From 9e3a6c4913ab66965f91233c58ae47dc542ee475 Mon Sep 17 00:00:00 2001 From: Carl-Daniel Hailfinger Date: Fri, 8 Oct 2010 12:40:09 +0000 Subject: Multiple unrelated changes CONFIG_BITBANG_SPI was not selected if CONFIG_NICINTEL_SPI was on by default. Wiki output was missing all flash chips if CONFIG_INTERNAL was not selected. Use correct type for toupper()/tolower()/isspace() functions. Specify software requirements in a generic way. Non-x86 compilation does not work with the default programmer set, so list the make parameters which result in a working build. Corresponding to flashrom svn r1203. Signed-off-by: Carl-Daniel Hailfinger Acked-by: Michael Karcher --- README | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'README') diff --git a/README b/README index 5b1799bc..a94cae8d 100644 --- a/README +++ b/README @@ -42,7 +42,11 @@ processing. Build Instructions ------------------ -To build flashrom you need to install the following packages or ports: +To build flashrom you need to install the following software: + + * pciutils+libpci (if you want support for mainboard or PCI device flashing) + * libusb (if you want FT2232 or Dediprog support) + * libftdi (if you want FT2232 support) Linux et al: @@ -111,6 +115,18 @@ To cross-compile on Linux for DOS: http://homer.rice.edu/~sandmann/cwsdpmi/csdpmi7b.zip and make sure CWSDPMI.EXE is in the current directory. +Processor architecture dependent features: + + On non-x86 architectures you have to disable a few programmers because they + use port-based I/O which is not directly available on non-x86. Please add + CONFIG_RAYER_SPI=no CONFIG_NIC3COM=no CONFIG_ATAHPT=no CONFIG_NICREALTEK=no \ + CONFIG_NICNATSEMI=no + as parameters to the "make" invocation. + Besides that, the internal programmer is only supported on x86 and MIPS. On + other architectures, please add + CONFIG_INTERNAL=no + as parameter to the "make" invocation. + Installation ------------ -- cgit v1.2.3