| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Add explicit installation instructions in the README.
- Code cleanups, coding style fixes, drop dead code.
- Drop duplicate board listings from -L output (some boards were explicitly
recorded in boards_ok[] _and_ implicitly via the board-enables table.
- Add MS-xxxx numbers to MSI boards where we can find that info.
- Fix typo, "K8T Neo2" should have been "K8T Neo2-F" actually, at least
according to the comment of w83627thf_gpio4_4_raise_2e() which says
"Suited for: MSI K8T Neo2-F".
Corresponding to flashrom svn r554.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Marked as OK:
- ASUS M2V (reported by Henri Valta <henri.valta@kemi.fi>)
http://www.coreboot.org/pipermail/coreboot/2009-May/048674.html
- Jetway J7F4K1G5D-PB (reported by Kevin O'Connor <kevin@koconnor.net>)
- PC Engines Alix.3d3 (reported by Tobias Müller <Tobias_Mueller@twam.info>)
http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html
- MSI K7N2 (reported by Maciej Pijanka <maciej.pijanka@gmail.com>)
http://www.coreboot.org/pipermail/coreboot/2009-May/048777.html
Marked as (so far) non-working:
- DFI 855GME-MGF (reported by Tobias Müller <Tobias_Mueller@twam.info>)
http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html
- ASUS M3N78 Pro (reported by Piotr Esden-Tempski <esden@esden.net>)
As discussed on IRC this is an MCP78 chipset with SPI translation apparently
done in the southbridge, and we have no NVIDIA datasheets, of course. So the
situation for this board will probably not change anytime soon.
- MSI MS-6178 (reported by Uwe Hermann <uwe@hermann-uwe.de>)
I tested write/erase will not work on this board, so a write-enable is
needed. In _addition_, the board immediately powers off if you hot-unplug
the PLCC chip, so I guess there's some SMI interference.
- GIGABYTE GA-K8N-SLI (reported by Alexander Gordeev <lasaine@lvk.cs.msu.su>)
This is currently being discussed on the mailing list (see
http://www.coreboot.org/pipermail/coreboot/2009-May/048717.html) and it's
very likely that we'll be able to add a board-enable, so this board can be
maked as OK soonish.
Corresponding to flashrom svn r553.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While the other chipset enables for nvidia could potentially also work,
this one, by not touching other bits, seems like the safest solution.
Uwe tested this on his Asus A7N8X Deluxe, so hopefully the A7N8X-E
(reporter unknown) is now no longer an issue.
Corresponding to flashrom svn r548.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We had duplicated code under different names and even open-coded some
functions in some places.
wbsio_read/regval -> sio_read wbsio_write/regwrite -> sio_write
wbsio_mask -> sio_mask
board_biostar_p4m80_m4 now uses existing IT87 functions.
Corresponding to flashrom svn r547.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>
|
|
|
|
|
|
|
|
|
| |
Obvious typo due to inb/outb versus wbsio_ argument ordering confusion.
Corresponding to flashrom svn r546.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
| |
Thanks Christian Ruppert <spooky85@gmail.com> for testing on hardware.
(also: Fix a typo and some whitespace while I'm at it)
Corresponding to flashrom svn r545.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Update manpage, we now report supported boards via -L.
- Add some missing escaping for '-' characters in the manpage.
Corresponding to flashrom svn r543.
- Shorten some of the really long device names, so that -L output looks
nicer.
- Display a "table header" for all entries/columns in -L output.
- Make -L output tabular for all lists for better readability.
- Do not print "unknown XXXX SPI chip" entries in -L output.
- And random other cosmetics...
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- ASUS P5B-Deluxe (reported by Andrew Paprocki)
- ASUS P6T Deluxe V2 (reported by Aldrik Dunbar)
- GIGABYTE GA-6ZMA (reported by Urja Rannikko)
- Intel EP80759 (reported by Stephan GUILLOUX)
- MSI MS-7345 (P35 Neo2-FIR) (reported by Onno)
- MSI MS-7168 (Orion) (reported by ubuntosaure)
- Supermicro H8QC8 (reported by Victor Zele)
Mark the following boards as 'known-bad' (they likely require a write-enable):
- Abit IS-10 (reported by deejkuba)
- ASUS P5B (reported by Henning Fleddermann)
- ASUS P5BV-M (reported by Bernhard M. Wiedemann)
- Boser HS-6637 (reported by Mark Robinson)
Also, mark the Winbond W39V040A as fully tested (report by ubuntosaure).
Corresponding to flashrom svn r542.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Thanks Michael Heimann for reporting.
The board was misidentified as a GIGABYTE GA-MA78G-DS3H though, as the
old PCI IDs and subsystem IDs of match. Thus, use differing ones for
both boards, which is not so easy. The only usable-looking difference
is in the SATA controller subsystem IDs. This should allow us to
properly detect both boards.
Corresponding to flashrom svn r534.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r533.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
| |
required
Thanks Myles Watson <mylesgw@gmail.com> for the report.
Corresponding to flashrom svn r532.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Supported out of the box (no flash enables required)
- Verifiably not yet working (unknown flash enable)
Also, move some structs to flash.h in preparation for later wiki
output support.
Corresponding to flashrom svn r523.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
| |
Build-tested on 32bit x86.
Corresponding to flashrom svn r521.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r490.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
| |
This will allow generation of supported boards for wiki output to be
split to distinct columns.
Corresponding to flashrom svn r482.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
| |
This is (among other things) useful/required for the -L output and the
upcoming wiki-syntax output of supported boards.
Corresponding to flashrom svn r474.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
| |
This board uses IT8718F LPC->SPI translation for the flash chip.
Tested by Mateusz Murawski.
Corresponding to flashrom svn r438 and coreboot v2 svn r4161.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Mateusz Murawski <matowy@tlen.pl>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch restores the pciid based board matching table. It makes this
table readable and hackable again, and the only disadvantage is that the
right margin is way beyond the rather dogmatic 80. All 0x0000 pci ids have
been string replaced by 0 to more easily spot missing ids, and extra
comments have been added to explain how the various entries are used.
Corresponding to flashrom svn r434 and coreboot v2 svn r4142.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
|
|
| |
It has SPI flash behind ITE8716 on LPC.
Corresponding to flashrom svn r430 and coreboot v2 svn r4132.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: illdred <illdred@gmail.com>
|
|
|
|
|
|
|
|
|
| |
Tested on an iWILL DK8-HTX board.
Corresponding to flashrom svn r424 and coreboot v2 svn r4086.
Signed-off-by: Mondrian nuessle <nuessle@uni-hd.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
| |
This is a BCM5785 based machine, WP# and TLB# need to be deasserted using
GPIO 2 and 5 from the PM registers of the southbridge.
This is very similar to the x3455 implementation.
Corresponding to flashrom svn r423 and coreboot v2 svn r4031.
Signed-off-by: Mondrian Nuessle <nuessle@uni-hd.de>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r414 and coreboot v2 svn r3927.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: David Tiemann <davidtiemann@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r405 and coreboot v2 svn r3911.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r403 and coreboot v2 svn r3909.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Similarly to flashchips array, this patch intends to make the table board_pciid_enables more readable.
Corresponding to flashrom svn r382 and coreboot v2 svn r3861.
Signed-off-by: Stephan Guilloux <stephan.guilloux@free.fr>
> What real problem does this solve?
1. Next time someone adds a new struct member, we avoid mistakes of
ordering of initializers
2. we avoid mistakes in the first place.
The .x = y stuff was added for a (good) reason, I think this is an
improvement.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
| |
This board has 2x MX25L8005 flash chips behind an IT8718F LPC->SPI bridge.
The board uses GIGABYTE's patented BIOS failover technology, and at this point
we do not know how to control which of the two chips flashrom actually hits.
Corresponding to flashrom svn r380 and coreboot v2 svn r3859.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Yul Rottmann <yulrottmann@bitel.net>
|
|
|
|
|
|
|
|
|
|
|
|
| |
There seem to be at least two versions of the board out there, and the
subsystem IDs changed between the versions.
Patch successfully tested on hardware.
Corresponding to flashrom svn r369 and coreboot v2 svn r3833.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r326 and coreboot v2 svn r3669.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
| |
The KT4V is autodetected and supports the KT3 Ultra 2 with "-m msi:kt4v"
(but is not autodetected, yet).
Corresponding to flashrom svn r309 and coreboot v2 svn r3528.
Signed-off-by: Sean Nelson <snelson@nmt.edu>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
W39V040C does standard JEDEC commands except chip erase so add a small driver.
probe_w39v040c() prints the block lock pin status when a chip is found.
The Neo2 board enable matches on 8237-internal IDE and onboard NIC PCI IDs.
Many thanks to Daniel McLellan for testing all of this on hardware!
Build tested by Uwe.
Corresponding to flashrom svn r304 and coreboot v2 svn r3431.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
| |
Uses the 0.0 Host bridge CN700/VN800/P4M800CE/Pro and 11.0 ISA bridge devices
with their 1106:aa08 subsystem id:s for autodetection.
Corresponding to flashrom svn r297 and coreboot v2 svn r3413.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
|
|
| |
Thanks to Stefan for pointing this one out.
Corresponding to flashrom svn r287 and coreboot v2 svn r3403.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
|
|
|
| |
Needed at least for GIGABYTE:m57sli in coreboot to match gigabyte:m57sli in
flashrom.
Corresponding to flashrom svn r286 and coreboot v2 svn r3402.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
|
|
|
|
|
|
|
|
|
|
| |
Uses the VT8237 ISA bridge with mainboard subsystem ID and Realtek 8139 with
mainboard subsystem ID for board detection.
Corresponding to flashrom svn r258 and coreboot v2 svn r3366.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Lyos Gemini Norezel <lyos.gemininorezel@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Thanks to Reinder for clean room reverse engineering and data sheet diving!
This board is autodetected because there are some good BioStar subsystem IDs.
Matching uses onboard VT6420 SATA RAID with subsystem BioStar 3206 and
onboard UniChrome Pro IGP graphics with subsystem BioStar 1202.
Corresponding to flashrom svn r256 and coreboot v2 svn r3364.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Lyos Gemini Norezel <lyos.gemininorezel@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
| |
- Fix typos and inconsistencies.
- Drop duplicate line which tells us the chip name twice.
- Also print the chip vendor, not only the name.
Corresponding to flashrom svn r249 and coreboot v2 svn r3348.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested on actual hardware.
This patch add an ich_gpio_raise() function which can be re-used by other
board-specific funtions which need to raise GPIOs on ICHx southbridges.
This also fixes bug #7, see http://tracker.coreboot.org/trac/coreboot/ticket/7,
as it turned out the ICH2 (and other ICHx) code works fine.
Corresponding to flashrom svn r247 and coreboot v2 svn r3346.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch addresses different argument order of outX() calls,
FreeBSD-specific headers, difference in certain type names and system
interface names, and also FreeBSD-specific way of gaining IO port
access.
Corresponding to flashrom svn r245 and coreboot v2 svn r3344.
Signed-off-by: Andriy Gapon <avg@icyb.net.ua>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
| |
Support for flashing on the Kontron 986LCD-M board.
Corresponding to flashrom svn r213 and coreboot v2 svn r3165.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r202 and coreboot v2 svn r3138.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
| |
and mainboards
Corresponding to flashrom svn r199 and coreboot v2 svn r3133.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ward Vandewege <ward@gnu.org>
|
|
|
|
|
|
|
|
|
|
|
| |
Also add a comment about NULL subsystem IDs leaving the board entry out
of auto-detection logic.
Corresponding to flashrom svn r197 and coreboot v2 svn r3110.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r194 and coreboot v2 svn r3099.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
|
|
|
|
|
| |
one board name that matches
The full syntax still works, and is required when two vendors have
boards with the same names.
Corresponding to flashrom svn r190 and coreboot v2 svn r3082.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r178 and coreboot v2 svn r3054.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r174 and coreboot v2 svn r3033.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
| |
Also, s/0xFF80/0xFFC0/ in the Acorp 6A815EPD board-enable, as per
http://www.linuxbios.org/pipermail/linuxbios/2007-December/027750.html
Corresponding to flashrom svn r162 and coreboot v2 svn r2997.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r161 and coreboot v2 svn r2995.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r151 and coreboot v2 svn r2873.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r148 and coreboot v2 svn r2864.
Signed-off-by: Michael van der Kolff <mvanderkolff@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|