nextpnr -- a portable FPGA place and route tool =============================================== Supported Architectures ----------------------- - iCE40 Prequisites ----------- - CMake 3.3 or later - Modern C++11 compiler (`clang-format` required for development) - Qt5 or later (`qt5-default` for Ubuntu 16.04) - Python 3.5 or later, including development libraries (`python3-dev` for Ubuntu) - Boost libraries (`libboost-dev` or `libboost-all-dev` for Ubuntu) - Icestorm, with chipdbs installed in `/usr/local/share/icebox` - Latest git Yosys is required to synthesise the demo design Building -------- - Use CMake to generate the Makefiles (only needs to be done when `CMakeLists.txt` changes) - For a debug build, run `cmake -DCMAKE_BUILD_TYPE=Debug .` - For a debug build with HX1K support only, run ` cmake -DCMAKE_BUILD_TYPE=Debug -DICE40_HX1K_ONLY=1 .` - For a release build, run `cmake .` - Add `-DCMAKE_INSTALL_PREFIX=/your/install/prefix` to use a different install prefix to the default `/usr/local` - Use Make to run the build itself - For all binary targets, just run `make` - For just the iCE40 CLI&GUI binary, run `make nextpnr-ice40` - For just the iCE40 Python module, run `make nextpnrpy_ice40` - Using too many parallel jobs may lead to out-of-memory issues due to the significant memory needed to build the chipdbs - To install nextpnr, run `make install` Running -------- - To run the CLI binary, just run `./nextpnr-ice40` (you should see command line help) - To start the UI, run `./nextpnr-ice40 --gui` - The Python module is called `nextpnrpy_ice40.so`. To test it, run `PYTHONPATH=. python3 python/python_mod_test.py` - Run `yosys blinky.ys` in `ice40/` to synthesise the blinky design and produce `blinky.json`. - To place-and-route the blinky using nextpnr, run `./nextpnr-ice40 --hx1k --json ice40/blinky.json --pcf ice40/blinky.pcf --asc blinky.asc` Notes ------- - All code is formatted using `clang-format` according to the style rules in `.clang-format` (LLVM based with increased indent widths and brace wraps after classes). - To automatically format all source code, run `make clangformat`.