aboutsummaryrefslogtreecommitdiffstats
path: root/flashrom.8.tmpl
Commit message (Collapse)AuthorAgeFilesLines
* dirtyjtag: Add DirtyJTAG programmerJean THOMAS2022-10-151-1/+19
| | | | | | | | | | | | | | | | Add a new programmer driver for the DirtyJTAG project (a USB-JTAG firmware for STM32 MCUs). Successfully tested with DirtyJTAG 1.4 running on an Olimex STM32-H103 development board and a SST25VF020B SPI flash chip. Change-Id: Ic43e9a014ed7d04e429e73b30c9dcfdde1a78913 Signed-off-by: Jean THOMAS <virgule@jeanthomas.me> Reviewed-on: https://review.coreboot.org/c/flashrom/+/67878 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* flashrom.8.tmpl: document mediatek_i2c_spi programmerPeter Marheine2022-10-111-1/+24
| | | | | | | | | | | | | This adds a manpage section describing the mediatek_i2c_spi programmer, including some discussion of devices that are supported as well as which systems use them. Signed-off-by: Peter Marheine <pmarheine@chromium.org> Change-Id: Ia63df470170fbadcabadcdad8e5acc0cde3a274b Reviewed-on: https://review.coreboot.org/c/flashrom/+/67825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
* realtek_mst_i2c_spi: Use underscores for parameters instead hyphensFelix Singer2022-07-221-7/+7
| | | | | | | | | | | | | | | | realtek_mst_i2c_spi is the only programmer which uses hyphens instead of underscores in its parameter names. Thus, for consistency, rename the parameters so that they use underscores. Signed-off-by: Felix Singer <felixsinger@posteo.net> Change-Id: I5ff6d8d432d875670fcaa2088e9cf9d9f1b83dc2 Reviewed-on: https://review.coreboot.org/c/flashrom/+/65935 Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Peter Marheine <pmarheine@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Thomas Heijligen <src@posteo.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* ft2232_spi.c: Add support for kt-link jtag interfaceJacek Naglak2022-07-181-3/+3
| | | | | | | | | | | | | | | | | | | | Change tested writing, reading and erasing spi flashes pinout: jtag - spi 1 vcc - vcc, wp#, hold# 4 gnd - gnd 5 tdi - si 7 tms - cs# 9 tck - sck 13 tdo - so Connect pins 9 and 12 in EXT connector for 3.3V power. Signed-off-by: Jacek Naglak <jnaglak@tlen.pl> Change-Id: Id58c675bc410ec3ef6d58603d13efc9ca53bb87c Reviewed-on: https://review.coreboot.org/c/flashrom/+/64440 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* realtek_mst_i2c_spi.c: Add allow-brick=yes programmer paramEdward O'Callaghan2022-07-171-0/+3
| | | | | | | | | | | | | | | | | | Currently i2c programmers do not have a safe allow listing mechanism via board_enable to facilitate fully qualified chip detection. Since i2c addresses alone can overlap a user may make the mistake of using the wrong programmer. Although unlikely, it is within the realm of possibility that a user could accidently somehow program another chip on their board. Change-Id: Ifb303989fdb67f7267002bd0425f3d050450ec93 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/65545 Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Rename lspcon_i2c_spi to parade_lspconThomas Heijligen2022-07-171-7/+8
| | | | | | | | | | | | | | | | | | | | | The chip targeted by the `lspcon_i2c_spi` programmer is a Parade PS175. Rename the programmer to match the chips vendor / family instead of the generic LSPCON protocol. Remove the `_i2c_spi` ending in preparation to become an opaque master. The chip is visible on an Acer Chromebox CXI4. https://www.paradetech.com/products/ps175/ https://www.acer.com/ac/en/US/content/series/acerchromeboxcxi4 TEST: `make CONFIG_PARADE_LSPCON=yes` and `meson build -Dconfig_parade_lspcon=true` produces flashrom binaries with the parade_lspcon programmer included. Change-Id: I9148be6d9162c1722ff739929ca5e181b628dd57 Signed-off-by: Thomas Heijligen <src@posteo.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/65547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* dummyflasher: Add emulation for S25FL128LNico Huber2022-06-201-1/+3
| | | | | | | | | | Used to test WRSR_EXT2/3 support. Signed-off-by: Nico Huber <nico.h@gmx.de> Change-Id: Ic3cbea87218c973331b9b83e809e7d438407bc13 Reviewed-on: https://review.coreboot.org/c/flashrom/+/64748 Reviewed-by: Thomas Heijligen <src@posteo.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* libflashrom: Return progress state to the library userRichard Hughes2022-05-251-1/+5
| | | | | | | | | | | | | | | | | | | | | | Projects using libflashrom like fwupd expect the user to wait for the operation to complete. To avoid the user thinking the process has "hung" or "got stuck" report back the progress complete of the erase, write and read operations. Add a new --progress flag to the CLI to report progress of operations. Include a test for the dummy spi25 device. TEST=./test_build.sh; ./flashrom -p lspcon_i2c_spi:bus=7 -r /dev/null --progress Change-Id: I7197572bb7f19e3bdb2bde855d70a0f50fd3854c Signed-off-by: Richard Hughes <richard@hughsie.com> Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/49643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Thomas Heijligen <src@posteo.de>
* dummyflasher: enforce write protection for W25Q128FVSergii Dmytruk2022-05-121-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Start taking bits related to write protection into account. Also add "hwwp" parameter for dummy programmer that sets state of WP pin (not inverted value). TEST=use command-line interface to run WP-related commands dummyflasher doesn't store state of the chip between runs and flashrom allows running only one command, so testing WP in this way is limited. However, WP options can be combined with other operations and are executed prior to them, so certain scenarios can be checked. List possible ranges: flashrom -p dummy:emulate=W25Q128FV,hwwp=yes --wp-list Set a particular range and check status is correct: flashrom -p dummy:emulate=W25Q128FV,hwwp=yes \ --wp-enable \ --wp-range=0x00100000,0x00f00000 \ --wp-status Enable write protection and try erasing/writing (erasing here): # this fails flashrom -p dummy:emulate=W25Q128FV,hwwp=yes \ --wp-range=0,0x00c00000 \ --wp-enable \ --erase Write protecting empty range has no effect: # this succeeds flashrom -p dummy:emulate=W25Q128FV,hwwp=yes \ --wp-range=0,0 \ --wp-enable \ --erase Disabling WP is possible if hwwp is off: # this fails flashrom -p dummy:emulate=W25Q128FV,spi_status=0x80,hwwp=yes \ --wp-disable # this succeeds flashrom -p dummy:emulate=W25Q128FV,spi_status=0x80,hwwp=no \ --wp-disable Change-Id: I9fd1417f941186391bd213bd355530143c8f04a0 Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/59074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* dummyflasher: add SR2 and SR3 emulation harnessSergii Dmytruk2022-05-121-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare everything for emulating SR2 and SR3 for chips that have it. This is needed for accessing SRP1 and WPS bits which are involved in write protection. The emulated register doesn't affect anything yet and will be tested by write-protection tests. TEST=check how input value affects status registers of emulated chip flashrom -V -p dummy:emulate=W25Q128FV,spi_status=0x12 | grep 'Initial status register' flashrom -V -p dummy:emulate=W25Q128FV,spi_status=0x1234 | grep 'Initial status register' flashrom -V -p dummy:emulate=W25Q128FV,spi_status=0x123456 | grep 'Initial status register' Mind that at this point there are no chips that emulate more than one status register. Change-Id: I177ae3f068f03380f5b3941d9996a07205672e59 Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/59072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Thomas Heijligen <src@posteo.de>
* flashrom.8.tmpl: Add raiden_debug_spi doc entryEdward O'Callaghan2022-05-051-0/+49
| | | | | | | | | | | | BUG=b:224358254 TEST=`man ./flashrom.8.tmpl`. Change-Id: I186920006bdfcc7a9f89542f84b452dfc72b18e4 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/62768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <martinroth@google.com> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
* Global cleanup: Fix a few spelling errorsMartin Roth2022-05-031-2/+2
| | | | | | | | | | | | | | | | Just a trivial patch to fix a few errors found by codespell. Here's the command I used: codespell -S subprojects,out \ -L fwe,dout,tast,crate,parms,claus,nt,nd,te,truns,trun Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I4e3b277f220fa70dcab21912c30f1d26d9bd8749 Reviewed-on: https://review.coreboot.org/c/flashrom/+/62840 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* jlink_spi: Add option to enable target powerMarc Schink2022-04-301-0/+3
| | | | | | | | Change-Id: I026c22ae1c22541d0024f164c827909ca4a34cf4 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/48380 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* cli_classic: add writeprotect CLI and update man pageNikolai Artemiev2022-04-211-3/+32
| | | | | | | | | | | | | | | | | Tested with: GD25LQ128, GD25Q32, GD25Q256. BUG=b:195381327,b:153800563 BRANCH=none TEST=flashrom -{r,w,E} TEST=flashrom --wp-{enable,disable,range,region,list,status} Change-Id: I499f521781ee8999921996517802c0c0c641d869 Signed-off-by: Nikolai Artemiev <nartemiev@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/58738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
* flashrom.8.tmpl: document lspcon_i2c_spiPeter Marheine2022-03-291-11/+22
| | | | | | | | | | | | | This programmer operates much the same as realtek_mst_i2c_spi, so the I2C options are moved to a new section describing both programmers and a short description is added for this programmer itself. Signed-off-by: Peter Marheine <pmarheine@chromium.org> Change-Id: I9ccb9694fdea29e68f062cc049efc0204917a139 Reviewed-on: https://review.coreboot.org/c/flashrom/+/63104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Nikolai Artemiev <nartemiev@google.com>
* flashrom.8.tmpl: document realtek_mst_i2c_spiPeter Marheine2022-03-291-0/+45
| | | | | | | | | | | This programmer was undocumented. Signed-off-by: Peter Marheine <pmarheine@chromium.org> Change-Id: Idde5a8de014fe84c4a472f8fbfd3562350997d39 Reviewed-on: https://review.coreboot.org/c/flashrom/+/63103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Nikolai Artemiev <nartemiev@google.com>
* flashrom.8.tmpl: Clarify man entries for -w/-v/-xDaniel Campello2022-03-291-5/+11
| | | | | | | | | | | | | | | | This change adds follow up changes to the man page: - Explain (-) argument for -w/-v operations - Expand on region name handling of -x operation Also updates cli_classic.c to match with --help output. BUG=b:224364316 Change-Id: I0cba593da3926c8587027789f4e1e89a2329ca7f Signed-off-by: Daniel Campello <campello@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/62794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* flashrom.8.tmpl: document W25Q128FV is emulated by dummyflasherSergii Dmytruk2021-12-171-0/+2
| | | | | | | | | | | It was absent from the list of emulated chips. Change-Id: I50f6cd6c5d853d6c70921e8027ada52d27982708 Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/59811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
* flashrom.8.tmpl: remove outdated warning about v1.0Sergii Dmytruk2021-12-171-5/+0
| | | | | | | | | | This section is rather outdated and should be dispensed with. Change-Id: Id7e0ce412901ccb27124a9958d5ef214ab289518 Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/59408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* ft2232_spi: reintroduce generic GPIOL controlMichael Niewöhner2021-10-041-1/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reintroduces a reworked version of the GPIOL pin control first introduced in commit 3207844 (CB:49637), which was reverted in commit 6518cf3 (CB:55692) due to breakage. This change introduces a new argument `gpiolX` to allow use of the four GPIOL pins either as generic gpios or as additional CS# signal(s). `X` specifies the GPIOL pin (0-3) to be set to one of [HLC] with the following meaning: * H - set the pin as output high * L - set the pin as output low * C - use the pin as additional CS# signal The third value, `C`, aims to replace the parameter `csgpiol`, that is now marked as deprecated and can be removed at some point in the future. `gpiol` and `csgpiol` are mutually exclusive and use of both results in an error. Multiple pins may be set by specifying the parameter multiple times. Documentation was updated/added accordingly. Test: All pin levels/modes have been verified to behave correctly with a logic analyzer. Change-Id: I3989f0f9596c090de52dca67183b1363dae59d3a Signed-off-by: Alan Green <avg@google.com> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/57810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* flashrom.8: carve out `csgpiol` into its own sectionMichael Niewöhner2021-10-011-6/+11
| | | | | | | | | | | | Documentation for `csgpiol` was put into the generic programmer options section. Move it to its own section. Change-Id: Ic7379331d36b3068eacde5a983b4ccb3afc56c51 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/57893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* flashrom.8: add missing entry for `--flash-contents`Michael Niewöhner2021-09-261-0/+7
| | | | | | | | Change-Id: I64a8200a86329bd26a2069c5dc39430de9f8ba09 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/57807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* flashrom.8: replace `svn changelog` with `git history`Michael Niewöhner2021-09-261-1/+1
| | | | | | | | | Change-Id: If8659dd603cbabdb8e20d89f818072986373e24f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/57811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* Replace freenode referencesAngel Pons2021-07-211-17/+6
| | | | | | | | | | | | The flashrom project no longer uses freenode. To avoid having outdated man pages in the future, the contact methods are now listed in the wiki. Change-Id: I75e8f43c50dc4c3feede0250334a877cdaac8103 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/56031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* flashrom.8: Add Anastasia to authors listEdward O'Callaghan2021-07-081-0/+2
| | | | | | | | | | Change-Id: Ib1ede56e2446833f7dc9acacdb0f26ed822bc7a4 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/56028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
* buspirate: Add psus optionJeremy Kerr2021-06-211-1/+15
| | | | | | | | | | | | This change adds a 'psus=<on|off>' option, to control the external Vcc state of the bus pirate, allowing hardware where the SPI flash chip is powered by the 3V3/5V lines directly. Change-Id: I8a7d4b40c0f7f04f6976f6757f05b61f2c9958f9 Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-on: https://review.coreboot.org/c/flashrom/+/54887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* flashrom.8.tmpl: Add man entry for --extractDaniel Campello2021-05-071-1/+5
| | | | | | | | | | This is a follow up change of CB:52450 Signed-off-by: Daniel Campello <campello@chromium.org> Change-Id: Icc068f5545b6f30ac390b7b815a31e2d61bf4789 Reviewed-on: https://review.coreboot.org/c/flashrom/+/52892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* layout: Add -i <region>[:<file>] supportDaniel Campello2021-04-271-5/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an optional sub-parameter to the -i parameter to allow building the image to be written from multiple files. This will also allow regions to be read from flash and written to separate image files. This is a rebase of a patch that was ported from chromiumos. A lot of things have changed, but the idea is the same. Original patch by Louis Yung-Chieh Lo <yjlou@chromium.org>: Summary: Support -i partition:file feature for both read and write. Commit: 9c7525f Review URL: http://codereview.chromium.org/6611015 Ported version by Stefan Tauner <stefan.tauner@student.tuwien.ac.at> and Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>: Summary: [PATCH 2/6] layout: Add -i <region>[:<file>] support. Review URL: https://mail.coreboot.org/pipermail/flashrom/2013-October/011729.html Change-Id: Ic5465659605d8431d931053967b40290195cfd99 Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Daniel Campello <campello@chromium.org> Co-Authored-by: Edward O'Callaghan <quasisec@google.com> Co-Authored-by: Daniel Campello <campello@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/23021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* dummyflasher.c: Fix null par data and size param handlingNamyoon Woo2020-10-271-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a few bugs that two patches ( `3149822cd45cb2e5841e15d648783748ba1b2ec6` && `3b8fe0f8e907c0ba9f7c7935e950f3e1538d427f`) brought: * Check the presence of 'size' param only if the emulate is VARIABLE_SIZE. * Initialize 'flash->st->par.data' in dummy_init() so that it can probe the VARIABLE_SIZE emulator correct in probe_variable_size(). * Replace atoi() with strtol(). * Revise man page to describe how to use the VARIABLE_SIZE emulation target. TEST: $ flashrom -p dummy:image=dummy.bin,emulate=VARIABLE_SIZE,size=16777216 \ -w ${IMG} -V -f ... Verifying flash... VERIFIED. Writing dummy.bin $ flashrom -p dummy:image=dummy.bin,emulate=VARIABLE_SIZE -w ${IMG} -V -f ... dummy_init: the size parameter is not given. Unhandled programmer parameters (possibly due to another failure): image=dummy.bin, Error: Programmer initialization failed $ flashrom -p dummy:image=dummy.bin,emulate=SST25VF040.REMS -c SST25LF040A -w ${IMG} ... Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED. $ man flashrom ... * Dummy vendor VARIABLE_SIZE SPI flash chip (configurable size, page write) Example: flashrom -p dummy:emulate=SST25VF040.REMS To use VARIABLE_SIZE chip, size must be specified to configure the size of the flash chip as a power of two. Example: flashrom -p dummy:emulate=VARIABLE_SIZE,size=16777216,image=dummy.bin ... Signed-off-by: Namyoon Woo <namyoon@google.com> Change-Id: Ie6481943a831b946a91b643b4d79e684c27e48b8 Reviewed-on: https://review.coreboot.org/c/flashrom/+/46536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* Install the man file when using meson as a buildsystemRichard Hughes2020-07-151-1/+1
| | | | | | | | | | | | This fixes a regression with the Fedora package. Change-Id: I881bd5002a842072ce9dadea033c51a2668f9e7c Signed-off-by: Richard Hughes <richard@hughsie.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/38939 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* sb600spi: Add spireadmodeRob Barnes2020-03-031-1/+19
| | | | | | | | | | | | | | | | | | Added spireadmode for >= Bolton. Do not override speed or read mode for >= Bolton if parameter not specified. Minor cleanup of sb600spi.c code. TEST=Manual: deploy on tremblye read flash using various parameters BUG=b:147665085,b:147666328 BRANCH=master Change-Id: Id7fec7eb87ff811148217dc56a86dca3fef122ff Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/38833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* Add support for STLINK V3 debugger/programmer via its SPI bridgeMiklós Márton2019-12-311-0/+27
| | | | | | | | Change-Id: Icffab87ac8f2c570187ed753ec70f054541873a4 Signed-off-by: Miklós Márton <martonmiklosqdev@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/34661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* ft2232_spi: Add support for Tin Can Tools Flyswatter/Flyswatter 2Russ Dill2019-12-011-1/+2
| | | | | | | | | | | | | | | | The Tin Can Tools Flyswatter and Flyswatter 2 have a FT2232H with a JTAG interface wired to port A. The buffers that drive the JTAG pins need to be enabled with an nOE signal from the FT2232H ADBUS6 and ADBUS7 pins. Flyswatter has an ARM-14 JTAG interface and Flyswatter 2 has an ARM-20 JTAG interface. Change-Id: I56b1fb76dcda32bb02980cd54a2853506bfc9dfd Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/36896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* Add support for National Instruments USB-845x devicesMiklós Márton2019-11-141-0/+64
| | | | | | | | Change-Id: I9477b6f0193bfdf20bbe63421a7fb97b597ec549 Signed-off-by: Miklós Márton <martonmiklosqdev@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/25683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* cli_classic: Add convenient '--{flash,get}-size' cli optEdward O'Callaghan2019-10-041-1/+4
| | | | | | | | | | | | | | | | | | | We have this in the ChromiumOS fork of flashrom which we rely on to obtain the current flash chip in use. This ports it for upstream consumption. V.2: Constrain number_of_operations to one as per Nico's comment. V.3: Rename '--get-size' to '--flash-size' however keep old arg as 'undocumented' for back-compat. V.4: Add missing --help line. V.5: Add man page entry. V.6: Use printf() directly. Change-Id: I8f002f3b2012aec4d26b0e81456697b9a5de28d6 Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/35592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* cli_classic: Add convenient '--flash-name' cli optEdward O'Callaghan2019-10-041-4/+11
| | | | | | | | | | | | | | | | | | We have this in the ChromiumOS fork of flashrom which we rely on to obtain the current flash chip in use. This ports it for upstream consumption. V.2: Constrain number_of_operations to one as per Nico's comment. V.3: Move two goto's outside inner if-else block. V.4: Add missing --help line. V.5: Add man page entry. v.6: Use printf() directly. Change-Id: I23d574a2f8eaf809a5c0524490db9e3a560ede56 Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/35591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Rework internal bus handling and laptop bail-outNico Huber2019-06-061-15/+16
| | | | | | | | | | | | | | | | | | | | | | We used to bail out on any unknown laptop. However, modern systems with SPI flashes don't suffer from the original problem. Even if a flash chip is shared with the EC, the latter has to expect the host to send regular JEDEC SPI commands any time. So instead of bailing out, we limit the set of buses to probe. If we suspect to be running on a laptop, we only allow probing of SPI and opaque programmers. The user can still use the existing force options to probe all buses. This will obsolete some board-enables that could be moved to `print.c` in follow-up commits. Change-Id: I1dbda8cf0c10d7786106f14f0d18c3dcce35f0a3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/28716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Thomas Heijligen <src@posteo.de>
* Add initial J-Link SPI programmerMarc Schink2019-01-051-0/+56
| | | | | | | | | | Tested with SEGGER J-Link EDU, Flasher ARM and flash chip W25Q16.V. Change-Id: Ie03a054a75457ec9e1cab36ea124bb53b10e8d7e Signed-off-by: Marc Schink <flashrom-dev@marcschink.de> Reviewed-on: https://review.coreboot.org/c/28087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Add support to get layout from fmap (e.g. coreboot rom)Arthur Heymans2018-10-231-6/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Flashmap, or simply fmap, is a binary data format for describing region offsets, sizes, and certain attributes and is widely used by coreboot. This patch adds support for the fmap data format version 1.1 and adds --fmap and --fmap-file arguments. Using --fmap will make flashrom to search the ROM content for fmap data. Using --fmap-file will make flashrom search a supplied file for fmap data. An example of how to update the COREBOOT region of a ROM: flashrom -p programmer --fmap -w coreboot.rom -i COREBOOT flashrom -p programmer --fmap-file coreboot.rom -w coreboot.rom -i COREBOOT The fmap functions are mostly copied from cbfstool. Currently it is made mutually exclusive with other layout options until we are more clever about this input. Change-Id: I0e7fad38ed79a84d41358e1f175c36d255786c12 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/23203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
* ft2232_spi: add an ability to use GPIO for chip selectionSergey Alirzaev2018-10-081-6/+9
| | | | | | | | Change-Id: I6db05619e0d69ad18549c8556ef69225337b1532 Signed-off-by: Sergey Alirzaev <zl29ah@gmail.com> Reviewed-on: https://review.coreboot.org/28911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* digilent_spi: add a driver for the iCEblink40 development boardLubomir Rintel2018-06-261-2/+21
| | | | | | | | | | | | | | | This is driver that supports the Lattice iCE40 evaluation kits. On the board is a SPI flash memory chip labeled ST 25P10VP. Tested to work read/write/erase with "-p digilent_spi -c M25P10" or with a patch that resets the part beforehands (in which case it gets detected as a M25P10-A and is way faster due to paged writes). Change-Id: I7ffcd9a2db4395816f0e8b6ce6c3b0d8e930c9e6 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/23338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Enable writes with active MENico Huber2018-05-291-8/+1
| | | | | | | | | | | | | Replace the `ich_spi_force` logic with more helpful warnings. These can be hidden later, in case the necessary switches are detected. Also, demote some warnings about settings that are the default nowadays (e.g. SPI configuration lock, inaccessible ME region). Change-Id: I94a5e7074b845c227e43d76d04dd1a71082a1cef Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* linux_mtd: Import driver from ChromiumOSDavid Hendricks2018-05-171-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This imports a series of patches from chromiumos for MTD support. The patches are squashed to ease review and original Change-Ids have been removed to avoid confusing Gerrit. There are a few changes to integrate the code: - Conflict resolution - Makefile changes - Remove file library usage from linux_mtd. We may revisit this and use it for other Linux interfaces later on. - Switch to using file stream functions for reads and writes. This consolidated patch is Signed-off-by: David Hendricks <dhendricks@fb.com> The first commit's message is: Initial MTD support This adds MTD support to flashrom so that we can read, erase, and write content on a NOR flash chip via MTD. BUG=chrome-os-partner:40208 BRANCH=none TEST=read, write, and erase works on Oak Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/272983 Reviewed-by: Shawn N <shawnn@chromium.org> This is the 2nd commit message: linux_mtd: Fix compilation errors This fixes compilation errors from the initial import patch. Signed-off-by: David Hendricks <dhendricks@fb.com> This is the 3rd commit message: linux_mtd: Suppress message if NOR device not found This just suppresses a message that might cause confusion for unsuspecting users. BUG=none BRANCH=none TEST=ran on veyron_mickey, "NOR type device not found" message no longer appears under normal circumstances. Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/302145 Commit-Ready: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Shawn N <shawnn@chromium.org> This is the 4th commit message: linux_mtd: Support for NO_ERASE type devices Some mtd devices have the MTD_NO_ERASE flag set. This means these devices don't require an erase to write and might not have implemented an erase function. We should be conservative and skip erasing altogether, falling back to performing writes over the whole flash. BUG=b:35104688 TESTED=Zaius flash is now written correctly for the 0xff regions. Signed-off-by: William A. Kennington III <wak@google.com> Reviewed-on: https://chromium-review.googlesource.com/472128 Commit-Ready: William Kennington <wak@google.com> Tested-by: William Kennington <wak@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> This is the 5th commit message: linux_mtd: do reads in eraseblock-sized chunks It's probably not the best idea to try to do an 8MB read in one syscall. Theoretically, this should work; but MTD just relies on the SPI driver to deliver the whole read in one transfer, and many SPI drivers haven't been tested well with large transfer sizes. I'd consider this a workaround, but it's still good to have IMO. BUG=chrome-os-partner:53215 TEST=boot kevin; `flashrom --read ...` TEST=check for performance regression on oak BRANCH=none Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/344006 Reviewed-by: David Hendricks <dhendrix@chromium.org> This is the 6th commit message: linux_mtd: make read/write loop chunks consistent, and documented Theoretically, there should be no maximum size for the read() and write() syscalls on an MTD (well, except for the size of the entire device). But practical concerns (i.e., bugs) have meant we don't quite do this. For reads: Bug https://b/35573113 shows that some SPI-based MTD drivers don't yet handle very large transactions. So we artificially limit this to block-sized chunks. For writes: It's not clear there is a hard limit. Some drivers will already split large writes into smaller chunks automatically. Others don't do any splitting. At any rate, using *small* chunks can actually be a problem for some devices (b:35104688), as they get worse performance (doing an internal read/modify/write). This could be fixed in other ways by advertizing their true "write chunk size" to user space somehow, but this isn't so easy. As a simpler fix, we can just increase the loop increment to match the read loop. Per David, the original implementation (looping over page chunks) was just being paranoid. So this patch: * clarifies comments in linux_mtd_read(), to note that the chunking is somewhat of a hack that ideally can be fixed (with bug reference) * simplifies the linux_mtd_write() looping to match the structure in linux_mtd_read(), including dropping several unnecessary seeks, and correcting the error messages (they referred to "reads" and had the wrong parameters) * change linux_mtd_write() to align its chunks to eraseblocks, not page sizes Note that the "->page_size" parameter is still somewhat ill-defined, and only set by the upper layers for "opaque" flash. And it's not actually used in this driver now. If we could figure out what we really want to use it for, then we could try to set it appropriately. BRANCH=none BUG=b:35104688 TEST=various flashrom tests on Kevin TEST=Reading and writing to flash works on our zaius machines over mtd Change-Id: I3d6bb282863a5cf69909e28a1fc752b35f1b9599 Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/505409 Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Martin Roth <martinroth@chromium.org> Reviewed-by: William Kennington <wak@google.com> Reviewed-on: https://review.coreboot.org/25706 Tested-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
* buspirate_spi: Add support for variable serial speedsShawn Anastasio2018-01-261-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | This patch sets the default baud rate for communication between the host device and the Bus Pirate for hardware versions 3.0 and greater to 2M baud. It also introduces the ability to manually set the baud rate via the added 'serialspeed' programmer parameter. This is done in two parts. Firstly, the requested serial speed is looked up in a table to determine the appropriate clock divisor and the divisor is sent to the bus pirate. Then, the system's baud rate for the selected serial port is set using serial.c's 'serialport_config'. This function's prototype had to be added to programmer.h. In testing, using the 2M baud rate was able to significantly decrease flash times (down from 20+ minutes to less than 2 minutes for an 8MB flash). Change-Id: I3706f17a94fdf056063f2ad4a5f0a219665cdcbf Signed-off-by: Shawn Anastasio <shawnanastasio@yahoo.com> Reviewed-on: https://review.coreboot.org/23057 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Add option to read ROM layout from IFDNico Huber2017-06-141-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | Add an option --ifd to read the ROM layout from an Intel Firmware Descriptor (IFD). Works the same as the -l option, if given, -i specifies the images to update. v2: o Rebased on libflashrom, use libflashrom interface. o Use functions from ich_descriptors.c. v3: o Move ich_descriptors.o to LIB_OBJS, thus build it independent of arch and programmers. o Bail out if we aren't compiled for little endian. o Update flashrom.8.tmpl. v4: o Incorporated David's comments. o Removed single-character `-d` option. v5: Changed region names to match the output of `ifdtool --layout ...` Change-Id: Ifafff2bf6d5c5e62283416b3269723f81fdc0fa3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
* cli_classic: Add option (-N, --noverify-all)Nico Huber2017-06-091-1/+17
| | | | | | | | | | | | | | This option specifies to verify included regions only after a write. It also reduces the data read before the write. v2: o Changed short option name to `-N`. o Added section in the manual page. Change-Id: I40b5983f56d62821d17b827b88b73d1d41a30bd7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
* Add a bunch of new/tested stuff and various small changes 25Stefan Tauner2016-03-131-17/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASRock Fatal1ty 970 Performance and P4i65G Reported by anonymous email message ID: 932677687262b1300eaf14260999d9262c31@guerrillamail.com The latter actually had a tested board enable already. Flash chips: - Eon EN25Q128 to PREW (+PREW) Reported by Adrian Graham - GigaDevice GD25VQ41B to PREW (+PREW) Reported by David Hendricks - Winbond W39V040FB to PREW (+EW) Reported by fjed on IRC Miscellaneous: - Change PCI IDs of "MS-6577 (Xenon)" board enable. The previous IDs contained the on-board display adapter which is disabled when a dedicated graphics card is installed. - Add a note to the README how to overcome the clang warning if only a single programmer is enabled. - Fix some typo and manpage problems found by lintian - r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG). This patch corrects that. - Make MS-7094 (K8T Neo2-F V2.0) board enable less contestable. Previous PCI IDs were board-specific but ot the other of devices that could be disabled by the firmware or that vary among hardware revions. There are no good alternatives available. However, since we always have a DMI decoder available now, we can use non-board-specific devices without taking risks. Thanks to Uwe Hermann for reporting and testing. - Some other small changes to clean up whitespace and fix some warnings from Debian's lintian. Corresponding to flashrom svn r1951. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* rayer_spi: add support for SPI Tiny Tools-compatible hardwareStefan Tauner2016-02-281-1/+2
| | | | | | | | | | | Apparently, there is at least one board of Russian origin (coined SPI_TT LPT) that works with SPI Tiny Tools which is a closed-source Windows GUI program somewhat similar to flashrom. Corresponding to flashrom svn r1945. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* dediprog: port to libusb1 and use asynchronous bulk transfers for readingNico Huber2016-02-181-3/+3
| | | | | | | | | | | | | This patch is based on Nico Huber's original version that was rebased by David Hendricks for Chromium OS in Change-Id: I84384b9d8ed53911657cf2293733531a6e11fd23 Corresponding to flashrom svn r1929. Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* ft2232_spi: Add support for Google Servo boards (v1 + v2)Todd Broch2016-02-141-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch has been cherry-picked from various patches in the chromiumos tree denoted below. Change-Id: I4b679e23ab37a4357b1e3d23f6f65a1c31f7d71a Change-Id: Ibda56201ab4519315431c08206c61ceffb7c7e65 Change-Id: I540ad2d304dc69a7c79ca154beb744ef947ff808 Servo V2 has two FT4232H parts. The first one (denoted 'legacy') is dedicated to supporting orginal Servo V1 functionality. The second, residing at USB ID 0x18d1:5003 provides two other SPI interfaces on port A and B respectively. Additional changes by Alexandru Gagniuc, Hatim Kanchwala and Urja Rannikko: - The clock divisor is set to '6', as this creates a 10MHz SPI clock, which is the same SPI clock that the chromiumos branch produced. - Add udev rule for Google servo boards to util/flashrom.rules. - Add Google servo entry to manpage. Corresponding to flashrom svn r1925. Signed-off-by: Todd Broch <tbroch@chromium.org> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Hatim Kanchwala <hatim@hatimak.me> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Hatim Kanchwala <hatim@hatimak.me> Acked-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 22:23:42 +0000