aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* makefile: allow to disable all default-yes config variables with ↵Stefan Tauner2016-02-261-0/+10
| | | | | | | | | | | CONFIG_NOTHING=yes All credit for this should be given to Patrick Georgi (see r1869). Corresponding to flashrom svn r1944. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Partial architecture support for alpha hppa m68k sh s390Carl-Daniel Hailfinger2016-02-252-1/+117
| | | | | | | | | Only hardware not needing raw access (PCI, memory, port I/O) is supported. Corresponding to flashrom svn r1943. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* dediprog: use ordinary USB devs arrayStefan Tauner2016-02-223-4/+12
| | | | | | | | | | Even though there is currently only one USB device ID in the wild using our standard way to define the devices creates nicer output for -L and -z. Corresponding to flashrom svn r1942. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* pickit2_spi: use ordinary USB devs arrayStefan Tauner2016-02-223-7/+12
| | | | | | | | | | Even though there is currently only one USB device ID in the wild using our standard way to define the devices creates nicer output for -L and -z. Corresponding to flashrom svn r1941. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Increase version number to 0.9.9-rc1Stefan Tauner2016-02-211-1/+1
| | | | | | | | | Corresponding to flashrom svn r1939. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Automatically disable atapromise for libpayload as wellStefan Tauner2016-02-211-0/+6
| | | | | | | | | | | The atapromise module uses the rom_size field of the struct pci_dev found in pci.h that does not exist in libpayload's implementation and thus does not compile with libpayload. Corresponding to flashrom svn r1938. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for GigaDevice GD25VQ41B and GD25Q128CHatim Kanchwala2016-02-212-1/+83
| | | | | | | Corresponding to flashrom svn r1937. Signed-off-by: Hatim Kanchwala <hatim@hatimak.me> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Allow global disable of all drivers requiring libusb* or libpciCarl-Daniel Hailfinger2016-02-201-6/+39
| | | | | | | | | | | | | | This is especially helpful for compile tests with CONFIG_EVERYTHING=yes, but can also be used without CONFIG_EVERYTHING. Usage: make CONFIG_ENABLE_LIBUSB0_PROGRAMMERS=no CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no Corresponding to flashrom svn r1936. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Automatically disable atapromise on non-x86Carl-Daniel Hailfinger2016-02-201-0/+5
| | | | | | | | | | We do not support PCI port I/O on non-x86 (yet). Atapromise needs PCI port I/O. Corresponding to flashrom svn r1935. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Do not require PCI code for RayeR SPI driverCarl-Daniel Hailfinger2016-02-202-8/+30
| | | | | | | | | | | | CONFIG_RAYER_SPI only needs raw hardware access, but not libpci. Disable CONFIG_RAYER_SPI on Android because of missing inb/outb. Introduce NEED_RAW_ACCESS for raw memory access, PCI port I/O and MSR access. Corresponding to flashrom svn r1934. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* dediprog: tremendously improve performance on SF600 by ignoring the specStefan Tauner2016-02-201-0/+10
| | | | | | | | | | | | The solution was discovered in a collaborative bug hunt with testing done by David Hendricks. The actual culprit was found by Urja Rannikko by comparing vanilla flashrom with David's version in chromiumos. Corresponding to flashrom svn r1933. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: David Hendricks <dhendrix@chromium.org> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Include sys/glibc-syscalls.h instead of inexistent sys/io.h on AndroidStefan Tauner2016-02-201-2/+8
| | | | | | | | | | This won't make raw I/O work magically but at least it would provide iopl() if some driver requires it and there is no better alternative currently. Corresponding to flashrom svn r1932. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Makefile: fix overriding of make command line argumentsStefan Tauner2016-02-191-18/+18
| | | | | | | | | | | | | | | | | | Command line arguments given when executing make should not stop us from setting commonly user-configurable variables like CPPFLAGS or LDFLAGS. Without this patch 'make CPPFLAGS="-Ifail"' would fail to find libusb1 headers and abort. Add override statements where we append mandatory options to these variables to make (Debian) packagers more happy. Also, r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG). This patch corrects that as well. Corresponding to flashrom svn r1931. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix chip size limiting in atapromiseCarl-Daniel Hailfinger2016-02-181-24/+21
| | | | | | | | | | | | | | | | The current code is checking model_id to remember if a chip has already been limited, but if flashchips.c contains two subsequent chips with different vendor_id but identical model_id the adjustment will not be done. Switch to checking the chip size instead. If a chip has multiple whole-chip erase functions, only one will be modified. Fix that. Corresponding to flashrom svn r1930. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> Acked-by: Urja Rannikko <urjaman@gmail.com>
* dediprog: port to libusb1 and use asynchronous bulk transfers for readingNico Huber2016-02-184-94/+203
| | | | | | | | | | | | | This patch is based on Nico Huber's original version that was rebased by David Hendricks for Chromium OS in Change-Id: I84384b9d8ed53911657cf2293733531a6e11fd23 Corresponding to flashrom svn r1929. Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* dediprog: use command 0x0B (set voltage) only on older SF100sDavid Hendricks2016-02-181-13/+24
| | | | | | | | | | | | | | | | | | | | | | | As per e-mail with Dediprog, command 0x0B (which is not listed in the command spec) is need on older Dediprogs only. SF100 with firmware V6.0.0 and newer as well as all SF600 programmers do not support it. The original wording by Dediprog was: "0x0B is used to adjust voltage level, but it's available for some version of SF100 only. SF100 of firmware V6.x.x and all version of SF600/SF600Plus not support this command. If you have old version of SF100, 0x0B is still needed." This patch renames dediprog_device_init() to something more appropriate and adds comments for clarity, and only runs it conditionally if we cannot query the devicestring initially. Based on ChromiumOS' Change-Id: I42de7d28401d7ad5be8fcf8a8c165e2614a45960 Corresponding to flashrom svn r1928. Signed-off-by: David Hendricks <dhendrix@chromium.org> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* dediprog: add support for SF600David Woodhouse2016-02-181-14/+65
| | | | | | | | | | | | | | | | | | | | This patch is based on a number of changes by David Woodhouse and David Hendricks. SF600 uses two bulk endpoints, 1 for out and 2 for in unlike the SF100 that uses only a single one. This patch make endpoint usage more explicit and sets the in/out endpoint(s) appropriately for SF100 and SF600. Also, change all SF100-specific strings in messages and leave standalone mode on SF600s. Corresponding to flashrom svn r1927. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* List affected features for missing librariesCarl-Daniel Hailfinger2016-02-171-39/+44
| | | | | | | | | | | | | | | | | | If libpci, libusb0 or libusb1 are missing, make will now tell you which currently enabled features require those libraries. Example output: Checking for libusb-0.1/libusb-compat headers... not found. The following features require libusb-0.1/libusb-compat: CONFIG_PICKIT2_SPI CONFIG_DEDIPROG. Please install libusb-0.1 headers or libusb-compat headers. See README for more information. Corresponding to flashrom svn r1926. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
* ft2232_spi: Add support for Google Servo boards (v1 + v2)Todd Broch2016-02-143-2/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch has been cherry-picked from various patches in the chromiumos tree denoted below. Change-Id: I4b679e23ab37a4357b1e3d23f6f65a1c31f7d71a Change-Id: Ibda56201ab4519315431c08206c61ceffb7c7e65 Change-Id: I540ad2d304dc69a7c79ca154beb744ef947ff808 Servo V2 has two FT4232H parts. The first one (denoted 'legacy') is dedicated to supporting orginal Servo V1 functionality. The second, residing at USB ID 0x18d1:5003 provides two other SPI interfaces on port A and B respectively. Additional changes by Alexandru Gagniuc, Hatim Kanchwala and Urja Rannikko: - The clock divisor is set to '6', as this creates a 10MHz SPI clock, which is the same SPI clock that the chromiumos branch produced. - Add udev rule for Google servo boards to util/flashrom.rules. - Add Google servo entry to manpage. Corresponding to flashrom svn r1925. Signed-off-by: Todd Broch <tbroch@chromium.org> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Hatim Kanchwala <hatim@hatimak.me> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Hatim Kanchwala <hatim@hatimak.me> Acked-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix compilation on non-i386 architectures on OpenBSDStefan Tauner2016-02-071-1/+1
| | | | | | | | | | We use a header for MSR accesses on AMD Geodes that does only exist on 32 bit x86 machines. Corresponding to flashrom svn r1924. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for ESI ES25P40, ES25P80 and ES25P16Hatim Kanchwala2016-02-011-0/+93
| | | | | | | Corresponding to flashrom svn r1923. Signed-off-by: Hatim Kanchwala <hatim@hatimak.me> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Separate Am29F0xx from Am29F0xxA/B definitionsStefan Tauner2016-01-312-7/+88
| | | | | | | | | | The earlier versions of the chip require 0x2AAA for probes thus split the definitions and set them to untested to provoke reports. Corresponding to flashrom svn r1922. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for WCH CH341A as an SPI programmerUrja Rannikko2016-01-315-3/+592
| | | | | | | | Corresponding to flashrom svn r1921. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Add infrastructure to support libusb-1.0Stefan Tauner2016-01-312-2/+51
| | | | | | | Corresponding to flashrom svn r1920. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Makefile: print compile commands of configure steps to the build details fileStefan Tauner2016-01-241-1/+13
| | | | | | | | | | This allows for even more easy debugging of build failures due to problems with libraries. Corresponding to flashrom svn r1919. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* dediprog: support new communication protocol, cleanup and enable by defaultSimon Glass2016-01-232-113/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | The new protocol changes some commands, so adjust the code to support these. Use helper functions to reduce duplication in libusb calls. Testing with real hardware showed that the maximum read size via the control endpoint is about 16 bytes although specification does not mention that. Dediprog SF600 is not supported yet. Based on the following chromiumos changes: Change-Id: Ibd1e27d9e8273ba879b9b5d95675b99596255c89 Change-Id: Ifc33e7b1eed5b0cb80f83458fa24741a577fa46a Additionally, some ideas from Alex for cleaner code were incorporated as well. Tested on an SF100 V4 with both firmware generations PREWing a M25PX80 and AT45DB041D (the latter is using dediprog_spi_send_command() instead of optimized functions which make it a good test vehicle). Corresponding to flashrom svn r1918. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 24Stefan Tauner2016-01-2320-92/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASRock G31M-GS Reported by Александр Трубицын - ASRock G41M-VS3 Reported by Александр Трубицын - ASRock N68C-S UCC Reported by Alexey Belyaev - ASRock AMCP7AION-HT (ION 330HT(-BD)) Reported by Stefan Tauner - ASUS P5K SE Reported by Александр Трубицын - ASUS P5KPL-VM Reported by Marin Vlah - ASUS RAMPAGE III GENE Reported by stevessss on IRC - GIGABYTE GA-945GM-S2 Reported by Александр Трубицын - GIGABYTE GA-945GCM-S2 (rev. 3.0) Reported by Александр Трубицын - GIGABYTE GA-965P-S3 Reported by Александр Трубицын - GIGABYTE GA-EG43M-S2H Reported by Александр Трубицын - GIGABYTE GA-EP31-DS3L (rev. 1.0) Reported by Александр Трубицын - GIGABYTE GA-G33M-S2 Reported by Александр Трубицын - GIGABYTE GA-G33M-S2L Reported by Александр Трубицын - GIGABYTE GA-H55M-S2 Reported by Александр Трубицын - GIGABYTE GA-J1900N-D3V Reported by Marcos Truchado and Guillermo von Hünefeld - GIGABYTE GA-K8NS Reported by nicolae788 - GIGABYTE GA-M56S-S3 Reported by Estevo Paz Freire - GIGABYTE GA-P31-DS3L Reported by Александр Трубицын - GIGABYTE GA-P31-S3G Reported by Александр Трубицын - MSI MS-7336 Reported by Benjamin Bellec - MSI X79A-GD45 (8D) (MS-7760)" Reported by mortehu on IRC - Supermicro A1SAi-2550F Reported by Bernard Grymonpon - Supermicro X7DWT Reported by Steven Stremciuc Laptop: - ASUS U38N Reported by Ultra on IRC - Dell Latitude D630 Reported by Márton Miklós - Fujitsu Amilo Xi 3650 Reported by Elmar Stellnberger - Lenovo T400 (whitelisting only) Chipsets: - Mark 8086:1f38 (Intel Avoton/Rangeley) as tested Reported by Jeremy Porter and Bernard Grymonpon - Add Intel Sunrise Point IDs but no support yet. Flash chips: - Atmel AT45DB321D to PREW (+PREW) Reported by The Raven - Eon EN25QH32 to PREW (+PREW) Reported by Josua Mayer - Eon EN25QH64 to PREW (+EW) Reported by David s. Alessio - GigaDevice GD25LQ64(B) to PREW (+PREW) Reported by Greg Tippit - Intel 28F001BN/BX-T to PREW (+EW) Reported by Lu Xie - Micron M25P10-A to PREW (+W) Reported by the Raven - Micron M25PE40 Reported by David Wood - Micron N25Q128..3E to PREW (+PREW) Reported by Miklós Márton - Macronix MX25L3273E to PREW (+PREW) Reported by Roklobsta on IRC - Macronix MX23L6454 to PR (+PR) Reported by Steven Honeyman - Macronix MX25U6435E/F to PREW (+PREW) Reported by Marcos Truchado and Guillermo von Hünefeld - PMC Pm25LQ032C to PREW (+EW) Reported by Dirk Knop - Spansion S25FL016A to PREW (+EW) Reported by Márton Miklós - Spansion S25FL128S......0 to PREW (+PREW) Reported by Jim Houston - Spansion S25FL204K to PR (+PR) Reported by Thomas Debrunner - SST SST49LF016C to PREW (+EW) Reported by Steven Stremciuc - SST SST39VF040 to PREW (+PREW) Reported by Xavier Bourgeois - SST SST49LF040B to PREW (+EW) Reported by Rikard Åhlund - ST M25P10-A to PREW (+W) Reported by Martijn Schiedon - Winbond W39V040FA to PREW (+EW) Reported by Евгений Черкашин - Winbond W39V080FA to PREW (+EW) Reported by protagonist0 on IRC - Winbond W25Q80.W to PREW (+PREW) Reported by Miklós Márton - Winbond W25X64 to PREW (+REW) Reported by Johannes Krampf and Manuel Dejonghe - Fix ID of AMIC A25LQ64 Reported by Roman Titov - Fix page size of Spansion S25FL129P......1 Copy and paste error from the 128S uniform 256kB variant, probably. - Add Micron/Numonyx phase-change memory IDs Miscellaneous: - Detect Android target OS. No changes are required to build flashrom (excluding programmers with NEED_PCI) on Android. - Update rayerspi (spipgm) URL - Fix max_data_write handling of at45db. - Minor refinement of the README - Mark board enable for the GA-K8NS variants as tested. Tested by "nicolae788" on a board with socket 754. - Mark "Multi-system" chassis as non-laptop case. - Remove W836xx log requests. We got enough (and no one is looking at them for the time being anyway). - serprog: improve invalid reply error message, contributed by Urja Rannikko. - Remove default include paths for MinGW. - Disable implicit rules in the Makefile because we don't need them and they just make the build (imperceptibly) slower. - Enable our own strnlen() implementation not only on DJGPP but also if HAVE_STRNLEN is not defined. This is needed to get older BSDs (e.g. NetBSD 6.0, FreeBSD < 8.0) to work. - Tiny other stuff. Corresponding to flashrom svn r1917. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add atapromise programmerJoseph C. Lehner2016-01-165-4/+226
| | | | | | | | | | | | | | | | | | Supported controllers are Promise PDC20262 (FastTrak66/Ultra66), PDC20265 (FastTrak100 Lite/Ultra100), PDC20267 (FastTrak100/Ultra100). At least the Ultra100 only has address lines A0-A14 wired up, limiting addressable chip size to 32 kB. The flash chips mounted on those controllers usually is 128 kB, i.e. parts of the flash chip are inaccessible. As a workaround, the driver implicitly truncates the size of all flash chips to 32 kB. Works well for the factory installed flash. Do NOT use as a generic programmer for chips >32 kB. Corresponding to flashrom svn r1916. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Fix file descriptor leak in serial.cStefan Tauner2016-01-161-4/+6
| | | | | | | | | Found by Coverity as "CID 1348465: Resource leaks". Corresponding to flashrom svn r1915. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Set LC_ALL globally in MakefileStefan Tauner2016-01-141-1/+11
| | | | | | | | | | | This won't work for the majority of relevant commands because they use the $(shell) function and GNU make does not relay variables exported within the makefile to their evironment. Corresponding to flashrom svn r1914. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Pimp the manpage to create nicer hyperlinks and HTML outputStefan Tauner2016-01-147-66/+116
| | | | | | | | | | Also, add a target to the makefile to build a flashrom.8.html with groff. To fix some formatting issues this adds some indention commands as well. Corresponding to flashrom svn r1913. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for linking statically with CONFIG_STATIC=yesStefan Tauner2016-01-071-0/+5
| | | | | | | | | | | | | | This is loosly based on the following changes of chromiumos: - flashrom: Add default pkg-config definition. Change-Id: I28744af0fd2d2d0bcc4569a5fbef370321691267 - Fix FT2232 feature on static builds. Change-Id: I70d4a7bda573b64cb18429a21792455b018c4cba Corresponding to flashrom svn r1912. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Make make errors more less flashilyStefan Tauner2016-01-071-60/+68
| | | | | | | | | | | | | | | | | | Previously we have hid almost all error messages from called tools like pkg-config or the compiler in the "configure" step. Only exceptions were the library checks because Carl-Daniel felt it improved usability in case of missing headers etc. However, this makes the output of the makefile less readable and in the case of pkg-config fallbacks the error messages are actually expected. Instead of throwing a part of the detailed stderr outputs of the tools into the face of the users and completely hiding others, write all of them into a separate log file instead. Corresponding to flashrom svn r1911. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* makefile: fix exports of PKG_CONFIG_LIBDIR for pkg-config callsStefan Tauner2016-01-071-3/+3
| | | | | | | | | The parenthesis pushed the exports into a subshell thus made them useless. Corresponding to flashrom svn r1910. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* serial: support arbitrary baud rates on WindowsUrja Rannikko2016-01-041-30/+34
| | | | | | | | | | | | Available baud rates obviously depend on driver support, but the CBR_ defines used so far are basically only for backwards source compatibility with Win16, so dont bother with them. Corresponding to flashrom svn r1909. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* serprog: fix missing device parameter error message on WindowsUrja Rannikko2016-01-041-2/+8
| | | | | | | | | | | Previously, flashrom -p serprog didnt notice a completely missing dev= string on Windows. Also, the error message shown if no device name followed contained a misleading "/dev/...". Corresponding to flashrom svn r1908. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* serprog: allow to omit specifying a baud rateStefan Tauner2016-01-044-46/+53
| | | | | | | | | | | On USB-based serial connections (VCP) the requested baud rate usually does not matter (much). Remove the arbitrary restriction and use whatever default values the OS/hardware provides. Corresponding to flashrom svn r1907. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
* serprog: ignore failures when setting serial port optionsStefan Tauner2016-01-041-5/+18
| | | | | | | | | | | | There is no good reason to abort earlier just because some options did not stick. This should improve compatibility without negative effects. If communication is affected by the missing flag(s) then we abort later anyway. Corresponding to flashrom svn r1906. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
* serprog: clear NDELAY flag only once after opening the portStefan Tauner2016-01-041-5/+13
| | | | | | | | | | | Change sp_openserport() to directly clear the O_NONBLOCK flag that is potentially set by opening the device with O_NDELAY instead of clearing ALL flags in serialport_config() unconditionally. Corresponding to flashrom svn r1905. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Add support for libftdi1Alexandru Gagniuc2015-12-251-4/+6
| | | | | | | | | | | | | | Many distros no longer provide libftdi 0.2, and as a result, programmers that depend on libftdi must be disabled to compile flashrom. Luckily the libftdi API did not change significantly, so for our purposes, we can simply use the newer headers and link to the newer library if it is available. Corresponding to flashrom svn r1904. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Sanyo LE25FU406C/LE25U40CMCStefan Tauner2015-12-252-0/+38
| | | | | | | | Corresponding to flashrom svn r1903. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Jose Luis León <zenky1@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Rigorously check integrity of I/O stream dataStefan Tauner2015-12-253-26/+50
| | | | | | | | | | | | | | | | | | | | | | | | | Even if fwrite() succeeds the data is not necessarily out of the clib's buffers and writing it eventually could fail. Even if the data is flushed out (explicitly by fflush() or implicitly by fclose()) the kernel might still hold a buffer. Previously we have ignored this to a large extent - even in important cases like writing the flash contents to a file. The results can be truncated images that would brick the respective machine if written back as is (though flashrom would not allow that due to a size mismatch). flashrom would not indicate the problem in any output - so far we only check the return value of fwrite() that is not conclusive. This patch checks the return values of all related system calls like fclose() unless we only read the file and are not really interested in output errors. In the latter case the return value is casted to void to document this fact. Additionally, this patch explicitly calls fflush() and fsync() (on regular files only) to do the best we can to guarantee the read image reaches the disk safely and at least inform the user if it did not work. Corresponding to flashrom svn r1902. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Add support for SST SST25WF020A, SST25WF040B, SST25WF080BBen Gardner2015-11-224-5/+125
| | | | | | | | | | | | | | | | Apart from the strange ID (using Sanyo's vendor ID 0x62) the main difference from the plain SST25WF series is that they lack op codes 0xAD (AAI Word program) and 0x52 (32K erase). The smallest version does not support dual I/O operations either. SST25WF080B was tested under Linux with spidev. Corresponding to flashrom svn r1901. Tested-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for VIA VT8251Stefan Tauner2015-11-211-0/+1
| | | | | | | | | | | | | Seems to work on IBM SurePOS 700 and IBM (now Toshiba) AnyPlace Kiosk Model 4838-310. Tested-by: Jason Vannest <Jason_Vannest@abercrombie.com> Tested-by: Rowlinson Mark <Mark.Rowlinson@uk.fujitsu.com> Corresponding to flashrom svn r1900. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Use nanosleep() instead of usleep() where availableStefan Tauner2015-11-141-1/+4
| | | | | | | | | | Usleep() has been obsolete for quite a while. The only target that uses it without alternative is DOS. Corresponding to flashrom svn r1899. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add (implicit) support for musl libcGwenhael Goavec-Merou2015-11-142-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is mostly achieved by fixing or refining the inclusion of header files and replacing glibc-specific ifdefs with more generic ones. - <sys/io.h>: Contains iopl(2) and x86 I/O port access functions (inb, outb etc). Generally Linux-specific but also availble on debian/kFreeBSD. Provided by glibc as well as musl and uclibc. Include it if we are running Linux or if glibc is detected. - <sys/fcntl.h>: should be (and is) replaced by <fcntl.h> (without the "sys" prefix). - <linux/spi/spidev.h>: Does not include all necessary headers, namely _IOC_SIZEBITS that is used in the definition of SPI_MSGSIZE is not brought in via <linux/ioctl.h> but instead we relied so far on glibc's including it via <sys/ioctl.h>. Change that to explicitly including <linux/ioctl.h>. - <endian.h>: Would also be available in musl but there is no easy way to detect it so we do not try yet. Corresponding to flashrom svn r1898. The bug report and initial patches were Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for 128 bytes write granularityPaul Kocialkowski2015-10-162-0/+7
| | | | | | | | | | Some chips such as the ENE KB9012 internal flash require a write granularity of 128 bytes. Corresponding to flashrom svn r1897. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Nico Huber <nico.h@gmx.de>
* dediprog: Tidy up commands and remove dead nonsense codeSimon Glass2015-07-051-254/+136
| | | | | | | | | | | | | | | | | | | Use names for the commands and request types instead of magic numbers and remove some of the unnecessary unexplained arguments. Also, cleanup the nonsense code left over from RE. Most of it can not be explained by official documentation and was recorded with ancient firmware/software. Based on the following chromiumos changes: Change-Id: I80a0dcdf40eedc89da48fb2c54cd9d9fd13e6fa1 Change-Id: If61bac2c8194b3ec30a80422d871842c66f0cd74 Corresponding to flashrom svn r1896. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: David Hendricks <dhendrix@chromium.org>
* serprog: Fix FWH/LPC by implementing serprog_mapUrja Rannikko2015-06-293-1/+18
| | | | | | | | | | | | | The serprog protocol does only transmit 24 bit-wide address and ignores the top 8 bit. This is fine as long as the underlying hardware ignores the latter anyway (which is the case for parallel chips that even lack the respective pins). FWH/LPC chips, however, operate on a full 32-bit (LPC) or 28-bit (FWH) address space and would fail with the fallback mapping to NULL. Corresponding to flashrom svn r1895. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* dediprog: Invert the LED polarity in the codeSimon Glass2015-06-281-49/+42
| | | | | | | | | | | | | | | | | Previously we have used low-active macros (because the hardware and old protocol were so too) and set every single LED explicitly although we only used a limited number of combinations. Using an enumeration for commonly used values instead makes things easier. Based on the following chromiumos change: Change-Id: Ie481a583e623cdc45e3649a4db69b15570f65a7b Corresponding to flashrom svn r1894. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: David Hendricks <dhendrix@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 05:44:51 +0000