-- Copyright (C) 1996 Morgan Kaufmann Publishers, Inc

-- This file is part of VESTs (Vhdl tESTs).

-- VESTs is free software; you can redistribute it and/or modify it
-- under the terms of the GNU General Public License as published by the
-- Free Software Foundation; either version 2 of the License, or (at
-- your option) any later version. 

-- VESTs is distributed in the hope that it will be useful, but WITHOUT
-- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-- for more details. 

-- You should have received a copy of the GNU General Public License
-- along with VESTs; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA 

-- ---------------------------------------------------------------------
--
-- $Id: ch_05_ch_05_07.vhd,v 1.2 2001-10-26 16:29:33 paw Exp $
-- $Revision: 1.2 $
--
-- ---------------------------------------------------------------------

entity ch_05_07 is

end entity ch_05_07;


----------------------------------------------------------------


library ieee;  use ieee.std_logic_1164.all;

architecture test of ch_05_07 is

  signal clk, d : std_ulogic;

  constant Tpw_clk : delay_length := 10 ns;
  constant Tsu : delay_length := 4 ns;

begin


  process_05_3_c : process (clk, d) is
  begin

    -- code from book:

    if clk'event and (clk = '1' or clk = 'H')
      and (clk'last_value = '0' or clk'last_value = 'L') 
    then
      assert d'last_event >= Tsu
        report "Timing error: d changed within setup time of clk";
    end if;

    -- end of code from book

  end process process_05_3_c;


  ----------------


  process_05_3_d : process (clk, d) is
  begin

    -- code from book:

    assert (not clk'event) or clk'delayed'last_event >= Tpw_clk
      report "Clock frequency too high";

    -- end of code from book

  end process process_05_3_d;


  ----------------


  process_05_3_e : process is
  begin

    -- code from book:

    wait until clk = '1';

    -- end of code from book

    report "clk changed to '1'";
  end process process_05_3_e;


  ----------------


  stimulus_05_3_c_d : process is
  begin

    clk <= '1' after  15 ns,
           '0' after  30 ns,
           '1' after  40 ns,
           '0' after  50 ns,
           'H' after  60 ns,
           '0' after  70 ns,
           '1' after  80 ns,
           'L' after  90 ns,
           'H' after 100 ns,
           'L' after 120 ns,
           '1' after 125 ns, -- should cause error
           '0' after 130 ns; -- should cause error

    d <= '1' after  35 ns,
         '0' after  77 ns, -- should cause error
         '1' after 102 ns;

    wait;
  end process stimulus_05_3_c_d;


end architecture test;