diff options
Diffstat (limited to 'techlibs/intel/cyclone10lp/cells_sim.v')
-rw-r--r-- | techlibs/intel/cyclone10lp/cells_sim.v | 137 |
1 files changed, 137 insertions, 0 deletions
diff --git a/techlibs/intel/cyclone10lp/cells_sim.v b/techlibs/intel/cyclone10lp/cells_sim.v new file mode 100644 index 000000000..f5a8aee2b --- /dev/null +++ b/techlibs/intel/cyclone10lp/cells_sim.v @@ -0,0 +1,137 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf <clifford@clifford.at> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +module VCC (output V); + assign V = 1'b1; +endmodule // VCC + +module GND (output G); + assign G = 1'b0; +endmodule // GND + +/* Altera Cyclone 10 LP devices Input Buffer Primitive */ +module cyclone10lp_io_ibuf + (output o, input i, input ibar); + assign ibar = ibar; + assign o = i; +endmodule // cyclone10lp_io_ibuf + +/* Altera Cyclone 10 LP devices Output Buffer Primitive */ +module cyclone10lp_io_obuf + (output o, input i, input oe); + assign o = i; + assign oe = oe; +endmodule // cyclone10lp_io_obuf + +/* Altera Cyclone IV (E) 4-input non-fracturable LUT Primitive */ +module cyclone10lp_lcell_comb + (output combout, cout, + input dataa, datab, datac, datad, cin); + + /* Internal parameters which define the behaviour + of the LUT primitive. + lut_mask define the lut function, can be expressed in 16-digit bin or hex. + sum_lutc_input define the type of LUT (combinational | arithmetic). + dont_touch for retiming || carry options. + lpm_type for WYSIWYG */ + + parameter lut_mask = 16'hFFFF; + parameter dont_touch = "off"; + parameter lpm_type = "cyclone10lp_lcell_comb"; + parameter sum_lutc_input = "datac"; + + reg [1:0] lut_type; + reg cout_rt; + reg combout_rt; + wire dataa_w; + wire datab_w; + wire datac_w; + wire datad_w; + wire cin_w; + + assign dataa_w = dataa; + assign datab_w = datab; + assign datac_w = datac; + assign datad_w = datad; + + function lut_data; + input [15:0] mask; + input dataa, datab, datac, datad; + reg [7:0] s3; + reg [3:0] s2; + reg [1:0] s1; + begin + s3 = datad ? mask[15:8] : mask[7:0]; + s2 = datac ? s3[7:4] : s3[3:0]; + s1 = datab ? s2[3:2] : s2[1:0]; + lut_data = dataa ? s1[1] : s1[0]; + end + + endfunction + + initial begin + if (sum_lutc_input == "datac") lut_type = 0; + else + if (sum_lutc_input == "cin") lut_type = 1; + else begin + $error("Error in sum_lutc_input. Parameter %s is not a valid value.\n", sum_lutc_input); + $finish(); + end + end + + always @(dataa_w or datab_w or datac_w or datad_w or cin_w) begin + if (lut_type == 0) begin // logic function + combout_rt = lut_data(lut_mask, dataa_w, datab_w, + datac_w, datad_w); + end + else if (lut_type == 1) begin // arithmetic function + combout_rt = lut_data(lut_mask, dataa_w, datab_w, + cin_w, datad_w); + end + cout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, 'b0); + end + + assign combout = combout_rt & 1'b1; + assign cout = cout_rt & 1'b1; + +endmodule // cyclone10lp_lcell_comb + +/* Altera D Flip-Flop Primitive */ +module dffeas + (output q, + input d, clk, clrn, prn, ena, + input asdata, aload, sclr, sload); + + // Timing simulation is not covered + parameter power_up="dontcare"; + parameter is_wysiwyg="false"; + + reg q_tmp; + wire reset; + reg [7:0] debug_net; + + assign reset = (prn && sclr && ~clrn && ena); + assign q = q_tmp & 1'b1; + + always @(posedge clk, posedge aload) begin + if(reset) q_tmp <= 0; + else q_tmp <= d; + end + assign q = q_tmp; + +endmodule // dffeas |