From fd8447045a690200ce3c5a4f29677d5a225a2174 Mon Sep 17 00:00:00 2001 From: Anastasia Klimchuk Date: Mon, 24 May 2021 10:07:56 +1000 Subject: serprog.c: Use braces in both branches of conditional statement As per the coding style, if one branch of a conditional statement needs braces, all other branches need to have braces as well. BUG=b:185191942 TEST=builds Change-Id: I4fdccbd66f0351af98811bf7c2d8e15f0a99d852 Signed-off-by: Anastasia Klimchuk Reviewed-on: https://review.coreboot.org/c/flashrom/+/54862 Tested-by: build bot (Jenkins) Reviewed-by: Angel Pons Reviewed-by: Edward O'Callaghan --- serprog.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/serprog.c b/serprog.c index a70a2895..e8c0d75a 100644 --- a/serprog.c +++ b/serprog.c @@ -564,8 +564,9 @@ int serprog_init(void) if (baud_str == NULL || *baud_str == '\0') { baud = -1; msg_pdbg("No baudrate specified, using the hardware's defaults.\n"); - } else + } else { baud = atoi(baud_str); // FIXME: replace atoi with strtoul + } if (strlen(device) > 0) { sp_fd = sp_openserport(device, baud); if (sp_fd == SER_INV_FD) { @@ -727,11 +728,11 @@ int serprog_init(void) goto init_err_cleanup_exit; } if (strlen(f_spi_suffix) == 1) { - if (!strcasecmp(f_spi_suffix, "M")) + if (!strcasecmp(f_spi_suffix, "M")) { f_spi_req *= 1000000; - else if (!strcasecmp(f_spi_suffix, "k")) + } else if (!strcasecmp(f_spi_suffix, "k")) { f_spi_req *= 1000; - else { + } else { msg_perr("Error: Garbage following 'spispeed' value.\n"); free(spispeed); goto init_err_cleanup_exit; @@ -747,17 +748,18 @@ int serprog_init(void) buf[2] = (f_spi_req >> (2 * 8)) & 0xFF; buf[3] = (f_spi_req >> (3 * 8)) & 0xFF; - if (sp_check_commandavail(S_CMD_S_SPI_FREQ) == 0) + if (sp_check_commandavail(S_CMD_S_SPI_FREQ) == 0) { msg_pwarn(MSGHEADER "Warning: Setting the SPI clock rate is not supported!\n"); - else if (sp_docommand(S_CMD_S_SPI_FREQ, 4, buf, 4, buf) == 0) { + } else if (sp_docommand(S_CMD_S_SPI_FREQ, 4, buf, 4, buf) == 0) { f_spi = buf[0]; f_spi |= buf[1] << (1 * 8); f_spi |= buf[2] << (2 * 8); f_spi |= buf[3] << (3 * 8); msg_pdbg(MSGHEADER "Requested to set SPI clock frequency to %u Hz. " "It was actually set to %u Hz\n", f_spi_req, f_spi); - } else + } else { msg_pwarn(MSGHEADER "Setting SPI clock rate to %u Hz failed!\n", f_spi_req); + } } free(spispeed); bt = serprog_buses_supported; @@ -871,10 +873,12 @@ int serprog_init(void) if (sp_docommand(S_CMD_S_PIN_STATE, 1, &en, 0, NULL) != 0) { msg_perr("Error: could not enable output buffers\n"); goto init_err_cleanup_exit; - } else + } else { msg_pdbg(MSGHEADER "Output drivers enabled\n"); - } else + } + } else { msg_pdbg(MSGHEADER "Warning: Programmer does not support toggling its output drivers\n"); + } sp_prev_was_write = 0; sp_streamed_transmit_ops = 0; -- cgit v1.2.3