aboutsummaryrefslogtreecommitdiffstats
path: root/ichspi.c
Commit message (Collapse)AuthorAgeFilesLines
* ichspi.c: add missing ICH9 register macros and eliminate magic numbersStefan Tauner2011-06-121-24/+33
| | | | | | | | | | | - add macros for FRAP, FREG0, PR0-PR4 and BBAR - eliminate magic numbers representing those registers and some other bits too - remove printing out the contents of FDOC because it is useless Corresponding to flashrom svn r1334. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Use the max_data_read field of the new spi_programmer struct to simplify ↵Stefan Tauner2011-06-111-25/+25
| | | | | | | | | | | | run_opcode Also, explain the transformation of the read/write array/count in ich_spi_send_command better. Corresponding to flashrom svn r1333. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* ichspi.c: add macros and pretty printing for HSFS and HSFCStefan Tauner2011-06-111-12/+62
| | | | | | | Corresponding to flashrom svn r1330. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* ichspi.c: add pretty printing for SSFS+SSFC and the OPCODE structStefan Tauner2011-06-111-6/+51
| | | | | | | Corresponding to flashrom svn r1329. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* ichspi.c: improve macros for SSFS and SSFC bitsStefan Tauner2011-06-111-21/+36
| | | | | | | | | | | | | | | - introduce offset macros and use them to (re)define the existing mask macros - fix masks of SSFC_COP, SSFC_DBC, SSFC_SCF (were single-bit masks erroneously) - add comments - rename SSFS_CDS to SSFS_FDONE (abbr. used in datasheet; not in SSFS but HSFS) - use those for refactoring and magic number elemination. following patch uses them for pretty printing. Corresponding to flashrom svn r1328. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Small fixesStefan Tauner2011-05-281-4/+5
| | | | | | | | | | | - missing spaces in code and output - improved documentation/naming/output - missing line breaks in spi probing functions Corresponding to flashrom svn r1321. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* ichspi: fix detection of unused regionsJoshua Roys2011-05-261-1/+1
| | | | | | | Corresponding to flashrom svn r1319. Signed-off-by: Joshua Roys <roysjosh@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Whitespace, documentation and other small stuffStefan Tauner2011-05-191-25/+30
| | | | | | | | | | | | | This patch combines three previously posted patches in a revised form. one is even stolen from Stefan Reinauer (remove umlauts from man page). Corresponding to flashrom svn r1317. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Signed-off-by: Stefan Reinauer <reinauer@google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Kill central list of SPI programmersMichael Karcher2011-05-111-14/+43
| | | | | | | | | | | | | | | | | | Remove the array spi_programmer, replace it by dynamic registration instead. Also initially start with no busses supported, and switch to the default non-SPI only for the internal programmer. Also this patch changes the initialization for the buses_supported variable from "everything-except-SPI" to "nothing". All programmers have to set the bus type on their own, and this enables register_spi_programmer to just add the SPI both for on-board SPI interfaces (where the internal programmer already detected the other bus types), as well as for external programmers (where we have the default "none"). Corresponding to flashrom svn r1299. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Factor out SPI write/read chunking wrappersMichael Karcher2011-05-111-20/+0
| | | | | | | Corresponding to flashrom svn r1298. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Revert MMIO space writes on shutdown as neededCarl-Daniel Hailfinger2011-05-031-16/+34
| | | | | | | | | | | | | | | | | | Reversible MMIO space writes now use rmmio_write*(). Reversible PCI MMIO space writes now use pci_rmmio_write*(). If a MMIO value needs to be queued for restore without writing it, use rmmio_val*(). MMIO space writes which are one-shot (e.g. communication with some chip) should continue to use the permanent mmio_write* variants. Corresponding to flashrom svn r1292. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> David tested it successfully on some NM10/ICH7 platforms which switch between SPI and LPC targets (x86 BIOS ROM vs. EC firmware ROM). Acked-by: David Hendricks <dhendrix@google.com>
* Improve output in case run_opcode failsStefan Tauner2011-04-291-5/+20
| | | | | | | Corresponding to flashrom svn r1291. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* ichspi: Increase timeout to 60s for atomic operationsMichael Karcher2011-04-291-4/+18
| | | | | | | Corresponding to flashrom svn r1290. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Proper error handling for ICH/VIA SPICarl-Daniel Hailfinger2011-03-171-22/+80
| | | | | | | | | | | | | | Use 16-bit values for bit masks in 16-bit registers. Check for SPI Cycle In Progress and wait up to 60 ms. Do not touch reserved bits. Reduce SPI cycle timeout from 60 s to 60 ms. Clear transaction errors caused by our own SPI accesses. Add better debugging in case the hardware misbehaves. Corresponding to flashrom svn r1281. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
* Convince compilers to put constant data into the .rodata sectionMathias Krause2011-01-171-2/+2
| | | | | | | | | | | | | | | | This patch reduces the stack usage by declaring 'const' stack variables as 'static const' so they end up in the .rodata section instead of being copied from there to the stack for every invocation of the corresponding function. As a plus we end up in having a smaller binary as the "copy from .rodata to stack" code isn't emitted by the compiler any more (roughly -100 bytes). Corresponding to flashrom svn r1252. Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Acked-by: Stefan Reinauer <stepan@coreboot.org>
* Dump all VIA SPI registers like for ICH7Carl-Daniel Hailfinger2010-11-241-7/+49
| | | | | | | | | | Handle BBAR on VIA. Handle SPI lockdown on VIA. Corresponding to flashrom svn r1236. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Rudolf Marek <r.marek@assembler.cz>
* Implement on-the-fly reprogramming of the ICH SPI OPCODE tableHelge Wagner2010-10-051-20/+79
| | | | | | | Corresponding to flashrom svn r1193. Signed-off-by: Helge Wagner <helge.wagner@ge.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for Intel 5 Series / 3400 Series chipsetsHelge Wagner2010-08-111-1/+3
| | | | | | | | | | | (At least) for the QM57 which i have tested an additional patch was needed as some reserved bits in the "Software Sequencing Flash Control Register" (SSFC) needs to be programmed to 1 in the QM57. Corresponding to flashrom svn r1137. Signed-off-by: Helge Wagner <helge.wagner@ge.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Split off programmer.h from flash.hCarl-Daniel Hailfinger2010-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | Programmer specific functions are of absolutely no interest to any file except those dealing with programmer specific actions (special SPI commands and the generic core). The new header structure is as follows (and yes, improvements are possible): flashchips.h flash chip IDs chipdrivers.h chip-specific read/write/... functions flash.h common header for all stuff that doesn't fit elsewhere hwaccess.h hardware access functions programmer.h programmer specific functions coreboot_tables.h header from coreboot, internal programmer only spi.h SPI command definitions Corresponding to flashrom svn r1112. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Move Intel SPI initialisation to ichspi.cMichael Karcher2010-07-221-3/+210
| | | | | | | | | | | Smarter version could decide whether SPI is vital or not depending on straps. Straps are currently implemented for ICH7. EP80579 is in the comment, PCH of 5 Series/3400 Series has "LPC, reserved, PCI, SPI". Corresponding to flashrom svn r1098. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Use generic unlocking infrastructure for SPI chipsCarl-Daniel Hailfinger2010-07-141-1/+0
| | | | | | | | | Actually check if the unlock worked instead of just assuming it worked. Corresponding to flashrom svn r1082. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Convert SPI chips to partial writeCarl-Daniel Hailfinger2010-07-141-23/+2
| | | | | | | | | | However, wrap the write functions in a compat layer to allow converting the rest of flashrom later. Tested on Intel NM10 by David Hendricks. Corresponding to flashrom svn r1080. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Kill global variables, constants and functions if local scope sufficesCarl-Daniel Hailfinger2010-07-031-12/+14
| | | | | | | | | | | | | | | | | | | | | | | Constify variables where possible. Initialize programmer-related variables explicitly in programmer_init to allow running programmer_init from a clean state after programmer_shutdown. Prohibit registering programmer shutdown functions before init or after shutdown. Kill some dead code. Rename global variables with namespace-polluting names. Use a previously unused locking helper function in sst49lfxxxc.c. This is needed for libflashrom. Effects on the binary size of flashrom are minimal (300 bytes shrinkage), but the data section shrinks by 4384 bytes, and that's a good thing if flashrom is operating in constrained envionments. Corresponding to flashrom svn r1068. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* ichspi: try harder to conform to address restrictionsCarl-Daniel Hailfinger2010-05-281-1/+49
| | | | | | | | | | | | | | ICH SPI can enforce address restrictions for all accesses which take an address (well, it could if the chipset implementation was not broken). Since exploiting the broken implementation is harder than conforming to the address restrictions wherever possible, conform to the address restrictions instead. This patch eliminates a lot of transaction errors people were seeing on chip probe. Corresponding to flashrom svn r1016. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Handle the following architectures in generic flashrom codeCarl-Daniel Hailfinger2010-05-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - x86/x86_64 (little endian) - PowerPC (big endian) - MIPS (big+little endian) No changes to programmer specific code. This means any drivers with MMIO access will _not_ suddenly start working on big endian systems, but with this patch everything is in place to fix them. Compilation should work on all architectures listed above for all drivers except nic3com and nicrealtek which require PCI Port IO which is x86-only for now. To compile without nic3com and nicrealtek, run make distclean make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no Thanks to Misha Manulis for testing early versions of this patch on PowerPC (big endian) with the satasii programmer. Thanks to Segher Boessenkool for design review and for helping out with compiler tricks and pointing out that we need eieio on PowerPC. Thanks to Vladimir Serbinenko for compile testing on MIPS (little endian) and PowerPC (big endian) and for runtime testing on MIPS (little endian). Thanks to David Daney for compile testing on MIPS (big endian). Thanks to Uwe Hermann for compile and runtime testing on x86_64. DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH! This patch only provides the infrastructure, but does not convert any drivers, so flashrom will compile, but it won't do the right thing on non-x86 platforms. Corresponding to flashrom svn r1013. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Misha Manulis <misha@manulis.com> Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
* Introduce a generic SPI read function: spi_write_chunked()Carl-Daniel Hailfinger2010-05-211-36/+10
| | | | | | | | | | | | | | | Every SPI programmer driver had its own completely different chip write implementation, and all of them were insufficiently commented. Create spi_write_chunked as a copy of spi_read_chunked and convert all SPI programmers to use it. No functional changes except: - Bus Pirate uses 12 Byte writes instead of 8 Byte writes - SB600 uses 5 Byte writes instead of 1 Byte writes Corresponding to flashrom svn r1005. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: David Hendricks <dhendrix@google.com>
* Convert various prints to use msg_p* and msg_g* respectivelySean Nelson2010-05-071-44/+35
| | | | | | | | | Convert programmer print messages to msg_p* convert general print messages to msg_g* a few fixes as suggested by Carl-Daniel. Corresponding to flashrom svn r997. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Polish the flashrom code comments and outputs a bitUwe Hermann2010-03-251-1/+1
| | | | | | | | | | | - Fix a number of typos (found via ispell). - Use correct vendor names (as per their websites) consistently. Corresponding to flashrom svn r985. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Split spi.c into programmer and chip code Remove chipdriver.h include from ↵Sean Nelson2010-02-261-0/+1
| | | | | | | | | | | | | | | | | | | flash.h Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c Corresponding to flashrom svn r914. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Rewrite substantial parts of the ICH SPI supportCarl-Daniel Hailfinger2010-02-111-53/+147
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This megapatch rewrites substantial parts of ICH SPI to actually do what the SPI layer wants instead of its own weird idea about commands (running unrequested commands, running modified commands). Besides that, there is a fair share of cleanups as well. - Add JEDEC_EWSR (Enable Write Status Register) to default commands. - Mark a no longer used opcode/preopcode table as unused. - Declare all commands as non-atomic/standalone by default. The ICH SPI driver has no business executing commands (preopcodes) automatically if they were not requested. - Automatically adjust preopcode/opcode pairings (like WREN+ERASE) based on what the SPI layer requested. The ICH SPI driver has no business executing altered opcode pairs as it sees fit. - Fix incomplete initialization in the case of a locked down chipset. Leaving the first 4 opcodes with uninitialized pairings had unpredictable results. - switch() exists for a reason. Nested if() checking on the same variable is an interesting style. - Actually check if the requested readcnt/writecnt for a command is supported by the hardware instead of delivering corrupt/incomplete commands and data. - If a command has unsupported readlen/writelen, complain loudly to the user. - Use find_opcode instead of open-coding the same stuff in a dozen variations. - Introduce infrastructure for updating the command set of unlocked chipsets on the fly. Corresponding to flashrom svn r894. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: David Hendricks <dhendrix@google.com>
* Allow one to disable programmer debug messages at compile timeCarl-Daniel Hailfinger2010-01-071-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Programmer debug messages during programmer init/shutdown are useful because they print hardware settings and desired configuration. They help in getting a quick overview of hardware and software state on startup and shutdown. Programmer debug messages during flash chip access are mostly a distraction in logs and should only be enabled if someone is having problems which are suspected to stem from a programmer hardware or programmer software bug. Disable those messages by default, they can be reenabled by #define COMM_DEBUG in the affected programmer file. An added benefit is a tremendous size reduction in verbose probe/read/write/erase logs because only flash chip driver messages remain. In some cases, logs will shrink from 65 MB to 10 kB or less. The right(tm) fix would be two different debug levels (DEBUG and SPEW) and the ability to differentiate between programmer debug messages and flash chip debug messages. Until the design for the message printing infrastructure is finished, this is the best stop-gap measure we can get. Corresponding to flashrom svn r834. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audioahcked@gmail.com>
* Kill hardcoded block erase on ICH SPICarl-Daniel Hailfinger2009-11-251-11/+7
| | | | | | | | | | | | The existing code does not work for all SPI chips, and it just was a band-aid to cope with locked down chipsets back in a time when there was no eraseblock infrastructure. Basically, this unbreaks a few SPI chips on ICH. Corresponding to flashrom svn r777. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Maciej Pijanka <maciej.pijanka@gmail.com>
* ichspi: remove obnoxious debug messageCarl-Daniel Hailfinger2009-10-221-4/+1
| | | | | | | | | | | | | | | | | Since we don't have any debug level printing infrastructure yet, I propose to kill the obnoxious debug message in ichspi.c which was added to check for correct PREOP handling. We know the code works fine (after getting a few reports over 100 MB long) and there's no point in keeping it around anymore. If there is any desire, we can reinstate it as print_spew or whatever once the debug level infrastructure is merged, but at that point we probably just are happy that the debug output isn't there anymore. Corresponding to flashrom svn r753. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Luc Verhaegen <libv@skynet.be>
* The current ICH SPI preop handling is a hack which spews lots of warnings, ↵Carl-Daniel Hailfinger2009-09-181-14/+21
| | | | | | | | | | | | | | | | | | but still yields correct results With the multicommand infrastructure I introduced in r645, it became possible to integrate ICH SPI preopcodes cleanly into the flashrom design. The new code checks for every opcode in a multicommand array if it is a preopcode. If yes, it checks if the next opcode is associated with that preopcode and in that case it simply runs the opcode because the correct preopcode will be run automatically before the opcode. Corresponding to flashrom svn r727. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: FENG Yu Ning <fengyuning1984@gmail.com>
* Standardize on using __func__ instead of __FUNCTION__Uwe Hermann2009-09-021-4/+4
| | | | | | | | | | | | | | | The __func__ variant is standardized in C99 and recommended to be used instead of __FUNCTION__ in the gcc info page. Only _very_ old versions of gcc did not know about __func__, but we've been using both __func__ and __FUNCTION__ for a long while now, and nobody complained about this, so all our users seem to use recent enough compilers. Corresponding to flashrom svn r711. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Remove unnecessary #include filesCarl-Daniel Hailfinger2009-08-091-1/+0
| | | | | | | | | | Serprog compilation is now controlled by a Makefile variable. Replace munmap with physunmap where appropriate. Corresponding to flashrom svn r671. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Replace most of the switch cases in the spi code with lookup on a struct insteadCarl-Daniel Hailfinger2009-07-221-0/+20
| | | | | | | | | | | | | | | This brings the SPI code in line with the generic programmer infrastructure. This patch is a reworked version of a patch by Jakob Bornecrantz. Corresponding to flashrom svn r657. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Jakob Bornecrantz <wallbraker@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Jakob Bornecrantz <wallbraker@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Use a distinct return code for SPI commands with unsupported/invalid lengthCarl-Daniel Hailfinger2009-07-141-3/+10
| | | | | | | | | | | Some drivers support only a few combinations of read/write length and return error otherwise. Having a distinct return code for this error means we can handle it in upper layers. Corresponding to flashrom svn r653. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Add SPI multicommand infrastructureCarl-Daniel Hailfinger2009-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some SPI opcodes need to be sent in direct succession after each other without any chip deselect happening in between. A prominent example is WREN (Write Enable) directly before PP (Page Program). Intel calls the first opcode in such a row "preopcode". Right now, we ignore the direct succession requirement completely and it works pretty well because most onboard SPI masters have a timing or heuristics which make the problem disappear. The FT2232 SPI flasher is different. Since it is an external flasher, timing is very different to what we can expect from onboard flashers and this leads to failure at slow speeds. This patch allows any function to submit multiple SPI commands in a stream to any flasher. Support in the individual flashers isn't implemented yet, so there is one generic function which passes the each command in the stream one-by-one to the command functions of the selected SPI flash driver. Tested-by: Jakob Bornecrantz <wallbraker@gmail.com> Corresponding to flashrom svn r645. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
* Check result of all SPI erase functionsCarl-Daniel Hailfinger2009-06-241-1/+1
| | | | | | | | | | | | | | Since block erase functions do not know the block length (it's not specified in any standard), block erase functions now get an additional parameter blocklen. This enables flashrom to verify the erase result for block erase functions at correct boundaries. Tested by Uwe on SB600. Corresponding to flashrom svn r630. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Use spi_nbyte_program in ichspi.cCarl-Daniel Hailfinger2009-06-171-20/+7
| | | | | | | | | This shortens the code a lot and makes it more readable. Corresponding to flashrom svn r600. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ronald G. Minnich <rminnich@gmail.com>
* Support reads of arbitrary rangeCarl-Daniel Hailfinger2009-06-161-2/+2
| | | | | | | | | | | | That means you can tell flashrom to read exactly bytes 12345-56789 (start 12345, length 44445) and it will not fetch a single byte more. Uwe tested this on one LPC, one SPI, and one parallel flash board. Corresponding to flashrom svn r596. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Every SPI host controller implemented its own way to read flash chipsCarl-Daniel Hailfinger2009-06-131-45/+2
| | | | | | | | | | | | | | | | | | | | | | This was partly due to a design problem in the abstraction layer. There should be exactly two different functions for reading SPI chips: - memory mapped reads - SPI command reads. Each of them should be contained in a separate function, optionally taking parameters where needed. This patch solves the problems mentioned above, shortens the code and makes the code logic a lot more obvious. Since open-coding the min() function leads to errors, include it in this patch as well. Corresponding to flashrom svn r589. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ronald G. Minnich <rminnich@gmail.com>
* Add programmer-specific delay functionsCarl-Daniel Hailfinger2009-06-051-2/+2
| | | | | | | | | | | Add external programmer delay functions so external programmers can handle the delay on their own if needed. Corresponding to flashrom svn r578. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Add bus type annotation to struct flashchipsCarl-Daniel Hailfinger2009-05-311-14/+14
| | | | | | | | | | | | | | | | | | | Right now, the annotation only differentiates between SPI and non-SPI. Anyone who knows more about a specific flash chip should feel free to update it. The existing flashbus variable was abused to denote the SPI controller type. Use an aptly named variable for that purpose. Once this patch is merged, the chipset/programmer init functions can set supported flash chip types and flashrom can automatically select only matching probe/read/erase/write functions. A side benefit of that will be the elimination of the Winbond W29EE011 vs. AMIC A49LF040A conflict. Corresponding to flashrom svn r556. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Use REMS instead of RES in the ICH SPI default opcode tableCarl-Daniel Hailfinger2009-05-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RES is Read Electronic Signature (1 Byte, identical for different chips) REMS is Read Electronic Manufacturer Signature (2 Bytes, mostly unique) RDID is Read JEDEC ID (3 bytes, unique) Of the chips which don't support RDID, a sizable portion supports REMS which gives us both a manufacturer ID and a device ID. This is clearly superior to having only a device ID (the RES case) which has multiple documented collisions. The RES/REMS problem is aggravated by inconsistent naming in vendor data sheets. What's in a name? Considering that we have 1-byte IDs, 2-byte IDs and 3+byte IDs with varying names but mostly consistent opcodes, it makes sense to set our own standard about how the opcodes are called. The best way forward would be to have the ICH SPI driver reprogram the opcode menu on the fly if the opcode menu doesn't contain the requested opcode and the opcode menu is not locked. Until that happens, this patch improves detection accuracy by a factor of 256 for some chips. Corresponding to flashrom svn r549. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested-by: Uwe Hermann with the flash chip "SST SST25VF040.REMS". Acked-by: Ronald G. Minnich <rminnich@gmail.com>
* Use accessor functions for MMIOCarl-Daniel Hailfinger2009-05-171-9/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some MMIO accesses used volatile, others didn't (and risked non-execution of side effects) and even with volatile, some accesses looked dubious. Since the MMIO accessor functions and the onboard flash accessor functions are functionally identical (but have different signatures), make the flash accessors wrappers for the MMIO accessors. For some of the conversions, I used Coccinelle. Semantic patch follows: @@ typedef uint8_t; expression a; volatile uint8_t *b; @@ - b[a] + *(b + a) @@ expression a; volatile uint8_t *b; @@ - *(b) |= (a); + *(b) = *(b) | (a); @@ expression a; volatile uint8_t *b; @@ - *(b) = (a); + mmio_writeb(a, b); @@ volatile uint8_t *b; @@ - *(b) + mmio_readb(b) @@ type T; T b; @@ ( mmio_readb | mmio_writeb ) (..., - (T) - (b) + b ) Corresponding to flashrom svn r524. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Uwe tested read, write, erase with this patch on a random board to make sure nothing breaks. Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Eliminate all 'inline's from the flashrom codeUwe Hermann2009-05-161-6/+6
| | | | | | | | | | | | They serve pretty much no purpose, compilers can optimize pretty much all of what we might mark as inline anyway, _and_ inlines are not enforced in any way by the compiler either. They're totally unneeded. Kill them. Corresponding to flashrom svn r522. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Drop unused/duplicated #includes and some dead codeUwe Hermann2009-05-161-3/+0
| | | | | | | | | Build-tested on 32bit x86. Corresponding to flashrom svn r521. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* There are various reasons why a SPI command can failCarl-Daniel Hailfinger2009-05-131-1/+1
| | | | | | | | | | | | | | | | | | | | | Among others, I have seen the following problems: - The SPI opcode is not supported by the controller. ICH-style controllers exhibit this if SPI config is locked down. - The address in in a prohibited area. This can happen on ICH for any access (BBAR) and for writes in chipset write protected areas. - There is no SPI controller. Introduce separate error codes for unsupported opcode and prohibited address. Add the ability to adjust REMS and RES addresses to the minium supported read address with the help of spi_get_valid_read_addr(). That function needs to call SPI controller specific functions like reading BBAR on ICH. Corresponding to flashrom svn r500. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 02:38:24 +0000