| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The build system handles the decision when to build a file.
Extra compile guards for the source files are not necessary.
Change-Id: I76a76e05c7a7dd27637325ab1e9d8946fd5f9076
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/57797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This allows spi masters to register shutdown function in spi_master
struct, which means there is no need to call register_shutdown in init
function, since this call is now a part of register_spi_master.
As a consequence of using new API, two things are happening here:
1) No resource leakage anymore in case register_shutdown() would fail,
2) Fixed propagation of register_spi_master() return values.
Basic testing: when I comment out free(data) in linux_spi_shutdown, test
fails with error
../linux_spi.c:235: note: block 0x55a4db276510 allocated here
ERROR: linux_spi_init_and_shutdown_test_success leaked 1 block(s)
Means, shutdown function is invoked.
BUG=b:185191942
TEST= 1) builds and ninja test including CB:56911
2) On ARMv7 device
flashrom -p linux_spi -V
-> using linux_spi, chip found
3) On x86_64 AMD device
flashrom -p internal -V
-> this is actually using sb600spi, chip found
Change-Id: Ib60300f9ddb295a255d5ef3f8da0e07064207140
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/56103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch prepares spi masters to use new API which allows to
register shutdown function in spi_master struct. See also later
patch in this chain, where spi masters are converted to new API.
BUG=b:185191942
TEST=builds and ninja test
Comparing flashrom binary before and after the patch,
make clean && make CONFIG_EVERYTHING=yes VERSION=none
binary is the same
Change-Id: I50716686552b4ddcc6089d5afadb19ef59d9f9b4
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/56101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Spelling out the struct type name hurts readability and introduces
opportunities for bugs to happen when the pointer variable type is
changed but the corresponding sizeof is (are) not.
TEST=`make CONFIG_EVERYTHING=yes CONFIG_JLINK_SPI=no VERSION=none -j`
with and without this patch; the flashrom executable does not change.
Change-Id: Icc0b60ca6ef9f5ece6ed2a0e03600bb6ccd7dcc6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/55266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
Pass pointers to dynamically allocated data to register_spi_master().
This way we can avoid some mutable globals.
Change-Id: Id7821f1db3284b7b5b3d0abfd878b979c53870a1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/54067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It was impossible to register a const struct spi_master that would
point to dynamically allocated `data`. Fix that so that we won't
have to create more mutable globals.
Change-Id: I0c753b3db050fb87d4bbe2301a7ead854f28456f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/54066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The local state inhabited within the state tracker has now obvious scope
and therefore we can drop the redundant prefix for readability.
BUG=b:173477683
TEST=builds
Change-Id: Ic1c9647ef640152417a66dbb411554b83e30ad75
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/47663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Make use of the reneterent framework by moving singleton static
state out of the global life-time and into a per-spi_master basis.
This allows for the it87spi master to be reneterent and its internal
state's life-time to be correctly handled by Flashrom's core dispatch
logic.
BUG=b:173477683
TEST=builds
Change-Id: I6e9c3e6f12e51e456ee237c389cc326c64a71999
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/47662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reshuffle file with no semantic changes, this avoids unnecessary
prototypes for static member functions as to pave the way for further
cleanups as well as an easier to parse implementation.
BUG=b:173477683
TEST=builds
Change-Id: I94b169d19cb29336bb9cb4c16d0efee15b1e14c2
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/47661
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
The memory for the `param` string is aliased by `dualbiosindex_suffix`.
Moreover, `errno` could have been modified by the call to `free()`.
Therefore, only free the former when there are no more uses of either.
Change-Id: I79f18f6077c77c0cbb8bfa431e17f9b079f11c95
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/46551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
|
|
|
|
|
|
|
|
|
|
| |
default_spi_read() calls spi_read_chunked() with the correct
max_read value of 3 set in the spi master struct.
Change-Id: I199c81e1ba501e86dbfb7cf18e2d1556e30db62e
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/46233
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ChromiumOS flashrom fork has since const'ify flashctx
in a few places. This aligns the function signatures to
match with downstream to ease forward porting patches
out of downstream back into mainline flashrom.
This patch is minimum viable alignment and so feedback is
welcome.
Change-Id: Iff6dbda13cb0d941481c0d204b9c30895630fbd1
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/40324
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
| |
Mostly by changing to `unsigned` types where applicable, sometimes
`signed` types, and casting as a last resort.
Change-Id: I08895543ffb7a48058bcf91ef6500ca113f2d305
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/30409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
|
|
|
|
|
|
|
|
|
|
| |
Not needed anymore. Drop it fast before it encourages anyone to
violate layers again!
Change-Id: I8eda93b429e3ebaef79e22aba76be62987e496f4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/33651
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
None of these functions are used outside of the files they are defined
in, so make them all static.
Change-Id: Ie9cbe12d289bcedacf2f1bf483ae64ef8039ccc1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/33667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
|
|
|
|
|
|
| |
Change-Id: I8aa3e2992f64906edc669060936f9522d32637fb
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/33649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
|
|
|
|
|
|
|
| |
Change-Id: I1ff9418bcf150558ce7c97fafa3a68e5fa59f11e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
|
|
|
|
|
|
| |
Change-Id: I7bfc339673cbf5ee2d2ff7564c4db04ca088d0a4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Register_programmer suggests that we register a programmer. However,
that function registers a master for a given bus type, and a programmer
may support multiple masters (e.g. SPI, FWH). Rename a few other
functions to be more consistent.
Corresponding to flashrom svn r1831.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1789.
Inspired by and mostly based on a patch
Signed-off-by: Mark Marshall <mark.marshall@omicron.at>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested mainboards:
OK:
- abit BX6 2.0
Reported by Stefan Tauner
- Acer EM61SM/EM61PM (used in Acer Aspire T180)
Reported by Benjamin Bellec
- ADLINK Express-HR
Reported by Obermair Thomas
- ASUS M3N-H/HDMI
Reported by Franc Serres
- Attro G5G100-P
Reported by Christoph Grenz
- ASRock 960GM-GS3 FX
Reported by Fuley Istvan
- Elitegroup P6BAP-A+ (V2.2)
Reported by Arnaldo Pirrone
- Elitegroup GeForce7050M-M (V2.0)
Reported by Leif Middelschulte
- Fujitsu D3041-A1 (used in ESPRIMO P2560)
Reported by Daggi Duck
- GIGABYTE GA-8S648
Reported by TeslaBIOS
- GIGABYTE GA-970A-D3P (rev. 1.0)
Reported by Jean-Francois Pirus
- GIGABYTE GA-B85M-D3H
Reported by Mladen Milinković
- GIGABYTE GA-X79-UD3
Reported by Jeff O'Neil
- GIGABYTE GA-X79-UP4 (rev. 1.0)
Reported by George Spelvin
- GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3)
Reported by Vangelis Skarmoutsos
- GIGABYTE GA-Z87-HD3
Reported by virii5
- Lenovo Tilapia CRB
Reported by jenkins56 on IRC
- MSI GT60-2OD (notebook, only with layout patches)
Reported by Vasiliy Vylegzhanin
- MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid)
Reported by professorll
- MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640)
Reported by Koen Rousseau
- MSI MS-7125 (K8N Neo4(-F/FI/FX))
We had a board enable for that one for years, but it was not (and still is not)
completely clear which boards are covered.
- MSI MS-7522 (MSI X58 Pro-E)
Reported by Gianluigi Tiesi
- PCWARE APM80-D3
Reported by César Augusto Jakoby
- Pegatron IPP7A-CP
Reported by Илья Шипко
- Supermicro H8QME-2
Reported by Greg Tippitt
- Supermicro X7SPA-H
Reported by Kyle Bentley
- Supermicro X7SPE-HF-D525
Reported by Micah Anderson
- Supermicro X8DTE
Reported by Mark Nipper
- Supermicro X8SIL-F
Reported by Peter Samuelson
- ZOTAC IONITX-A (-E) version
Reported by Maciej Wroniecki
NOT OK:
- Supermicro X10SLM-F
Reported by Micah Anderson
Flash chips:
- Atmel AT29C020 to PREW (+PREW)
It was marked like that in the past, but I could not find the reason why the
test bits were reset. Urja Rannikko tested it again and it still works.
- Eon EN25F10 to PREW (+PREW)
Reported by Stolmár Tamás
- Eon EN25QH64 to PR (+PR)
Reported by Vladimir 'φ-coder' Serbinenko
- GigaDevice GD25Q32(B) to PREW (+PREW)
Reported by mrnuke
- Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW)
Reported by Jamie Nichol
- Macronix MX25L2005(C) to PREW (+PREW)
Reported by Давыдов Дмитрий
- Micron/Numonyx/ST N25Q064..1E to PREW (+PREW)
Reported by Paolo Zambotti
- Pmc Pm25LD010(C) to PREW (+PREW)
Reported by Vasile Ceteras
- Micron/Numonyx/ST M25P16 to PREW (+EW)
Reported by raven
- Micron/Numonyx/ST M25PX64 to PREW (+W)
Reported by Zaolin
- SST SST25VF020B to PREW (+PREW)
Reported by Michaël Zweers
- SST SST49LF040 to PREW (+W)
Reported by Oskar Enoksson
- Add support for MX25L3273E (evil twin of MX25L3205 et al.)
Also, add MX25L1673 and MX25L6473E to the names of their twins and
add a note about MX25L8073E.
- Winbond W25X32 to PREW (+REW)
Reported by The Raven
- Winbond W29C010 etc. to PREW (+W)
Reported by san
Chipsets tested OK:
- Intel NM70 (8086:1e5f)
Reported by mrnuke
- Intel C204 (8086:1c54)
Reported by Vasiliy Vylegzhanin
- Intel QM67 (8086:1c4f)
Reported by Obermair Thomas
- Intel HM77 (8086:1e57)
Reported by Vasiliy Vylegzhanin
- Intel B85 (8086:8c50)
Reported by Mladen Milinković
- Intel HM87 (8086:8c4b)
Reported by Vasiliy Vylegzhanin
- Intel Z87 (8086:8c44)
Reported by virii5
- NVIDIA MCP51 (10de:0261)
Reported by Marcin Kościelnicki
- SiS 648 (1039:0648)
Reported by TeslaBIOS
Miscellaneous:
- Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_).
- getrevision.sh: Ignore failing date calls.
- getrevision.sh: Fix -u and -l for older git versions which require = for the
git log grep parameter.
- Corrected K8T Neo2-F entries due to a report from Stelios Tsampas.
- Add "-p internal" to output that requests users to send flashrom -V logs.
- Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist.
- Tiny other stuff.
Corresponding to flashrom svn r1783.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Thanks to Vadim Girlin for finding out how to do that.
This is known to work on GA-MA770-UD3, GA-B75M-D3V, GA-B75N and
GA-H61M-S1 (only M_BIOS is populated).
Corresponding to flashrom svn r1720.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Damien Zammit <damien@zamaudio.com>
Tested-by: Anton Kochkov <anton.kochkov@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested Mainboards:
OK:
- Acer V75-M (used in IBM Aptiva 2170-G)
http://www.flashrom.org/pipermail/flashrom/2012-December/010300.html
- Acorp 6M810C
http://www.flashrom.org/pipermail/flashrom/2013-January/010433.html
- ASRock G31M-S rev 2.0
http://www.flashrom.org/pipermail/flashrom/2013-February/010538.html
- ASUS F1A75-V PRO
http://paste.flashrom.org/view.php?id=1528
- ASUS M5A97 (rev. 1.0)
http://www.flashrom.org/pipermail/flashrom/2013-February/010483.html
- ASUS P5KPL-AM IN/GB
http://www.flashrom.org/pipermail/flashrom/2013-January/010455.html
- GABYTE GA-H77M-D3H
http://www.flashrom.org/pipermail/flashrom/2013-February/010538.html
NOT OK:
- GIGABYTE GA-Z77MX-D3H
http://paste.flashrom.org/view.php?id=1529
http://paste.flashrom.org/view.php?id=1530
Tested flash chips:
- Winbond W25X10 to PREW (+PREW)
Reported on IRC(?)
- Eon EN25Q32(A/B) to PREW (+REW)
http://www.flashrom.org/pipermail/flashrom/2013-February/010533.html
- Eon EN25Q64 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2013-January/010466.html
Miscellaneous:
- Fix superflouos line breaks in wiki mainboard and laptop output.
- Use the .nh (no hyphenation) command in the manpage to enforce
single-line URLs where useful.
- Reference the manpage (besides the Laptops wiki page) in the laptop warning.
- Minor output and whitespace fixes.
- Add Fidelix IDs.
- Add ISSE clones of PMC chips.
- Fix typo: EMST -> ESMT.
- Add ID of ESMT F25D08QA.
- Refine GigaDevice GD25Q series (missing voltages and comments).
- Use underscore instead of lower-case x as wildcard in Sharp chip names.
Corresponding to flashrom svn r1650.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch just fixes a limited number of bits not conforming to c99 by using
- __asm__ instead of just asm
- {0} instead of {} for struct initialization
- h_addr_list[0] instead of h_addr to access the host address in
struct hostent
- #include <strings.h> where needed (for ffs and strcasecmp)
Based on a previous patch by Carl-Daniel.
Corresponding to flashrom svn r1585.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
| |
All the driver conversion work and cleanup has been done by Stefan.
flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel.
Corresponding to flashrom svn r1579.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move hwaccess.h #include from flash.h to individual drivers.
libflashrom users need flash.h, but they do not care about hwaccess.h
and should not see its definitions because they may conflict with
other hardware access functions and #defines used by the libflashrom
user.
Corresponding to flashrom svn r1549.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently spi_aai_write() is implemented without an abstraction
mechanism for the programmer driver. This adds another function
pointer 'write_aai' to struct spi_programmer, which is set to
default_spi_write_aai (renamed spi_aai_write) for all programmers
for now.
A patch which utilises this abstraction in the dediprog driver will
follow.
Corresponding to flashrom svn r1543.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1532.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ITE IT87 SPI driver uses a trick to speed up reading and writing:
If a flash chip is 512 kByte or less, the flash chip can be completely
mapped in memory and both read and write accesses are faster that way.
The current IT87 SPI code did use the parallel programmer interface for
memory mapped reads and writes, but that's the wrong abstraction. It has
been fixed to use mmio_read*/mmio_write* for that purpose.
The Winbond W83627 SPI driver uses the same trick in its read path for
all supported chip sizes. Fix it the same way.
Switch internal_chip_readn to use mmio_readn as proper abstraction.
Kudos to Michael Karcher for spotting the bugs.
Tested-by: Johan Svensson <flashrom.js@crypt.se>
Corresponding to flashrom svn r1511.
Reported-by: Johan Svensson <flashrom.js@crypt.se>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All programmer access function prototypes except init have been made
static and moved to the respective file.
A few internal functions in flash chip drivers had chipaddr parameters
which are no longer needed.
The lines touched by flashctx changes have been adjusted to 80 columns
except in header files.
Corresponding to flashrom svn r1474.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Struct flashchip is used only for the flashchips array and for
operations which do not access hardware, e.g. printing a list of
supported flash chips.
struct flashctx (flash context) contains all data available in
struct flashchip, but it also contains runtime information like
mapping addresses. struct flashctx is expected to grow additional
members over time, a prime candidate being programmer info.
struct flashctx contains all of struct flashchip with identical
member layout, but struct flashctx has additional members at the end.
The separation between struct flashchip/flashctx shrinks the memory
requirement of the big flashchips array and allows future extension
of flashctx without having to worry about bloat.
Corresponding to flashrom svn r1473.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
| |
Push those changes forward where needed to prevent new sign
conversion warnings where possible.
Corresponding to flashrom svn r1470.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
registered
All programmers are now calling programmer registration functions and
direct manipulations of buses_supported are not needed/possible anymore.
Note: Programmers without parallel/LPC/FWH chip support should not call
register_par_programmer().
Additional fixes:
Set max_rom_decode.parallel for drkaiser.
Remove abuse of programmer_map_flash_region in it85spi.
Annotate several FIXMEs in it85spi.
Corresponding to flashrom svn r1463.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- probe_timing was changed to unsigned although we use negative values
for special cases
- some code was not changed along hence did no longer compile:
* dediprog's read and write functions
* linux_spi's read and write functions
- it introduced a number of new sign conversion warnings
(http://paste.flashrom.org/view.php?id=832)
To be safe this patch reverts all changes made in r1448, a corrected
patch will follow later.
Thanks to idwer for pointing out the problem first!
Corresponding to flashrom svn r1450.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1448.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Bugfix: Do not accept multiple conflicting --programmer selections.
Restriction: Do not accept multiple --programmer selections even if
there is no conflict.
Unexport the programmer variable.
programmer_init requires the programmer as first parameter.
The default programmer selection is now part of cli_classic.
Corresponding to flashrom svn r1433.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Mixing uninitialized and initialized local variables leads to
confusion.
- ft2232_spi error cases should have gotten some error handling, and
that's the reason the curly braces were there.
- Fixing typos/wording in some places would have been nice given that
those places were touched anyway.
Corresponding to flashrom svn r1413.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Also, indentation fixes, e.g. due to conversion to msg_*, use ARRAY_SIZE
where possible, wrap overly long line, etc.
Compile-tested. There should be no functional changes.
Corresponding to flashrom svn r1397.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
| |
It's shorter to type, and we have less problems with the 80 column limit.
Corresponding to flashrom svn r1396.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove the array spi_programmer, replace it by dynamic registration
instead. Also initially start with no busses supported, and switch to
the default non-SPI only for the internal programmer.
Also this patch changes the initialization for the buses_supported variable
from "everything-except-SPI" to "nothing". All programmers have to set the
bus type on their own, and this enables register_spi_programmer to just add
the SPI both for on-board SPI interfaces (where the internal programmer
already detected the other bus types), as well as for external programmers
(where we have the default "none").
Corresponding to flashrom svn r1299.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Flashrom currently only supports exactly one Super I/O or Embedded
Controller, and this means quite a few notebooks and a small subset of
desktop/server boards cannot be handled reliably and easily.
Allow detection and initialization of up to 3 Super I/O and/or EC chips.
WARNING! If a Super I/O or EC responds on multiple ports (0x2e and
0x4e), the code will do the wrong thing (namely, initialize the hardware
twice). I have no idea if we should handle such situations, and whether
we should ignore the second chip with identical ID or not. Initializing
the hardware twice for the IT87* family is _not_ a problem, but I don't
know how well IT85* can handle it (and whether IT85* would listen at
more than one port anyway).
Corresponding to flashrom svn r1289.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Thanks to Thomas Schneider for testing on a board with ITE IT87* SPI.
Test report (success) is here: http://paste.flashrom.org/view.php?id=379
Thanks to David Hendricks for testing on a Google Cr-48 laptop with
ITE IT85* EC SPI. Test report (success) is here:
http://www.flashrom.org/pipermail/flashrom/2011-April/006275.html
Acked-by: David Hendricks <dhendrix@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The bug was invisible so far because we always started at offset 0. The
pending partial write patch uses nonzero start offsets and trips over
this bug.
Clarify a few comments in IT87 SPI.
Thanks to Idwer Vollering for reporting write breakage with my latest
partial write patch. This should fix the underlying problem.
Corresponding to flashrom svn r1217.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The inner write functions which handle partial write are renamed to the
original name of their wrappers. The write wrappers are removed.
Corresponding to flashrom svn r1211.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Tested-by: Andrew Morgan <ziltro@ziltro.com>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Mark the following boards as tested:
- Tyan S2933 (Thunder n3600S) (reported by Pendic Peter <nigma@bluewin.ch>)
http://www.flashrom.org/pipermail/flashrom/2010-August/004375.html
- MSI MS-7642 (890GXM-G65) (reported by Alan McMahon <pam@aldersgate.co.uk>)
http://www.flashrom.org/pipermail/flashrom/2010-August/004393.html
- Shuttle X50/X50(B) (reported by Ed Driesen <ed@omts.be>)
http://www.flashrom.org/pipermail/flashrom/2010-August/004472.html
(the "B" variant is just black instead of white, no hardware differences
as far as I can see)
- ASUS M2NPV-VM (reported by Antti Palosaari <crope@iki.fi>)
http://www.flashrom.org/pipermail/flashrom/2010-August/004476.html
- ZOTAC ZBOX HD-ID11 (reported by s. ewgen <sewgen@gmail.com>)
http://www.flashrom.org/pipermail/flashrom/2010-August/004512.html
- ASRock A330GC (reported by Daniel Flinkmann <DFlinkmann@gmx.de>)
http://www.flashrom.org/pipermail/flashrom/2010-August/004517.html
- Congatec conga-X852 (reported by Mario Rogen <Mario.Rogen@sie.at>)
http://www.coreboot.org/pipermail/coreboot/2008-November/041433.html
- IEI PICOe-9452 (reported by Mario Rogen <Mario.Rogen@sie.at>)
http://www.coreboot.org/pipermail/coreboot/2008-November/041433.html
- Lex CV700A (reported by Mario Rogen <Mario.Rogen@sie.at>)
http://www.coreboot.org/pipermail/coreboot/2008-November/041433.html
- Portwell PEB-4700VLA (reported by Mario Rogen <Mario.Rogen@sie.at>)
http://www.coreboot.org/pipermail/coreboot/2008-November/041433.html
Mark the following chips as tested:
- SST SST39SF040 (reported by Mattias Mattsson <vitplister@gmail.com>)
http://www.flashrom.org/pipermail/flashrom/2010-August/004414.html
- Eon EN25F80 (reported by Ed Driesen <ed@omts.be>)
http://www.flashrom.org/pipermail/flashrom/2010-August/004472.html
- SyncMOS/MoselVitelic {F,S,V}29C51002T (reported by Mattias
Mattsson <vitplister@gmail.com>)
http://www.flashrom.org/pipermail/flashrom/2010-August/004475.html
- PMC Pm29F002T (reported by Tadas S <mrtadis@gmail.com>)
http://www.flashrom.org/pipermail/flashrom/2010-September/004583.html
Also:
- Fix a few whitespace issues and cosmetics while I'm at it.
- Add the board name (in addition to the Sxxxx number) to all Tyan boards.
Corresponding to flashrom svn r1153.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Programmer specific functions are of absolutely no interest to any file
except those dealing with programmer specific actions (special SPI
commands and the generic core).
The new header structure is as follows (and yes, improvements are
possible):
flashchips.h flash chip IDs
chipdrivers.h chip-specific read/write/... functions
flash.h common header for all stuff that doesn't fit elsewhere
hwaccess.h hardware access functions
programmer.h programmer specific functions
coreboot_tables.h header from coreboot, internal programmer only
spi.h SPI command definitions
Corresponding to flashrom svn r1112.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
| |
Actually check if the unlock worked instead of just assuming it worked.
Corresponding to flashrom svn r1082.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
| |
However, wrap the write functions in a compat layer to allow converting
the rest of flashrom later. Tested on Intel NM10 by David Hendricks.
Corresponding to flashrom svn r1080.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Autodetect the ITE IT8705 Super I/O and enable flash writes if it
performs LPC->Parallel translation. Remove board enables which triggered
the IT8705 write enable manually. Change the IT87 SPI special case to
cover IT87 LPC->SPI and LPC->Parallel translation.
Corresponding to flashrom svn r1073.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested on Syntax SV266A.
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested on Shuttle AK38N, all operations work fine.
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
| |
Make programmer_param static by converting all users to extract_programmer_param.
Programmer parameters can no longer be separated with a
colon, they have to be separated with a comma.
Corresponding to flashrom svn r1072.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
from programmer_param
This led to wildly differing syntax for programmer parameters, and
it also voids pretty much every assumption you could make about
programmer_param. The latter is a problem for libflashrom.
Use extract_param everywhere, clean up related code and make it more
foolproof. Add two instances of exit(1) where we have no option to
return an error. Remove six instances of exit(1) where returning an
error was possible.
WARNING: This changes programmer parameter syntax for a few programmers!
Corresponding to flashrom svn r1070.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|