From 22e8b744dace15be42459ab00f5f140aa5368786 Mon Sep 17 00:00:00 2001
From: Clifford Wolf <clifford@clifford.at>
Date: Sun, 19 Aug 2018 15:21:04 +0200
Subject: Minor style changes in iceprog
Signed-off-by: Clifford Wolf <clifford@clifford.at>
---
iceprog/iceprog.c | 80 ++++++++++++++++++++++++++++---------------------------
1 file changed, 41 insertions(+), 39 deletions(-)
(limited to 'iceprog')
diff --git a/iceprog/iceprog.c b/iceprog/iceprog.c
index 6bbda1e..550a23d 100644
--- a/iceprog/iceprog.c
+++ b/iceprog/iceprog.c
@@ -20,6 +20,7 @@
* -------------------
* http://www.latticesemi.com/~/media/Documents/UserManuals/EI/icestickusermanual.pdf
* http://www.micron.com/~/media/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_32mb_3v_65nm.pdf
+ * http://www.ftdichip.com/Support/Documents/AppNotes/AN_108_Command_Processor_for_MPSSE_and_MCU_Host_Bus_Emulation_Modes.pdf
*/
#define _GNU_SOURCE
@@ -306,17 +307,20 @@ static void flash_release_reset()
set_gpio(1, 1);
}
-// FLASH chip select assert/deassert
+// FLASH chip select assert
// should only happen while FPGA reset is asserted
-static void flash_chip_select(bool en)
+static void flash_chip_select()
{
- if (en)
- set_gpio(0, 0);
- else
- set_gpio(1, 0);
+ set_gpio(0, 0);
}
-// SRAM reset is pretty much the same as flash_chip_select(true)
+// FLASH chip select deassert
+static void flash_chip_deselect()
+{
+ set_gpio(1, 0);
+}
+
+// SRAM reset is the same as flash_chip_select()
// For ease of code reading we use this function instead
static void sram_reset()
{
@@ -324,13 +328,11 @@ static void sram_reset()
set_gpio(0, 0);
}
+// SRAM chip select assert
// When accessing FPGA SRAM the reset should be released
-static void sram_chip_select(bool en)
+static void sram_chip_select()
{
- if (en)
- set_gpio(0, 1);
- else
- set_gpio(1, 1);
+ set_gpio(0, 1);
}
static void flash_read_id()
@@ -351,7 +353,7 @@ static void flash_read_id()
if (verbose)
fprintf(stderr, "read flash ID..\n");
- flash_chip_select(true);
+ flash_chip_select();
// Write command and read first 4 bytes
xfer_spi(data, len);
@@ -367,7 +369,7 @@ static void flash_read_id()
}
}
- flash_chip_select(false);
+ flash_chip_deselect();
// TODO: Add full decode of the JEDEC ID.
fprintf(stderr, "flash ID:");
@@ -379,26 +381,26 @@ static void flash_read_id()
static void flash_power_up()
{
uint8_t data[1] = { FC_RPD };
- flash_chip_select(true);
+ flash_chip_select();
xfer_spi(data, 1);
- flash_chip_select(false);
+ flash_chip_deselect();
}
static void flash_power_down()
{
uint8_t data[1] = { FC_PD };
- flash_chip_select(true);
+ flash_chip_select();
xfer_spi(data, 1);
- flash_chip_select(false);
+ flash_chip_deselect();
}
static uint8_t flash_read_status()
{
uint8_t data[2] = { FC_RSR1 };
- flash_chip_select(true);
+ flash_chip_select();
xfer_spi(data, 2);
- flash_chip_select(false);
+ flash_chip_deselect();
if (verbose) {
fprintf(stderr, "SR1: 0x%02X\n", data[1]);
@@ -459,9 +461,9 @@ static void flash_write_enable()
fprintf(stderr, "write enable..\n");
uint8_t data[1] = { FC_WE };
- flash_chip_select(true);
+ flash_chip_select();
xfer_spi(data, 1);
- flash_chip_select(false);
+ flash_chip_deselect();
if (verbose) {
fprintf(stderr, "status after enable:\n");
@@ -474,9 +476,9 @@ static void flash_bulk_erase()
fprintf(stderr, "bulk erase..\n");
uint8_t data[1] = { FC_CE };
- flash_chip_select(true);
+ flash_chip_select();
xfer_spi(data, 1);
- flash_chip_select(false);
+ flash_chip_deselect();
}
static void flash_64kB_sector_erase(int addr)
@@ -485,9 +487,9 @@ static void flash_64kB_sector_erase(int addr)
uint8_t command[4] = { FC_BE64, (uint8_t)(addr >> 16), (uint8_t)(addr >> 8), (uint8_t)addr };
- flash_chip_select(true);
+ flash_chip_select();
send_spi(command, 4);
- flash_chip_select(false);
+ flash_chip_deselect();
}
static void flash_prog(int addr, uint8_t *data, int n)
@@ -497,10 +499,10 @@ static void flash_prog(int addr, uint8_t *data, int n)
uint8_t command[4] = { FC_PP, (uint8_t)(addr >> 16), (uint8_t)(addr >> 8), (uint8_t)addr };
- flash_chip_select(true);
+ flash_chip_select();
send_spi(command, 4);
send_spi(data, n);
- flash_chip_select(false);
+ flash_chip_deselect();
if (verbose)
for (int i = 0; i < n; i++)
@@ -514,11 +516,11 @@ static void flash_read(int addr, uint8_t *data, int n)
uint8_t command[4] = { FC_RD, (uint8_t)(addr >> 16), (uint8_t)(addr >> 8), (uint8_t)addr };
- flash_chip_select(true);
+ flash_chip_select();
send_spi(command, 4);
memset(data, 0, n);
xfer_spi(data, n);
- flash_chip_select(false);
+ flash_chip_deselect();
if (verbose)
for (int i = 0; i < n; i++)
@@ -535,9 +537,9 @@ static void flash_wait()
{
uint8_t data[2] = { FC_RSR1 };
- flash_chip_select(true);
+ flash_chip_select();
xfer_spi(data, 2);
- flash_chip_select(false);
+ flash_chip_deselect();
if ((data[1] & 0x01) == 0) {
if (count < 2) {
@@ -575,18 +577,18 @@ static void flash_disable_protection()
// Write Status Register 1 <- 0x00
uint8_t data[2] = { FC_WSR1, 0x00 };
- flash_chip_select(true);
+ flash_chip_select();
xfer_spi(data, 2);
- flash_chip_select(false);
+ flash_chip_deselect();
flash_wait();
// Read Status Register 1
data[0] = FC_RSR1;
- flash_chip_select(true);
+ flash_chip_select();
xfer_spi(data, 2);
- flash_chip_select(false);
+ flash_chip_deselect();
if (data[1] != 0x00)
fprintf(stderr, "failed to disable protection, SR now equal to 0x%02x (expected 0x00)\n", data[1]);
@@ -997,7 +999,7 @@ int main(int argc, char **argv)
{
fprintf(stderr, "reset..\n");
- flash_chip_select(false);
+ flash_chip_deselect();
usleep(250000);
fprintf(stderr, "cdone: %s\n", get_cdone() ? "high" : "low");
@@ -1024,7 +1026,7 @@ int main(int argc, char **argv)
sram_reset();
usleep(100);
- sram_chip_select(true);
+ sram_chip_select();
usleep(2000);
fprintf(stderr, "cdone: %s\n", get_cdone() ? "high" : "low");
@@ -1064,7 +1066,7 @@ int main(int argc, char **argv)
fprintf(stderr, "reset..\n");
- flash_chip_select(false);
+ flash_chip_deselect();
usleep(250000);
fprintf(stderr, "cdone: %s\n", get_cdone() ? "high" : "low");
--
cgit v1.2.3