ABITS), + .port_b_logical_ram_width(CFG_DBITS), + .port_b_first_address(0), + .port_b_last_address(2**CFG_DBITS - 1), + .port_b_first_bit_number(0), + .port_b_address_clock("clock0"), + .port_b_read_enable_clock("clock0") +) _TECHMAP_REPLACE_ ( + .portaaddr(A1ADDR), + .portadatain(A1DATA), + .portawe(A1EN), + .portbaddr(B1ADDR), + .portbdataout(B1DATA), + .portbre(B1EN), + .clk0(CLK1) +); + +endmodule + + module MISTRAL_MUL27X27(input [26:0] A, B, output [53:0] Y); `MAC #(.ax_width(27), .ay_scan_in_width(27), .result_a_width(54), .operation_mode("M27x27")) _TECHMAP_REPLACE_ (.ax(A), .ay(B), .resulta(Y)); |