diff options
| -rw-r--r-- | Makefile | 25 | ||||
| -rw-r--r-- | flashrom.c | 12 | ||||
| -rw-r--r-- | lspcon_i2c_spi.c | 505 | ||||
| -rw-r--r-- | meson.build | 5 | ||||
| -rw-r--r-- | meson_options.txt | 1 | ||||
| -rw-r--r-- | programmer.h | 8 |
6 files changed, 556 insertions, 0 deletions
@@ -195,6 +195,11 @@ UNSUPPORTED_FEATURES += CONFIG_STLINKV3_SPI=yes else override CONFIG_STLINKV3_SPI = no endif +ifeq ($(CONFIG_LSPCON_I2C_SPI), yes) +UNSUPPORTED_FEATURES += CONFIG_LSPCON_I2C_SPI=yes +else +override CONFIG_LSPCON_I2C_SPI = no +endif # libjaylink is also not available for DOS ifeq ($(CONFIG_JLINK_SPI), yes) UNSUPPORTED_FEATURES += CONFIG_JLINK_SPI=yes @@ -306,6 +311,11 @@ UNSUPPORTED_FEATURES += CONFIG_SATAMV=yes else override CONFIG_SATAMV = no endif +ifeq ($(CONFIG_LSPCON_I2C_SPI), yes) +UNSUPPORTED_FEATURES += CONFIG_LSPCON_I2C_SPI=yes +else +override CONFIG_LSPCON_I2C_SPI = no +endif endif ifneq ($(TARGET_OS), MinGW) @@ -381,6 +391,11 @@ UNSUPPORTED_FEATURES += CONFIG_STLINKV3_SPI=yes else override CONFIG_STLINKV3_SPI = no endif +ifeq ($(CONFIG_LSPCON_I2C_SPI), yes) +UNSUPPORTED_FEATURES += CONFIG_LSPCON_I2C_SPI=yes +else +override CONFIG_LSPCON_I2C_SPI = no +endif ifeq ($(CONFIG_CH341A_SPI), yes) UNSUPPORTED_FEATURES += CONFIG_CH341A_SPI=yes else @@ -656,6 +671,9 @@ CONFIG_PICKIT2_SPI ?= yes # Always enable STLink V3 CONFIG_STLINKV3_SPI ?= yes +# Disables LSPCON support until the i2c helper supports multiple systems. +CONFIG_LSPCON_I2C_SPI ?= no + # Always enable dummy tracing for now. CONFIG_DUMMY ?= yes @@ -736,6 +754,7 @@ override CONFIG_DEVELOPERBOX_SPI = no override CONFIG_PICKIT2_SPI = no override CONFIG_RAIDEN = no override CONFIG_STLINKV3_SPI = no +override CONFIG_LSPCON_I2C_SPI = no endif ifeq ($(CONFIG_ENABLE_LIBPCI_PROGRAMMERS), no) override CONFIG_INTERNAL = no @@ -914,6 +933,12 @@ PROGRAMMER_OBJS += stlinkv3_spi.o NEED_LIBUSB1 += CONFIG_STLINKV3_SPI endif +ifeq ($(CONFIG_LSPCON_I2C_SPI), yes) +FEATURE_CFLAGS += -D'CONFIG_LSPCON_I2C_SPI=1' +PROGRAMMER_OBJS += lspcon_i2c_spi.o +NEED_LIBUSB1 += CONFIG_LSPCON_I2C_SPI +endif + ifneq ($(NEED_LIBFTDI), ) FTDILIBS := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --libs libftdi1 || $(PKG_CONFIG) --libs libftdi || printf "%s" "-lftdi -lusb") FEATURE_CFLAGS += $(call debug_shell,grep -q "FT232H := yes" .features && printf "%s" "-D'HAVE_FT232H=1'") @@ -389,6 +389,18 @@ const struct programmer_entry programmer_table[] = { }, #endif +#if CONFIG_LSPCON_I2C_SPI == 1 + { + .name = "lspcon_i2c_spi", + .type = OTHER, + .devs.note = "Device files /dev/i2c-*.\n", + .init = lspcon_i2c_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + #if CONFIG_USBBLASTER_SPI == 1 { .name = "usbblaster_spi", diff --git a/lspcon_i2c_spi.c b/lspcon_i2c_spi.c new file mode 100644 index 00000000..4c854264 --- /dev/null +++ b/lspcon_i2c_spi.c @@ -0,0 +1,505 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2020 The Chromium OS Authors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <stdint.h> +#include <stdio.h> +#include <string.h> +#include <time.h> +#include <errno.h> + +#include "programmer.h" +#include "spi.h" +#include "i2c_helper.h" + +#define REGISTER_ADDRESS (0x94 >> 1) +#define PAGE_ADDRESS (0x9e >> 1) +#define PAGE_SIZE 256 +#define MAX_SPI_WAIT_RETRIES 1000 + +#define CLT2_SPI 0x82 +#define SPIEDID_BASE_ADDR2 0x8d +#define ROMADDR_BYTE1 0x8e +#define ROMADDR_BYTE2 0x8f +#define SWSPI_WDATA 0x90 + #define SWSPI_WDATA_CLEAR_STATUS 0x00 + #define SWSPI_WDATA_WRITE_REGISTER 0x01 + #define SWSPI_WDATA_READ_REGISTER 0x05 + #define SWSPI_WDATA_ENABLE_REGISTER 0x06 + #define SWSPI_WDATA_SECTOR_ERASE 0x20 + #define SWSPI_WDATA_PROTECT_BP 0x8c +#define SWSPI_RDATA 0x91 +#define SWSPI_LEN 0x92 +#define SWSPICTL 0x93 + #define SWSPICTL_ACCESS_TRIGGER 1 + #define SWSPICTL_CLEAR_PTR (1 << 1) + #define SWSPICTL_NO_READ (1 << 2) + #define SWSPICTL_ENABLE_READBACK (1 << 3) + #define SWSPICTL_MOT (1 << 4) +#define SPISTATUS 0x9e + #define SPISTATUS_BYTE_PROGRAM_FINISHED 0 + #define SPISTATUS_BYTE_PROGRAM_IN_IF 1 + #define SPISTATUS_BYTE_PROGRAM_SEND_DONE (1 << 1) + #define SPISTATUS_SECTOR_ERASE_FINISHED 0 + #define SPISTATUS_SECTOR_ERASE_IN_IF (1 << 2) + #define SPISTATUS_SECTOR_ERASE_SEND_DONE (1 << 3) + #define SPISTATUS_CHIP_ERASE_FINISHED 0 + #define SPISTATUS_CHIP_ERASE_IN_IF (1 << 4) + #define SPISTATUS_CHIP_ERASE_SEND_DONE (1 << 5) + #define SPISTATUS_FW_UPDATE_ENABLE (1 << 6) +#define WRITE_PROTECTION 0xb3 + #define WRITE_PROTECTION_ON 0 + #define WRITE_PROTECTION_OFF 0x10 +#define MPU 0xbc +#define PAGE_HW_WRITE 0xda + #define PAGE_HW_WRITE_DISABLE 0 + #define PAGE_HW_COFIG_REGISTER 0xaa + #define PAGE_HW_WRITE_ENABLE 0x55 + +struct lspcon_i2c_spi_data { + int fd; +}; + +typedef struct { + uint8_t command; + const uint8_t *data; + uint8_t data_size; + uint8_t control; +} packet_t; + +static int lspcon_i2c_spi_write_data(int fd, uint16_t addr, void *buf, uint16_t len) +{ + i2c_buffer_t data; + if (i2c_buffer_t_fill(&data, buf, len)) + return SPI_GENERIC_ERROR; + + return i2c_write(fd, addr, &data) == len ? 0 : SPI_GENERIC_ERROR; +} + +static int lspcon_i2c_spi_read_data(int fd, uint16_t addr, void *buf, uint16_t len) +{ + i2c_buffer_t data; + if (i2c_buffer_t_fill(&data, buf, len)) + return SPI_GENERIC_ERROR; + + return i2c_read(fd, addr, &data) == len ? 0 : SPI_GENERIC_ERROR; +} + +static int get_fd_from_context(struct flashctx *flash) +{ + if (!flash || !flash->mst || !flash->mst->spi.data) { + msg_perr("Unable to extract fd from flash context.\n"); + return SPI_GENERIC_ERROR; + } + const struct lspcon_i2c_spi_data *data = + (const struct lspcon_i2c_spi_data *)flash->mst->spi.data; + + return data->fd; +} + +static int lspcon_i2c_spi_write_register(int fd, uint8_t i2c_register, uint8_t value) +{ + uint8_t command[] = { i2c_register, value }; + return lspcon_i2c_spi_write_data(fd, REGISTER_ADDRESS, command, 2); +} + +static int lspcon_i2c_spi_read_register(int fd, uint8_t i2c_register, uint8_t *value) +{ + uint8_t command[] = { i2c_register }; + int ret = lspcon_i2c_spi_write_data(fd, REGISTER_ADDRESS, command, 1); + ret |= lspcon_i2c_spi_read_data(fd, REGISTER_ADDRESS, value, 1); + + return ret ? SPI_GENERIC_ERROR : 0; +} + +static int lspcon_i2c_spi_register_control(int fd, packet_t *packet) +{ + int i; + int ret = lspcon_i2c_spi_write_register(fd, SWSPI_WDATA, packet->command); + if (ret) + return ret; + + /* Higher 4 bits are read size. */ + int write_size = packet->data_size & 0x0f; + for (i = 0; i < write_size; ++i) { + ret |= lspcon_i2c_spi_write_register(fd, SWSPI_WDATA, packet->data[i]); + } + + ret |= lspcon_i2c_spi_write_register(fd, SWSPI_LEN, packet->data_size); + ret |= lspcon_i2c_spi_write_register(fd, SWSPICTL, packet->control); + + return ret; +} + +static int lspcon_i2c_spi_wait_command_done(int fd, unsigned int offset, int mask) +{ + uint8_t val; + int tried = 0; + int ret = 0; + do { + ret |= lspcon_i2c_spi_read_register(fd, offset, &val); + } while(!ret && (val & mask) && ++tried < MAX_SPI_WAIT_RETRIES); + + if (tried == MAX_SPI_WAIT_RETRIES) { + msg_perr("Error: Time out on sending command.\n"); + return -MAX_SPI_WAIT_RETRIES; + } + + return (val & mask) ? SPI_GENERIC_ERROR : ret; +} + +static int lspcon_i2c_spi_wait_rom_free(int fd) +{ + uint8_t val; + int tried = 0; + int ret = 0; + ret |= lspcon_i2c_spi_wait_command_done(fd, SPISTATUS, + SPISTATUS_SECTOR_ERASE_IN_IF | SPISTATUS_SECTOR_ERASE_SEND_DONE); + if (ret) + return ret; + + do { + packet_t packet = { SWSPI_WDATA_READ_REGISTER, NULL, 0, SWSPICTL_ACCESS_TRIGGER }; + ret |= lspcon_i2c_spi_register_control(fd, &packet); + ret |= lspcon_i2c_spi_wait_command_done(fd, SWSPICTL, SWSPICTL_ACCESS_TRIGGER); + ret |= lspcon_i2c_spi_read_register(fd, SWSPI_RDATA, &val); + } while (!ret && (val & SWSPICTL_ACCESS_TRIGGER) && ++tried < MAX_SPI_WAIT_RETRIES); + + if (tried == MAX_SPI_WAIT_RETRIES) { + msg_perr("Error: Time out on waiting ROM free.\n"); + return -MAX_SPI_WAIT_RETRIES; + } + + return (val & SWSPICTL_ACCESS_TRIGGER) ? SPI_GENERIC_ERROR : ret; +} + +static int lspcon_i2c_spi_toggle_register_protection(int fd, int toggle) +{ + return lspcon_i2c_spi_write_register(fd, WRITE_PROTECTION, + toggle ? WRITE_PROTECTION_OFF : WRITE_PROTECTION_ON); +} + +static int lspcon_i2c_spi_enable_write_status_register(int fd) +{ + int ret = lspcon_i2c_spi_toggle_register_protection(fd, 1); + packet_t packet = { + SWSPI_WDATA_ENABLE_REGISTER, NULL, 0, SWSPICTL_ACCESS_TRIGGER | SWSPICTL_NO_READ }; + ret |= lspcon_i2c_spi_register_control(fd, &packet); + ret |= lspcon_i2c_spi_toggle_register_protection(fd, 0); + + return ret; +} + +static int lspcon_i2c_spi_enable_write_status_register_protection(int fd) +{ + int ret = lspcon_i2c_spi_toggle_register_protection(fd, 1); + uint8_t data[] = { SWSPI_WDATA_PROTECT_BP }; + packet_t packet = { + SWSPI_WDATA_WRITE_REGISTER, data, 1, SWSPICTL_ACCESS_TRIGGER | SWSPICTL_NO_READ }; + ret |= lspcon_i2c_spi_register_control(fd, &packet); + ret |= lspcon_i2c_spi_toggle_register_protection(fd, 0); + + return ret; +} + +static int lspcon_i2c_spi_disable_protection(int fd) +{ + int ret = lspcon_i2c_spi_toggle_register_protection(fd, 1); + uint8_t data[] = { SWSPI_WDATA_CLEAR_STATUS }; + packet_t packet = { + SWSPI_WDATA_WRITE_REGISTER, data, 1, SWSPICTL_ACCESS_TRIGGER | SWSPICTL_NO_READ }; + ret |= lspcon_i2c_spi_register_control(fd, &packet); + ret |= lspcon_i2c_spi_toggle_register_protection(fd, 0); + + return ret; +} + +static int lspcon_i2c_spi_disable_hw_write(int fd) +{ + return lspcon_i2c_spi_write_register(fd, PAGE_HW_WRITE, PAGE_HW_WRITE_DISABLE); +} + +static int lspcon_i2c_spi_enable_write_protection(int fd) +{ + int ret = lspcon_i2c_spi_enable_write_status_register(fd); + ret |= lspcon_i2c_spi_enable_write_status_register_protection(fd); + ret |= lspcon_i2c_spi_wait_rom_free(fd); + ret |= lspcon_i2c_spi_disable_hw_write(fd); + + return ret; +} + +static int lspcon_i2c_spi_disable_all_protection(int fd) +{ + int ret = lspcon_i2c_spi_enable_write_status_register(fd); + ret |= lspcon_i2c_spi_disable_protection(fd); + ret |= lspcon_i2c_spi_wait_rom_free(fd); + + return ret; +} + +static int lspcon_i2c_spi_send_command(struct flashctx *flash, + unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) +{ + unsigned int i; + if (writecnt > 16 || readcnt > 16 || writecnt == 0) { + msg_perr("Error: Invalid read/write count for send command.\n"); + return SPI_GENERIC_ERROR; + } + + int fd = get_fd_from_context(flash); + if (fd < 0) + return SPI_GENERIC_ERROR; + + int ret = lspcon_i2c_spi_disable_all_protection(fd); + ret |= lspcon_i2c_spi_enable_write_status_register(fd); + ret |= lspcon_i2c_spi_toggle_register_protection(fd, 1); + + /* First byte of writearr shuld be the command value, followed by the value to write. + Read length occupies 4 bit and represents 16 level, thus if read 1 byte, + read length should be set 0. */ + packet_t packet = { + writearr[0], &writearr[1], (writecnt - 1) | ((readcnt - 1) << 4), + SWSPICTL_ACCESS_TRIGGER | (readcnt ? 0 : SWSPICTL_NO_READ), + }; + + ret |= lspcon_i2c_spi_register_control(fd, &packet); + ret |= lspcon_i2c_spi_wait_command_done(fd, SWSPICTL, SWSPICTL_ACCESS_TRIGGER); + ret |= lspcon_i2c_spi_toggle_register_protection(fd, 0); + if (ret) + return ret; + + for (i = 0; i < readcnt; ++i) { + ret |= lspcon_i2c_spi_read_register(fd, SWSPI_RDATA, &readarr[i]); + } + + ret |= lspcon_i2c_spi_wait_rom_free(fd); + + return ret; +} + +static int lspcon_i2c_spi_enable_hw_write(int fd) +{ + int ret = 0; + ret |= lspcon_i2c_spi_write_register(fd, PAGE_HW_WRITE, PAGE_HW_COFIG_REGISTER); + ret |= lspcon_i2c_spi_write_register(fd, PAGE_HW_WRITE, PAGE_HW_WRITE_ENABLE); + ret |= lspcon_i2c_spi_write_register(fd, PAGE_HW_WRITE, 0x50); + ret |= lspcon_i2c_spi_write_register(fd, PAGE_HW_WRITE, 0x41); + ret |= lspcon_i2c_spi_write_register(fd, PAGE_HW_WRITE, 0x52); + ret |= lspcon_i2c_spi_write_register(fd, PAGE_HW_WRITE, 0x44); + + return ret; +} + +static int lspcon_i2c_clt2_spi_reset(int fd) +{ + int ret = 0; + ret |= lspcon_i2c_spi_write_register(fd, CLT2_SPI, 0x20); + struct timespec wait_100ms = { 0, (unsigned)1e8 }; + nanosleep(&wait_100ms, NULL); + ret |= lspcon_i2c_spi_write_register(fd, CLT2_SPI, 0x00); + + return ret; +} + +static int lspcon_i2c_spi_reset_mpu_stop(int fd) +{ + int ret = 0; + ret |= lspcon_i2c_spi_write_register(fd, MPU, 0xc0); // cmd mode + ret |= lspcon_i2c_spi_write_register(fd, MPU, 0x40); // stop mcu + + return ret; +} + +static int lspcon_i2c_spi_map_page(int fd, unsigned int offset) +{ + int ret = 0; + /* Page number byte, need to / PAGE_SIZE. */ + ret |= lspcon_i2c_spi_write_register(fd, ROMADDR_BYTE1, (offset >> 8) & 0xff); + ret |= lspcon_i2c_spi_write_register(fd, ROMADDR_BYTE2, (offset >> 16)); + + return ret ? SPI_GENERIC_ERROR : 0; +} + +static int lspcon_i2c_spi_read(struct flashctx *flash, uint8_t *buf, + unsigned int start, unsigned int len) +{ + unsigned int i; + int ret = 0; + if (start & 0xff) + return default_spi_read(flash, buf, start, len); + + int fd = get_fd_from_context(flash); + if (fd < 0) + return SPI_GENERIC_ERROR; + + for (i = 0; i < len; i += PAGE_SIZE) { + ret |= lspcon_i2c_spi_map_page(fd, start + i); + ret |= lspcon_i2c_spi_read_data(fd, PAGE_ADDRESS, buf + i, min(len - i, PAGE_SIZE)); + } + + return ret; +} + +static int lspcon_i2c_spi_write_page(int fd, const uint8_t *buf, unsigned int len) +{ + /** + * Using static buffer with maximum possible size, + * extra byte is needed for prefixing zero at index 0. + */ + uint8_t write_buffer[PAGE_SIZE + 1] = { 0 }; + if (len > PAGE_SIZE) + return SPI_GENERIC_ERROR; + + /* First byte represents the writing offset and should always be zero. */ + memcpy(&write_buffer[1], buf, len); + + return lspcon_i2c_spi_write_data(fd, PAGE_ADDRESS, write_buffer, len + 1); +} + +static int lspcon_i2c_spi_write_256(struct flashctx *flash, const uint8_t *buf, + unsigned int start, unsigned int len) +{ + int ret = 0; + if (start & 0xff) + return default_spi_write_256(flash, buf, start, len); + + int fd = get_fd_from_context(flash); + if (fd < 0) + return SPI_GENERIC_ERROR; + + ret |= lspcon_i2c_spi_disable_all_protection(fd); + /* Enable hardware write and reset clt2SPI interface. */ + ret |= lspcon_i2c_spi_enable_hw_write(fd); + ret |= lspcon_i2c_clt2_spi_reset(fd); + + for (unsigned int i = 0; i < len; i += PAGE_SIZE) { + ret |= lspcon_i2c_spi_map_page(fd, start + i); + ret |= lspcon_i2c_spi_write_page(fd, buf + i, min(len - i, PAGE_SIZE)); + } + + ret |= lspcon_i2c_spi_enable_write_protection(fd); + ret |= lspcon_i2c_spi_disable_hw_write(fd); + + return ret; +} + +static int lspcon_i2c_spi_write_aai(struct flashctx *flash, const uint8_t *buf, + unsigned int start, unsigned int len) +{ + msg_perr("Error: AAI write function is not supported.\n"); + return SPI_GENERIC_ERROR; +} + +static const struct spi_master spi_master_i2c_lspcon = { + .max_data_read = 16, + .max_data_write = 12, + .command = lspcon_i2c_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = lspcon_i2c_spi_read, + .write_256 = lspcon_i2c_spi_write_256, + .write_aai = lspcon_i2c_spi_write_aai, +}; + +/* TODO: MPU still stopped at this point, probably need to reset it. */ +static int lspcon_i2c_spi_shutdown(void *data) +{ + int ret = 0; + struct lspcon_i2c_spi_data *lspcon_data = + (struct lspcon_i2c_spi_data *)data; + int fd = lspcon_data->fd; + ret |= lspcon_i2c_spi_enable_write_protection(fd); + ret |= lspcon_i2c_spi_toggle_register_protection(fd, 0); + i2c_close(fd); + free(data); + + return ret; +} + +/* TODO: remove this out of the specific SPI master implementation. */ +static int get_bus(void) +{ + char *bus_str = extract_programmer_param("bus"); + int ret = SPI_GENERIC_ERROR; + if (bus_str) { + char *bus_suffix; + errno = 0; + int bus = (int)strtol(bus_str, &bus_suffix, 10); + if (errno != 0 || bus_str == bus_suffix) { + msg_perr("Error: Could not convert 'bus'.\n"); + goto get_bus_done; + } + + if (bus < 0 || bus > 255) { + msg_perr("Error: Value for 'bus' is out of range(0-255).\n"); + goto get_bus_done; + } + + if (strlen(bus_suffix) > 0) { + msg_perr("Error: Garbage following 'bus' value.\n"); + goto get_bus_done; + } + + msg_pinfo("Using i2c bus %i.\n", bus); + ret = bus; + goto get_bus_done; + } else { + msg_perr("Error: Bus number not specified.\n"); + } +get_bus_done: + if (bus_str) + free(bus_str); + + return ret; +} + +static int register_lspcon_i2c_spi_master(void *ptr) +{ + struct spi_master mst = spi_master_i2c_lspcon; + mst.data = ptr; + + return register_spi_master(&mst); +} + +int lspcon_i2c_spi_init(void) +{ + int lspcon_i2c_spi_bus = get_bus(); + if (lspcon_i2c_spi_bus < 0) + return SPI_GENERIC_ERROR; + + int ret = 0; + int fd = i2c_open(lspcon_i2c_spi_bus, REGISTER_ADDRESS, 0); + if (fd < 0) + return fd; + + ret |= lspcon_i2c_spi_reset_mpu_stop(fd); + if (ret) + return ret; + + struct lspcon_i2c_spi_data *data = calloc(1, sizeof(struct lspcon_i2c_spi_data)); + if (!data) { + msg_perr("Unable to allocate space for extra SPI master data.\n"); + return SPI_GENERIC_ERROR; + } + + data->fd = fd; + ret |= register_shutdown(lspcon_i2c_spi_shutdown, data); + ret |= register_lspcon_i2c_spi_master(data); + + return ret; +} diff --git a/meson.build b/meson.build index b847c63b..699370a6 100644 --- a/meson.build +++ b/meson.build @@ -63,6 +63,7 @@ config_satasii = get_option('config_satasii') config_serprog = get_option('config_serprog') config_usbblaster_spi = get_option('config_usbblaster_spi') config_stlinkv3_spi = get_option('config_stlinkv3_spi') +config_lspcon_i2c_spi = get_option('config_lspcon_i2c_spi') cargs = [] deps = [] @@ -283,6 +284,10 @@ if config_stlinkv3_spi srcs += 'stlinkv3_spi.c' cargs += '-DCONFIG_STLINKV3_SPI=1' endif +if config_lspcon_i2c_spi + srcs += 'lspcon_i2c_spi.c' + cargs += '-DCONFIG_LSPCON_I2C_SPI=1' +endif # bitbanging SPI infrastructure if config_bitbang_spi diff --git a/meson_options.txt b/meson_options.txt index 28312716..a103dc60 100644 --- a/meson_options.txt +++ b/meson_options.txt @@ -35,3 +35,4 @@ option('config_satasii', type : 'boolean', value : true, description : 'SiI SATA option('config_serprog', type : 'boolean', value : true, description : 'serprog') option('config_usbblaster_spi', type : 'boolean', value : true, description : 'Altera USB-Blaster dongles') option('config_stlinkv3_spi', type : 'boolean', value : true, description : 'STMicroelectronics STLINK-V3') +option('config_lspcon_i2c_spi', type : 'boolean', value : false, description : 'Parade lspcon USB-C to HDMI protocol translator') diff --git a/programmer.h b/programmer.h index 9a41be10..f6c53996 100644 --- a/programmer.h +++ b/programmer.h @@ -130,6 +130,9 @@ enum programmer { #if CONFIG_STLINKV3_SPI == 1 PROGRAMMER_STLINKV3_SPI, #endif +#if CONFIG_LSPCON_I2C_SPI == 1 + PROGRAMMER_LSPCON_I2C_SPI, +#endif PROGRAMMER_INVALID /* This must always be the last entry. */ }; @@ -811,4 +814,9 @@ struct libusb_device_handle *usb_dev_get_by_vid_pid_serial( struct libusb_device_handle *usb_dev_get_by_vid_pid_number( struct libusb_context *usb_ctx, uint16_t vid, uint16_t pid, unsigned int num); +/* lspcon_i2c_spi.c */ +#if CONFIG_LSPCON_I2C_SPI == 1 +int lspcon_i2c_spi_init(void); +#endif + #endif /* !__PROGRAMMER_H__ */ |