aboutsummaryrefslogtreecommitdiffstats
path: root/nicintel_eeprom.c
Commit message (Collapse)AuthorAgeFilesLines
* opaque_master: Use new API to register shutdown functionAnastasia Klimchuk2021-08-251-7/+3
| | | | | | | | | | | | | | | | | | | | | | | This allows opaque masters to register shutdown function in opaque_master struct, which means there is no need to call register_shutdown in init function, since this call is now a part of register_opaque_master. As a consequence of using new API, two things are happening here: 1) No resource leakage anymore in case register_shutdown() would fail, 2) Fixed propagation of register_opaque_master() return values. BUG=b:185191942 TEST=1) builds and ninja test including CB:56413 2) on ARMv7 device flashrom -p linux_mtd -V -> using linux_mtd, chip found Change-Id: Id8471a117556edcbf9694752fabe05cf4501ce70 Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/56825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* opaque_master: Move shutdown function above opaque_master structAnastasia Klimchuk2021-08-171-14/+14
| | | | | | | | | | | | | | | | | | This patch prepares opaque masters to use new API which allows to register shutdown function in opaque_master struct. See also later patch in this chain, where opaque masters are converted to new API. BUG=b:185191942 TEST=builds and ninja test Comparing flashrom binary before and after the patch, make clean && make CONFIG_EVERYTHING=yes VERSION=none binary is the same Change-Id: I5000cfceeba859a76177a17c1cb7d1c1e9fc03fe Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/56824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* nicintel_eeprom: Check UNPROG_DEVICE in 82580 shutdownAnastasia Klimchuk2021-08-171-14/+24
| | | | | | | | | | | | | | | | | | | | | | | | | Previously shutdown function was registered conditionally for 82580, only if the device was not UNPROG_DEVICE. This patch moves the check for UNPROG_DEVICE into shutdown function itself, so that shutdown function can be always registered for 82580. This also fixes a memory leak in nicintel_ee_shutdown_82580. No changes for i210 device init/shutdown, only for 82580. And very importantly this unlocks API change which plans to move register_shutdown inside register_opaque_master, similar to what's done in CB:56103 BUG=b:185191942 TEST=builds Change-Id: I5c729a3a63d0106e65525a6a77b2f9104c96847f Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/56821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* nicintel_eeprom: Delete extra parentheses from if conditionAnastasia Klimchuk2021-08-171-1/+1
| | | | | | | | | | | | BUG=185191942 TEST=builds Change-Id: I068bd227668a79f14e38e703a5a49db18d5de8c7 Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/56820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* programmer_table: move each entry to the associated programmer sourceThomas Heijligen2021-06-101-2/+12
| | | | | | | | | Change-Id: I3d02bd789f0299e936eb86819b3b15b5ea2bb921 Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/52946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* programmer: Smoothen register_opaque_master() APIAnastasia Klimchuk2021-05-231-2/+2
| | | | | | | | | | | | | | | | It was impossible to register a const struct opaque_master that would point to dynamically allocated `data`. Fix that so that we won't have to create more mutable globals. BUG=b:185191942 TEST=builds Change-Id: Id3adb4cf04ae04dbe87ddb96f30871cb5f7c8ff0 Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/54170 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* nicintel_eeprom.c: Mark 8086:1531 as testedAngel Pons2021-05-131-1/+1
| | | | | | | | | | | | Reading, erasing and writing works on an i210 NIC of an Asus Z10PA-D8. Change-Id: I9cabea5dfb9424b9c30d82840089506f2bd943da Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/52825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* nicintel_eeprom: Reduce usage of is_i210()Nico Huber2019-12-101-44/+50
| | | | | | | | | | | | | Don't entagle the code paths for the two NIC classes if it's not necessary. Only compile tested. Change-Id: I59164ccf54afbbd64a0598282d13e80ff7fd6fa4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/33637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* Remove address from GPLv2 headersElyes HAOUAS2018-04-241-3/+0
| | | | | | | | Change-Id: I7bfc339673cbf5ee2d2ff7564c4db04ca088d0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* fixup! nicintel_eeprom: Support for I210 emulated EEpromNico Huber2017-10-201-2/+7
| | | | | | | | | | Fix is_i210(), add a comment and break an overlong line. Change-Id: I5d3f71e4e0f77cc8793e7f395baf69e1fad930a3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
* fixup! nicintel_eeprom: Support for I210 emulated EEpromDavid Hendricks2017-10-031-2/+4
| | | | | | | | | | | | A couple of C99-style variable declarations within loops are causing compilation failures on some systems (gcc 4.9.2-10 on Raspbian). This moves them to make gcc happy. Change-Id: Ib7ad5a69244e462f84eae93df9e841716e089b31 Signed-off-by: David Hendricks <david.hendricks@gmail.com> Reviewed-on: https://review.coreboot.org/21702 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* nicintel_eeprom: Support for I210 emulated EEpromRicardo Ribalda Delgado2017-09-171-6/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the I210 family there is no MAC EEprom, instead there is a big flash (typically around 16Mb) with contents of the old MAC plus other stuff. There is an interface to program the whole flash, but once it is programmed it enters a "Secure Mode" that disables the interface. Luckily, the section with the MAC can still be updated via the EEprom interface. This patch adds support for this interface. root@qt5022-fglrx:~# ./flashrom -p nicintel_eeprom:pci=01:0.0 -w kk.raw -V flashrom v0.9.9-unknown on Linux 4.10.0-qtec-standard (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.4.1, GCC 5.3.0, little endian Command line (5 args): ./flashrom -p nicintel_eeprom:pci=01:0.0 -w kk.raw -V Calibrating delay loop... OS timer resolution is 1 usecs, 1856M loops per second, 10 myus = 10 us, 100 myus = 102 us, 1000 myus = 1017 us, 10000 myus = 10044 us, 4 myus = 4 us, OK. Initializing nicintel_eeprom programmer Found "Intel I210 Gigabit Network Connection" (8086:1533, BDF 01:00.0). Requested BAR is of type MEM, 32bit, not prefetchable Requested BAR is of type MEM, 32bit, not prefetchable The following protocols are supported: Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found Programmer flash chip "Opaque flash chip" (4 kB, Programmer-specific) on nicintel_eeprom. Found Programmer flash chip "Opaque flash chip" (4 kB, Programmer-specific). Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:W Erase/write done. Verifying flash... VERIFIED. Change-Id: I553f33e5dcb4412d682fc93095b29bcfed11713c Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-on: https://review.coreboot.org/21431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
* Add a bunch of new/tested stuff and various small changes 22Stefan Tauner2015-02-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - AOpen UK79G-1394 (used in EZ18 barebones) Reported by Lawrence Gough - ASUS M4N78 SE Reported by Dima Veselov - ASUS P5LD2-VM Mark board enable as tested (reported by Dima Veselov) - GIGABYTE GA-970A-UD3P (rev. 2.0) Reported by trucmar on IRC - GIGABYTE GA-990FXA-UD3 (rev. 4.0) Reported by ROKO__ on IRC - GIGABYTE GA-H77-DS3H (rev. 1.1) Reported by Evgeniy Edigarev - GIGABYTE GA-P55-USB3 (rev. 2.0) Reported by Måns Thörnqvist - MSI MS-7817 (H81M-E33) Reported by Igor Kolker Chipsets: - Marked Intel Bay Trail (0x0f1c) as tested OK Reported by Antonio Ospite - Refine Intel IDs * Add IDs for Braswell * Add IDs for 9 Series PCHs (e.g. H97, Z97) * Rename Wellsburg devices slightly Flash chips: - Atmel AT25DF041A to PREW (+PREW) Reported by Tai-hwa Liang - Atmel AT26DF161 to PREW (+EW) Reported by Steve Shenton - Atmel AT45DB011D to PREW (+PREW) Reported by The Raven - Atmel AT45DB642D to PREW (+PREW) Reported by Mahesh Mokal - Eon EN25F32 to PREW (+PREW) Reported by Arman Khodabande - Eon EN25F40 to PREW (+REW) Reported by Jerrad Pierce - Eon EN25QH16 to PREW (+EW) Reported by Ben Johnson - GigaDevice GD25Q20(B) to PREW (+PREW) Reported by Gilles Aurejac - Macronix MX25U6435E/F to PR (+PR) Reported by Matt Taggart - PMC Pm25LV512(A) to PREW (+PREW) Reported by The Raven - SST SST39VF020 to PREW (+PREW) Reported by Urja Rannikko - Winbond W25Q40.V to PREW (+EW) Reported by Torben Nielsen - Add E variants of MX25Lx006 (MX25L2006E, MX25L4006E, MX25L8006E). - Add MX25L6465E variant. - There was never a MX25L12805 AFAICT. - Split MX25L12805 from models with the same ID but an additional 32 kB eraser: MX25L12835F/MX25L12845E/MX25L12865E. - Add a bunch of ST parallel NOR flash chip IDs. Miscellaneous: - Whitelist ThinkPad X200. - Constify master parameter of register_master(). - Remove FEATURE_BYTEWRITES because it was never used at all. - Refine hwseq messages and make them less prominent. - Fix the yet unused PRIxCHIPADDR format string thingy. - Fix copy&paste error in spi_prettyprint_status_register_bp(). Spotted by Pablo Cases. - Add an additional SMBus controller revision to identify another Yangtze model. Thanks to Dan Christensen for reporting this issue. - dediprog: add missing include for stdlib.h. This fixes (at least) building on FreeBSD and DragonflyBSD with gcc. - Remove references to struct pci_filter from programmer.h. It is only needed in internal.c where it has a complete type. Having it in programmer.h provokes a warning by some old versions of gcc. - Tiny other stuff. Corresponding to flashrom svn r1879. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Shadowing fix in nicintel_eeprom.c for ancient libpciStefan Tauner2015-01-251-8/+8
| | | | | | | | | | | Very old versions (<2.2) of pciutils had a typedef named "word" in types.h. That does not play well with previous local variable names of nicintel_eeprom.c. Corresponding to flashrom svn r1874. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Refinements for DragonflyBSDStefan Tauner2015-01-101-5/+5
| | | | | | | | | | | | | - /usr/include/cpu/param.h defines PAGE_MASK already, hence use another name for the respective macro in nicintel_eeprom.c. - Since DragonflyBSD 3.6 DPorts is used as the default package manager. Therefore we should use /usr/local/ instead of /usr/pkg/ on default to fetch libraries. Corresponding to flashrom svn r1866. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add new programmer for SPI EEPROMs attached to Intel 82580 NICsRicardo Ribalda Delgado2014-07-281-0/+331
This patch lets you read and write the EEPROM on 82580-based gigabit NIC cards. So far it has been tested on copper NICs only, but other variants employing this controller should work too. It is a nice substitution for the official eeupdate tool. Speed is quite decent: less than 4 seconds for erases or writes of 32 kB. Corresponding to flashrom svn r1832. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>