Version abc70930

10 files changed, 3204 insertions, 0 deletions

diff --git a/abc70930/src/bdd/reo/module.make b/abc70930/src/bdd/reo/module.make
new file mode 100644
index 00000000..7eb41e0e
--- /dev/null
+++ b/abc70930/src/bdd/reo/module.make
@@ -0,0 +1,7 @@
+SRC +=    src/bdd/reo/reoApi.c \
+    src/bdd/reo/reoCore.c \
+    src/bdd/reo/reoProfile.c \
+    src/bdd/reo/reoSift.c \
+    src/bdd/reo/reoSwap.c \
+    src/bdd/reo/reoTransfer.c \
+    src/bdd/reo/reoUnits.c
diff --git a/abc70930/src/bdd/reo/reo.h b/abc70930/src/bdd/reo/reo.h
new file mode 100644
index 00000000..1a31242a
--- /dev/null
+++ b/abc70930/src/bdd/reo/reo.h
@@ -0,0 +1,232 @@
+/**CFile****************************************************************
+
+  FileName    [reo.h]
+
+  PackageName [REO: A specialized DD reordering engine.]
+
+  Synopsis    [External and internal declarations.]
+
+  Author      [Alan Mishchenko]
+  
+  Affiliation [UC Berkeley]
+
+  Date        [Ver. 1.0. Started - October 15, 2002.]
+
+  Revision    [$Id: reo.h,v 1.0 2002/15/10 03:00:00 alanmi Exp $]
+
+***********************************************************************/
+
+#ifndef __REO_H__
+#define __REO_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "extra.h"
+
+//#pragma warning( disable : 4514 )
+
+////////////////////////////////////////////////////////////////////////
+///                     MACRO DEFINITIONS                            ///
+////////////////////////////////////////////////////////////////////////
+
+// reordering parameters
+#define REO_REORDER_LIMIT      1.15  // determines the quality/runtime trade-off
+#define REO_QUAL_PAR              3  // the quality [1 = simple lower bound, 2 = strict, larger = heuristic]
+// internal parameters
+#define REO_CONST_LEVEL       30000  // the number of the constant level
+#define REO_TOPREF_UNDEF      30000  // the undefined top reference
+#define REO_CHUNK_SIZE         5000  // the number of units allocated at one time
+#define REO_COST_EPSILON  0.0000001  // difference in cost large enough so that it counted as an error
+#define REO_HIGH_VALUE     10000000  // a large value used to initialize some variables
+// interface parameters
+#define REO_ENABLE                1  // the value of the enable flag
+#define REO_DISABLE               0  // the value of the disable flag
+
+// the types of minimization currently supported
+typedef enum {
+    REO_MINIMIZE_NODES,
+    REO_MINIMIZE_WIDTH,   // may not work for BDDs with complemented edges
+    REO_MINIMIZE_APL
+} reo_min_type;
+
+////////////////////////////////////////////////////////////////////////
+///                      DATA STRUCTURES                             ///
+////////////////////////////////////////////////////////////////////////
+
+typedef struct _reo_unit     reo_unit;    // the unit representing one DD node during reordering
+typedef struct _reo_plane    reo_plane;   // the set of nodes on one level
+typedef struct _reo_hash     reo_hash;    // the entry in the hash table
+typedef struct _reo_man      reo_man;     // the reordering manager
+typedef struct _reo_test     reo_test;    // 
+
+struct _reo_unit
+{
+    short       lev;             // the level of this node at the beginning
+    short       TopRef;          // the top level from which this node is refed (used to update BDD width)
+    short       TopRefNew;       // the new top level from which this node is refed (used to update BDD width)
+    short       n;               // the number of incoming edges (similar to ref count in the BDD)
+    int         Sign;            // the signature
+
+    reo_unit *  pE;              // the pointer to the "else" branch
+    reo_unit *  pT;              // the pointer to the "then" branch
+    reo_unit *  Next;            // the link to the next one in the list
+    double      Weight;          // the probability of traversing this node
+};
+
+struct _reo_plane
+{
+    int         fSifted;         // to mark the sifted variables
+    int         statsNodes;      // the number of nodes in the current level
+    int         statsWidth;      // the width on the current level
+    double      statsApl;        // the sum of node probabilities on this level
+    double      statsCost;       // the current cost is stored here
+    double      statsCostAbove;  // the current cost is stored here
+    double      statsCostBelow;  // the current cost is stored here
+
+    reo_unit *  pHead;           // the pointer to the beginning of the unit list
+};
+
+struct _reo_hash
+{
+    int         Sign;            // signature of the current cache operation
+    reo_unit *  Arg1;            // the first argument
+    reo_unit *  Arg2;            // the second argument
+    reo_unit *  Arg3;            // the third argument
+};
+
+struct _reo_man
+{
+    // these paramaters can be set by the API functions
+    int         fMinWidth;       // the flag to enable reordering for minimum width
+    int         fMinApl;         // the flag to enable reordering for minimum APL
+    int         fVerbose;        // the verbosity level
+    int         fVerify;         // the flag toggling verification
+    int         fRemapUp;        // the flag to enable remapping   
+    int         nIters;          // the number of interations of sifting to perform
+
+    // parameters given by the user when reordering is called
+    DdManager * dd;              // the CUDD BDD manager
+    int *       pOrder;          // the resulting variable order will be returned here
+
+    // derived parameters
+    int         fThisIsAdd;      // this flag is one if the function is the ADD 
+    int *       pSupp;           // the support of the given function
+    int         nSuppAlloc;      // the max allowed number of support variables
+    int         nSupp;           // the number of support variables
+    int *       pOrderInt;       // the array storing the internal variable permutation
+    double *    pVarCosts;       // other arrays
+    int *       pLevelOrder;     // other arrays
+    reo_unit ** pWidthCofs;      // temporary storage for cofactors used during reordering for width
+
+    // parameters related to cost
+    int         nNodesBeg;
+    int         nNodesCur;
+    int         nNodesEnd;
+    int         nWidthCur;
+    int         nWidthBeg;
+    int         nWidthEnd;
+    double      nAplCur;
+    double      nAplBeg;
+    double      nAplEnd;
+
+    // mapping of the function into planes and back
+    int *       pMapToPlanes;    // the mapping of var indexes into plane levels
+    int *       pMapToDdVarsOrig;// the mapping of plane levels into the original indexes
+    int *       pMapToDdVarsFinal;// the mapping of plane levels into the final indexes
+
+    // the planes table
+    reo_plane * pPlanes;
+    int         nPlanes;
+    reo_unit ** pTops;
+    int         nTops;
+    int         nTopsAlloc;
+
+    // the hash table
+    reo_hash *  HTable;           // the table itself
+    int         nTableSize;       // the size of the hash table
+    int         Signature;        // the signature counter
+
+    // the referenced node list
+    int         nNodesMaxAlloc;   // this parameters determins how much memory is allocated
+    DdNode **   pRefNodes;
+    int         nRefNodes;
+    int         nRefNodesAlloc;
+
+    // unit memory management
+    reo_unit *  pUnitFreeList;
+    reo_unit ** pMemChunks;
+    int         nMemChunks;
+    int         nMemChunksAlloc;
+    int         nUnitsUsed;
+
+    // statistic variables
+    int         HashSuccess;
+    int         HashFailure;
+    int         nSwaps;            // the number of swaps
+    int         nNISwaps;          // the number of swaps without interaction
+};
+
+// used to manipulate units
+#define Unit_Regular(u)     ((reo_unit *)((unsigned long)(u) & ~01))
+#define Unit_Not(u)         ((reo_unit *)((unsigned long)(u) ^ 01))
+#define Unit_NotCond(u,c)   ((reo_unit *)((unsigned long)(u) ^ (c)))
+#define Unit_IsConstant(u)  ((int)((u)->lev == REO_CONST_LEVEL))
+
+////////////////////////////////////////////////////////////////////////
+///                   FUNCTION DECLARATIONS                          ///
+////////////////////////////////////////////////////////////////////////
+
+// ======================= reoApi.c ========================================
+extern reo_man *  Extra_ReorderInit( int nDdVarsMax, int nNodesMax );
+extern void       Extra_ReorderQuit( reo_man * p );
+extern void       Extra_ReorderSetMinimizationType( reo_man * p, reo_min_type fMinType );
+extern void       Extra_ReorderSetRemapping( reo_man * p, int fRemapUp );
+extern void       Extra_ReorderSetIterations( reo_man * p, int nIters );
+extern void       Extra_ReorderSetVerbosity( reo_man * p, int fVerbose );
+extern void       Extra_ReorderSetVerification( reo_man * p, int fVerify );
+extern DdNode *   Extra_Reorder( reo_man * p, DdManager * dd, DdNode * Func, int * pOrder );
+extern void       Extra_ReorderArray( reo_man * p, DdManager * dd, DdNode * Funcs[], DdNode * FuncsRes[], int nFuncs, int * pOrder );
+// ======================= reoCore.c =======================================
+extern void       reoReorderArray( reo_man * p, DdManager * dd, DdNode * Funcs[], DdNode * FuncsRes[], int nFuncs, int * pOrder );
+extern void       reoResizeStructures( reo_man * p, int nDdVarsMax, int nNodesMax, int nFuncs );
+// ======================= reoProfile.c ======================================
+extern void       reoProfileNodesStart( reo_man * p );
+extern void       reoProfileAplStart( reo_man * p );
+extern void       reoProfileWidthStart( reo_man * p );
+extern void       reoProfileWidthStart2( reo_man * p );
+extern void       reoProfileAplPrint( reo_man * p );
+extern void       reoProfileNodesPrint( reo_man * p );
+extern void       reoProfileWidthPrint( reo_man * p );
+extern void       reoProfileWidthVerifyLevel( reo_plane * pPlane, int Level );
+// ======================= reoSift.c =======================================
+extern void       reoReorderSift( reo_man * p );
+// ======================= reoSwap.c =======================================
+extern double     reoReorderSwapAdjacentVars( reo_man * p, int Level, int fMovingUp );
+// ======================= reoTransfer.c ===================================
+extern reo_unit * reoTransferNodesToUnits_rec( reo_man * p, DdNode * F );
+extern DdNode *   reoTransferUnitsToNodes_rec( reo_man * p, reo_unit * pUnit );
+// ======================= reoUnits.c ======================================
+extern reo_unit * reoUnitsGetNextUnit(reo_man * p );
+extern void       reoUnitsRecycleUnit( reo_man * p, reo_unit * pUnit );
+extern void       reoUnitsRecycleUnitList( reo_man * p, reo_plane * pPlane );
+extern void       reoUnitsAddUnitToPlane( reo_plane * pPlane, reo_unit * pUnit );
+extern void       reoUnitsStopDispenser( reo_man * p );
+// ======================= reoTest.c =======================================
+extern void       Extra_ReorderTest( DdManager * dd, DdNode * Func );
+extern DdNode *   Extra_ReorderCudd( DdManager * dd, DdNode * aFunc, int pPermuteReo[] );
+extern int        Extra_bddReorderTest( DdManager * dd, DdNode * bF ); 
+extern int        Extra_addReorderTest( DdManager * dd, DdNode * aF ); 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+////////////////////////////////////////////////////////////////////////
+///                         END OF FILE                              ///
+////////////////////////////////////////////////////////////////////////
diff --git a/abc70930/src/bdd/reo/reoApi.c b/abc70930/src/bdd/reo/reoApi.c
new file mode 100644
index 00000000..e833dabd
--- /dev/null
+++ b/abc70930/src/bdd/reo/reoApi.c
@@ -0,0 +1,289 @@
+/**CFile****************************************************************
+
+  FileName    [reoApi.c]
+
+  PackageName [REO: A specialized DD reordering engine.]
+
+  Synopsis    [Implementation of API functions.]
+
+  Author      [Alan Mishchenko]
+  
+  Affiliation [UC Berkeley]
+
+  Date        [Ver. 1.0. Started - October 15, 2002.]
+
+  Revision    [$Id: reoApi.c,v 1.0 2002/15/10 03:00:00 alanmi Exp $]
+
+***********************************************************************/
+
+#include "reo.h"
+
+////////////////////////////////////////////////////////////////////////
+///                        DECLARATIONS                              ///
+////////////////////////////////////////////////////////////////////////
+
+////////////////////////////////////////////////////////////////////////
+///                    FUNCTION DEFINITIONS                          ///
+////////////////////////////////////////////////////////////////////////
+
+/**Function*************************************************************
+
+  Synopsis    [Initializes the reordering engine.]
+
+  Description [The first argument is the max number of variables in the
+  CUDD DD manager which will be used with the reordering engine 
+  (this number of should be the maximum of BDD and ZDD parts). 
+  The second argument is the maximum number of BDD nodes in the BDDs 
+  to be reordered. These limits are soft. Setting lower limits will later 
+  cause the reordering manager to resize internal data structures. 
+  However, setting the exact values will make reordering more efficient 
+  because resizing will be not necessary.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+reo_man * Extra_ReorderInit( int nDdVarsMax, int nNodesMax )
+{
+    reo_man * p;
+    // allocate and clean the data structure
+    p = ALLOC( reo_man, 1 );
+    memset( p, 0, sizeof(reo_man) );
+    // resize the manager to meet user's needs    
+    reoResizeStructures( p, nDdVarsMax, nNodesMax, 100 );
+    // set the defaults
+    p->fMinApl   = 0;
+    p->fMinWidth = 0;
+    p->fRemapUp  = 0;
+    p->fVerbose  = 0;
+    p->fVerify   = 0;
+    p->nIters    = 1;
+    return p;
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Disposes of the reordering engine.]
+
+  Description [Removes all memory associated with the reordering engine.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void Extra_ReorderQuit( reo_man * p )
+{
+    free( p->pTops );
+    free( p->pSupp );
+    free( p->pOrderInt );
+    free( p->pWidthCofs );
+    free( p->pMapToPlanes );
+    free( p->pMapToDdVarsOrig );
+    free( p->pMapToDdVarsFinal );
+    free( p->pPlanes );
+    free( p->pVarCosts );
+    free( p->pLevelOrder );
+    free( p->HTable );
+    free( p->pRefNodes );
+    reoUnitsStopDispenser( p );
+    free( p->pMemChunks );
+    free( p );
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Sets the type of DD minimizationl that will be performed.]
+
+  Description [Currently, three different types of minimization are supported.
+  It is possible to minimize the number of BDD nodes. This is a classical type
+  of minimization, which is attempting to reduce the total number of nodes in
+  the (shared) BDD of the given Boolean functions. It is also possible to 
+  minimize the BDD width, defined as the sum total of the number of cofactors 
+  on each level in the (shared) BDD (note that the number of cofactors on the 
+  given level may be larger than the number of nodes appearing on the given level).
+  It is also possible to minimize the average path length in the (shared) BDD 
+  defined as the sum of products, for all BDD paths from the top node to any 
+  terminal node, of the number of minterms on the path by the number of nodes 
+  on the path. The default reordering type is minimization for the number of 
+  BDD nodes. Calling this function with REO_MINIMIZE_WIDTH or REO_MINIMIZE_APL
+  as the second argument, changes the default minimization option for all the 
+  reorder calls performed afterwards.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void Extra_ReorderSetMinimizationType( reo_man * p, reo_min_type fMinType )
+{
+    if ( fMinType == REO_MINIMIZE_NODES ) 
+    {
+        p->fMinWidth = 0;
+        p->fMinApl   = 0;
+    }
+    else if ( fMinType == REO_MINIMIZE_WIDTH )
+    {
+        p->fMinWidth = 1;
+        p->fMinApl   = 0;
+    }
+    else if ( fMinType == REO_MINIMIZE_APL )
+    {
+        p->fMinWidth = 0;
+        p->fMinApl   = 1;
+    }
+    else 
+    {
+        assert( 0 );
+    }
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Sets the type of remapping performed by the engine.]
+
+  Description [The remapping refers to the way the resulting BDD
+  is expressed using the elementary variables of the CUDD BDD manager.
+  Currently, two types possibilities are supported: remapping and no
+  remapping. Remapping means that the function(s) after reordering
+  depend on the topmost variables in the manager. No remapping means 
+  that the function(s) after reordering depend on the same variables 
+  as before. Consider the following example. Suppose the initial four
+  variable function depends on variables 2,4,5, and 9 on the CUDD BDD
+  manager, which may be found anywhere in the current variable order.
+  If remapping is set, the function after ordering depends on the 
+  topmost variables in the manager, which may or may not be the same
+  as the variables 2,4,5, and 9. If no remapping is set, then the 
+  reordered function depend on the same variables 2,4,5, and 9, but
+  the meaning of each variale has changed according to the new ordering.
+  The resulting ordering is returned in the array "pOrder" filled out
+  by the reordering engine in the call to Extra_Reorder(). The default
+  is no remapping.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void Extra_ReorderSetRemapping( reo_man * p, int fRemapUp )
+{
+    p->fRemapUp = fRemapUp;
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Sets the number of iterations of sifting performed.]
+
+  Description [The default is one iteration. But a higher minimization
+  quality is desired, it is possible to set the number of iterations 
+  to any number larger than 1. Convergence is often reached after
+  several iterations, so typically it make no sense to set the number
+  of iterations higher than 3.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void Extra_ReorderSetIterations( reo_man * p, int nIters )
+{
+    p->nIters = nIters;
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Sets the verification mode.]
+
+  Description [Setting the level to 1 results in verifying the results
+  of variable reordering. Verification is performed by remapping the
+  resulting functions into the original variable order and comparing
+  them with the original functions given by the user. Enabling verification
+  typically leads to 20-30% increase in the total runtime of REO.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void Extra_ReorderSetVerification( reo_man * p, int fVerify )
+{
+    p->fVerify = fVerify;
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Sets the verbosity level.]
+
+  Description [Setting the level to 1 results in printing statistics
+  before and after the reordering.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void Extra_ReorderSetVerbosity( reo_man * p, int fVerbose )
+{
+    p->fVerbose = fVerbose;
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Performs reordering of the function.]
+
+  Description [Returns the DD minimized by variable reordering in the REO 
+  engine. Takes the CUDD decision diagram manager (dd) and the function (Func) 
+  represented as a BDD or ADD (MTBDD). If the variable array (pOrder) is not NULL, 
+  returns the resulting  variable permutation. The permutation is such that if the resulting 
+  function is permuted by Cudd_(add,bdd)Permute() using pOrder as the permutation 
+  array, the initial function (Func) results.
+  Several flag set by other interface functions specify reordering options: 
+  - Remappig can be set by Extra_ReorderSetRemapping(). Then the resulting DD after 
+  reordering is remapped into the topmost levels of the DD manager. Otherwise, 
+  the resulting DD after reordering is mapped using the same variables, on which it 
+  originally depended, only (possibly) permuted as a result of reordering.
+  - Minimization type can be set by Extra_ReorderSetMinimizationType(). Note
+  that when the BDD is minimized for the total width of the total APL, the number
+  BDD nodes can increase. The total width is defines as sum total of widths on each 
+  level. The width on one level is defined as the number of distinct BDD nodes 
+  pointed by the nodes situated above the given level.
+  - The number of iterations of sifting can be set by Extra_ReorderSetIterations().
+  The decision diagram returned by this procedure is not referenced.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+DdNode * Extra_Reorder( reo_man * p, DdManager * dd, DdNode * Func, int * pOrder )
+{
+    DdNode * FuncRes;
+    Extra_ReorderArray( p, dd, &Func, &FuncRes, 1, pOrder );
+    Cudd_Deref( FuncRes );
+    return FuncRes;
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Performs reordering of the array of functions.]
+
+  Description [The options are similar to the procedure Extra_Reorder(), except that
+  the user should also provide storage for the resulting DDs, which are returned 
+  referenced.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void Extra_ReorderArray( reo_man * p, DdManager * dd, DdNode * Funcs[], DdNode * FuncsRes[], int nFuncs, int * pOrder )
+{
+    reoReorderArray( p, dd, Funcs, FuncsRes, nFuncs, pOrder );
+}
+
+
+////////////////////////////////////////////////////////////////////////
+///                         END OF FILE                              ///
+////////////////////////////////////////////////////////////////////////
+
diff --git a/abc70930/src/bdd/reo/reoCore.c b/abc70930/src/bdd/reo/reoCore.c
new file mode 100644
index 00000000..3782631c
--- /dev/null
+++ b/abc70930/src/bdd/reo/reoCore.c
@@ -0,0 +1,438 @@
+/**CFile****************************************************************
+
+  FileName    [reoCore.c]
+
+  PackageName [REO: A specialized DD reordering engine.]
+
+  Synopsis    [Implementation of the core reordering procedure.]
+
+  Author      [Alan Mishchenko]
+  
+  Affiliation [UC Berkeley]
+
+  Date        [Ver. 1.0. Started - October 15, 2002.]
+
+  Revision    [$Id: reoCore.c,v 1.0 2002/15/10 03:00:00 alanmi Exp $]
+
+***********************************************************************/
+
+#include "reo.h"
+
+////////////////////////////////////////////////////////////////////////
+///                        DECLARATIONS                              ///
+////////////////////////////////////////////////////////////////////////
+
+#define CALLOC(type, num)  ((type *) calloc((long)(num), (long)sizeof(type)))
+
+static int  reoRecursiveDeref( reo_unit * pUnit );
+static int  reoCheckZeroRefs( reo_plane * pPlane );
+static int  reoCheckLevels( reo_man * p );
+
+double s_AplBefore;
+double s_AplAfter;
+
+////////////////////////////////////////////////////////////////////////
+///                    FUNCTION DEFINITIONS                          ///
+////////////////////////////////////////////////////////////////////////
+
+/**Function*************************************************************
+
+  Synopsis    []
+
+  Description []
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void reoReorderArray( reo_man * p, DdManager * dd, DdNode * Funcs[], DdNode * FuncsRes[], int nFuncs, int * pOrder )
+{
+    int Counter, i;
+
+    // set the initial parameters
+    p->dd     = dd;
+    p->pOrder = pOrder;
+    p->nTops  = nFuncs;
+    // get the initial number of nodes
+    p->nNodesBeg = Cudd_SharingSize( Funcs, nFuncs );     
+    // resize the internal data structures of the manager if necessary
+    reoResizeStructures( p, ddMax(dd->size,dd->sizeZ), p->nNodesBeg, nFuncs );
+    // compute the support
+    p->pSupp = Extra_VectorSupportArray( dd, Funcs, nFuncs, p->pSupp );
+    // get the number of support variables
+    p->nSupp = 0;
+    for ( i = 0; i < dd->size; i++ )
+        p->nSupp += p->pSupp[i];
+
+    // if it is the constant function, no need to reorder
+    if ( p->nSupp == 0 )
+    {
+        for ( i = 0; i < nFuncs; i++ )
+        {
+            FuncsRes[i] = Funcs[i]; Cudd_Ref( FuncsRes[i] );
+        }
+        return;
+    }
+
+    // create the internal variable maps
+    // go through variable levels in the manager
+    Counter = 0;
+    for ( i = 0; i < dd->size; i++ )
+        if ( p->pSupp[ dd->invperm[i] ] )
+        {
+            p->pMapToPlanes[ dd->invperm[i] ] = Counter;
+            p->pMapToDdVarsOrig[Counter]      = dd->invperm[i];
+            if ( !p->fRemapUp )
+                p->pMapToDdVarsFinal[Counter] = dd->invperm[i];
+            else
+                p->pMapToDdVarsFinal[Counter] = dd->invperm[Counter];
+            p->pOrderInt[Counter]        = Counter;
+            Counter++;
+        }
+
+    // set the initial parameters
+    p->nUnitsUsed = 0;
+    p->nNodesCur  = 0;
+    p->fThisIsAdd = 0;
+    p->Signature++;
+    // transfer the function from the CUDD package into REO"s internal data structure
+    for ( i = 0; i < nFuncs; i++ )
+        p->pTops[i] = reoTransferNodesToUnits_rec( p, Funcs[i] );
+    assert( p->nNodesBeg == p->nNodesCur );
+
+    if ( !p->fThisIsAdd && p->fMinWidth )
+    {
+        printf( "An important message from the REO reordering engine:\n" );
+        printf( "The BDD given to the engine for reordering contains complemented edges.\n" );
+        printf( "Currently, such BDDs cannot be reordered for the minimum width.\n" );
+        printf( "Therefore, minimization for the number of BDD nodes is performed.\n" );
+        fflush( stdout );
+        p->fMinApl   = 0;
+        p->fMinWidth = 0;
+    }
+
+    if ( p->fMinWidth )
+        reoProfileWidthStart(p);
+    else if ( p->fMinApl )
+        reoProfileAplStart(p);
+    else 
+        reoProfileNodesStart(p);
+
+    if ( p->fVerbose )
+    {
+        printf( "INITIAL: " );
+        if ( p->fMinWidth )
+            reoProfileWidthPrint(p);
+        else if ( p->fMinApl )
+            reoProfileAplPrint(p);
+        else
+            reoProfileNodesPrint(p);
+    }
+ 
+    ///////////////////////////////////////////////////////////////////
+    // performs the reordering
+    p->nSwaps   = 0;
+    p->nNISwaps = 0;
+    for ( i = 0; i < p->nIters; i++ )
+    {
+        reoReorderSift( p );
+        // print statistics after each iteration
+        if ( p->fVerbose )
+        {
+            printf( "ITER #%d: ", i+1 );
+            if ( p->fMinWidth )
+                reoProfileWidthPrint(p);
+            else if ( p->fMinApl )
+                reoProfileAplPrint(p);
+            else
+                reoProfileNodesPrint(p);
+        }
+        // if the cost function did not change, stop iterating
+        if ( p->fMinWidth )
+        {
+            p->nWidthEnd = p->nWidthCur;
+            assert( p->nWidthEnd <= p->nWidthBeg );
+            if ( p->nWidthEnd == p->nWidthBeg )
+                break;
+        }
+        else if ( p->fMinApl )
+        {
+            p->nAplEnd = p->nAplCur;
+            assert( p->nAplEnd <= p->nAplBeg );
+            if ( p->nAplEnd == p->nAplBeg )
+                break;
+        }
+        else
+        {
+            p->nNodesEnd = p->nNodesCur;
+            assert( p->nNodesEnd <= p->nNodesBeg );
+            if ( p->nNodesEnd == p->nNodesBeg )
+                break;
+        }
+    }
+    assert( reoCheckLevels( p ) );
+    ///////////////////////////////////////////////////////////////////
+
+s_AplBefore = p->nAplBeg;
+s_AplAfter  = p->nAplEnd;
+
+    // set the initial parameters
+    p->nRefNodes  = 0;
+    p->nNodesCur  = 0;
+    p->Signature++;
+    // transfer the BDDs from REO's internal data structure to CUDD
+    for ( i = 0; i < nFuncs; i++ )
+    {
+        FuncsRes[i] = reoTransferUnitsToNodes_rec( p, p->pTops[i] ); Cudd_Ref( FuncsRes[i] );
+    }
+    // undo the DDs referenced for storing in the cache
+    for ( i = 0; i < p->nRefNodes; i++ )
+        Cudd_RecursiveDeref( dd, p->pRefNodes[i] );
+    // verify zero refs of the terminal nodes
+    for ( i = 0; i < nFuncs; i++ )
+    {
+        assert( reoRecursiveDeref( p->pTops[i] ) );
+    }
+    assert( reoCheckZeroRefs( &(p->pPlanes[p->nSupp]) ) );
+
+    // prepare the variable map to return to the user
+    if ( p->pOrder )
+    {
+        // i is the current level in the planes data structure
+        // p->pOrderInt[i] is the original level in the planes data structure
+        // p->pMapToDdVarsOrig[i] is the variable, into which we remap when we construct the BDD from planes
+        // p->pMapToDdVarsOrig[ p->pOrderInt[i] ] is the original BDD variable corresponding to this level
+        // Therefore, p->pOrder[ p->pMapToDdVarsFinal[i] ] = p->pMapToDdVarsOrig[ p->pOrderInt[i] ]
+        // creates the permutation, which remaps the resulting BDD variable into the original BDD variable
+        for ( i = 0; i < p->nSupp; i++ )
+            p->pOrder[ p->pMapToDdVarsFinal[i] ] = p->pMapToDdVarsOrig[ p->pOrderInt[i] ]; 
+    }
+
+    if ( p->fVerify )
+    {
+        int fVerification;
+        DdNode * FuncRemapped;
+        int * pOrder;
+
+        if ( p->pOrder == NULL )
+        {
+            pOrder = ALLOC( int, p->nSupp );
+            for ( i = 0; i < p->nSupp; i++ )
+                pOrder[ p->pMapToDdVarsFinal[i] ] = p->pMapToDdVarsOrig[ p->pOrderInt[i] ]; 
+        }
+        else
+            pOrder = p->pOrder;
+
+        fVerification = 1;
+        for ( i = 0; i < nFuncs; i++ )
+        {
+            // verify the result
+            if ( p->fThisIsAdd )
+                FuncRemapped = Cudd_addPermute( dd, FuncsRes[i], pOrder );
+            else
+                FuncRemapped = Cudd_bddPermute( dd, FuncsRes[i], pOrder );
+            Cudd_Ref( FuncRemapped );
+
+            if ( FuncRemapped != Funcs[i] )
+            {
+                fVerification = 0;
+                printf( "REO: Internal verification has failed!\n" );
+                fflush( stdout );
+            }
+            Cudd_RecursiveDeref( dd, FuncRemapped );
+        }
+        if ( fVerification )
+            printf( "REO: Internal verification is okay!\n" );
+
+        if ( p->pOrder == NULL )
+            free( pOrder );
+    }
+
+    // recycle the data structure
+    for ( i = 0; i <= p->nSupp; i++ )
+        reoUnitsRecycleUnitList( p, p->pPlanes + i );
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Resizes the internal manager data structures.]
+
+  Description []
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void reoResizeStructures( reo_man * p, int nDdVarsMax, int nNodesMax, int nFuncs )
+{
+    // resize data structures depending on the number of variables in the DD manager
+    if ( p->nSuppAlloc == 0 )
+    {
+        p->pSupp             = ALLOC( int,        nDdVarsMax + 1 );
+        p->pOrderInt         = ALLOC( int,        nDdVarsMax + 1 );
+        p->pMapToPlanes      = ALLOC( int,        nDdVarsMax + 1 );
+        p->pMapToDdVarsOrig  = ALLOC( int,        nDdVarsMax + 1 );
+        p->pMapToDdVarsFinal = ALLOC( int,        nDdVarsMax + 1 );
+        p->pPlanes           = CALLOC( reo_plane, nDdVarsMax + 1 );
+        p->pVarCosts         = ALLOC( double,     nDdVarsMax + 1 );
+        p->pLevelOrder       = ALLOC( int,        nDdVarsMax + 1 );
+        p->nSuppAlloc        = nDdVarsMax + 1;
+    }
+    else if ( p->nSuppAlloc < nDdVarsMax )
+    {
+        free( p->pSupp );
+        free( p->pOrderInt );
+        free( p->pMapToPlanes );
+        free( p->pMapToDdVarsOrig );
+        free( p->pMapToDdVarsFinal );
+        free( p->pPlanes );
+        free( p->pVarCosts );
+        free( p->pLevelOrder );
+
+        p->pSupp             = ALLOC( int,        nDdVarsMax + 1 );
+        p->pOrderInt         = ALLOC( int,        nDdVarsMax + 1 );
+        p->pMapToPlanes      = ALLOC( int,        nDdVarsMax + 1 );
+        p->pMapToDdVarsOrig  = ALLOC( int,        nDdVarsMax + 1 );
+        p->pMapToDdVarsFinal = ALLOC( int,        nDdVarsMax + 1 );
+        p->pPlanes           = CALLOC( reo_plane, nDdVarsMax + 1 );
+        p->pVarCosts         = ALLOC( double,     nDdVarsMax + 1 );
+        p->pLevelOrder       = ALLOC( int,        nDdVarsMax + 1 );
+        p->nSuppAlloc        = nDdVarsMax + 1;
+    }
+
+    // resize the data structures depending on the number of nodes
+    if ( p->nRefNodesAlloc == 0 )
+    {
+        p->nNodesMaxAlloc  = nNodesMax;
+        p->nTableSize      = 3*nNodesMax + 1;
+        p->nRefNodesAlloc  = 3*nNodesMax + 1;
+        p->nMemChunksAlloc = (10*nNodesMax + 1)/REO_CHUNK_SIZE + 1;
+
+        p->HTable          = CALLOC( reo_hash,  p->nTableSize );
+        p->pRefNodes       = ALLOC( DdNode *,   p->nRefNodesAlloc );
+        p->pWidthCofs      = ALLOC( reo_unit *, p->nRefNodesAlloc );
+        p->pMemChunks      = ALLOC( reo_unit *, p->nMemChunksAlloc );
+    }
+    else if ( p->nNodesMaxAlloc < nNodesMax )
+    {
+        void * pTemp;
+        int nMemChunksAllocPrev = p->nMemChunksAlloc;
+
+        p->nNodesMaxAlloc  = nNodesMax;
+        p->nTableSize      = 3*nNodesMax + 1;
+        p->nRefNodesAlloc  = 3*nNodesMax + 1;
+        p->nMemChunksAlloc = (10*nNodesMax + 1)/REO_CHUNK_SIZE + 1;
+
+        free( p->HTable );
+        free( p->pRefNodes );
+        free( p->pWidthCofs );
+        p->HTable          = CALLOC( reo_hash,    p->nTableSize );
+        p->pRefNodes       = ALLOC(  DdNode *,    p->nRefNodesAlloc );
+        p->pWidthCofs      = ALLOC(  reo_unit *,  p->nRefNodesAlloc );
+        // p->pMemChunks should be reallocated because it contains pointers currently in use
+        pTemp              = ALLOC(  reo_unit *,  p->nMemChunksAlloc );
+        memmove( pTemp, p->pMemChunks, sizeof(reo_unit *) * nMemChunksAllocPrev );
+        free( p->pMemChunks );
+        p->pMemChunks      = pTemp;
+    }
+
+    // resize the data structures depending on the number of functions
+    if ( p->nTopsAlloc == 0 )
+    {
+        p->pTops      = ALLOC( reo_unit *, nFuncs );
+        p->nTopsAlloc = nFuncs;
+    }
+    else if ( p->nTopsAlloc < nFuncs )
+    {
+        free( p->pTops );
+        p->pTops      = ALLOC( reo_unit *, nFuncs );
+        p->nTopsAlloc = nFuncs;
+    }
+}
+
+
+/**Function*************************************************************
+
+  Synopsis    [Dereferences units the data structure after reordering.]
+
+  Description [This function is only useful for debugging.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+int reoRecursiveDeref( reo_unit * pUnit )
+{
+    reo_unit * pUnitR;
+    pUnitR = Unit_Regular(pUnit);
+    pUnitR->n--;
+    if ( Unit_IsConstant(pUnitR) )
+        return 1;
+    if ( pUnitR->n == 0 )
+    {
+        reoRecursiveDeref( pUnitR->pE );
+        reoRecursiveDeref( pUnitR->pT );
+    }
+    return 1;
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Checks the zero references for the given plane.]
+
+  Description [This function is only useful for debugging.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+int reoCheckZeroRefs( reo_plane * pPlane )
+{
+    reo_unit * pUnit;
+    for ( pUnit = pPlane->pHead; pUnit; pUnit = pUnit->Next )
+    {
+        if ( pUnit->n != 0 )
+        {
+            assert( 0 );
+        }
+    }
+    return 1;
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Checks the zero references for the given plane.]
+
+  Description [This function is only useful for debugging.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+int reoCheckLevels( reo_man * p )
+{
+    reo_unit * pUnit;
+    int i;
+
+    for ( i = 0; i < p->nSupp; i++ )
+    {
+        // there are some nodes left on each level
+        assert( p->pPlanes[i].statsNodes );
+        for ( pUnit = p->pPlanes[i].pHead; pUnit; pUnit = pUnit->Next )
+        {
+            // the level is properly set
+            assert( pUnit->lev == i );
+        }
+    }
+    return 1;
+}
+
+////////////////////////////////////////////////////////////////////////
+///                         END OF FILE                              ///
+////////////////////////////////////////////////////////////////////////
+
diff --git a/abc70930/src/bdd/reo/reoProfile.c b/abc70930/src/bdd/reo/reoProfile.c
new file mode 100644
index 00000000..84a0bc19
--- /dev/null
+++ b/abc70930/src/bdd/reo/reoProfile.c
@@ -0,0 +1,365 @@
+/**CFile****************************************************************
+
+  FileName    [reoProfile.c]
+
+  PackageName [REO: A specialized DD reordering engine.]
+
+  Synopsis    [Procudures that compute variables profiles (nodes, width, APL).]
+
+  Author      [Alan Mishchenko]
+  
+  Affiliation [UC Berkeley]
+
+  Date        [Ver. 1.0. Started - October 15, 2002.]
+
+  Revision    [$Id: reoProfile.c,v 1.0 2002/15/10 03:00:00 alanmi Exp $]
+
+***********************************************************************/
+
+#include "reo.h"
+
+////////////////////////////////////////////////////////////////////////
+///                        DECLARATIONS                              ///
+////////////////////////////////////////////////////////////////////////
+
+
+////////////////////////////////////////////////////////////////////////
+///                    FUNCTION DEFINITIONS                          ///
+////////////////////////////////////////////////////////////////////////
+
+
+/**Function********************************************************************
+
+  Synopsis    [Start the profile for the BDD nodes.]
+
+  Description [TopRef is the first level, on this the given node counts towards 
+  the width of the BDDs. (In other words, it is the level of the referencing node plus 1.)]
+
+  SideEffects []
+
+  SeeAlso     []
+
+******************************************************************************/
+void reoProfileNodesStart( reo_man * p )
+{
+    int Total, i;
+    Total = 0;
+    for ( i = 0; i <= p->nSupp; i++ )
+    {
+        p->pPlanes[i].statsCost = p->pPlanes[i].statsNodes;
+        Total += p->pPlanes[i].statsNodes;
+    }
+    assert( Total == p->nNodesCur );
+    p->nNodesBeg = p->nNodesCur;
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Start the profile for the APL.]
+
+  Description [Computes the total path length. The path length is normalized
+  by dividing it by 2^|supp(f)|. To get the "real" APL, multiply by 2^|supp(f)|.
+  This procedure assumes that Weight field of all nodes has been set to 0.0 
+  before the call, except for the weight of the topmost node, which is set to 1.0 
+  (1.0 is the probability of traversing the topmost node). This procedure 
+  assigns the edge weights. Because of the equal probability of selecting 0 and 1 
+  assignment at a node, the edge weights are the same for the node. 
+  Instead of storing them, we store the weight of the node, which is the probability 
+  of traversing the node (pUnit->Weight) during the top down evalation of the BDD. ]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void reoProfileAplStart( reo_man * p )
+{
+    reo_unit * pER, * pTR;
+    reo_unit * pUnit;
+    double Res, Half;
+    int i;
+
+    // clean the weights of all nodes
+    for ( i = 0; i < p->nSupp; i++ )
+        for ( pUnit = p->pPlanes[i].pHead; pUnit; pUnit = pUnit->Next )
+            pUnit->Weight = 0.0;
+    // to assign the node weights (the probability of visiting each node)
+    // we visit the node after visiting its predecessors
+
+    // set the probability of visits to the top nodes
+    for ( i = 0; i < p->nTops; i++ )
+        Unit_Regular(p->pTops[i])->Weight += 1.0;
+
+    // to compute the path length (the sum of products of edge weight by edge length)
+    // we visit the nodes in any order (the above order will do)
+    Res = 0.0;
+    for ( i = 0; i < p->nSupp; i++ )
+    {
+        p->pPlanes[i].statsCost = 0.0;
+        for ( pUnit = p->pPlanes[i].pHead; pUnit; pUnit = pUnit->Next )
+        {
+            pER  = Unit_Regular(pUnit->pE);
+            pTR  = Unit_Regular(pUnit->pT);
+            Half = 0.5 * pUnit->Weight;
+            pER->Weight += Half;
+            pTR->Weight += Half;
+            // add to the path length
+            p->pPlanes[i].statsCost += pUnit->Weight;
+        }
+        Res += p->pPlanes[i].statsCost;
+    }
+    p->pPlanes[p->nSupp].statsCost = 0.0;
+    p->nAplBeg = p->nAplCur = Res;
+}
+
+/**Function********************************************************************
+
+  Synopsis    [Start the profile for the BDD width. Complexity of the algorithm is O(N + n).]
+
+  Description [TopRef is the first level, on which the given node counts towards 
+  the width of the BDDs. (In other words, it is the level of the referencing node plus 1.)]
+
+  SideEffects []
+
+  SeeAlso     []
+
+******************************************************************************/
+void reoProfileWidthStart( reo_man * p )
+{
+    reo_unit * pUnit;
+    int * pWidthStart;
+    int * pWidthStop;
+    int v;
+
+    // allocate and clean the storage for starting and stopping levels
+    pWidthStart = ALLOC( int, p->nSupp + 1 );
+    pWidthStop  = ALLOC( int, p->nSupp + 1 );
+    memset( pWidthStart, 0, sizeof(int) * (p->nSupp + 1) );
+    memset( pWidthStop, 0, sizeof(int) * (p->nSupp + 1) );
+
+    // go through the non-constant nodes and set the topmost level of their cofactors
+    for ( v = 0; v <= p->nSupp; v++ )
+    for ( pUnit = p->pPlanes[v].pHead; pUnit; pUnit = pUnit->Next )
+    {
+        pUnit->TopRef = REO_TOPREF_UNDEF;
+        pUnit->Sign   = 0;
+    }
+
+    // add the topmost level of the width profile
+    for ( v = 0; v < p->nTops; v++ )
+    {
+        pUnit = Unit_Regular(p->pTops[v]);
+        if ( pUnit->TopRef == REO_TOPREF_UNDEF )
+        {
+            // set the starting level
+            pUnit->TopRef = 0;
+            pWidthStart[pUnit->TopRef]++;
+            // set the stopping level
+            if ( pUnit->lev != REO_CONST_LEVEL )
+                pWidthStop[pUnit->lev+1]++;
+        }
+    }
+
+    for ( v = 0; v < p->nSupp; v++ )
+    for ( pUnit = p->pPlanes[v].pHead; pUnit; pUnit = pUnit->Next )
+    {
+        if ( pUnit->pE->TopRef == REO_TOPREF_UNDEF )
+        {
+            // set the starting level
+            pUnit->pE->TopRef = pUnit->lev + 1;
+            pWidthStart[pUnit->pE->TopRef]++;
+            // set the stopping level
+            if ( pUnit->pE->lev != REO_CONST_LEVEL )
+                pWidthStop[pUnit->pE->lev+1]++;
+        }
+        if ( pUnit->pT->TopRef == REO_TOPREF_UNDEF )
+        {
+            // set the starting level
+            pUnit->pT->TopRef = pUnit->lev + 1;
+            pWidthStart[pUnit->pT->TopRef]++;
+            // set the stopping level
+            if ( pUnit->pT->lev != REO_CONST_LEVEL )
+                pWidthStop[pUnit->pT->lev+1]++;
+        }
+    }
+
+    // verify the top reference
+    for ( v = 0; v < p->nSupp; v++ )
+        reoProfileWidthVerifyLevel( p->pPlanes + v, v );
+
+    // derive the profile
+    p->nWidthCur = 0;
+    for ( v = 0; v <= p->nSupp; v++ )
+    {
+        if ( v == 0 )
+            p->pPlanes[v].statsWidth = pWidthStart[v] - pWidthStop[v];
+        else
+            p->pPlanes[v].statsWidth = p->pPlanes[v-1].statsWidth + pWidthStart[v] - pWidthStop[v];
+        p->pPlanes[v].statsCost = p->pPlanes[v].statsWidth;
+        p->nWidthCur += p->pPlanes[v].statsWidth;
+//        printf( "Level %2d: Width = %5d. Correct = %d.\n", v, Temp, p->pPlanes[v].statsWidth );
+    }
+    p->nWidthBeg = p->nWidthCur;
+    free( pWidthStart );
+    free( pWidthStop );
+}
+
+/**Function********************************************************************
+
+  Synopsis    [Start the profile for the BDD width. Complexity of the algorithm is O(N * n).]
+
+  Description [TopRef is the first level, on which the given node counts towards 
+  the width of the BDDs. (In other words, it is the level of the referencing node plus 1.)]
+
+  SideEffects []
+
+  SeeAlso     []
+
+******************************************************************************/
+void reoProfileWidthStart2( reo_man * p )
+{
+    reo_unit * pUnit;
+    int i, v;
+
+    // clean the profile
+    for ( i = 0; i <= p->nSupp; i++ )
+        p->pPlanes[i].statsWidth = 0;
+    
+    // clean the node structures
+    for ( v = 0; v <= p->nSupp; v++ )
+    for ( pUnit = p->pPlanes[v].pHead; pUnit; pUnit = pUnit->Next )
+    {
+        pUnit->TopRef = REO_TOPREF_UNDEF;
+        pUnit->Sign   = 0;
+    }
+
+    // set the topref to the topmost nodes
+    for ( i = 0; i < p->nTops; i++ )
+        Unit_Regular(p->pTops[i])->TopRef = 0;
+
+    // go through the non-constant nodes and set the topmost level of their cofactors
+    for ( i = 0; i < p->nSupp; i++ )
+        for ( pUnit = p->pPlanes[i].pHead; pUnit; pUnit = pUnit->Next )
+        {
+            if ( pUnit->pE->TopRef > i+1 )
+                 pUnit->pE->TopRef = i+1;
+            if ( pUnit->pT->TopRef > i+1 )
+                 pUnit->pT->TopRef = i+1;
+        }
+
+    // verify the top reference
+    for ( i = 0; i < p->nSupp; i++ )
+        reoProfileWidthVerifyLevel( p->pPlanes + i, i );
+
+    // compute the profile for the internal nodes
+    for ( i = 0; i < p->nSupp; i++ )
+        for ( pUnit = p->pPlanes[i].pHead; pUnit; pUnit = pUnit->Next )
+            for ( v = pUnit->TopRef; v <= pUnit->lev; v++ )
+                p->pPlanes[v].statsWidth++;
+
+    // compute the profile for the constant nodes
+    for ( pUnit = p->pPlanes[p->nSupp].pHead; pUnit; pUnit = pUnit->Next )
+        for ( v = pUnit->TopRef; v <= p->nSupp; v++ )
+            p->pPlanes[v].statsWidth++;
+
+    // get the width cost
+    p->nWidthCur = 0;
+    for ( i = 0; i <= p->nSupp; i++ )
+    {
+        p->pPlanes[i].statsCost = p->pPlanes[i].statsWidth;
+        p->nWidthCur           += p->pPlanes[i].statsWidth;
+    }
+    p->nWidthBeg = p->nWidthCur;
+}
+
+/**Function********************************************************************
+
+  Synopsis    []
+
+  Description []
+
+  SideEffects []
+
+  SeeAlso     []
+
+******************************************************************************/
+void reoProfileNodesPrint( reo_man * p )
+{
+    printf( "NODES: Total = %6d. Average = %6.2f.\n", p->nNodesCur, p->nNodesCur / (float)p->nSupp );
+}
+
+/**Function********************************************************************
+
+  Synopsis    []
+
+  Description []
+
+  SideEffects []
+
+  SeeAlso     []
+
+******************************************************************************/
+void reoProfileAplPrint( reo_man * p )
+{
+    printf( "APL: Total = %8.2f. Average =%6.2f.\n", p->nAplCur, p->nAplCur / (float)p->nSupp );
+}
+
+/**Function********************************************************************
+
+  Synopsis    []
+
+  Description []
+
+  SideEffects []
+
+  SeeAlso     []
+
+******************************************************************************/
+void reoProfileWidthPrint( reo_man * p )
+{
+    int WidthMax;
+    int TotalWidth;
+    int i;
+
+    WidthMax   = 0;
+    TotalWidth = 0;
+    for ( i = 0; i <= p->nSupp; i++ )
+    {
+//        printf( "Level = %2d. Width = %3d.\n", i, p->pProfile[i] );
+        if ( WidthMax < p->pPlanes[i].statsWidth )
+             WidthMax = p->pPlanes[i].statsWidth;
+        TotalWidth += p->pPlanes[i].statsWidth;
+    }
+    assert( p->nWidthCur == TotalWidth );
+    printf( "WIDTH:  " );
+    printf( "Maximum = %5d.  ", WidthMax );
+    printf( "Total = %7d.  ", p->nWidthCur );
+    printf( "Average = %6.2f.\n", TotalWidth / (float)p->nSupp );
+}
+
+/**Function********************************************************************
+
+  Synopsis    []
+
+  Description []
+
+  SideEffects []
+
+  SeeAlso     []
+
+******************************************************************************/
+void reoProfileWidthVerifyLevel( reo_plane * pPlane, int Level )
+{
+    reo_unit * pUnit;
+    for ( pUnit = pPlane->pHead; pUnit; pUnit = pUnit->Next )
+    {
+        assert( pUnit->TopRef     <= Level );
+        assert( pUnit->pE->TopRef <= Level + 1 );
+        assert( pUnit->pT->TopRef <= Level + 1 );
+    }
+}
+
+////////////////////////////////////////////////////////////////////////
+///                         END OF FILE                              ///
+////////////////////////////////////////////////////////////////////////
+
diff --git a/abc70930/src/bdd/reo/reoSift.c b/abc70930/src/bdd/reo/reoSift.c
new file mode 100644
index 00000000..93d82f08
--- /dev/null
+++ b/abc70930/src/bdd/reo/reoSift.c
@@ -0,0 +1,341 @@
+/**CFile****************************************************************
+
+  FileName    [reoSift.c]
+
+  PackageName [REO: A specialized DD reordering engine.]
+
+  Synopsis    [Implementation of the sifting algorihtm.]
+
+  Author      [Alan Mishchenko]
+  
+  Affiliation [UC Berkeley]
+
+  Date        [Ver. 1.0. Started - October 15, 2002.]
+
+  Revision    [$Id: reoSift.c,v 1.0 2002/15/10 03:00:00 alanmi Exp $]
+
+***********************************************************************/
+
+#include "reo.h"
+
+////////////////////////////////////////////////////////////////////////
+///                        DECLARATIONS                              ///
+////////////////////////////////////////////////////////////////////////
+
+////////////////////////////////////////////////////////////////////////
+///                    FUNCTION DEFINITIONS                          ///
+////////////////////////////////////////////////////////////////////////
+
+/**Function*************************************************************
+
+  Synopsis    [Implements the variable sifting algorithm.]
+
+  Description [Performs a sequence of adjacent variable swaps known as "sifting".
+  Uses the cost functions determined by the flag.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void reoReorderSift( reo_man * p )
+{
+    double CostCurrent;  // the cost of the current permutation
+    double CostLimit;    // the maximum increase in cost that can be tolerated
+    double CostBest;     // the best cost
+    int BestQ;           // the best position
+    int VarCurrent;      // the current variable to move   
+    int q;               // denotes the current position of the variable
+    int c;               // performs the loops over variables until all of them are sifted
+    int v;               // used for other purposes
+
+    assert( p->nSupp > 0 );
+
+    // set the current cost depending on the minimization criteria
+    if ( p->fMinWidth )
+        CostCurrent = p->nWidthCur;
+    else if ( p->fMinApl )
+        CostCurrent = p->nAplCur;
+    else
+        CostCurrent = p->nNodesCur;
+
+    // find the upper bound on tbe cost growth
+    CostLimit = 1 + (int)(REO_REORDER_LIMIT * CostCurrent);
+
+    // perform sifting for each of p->nSupp variables
+    for ( c = 0; c < p->nSupp; c++ )
+    {
+        // select the current variable to be the one with the largest number of nodes that is not sifted yet
+        VarCurrent = -1;
+        CostBest   = -1.0;
+        for ( v = 0; v < p->nSupp; v++ )
+        {
+            p->pVarCosts[v] = REO_HIGH_VALUE;
+            if ( !p->pPlanes[v].fSifted )
+            {
+//                VarCurrent = v;
+//                if ( CostBest < p->pPlanes[v].statsCost )
+                if ( CostBest < p->pPlanes[v].statsNodes )
+                {
+//                    CostBest   = p->pPlanes[v].statsCost;
+                    CostBest   = p->pPlanes[v].statsNodes;
+                    VarCurrent = v;
+                }
+
+            }
+        }
+        assert( VarCurrent != -1 );
+        // mark this variable as sifted
+        p->pPlanes[VarCurrent].fSifted = 1;
+
+        // set the current value
+        p->pVarCosts[VarCurrent] = CostCurrent;
+
+        // set the best cost
+        CostBest = CostCurrent;
+        BestQ    = VarCurrent; 
+
+        // determine which way to move the variable first (up or down)
+        // the rationale is that if we move the shorter way first
+        // it is more likely that the best position will be found on the longer way
+        // and the reverse movement (to take the best position) will be faster
+        if ( VarCurrent < p->nSupp/2 ) // move up first, then down
+        {
+            // set the total cost on all levels above the current level
+            p->pPlanes[0].statsCostAbove = 0;
+            for ( v = 1; v <= VarCurrent; v++ )
+                p->pPlanes[v].statsCostAbove = p->pPlanes[v-1].statsCostAbove + p->pPlanes[v-1].statsCost;
+            // set the total cost on all levels below the current level
+            p->pPlanes[p->nSupp].statsCostBelow = 0;
+            for ( v = p->nSupp - 1; v >= VarCurrent; v-- )
+                p->pPlanes[v].statsCostBelow = p->pPlanes[v+1].statsCostBelow + p->pPlanes[v+1].statsCost;
+
+            assert( CostCurrent == p->pPlanes[VarCurrent].statsCostAbove + 
+                                    p->pPlanes[VarCurrent].statsCost +
+                                    p->pPlanes[VarCurrent].statsCostBelow );
+
+            // move up
+            for ( q = VarCurrent-1; q >= 0; q-- )
+            {
+                CostCurrent -= reoReorderSwapAdjacentVars( p, q, 1 );
+                // now q points to the position of this var in the order
+                p->pVarCosts[q] = CostCurrent;
+                // update the lower bound (assuming that for level q+1 it is set correctly)
+                p->pPlanes[q].statsCostBelow = p->pPlanes[q+1].statsCostBelow + p->pPlanes[q+1].statsCost;
+                // check the upper bound
+                if ( CostCurrent >= CostLimit )
+                    break;
+                // check the lower bound
+                if ( p->pPlanes[q].statsCostBelow + (REO_QUAL_PAR-1)*p->pPlanes[q].statsCostAbove/REO_QUAL_PAR >= CostBest )
+                    break;
+                // update the best cost
+                if ( CostBest > CostCurrent )
+                {
+                    CostBest = CostCurrent;
+                    BestQ    = q;
+                    // adjust node limit
+                    CostLimit = ddMin( CostLimit, 1 + (int)(REO_REORDER_LIMIT * CostCurrent) );
+                }
+
+                // when we are reordering for width or APL, it may happen that
+                // the number of nodes has grown above certain limit,
+                // in which case we have to resize the data structures
+                if ( p->fMinWidth || p->fMinApl )
+                {
+                    if ( p->nNodesCur >= 2 * p->nNodesMaxAlloc )
+                    {
+//                        printf( "Resizing data structures. Old size = %6d. New size = %6d.\n",  p->nNodesMaxAlloc, p->nNodesCur );
+                        reoResizeStructures( p, 0, p->nNodesCur, 0 );
+                    }
+                }
+            }
+            // fix the plane index
+            if ( q == -1 )
+                q++;
+            // now p points to the position of this var in the order
+
+            // move down
+            for ( ; q < p->nSupp-1; )
+            {
+                CostCurrent -= reoReorderSwapAdjacentVars( p, q, 0 );
+                q++;    // change q to point to the position of this var in the order
+                // sanity check: the number of nodes on the back pass should be the same
+                if ( p->pVarCosts[q] != REO_HIGH_VALUE && fabs( p->pVarCosts[q] - CostCurrent ) > REO_COST_EPSILON )
+                    printf("reoReorderSift(): Error! On the backward move, the costs are different.\n");
+                p->pVarCosts[q] = CostCurrent;
+                // update the lower bound (assuming that for level q-1 it is set correctly)
+                p->pPlanes[q].statsCostAbove = p->pPlanes[q-1].statsCostAbove + p->pPlanes[q-1].statsCost;
+                // check the bounds only if the variable already reached its previous position
+                if ( q >= BestQ )
+                {
+                    // check the upper bound
+                    if ( CostCurrent >= CostLimit )
+                        break;
+                    // check the lower bound
+                    if ( p->pPlanes[q].statsCostAbove + (REO_QUAL_PAR-1)*p->pPlanes[q].statsCostBelow/REO_QUAL_PAR >= CostBest )
+                        break;
+                }
+                // update the best cost
+                if ( CostBest >= CostCurrent )
+                {
+                    CostBest = CostCurrent;
+                    BestQ    = q;
+                    // adjust node limit
+                    CostLimit = ddMin( CostLimit, 1 + (int)(REO_REORDER_LIMIT * CostCurrent) );
+                }
+
+                // when we are reordering for width or APL, it may happen that
+                // the number of nodes has grown above certain limit,
+                // in which case we have to resize the data structures
+                if ( p->fMinWidth || p->fMinApl )
+                {
+                    if ( p->nNodesCur >= 2 * p->nNodesMaxAlloc )
+                    {
+//                        printf( "Resizing data structures. Old size = %6d. New size = %6d.\n",  p->nNodesMaxAlloc, p->nNodesCur );
+                        reoResizeStructures( p, 0, p->nNodesCur, 0 );
+                    }
+                }
+            }
+            // move the variable up from the given position (q) to the best position (BestQ)
+            assert( q >= BestQ );
+            for ( ; q > BestQ; q-- )
+            {
+                CostCurrent -= reoReorderSwapAdjacentVars( p, q-1, 1 );
+                // sanity check: the number of nodes on the back pass should be the same
+                if ( fabs( p->pVarCosts[q-1] - CostCurrent ) > REO_COST_EPSILON )
+                {
+                    printf("reoReorderSift():  Error! On the return move, the costs are different.\n" );
+                    fflush(stdout);
+                }
+            }
+        }
+        else // move down first, then up
+        {
+            // set the current number of nodes on all levels above the given level
+            p->pPlanes[0].statsCostAbove = 0;
+            for ( v = 1; v <= VarCurrent; v++ )
+                p->pPlanes[v].statsCostAbove = p->pPlanes[v-1].statsCostAbove + p->pPlanes[v-1].statsCost;
+            // set the current number of nodes on all levels below the given level
+            p->pPlanes[p->nSupp].statsCostBelow = 0;
+            for ( v = p->nSupp - 1; v >= VarCurrent; v-- )
+                p->pPlanes[v].statsCostBelow = p->pPlanes[v+1].statsCostBelow + p->pPlanes[v+1].statsCost;
+            
+            assert( CostCurrent == p->pPlanes[VarCurrent].statsCostAbove + 
+                                    p->pPlanes[VarCurrent].statsCost +
+                                    p->pPlanes[VarCurrent].statsCostBelow );
+
+            // move down
+            for ( q = VarCurrent; q < p->nSupp-1; )
+            {
+                CostCurrent -= reoReorderSwapAdjacentVars( p, q, 0 );
+                q++;    // change q to point to the position of this var in the order
+                p->pVarCosts[q] = CostCurrent;
+                // update the lower bound (assuming that for level q-1 it is set correctly)
+                p->pPlanes[q].statsCostAbove = p->pPlanes[q-1].statsCostAbove + p->pPlanes[q-1].statsCost;
+                // check the upper bound
+                if ( CostCurrent >= CostLimit )
+                    break;
+                // check the lower bound
+                if ( p->pPlanes[q].statsCostAbove + (REO_QUAL_PAR-1)*p->pPlanes[q].statsCostBelow/REO_QUAL_PAR >= CostBest )
+                    break;
+                // update the best cost
+                if ( CostBest > CostCurrent )
+                {
+                    CostBest = CostCurrent;
+                    BestQ    = q;
+                    // adjust node limit
+                    CostLimit = ddMin( CostLimit, 1 + (int)(REO_REORDER_LIMIT * CostCurrent) );
+                }
+
+                // when we are reordering for width or APL, it may happen that
+                // the number of nodes has grown above certain limit,
+                // in which case we have to resize the data structures
+                if ( p->fMinWidth || p->fMinApl )
+                {
+                    if ( p->nNodesCur >= 2 * p->nNodesMaxAlloc )
+                    {
+//                        printf( "Resizing data structures. Old size = %6d. New size = %6d.\n",  p->nNodesMaxAlloc, p->nNodesCur );
+                        reoResizeStructures( p, 0, p->nNodesCur, 0 );
+                    }
+                }
+            }
+
+            // move up
+            for ( --q; q >= 0; q-- )
+            {
+                CostCurrent -= reoReorderSwapAdjacentVars( p, q, 1 );
+                // now q points to the position of this var in the order
+                // sanity check: the number of nodes on the back pass should be the same
+                if ( p->pVarCosts[q] != REO_HIGH_VALUE && fabs( p->pVarCosts[q] - CostCurrent ) > REO_COST_EPSILON )
+                    printf("reoReorderSift(): Error! On the backward move, the costs are different.\n");
+                p->pVarCosts[q] = CostCurrent;
+                // update the lower bound (assuming that for level q+1 it is set correctly)
+                p->pPlanes[q].statsCostBelow = p->pPlanes[q+1].statsCostBelow + p->pPlanes[q+1].statsCost;
+                // check the bounds only if the variable already reached its previous position
+                if ( q <= BestQ )
+                {
+                    // check the upper bound
+                    if ( CostCurrent >= CostLimit )
+                        break;
+                    // check the lower bound
+                    if ( p->pPlanes[q].statsCostBelow + (REO_QUAL_PAR-1)*p->pPlanes[q].statsCostAbove/REO_QUAL_PAR >= CostBest )
+                        break;
+                }
+                // update the best cost
+                if ( CostBest >= CostCurrent )
+                {
+                    CostBest = CostCurrent;
+                    BestQ    = q;
+                    // adjust node limit
+                    CostLimit = ddMin( CostLimit, 1 + (int)(REO_REORDER_LIMIT * CostCurrent) );
+                }
+
+                // when we are reordering for width or APL, it may happen that
+                // the number of nodes has grown above certain limit,
+                // in which case we have to resize the data structures
+                if ( p->fMinWidth || p->fMinApl )
+                {
+                    if ( p->nNodesCur >= 2 * p->nNodesMaxAlloc )
+                    {
+//                        printf( "Resizing data structures. Old size = %6d. New size = %6d.\n",  p->nNodesMaxAlloc, p->nNodesCur );
+                        reoResizeStructures( p, 0, p->nNodesCur, 0 );
+                    }
+                }
+            }
+            // fix the plane index
+            if ( q == -1 )
+                q++;
+            // now q points to the position of this var in the order
+            // move the variable down from the given position (q) to the best position (BestQ)
+            assert( q <= BestQ );
+            for ( ; q < BestQ; q++ )
+            {
+                CostCurrent -= reoReorderSwapAdjacentVars( p, q, 0 );
+                // sanity check: the number of nodes on the back pass should be the same
+                if ( fabs( p->pVarCosts[q+1] - CostCurrent ) > REO_COST_EPSILON )
+                {
+                    printf("reoReorderSift(): Error! On the return move, the costs are different.\n" );
+                    fflush(stdout);
+                }
+            }
+        }
+        assert( fabs( CostBest - CostCurrent ) < REO_COST_EPSILON );
+
+        // update the cost 
+        if ( p->fMinWidth )
+            p->nWidthCur = (int)CostBest;
+        else if ( p->fMinApl )
+            p->nAplCur = CostCurrent;
+        else
+            p->nNodesCur = (int)CostBest;
+    }
+
+    // remove the sifted attributes if any
+    for ( v = 0; v < p->nSupp; v++ )
+        p->pPlanes[v].fSifted = 0;
+}
+
+////////////////////////////////////////////////////////////////////////
+///                         END OF FILE                              ///
+////////////////////////////////////////////////////////////////////////
+
diff --git a/abc70930/src/bdd/reo/reoSwap.c b/abc70930/src/bdd/reo/reoSwap.c
new file mode 100644
index 00000000..4afa650c
--- /dev/null
+++ b/abc70930/src/bdd/reo/reoSwap.c
@@ -0,0 +1,898 @@
+/**CFile****************************************************************
+
+  FileName    [reoSwap.c]
+
+  PackageName [REO: A specialized DD reordering engine.]
+
+  Synopsis    [Implementation of the two-variable swap.]
+
+  Author      [Alan Mishchenko]
+  
+  Affiliation [UC Berkeley]
+
+  Date        [Ver. 1.0. Started - October 15, 2002.]
+
+  Revision    [$Id: reoSwap.c,v 1.0 2002/15/10 03:00:00 alanmi Exp $]
+
+***********************************************************************/
+
+#include "reo.h"
+
+////////////////////////////////////////////////////////////////////////
+///                        DECLARATIONS                              ///
+////////////////////////////////////////////////////////////////////////
+
+#define AddToLinkedList( ppList, pLink )   (((pLink)->Next = *(ppList)), (*(ppList) = (pLink)))
+
+////////////////////////////////////////////////////////////////////////
+///                    FUNCTION DEFINITIONS                          ///
+////////////////////////////////////////////////////////////////////////
+
+/**Function*************************************************************
+
+  Synopsis    []
+
+  Description [Takes the level (lev0) of the plane, which should be swapped 
+  with the next plane. Returns the gain using the current cost function.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+double reoReorderSwapAdjacentVars( reo_man * p, int lev0, int fMovingUp )
+{
+    // the levels in the decision diagram
+    int lev1 = lev0 + 1, lev2 = lev0 + 2;
+    // the new nodes on lev0
+    reo_unit * pLoop, * pUnit;
+    // the new nodes on lev1
+    reo_unit * pNewPlane20, * pNewPlane21, * pNewPlane20R;
+    reo_unit * pUnitE, * pUnitER, * pUnitT;
+    // the nodes below lev1
+    reo_unit * pNew1E, * pNew1T, * pNew2E, * pNew2T;
+    reo_unit * pNew1ER, * pNew2ER;
+    // the old linked lists
+    reo_unit * pListOld0 = p->pPlanes[lev0].pHead;
+    reo_unit * pListOld1 = p->pPlanes[lev1].pHead;
+    // working planes and one more temporary plane
+    reo_unit * pListNew0 = NULL, ** ppListNew0 = &pListNew0;
+    reo_unit * pListNew1 = NULL, ** ppListNew1 = &pListNew1; 
+    reo_unit * pListTemp = NULL, ** ppListTemp = &pListTemp; 
+    // various integer variables
+    int fComp, fCompT, fFound, nWidthCofs, HKey, fInteract, temp, c;
+    // statistical variables
+    int nNodesUpMovedDown  = 0;
+    int nNodesDownMovedUp  = 0;
+    int nNodesUnrefRemoved = 0;
+    int nNodesUnrefAdded   = 0;
+    int nWidthReduction    = 0;
+    double AplWeightTotalLev0;
+    double AplWeightTotalLev1;
+    double AplWeightHalf;
+    double AplWeightPrev;
+    double AplWeightAfter;
+    double nCostGain;     
+
+    // set the old lists
+    assert( lev0 >= 0 && lev1 < p->nSupp );
+    pListOld0 = p->pPlanes[lev0].pHead;
+    pListOld1 = p->pPlanes[lev1].pHead;
+
+    // make sure the planes have nodes
+    assert( p->pPlanes[lev0].statsNodes && p->pPlanes[lev1].statsNodes );
+    assert( pListOld0 && pListOld1 );
+
+    if ( p->fMinWidth )
+    {
+        // verify that the width parameters are set correctly
+        reoProfileWidthVerifyLevel( p->pPlanes + lev0, lev0 );
+        reoProfileWidthVerifyLevel( p->pPlanes + lev1, lev1 );
+        // start the storage for cofactors
+        nWidthCofs = 0;
+    }
+    else if ( p->fMinApl )
+    {
+        AplWeightPrev      = p->nAplCur;
+        AplWeightAfter     = p->nAplCur;
+        AplWeightTotalLev0 = 0.0;
+        AplWeightTotalLev1 = 0.0;
+    }
+
+    // check if the planes interact
+    fInteract = 0; // assume that they do not interact
+    for ( pUnit = pListOld0; pUnit; pUnit = pUnit->Next )
+    {
+        if ( pUnit->pT->lev == lev1 || Unit_Regular(pUnit->pE)->lev == lev1 )
+        {
+            fInteract = 1;
+            break;
+        }
+        // change the level now, this is done for efficiency reasons
+        pUnit->lev = lev1;
+    }
+
+    // set the new signature for hashing
+    p->nSwaps++;
+    if ( !fInteract )
+//    if ( 0 )
+    {
+        // perform the swap without interaction
+        p->nNISwaps++;
+
+        // change the levels
+        if ( p->fMinWidth )
+        {
+            // go through the current lower level, which will become upper
+            for ( pUnit = pListOld1; pUnit; pUnit = pUnit->Next )
+            {
+                pUnit->lev = lev0;
+
+                pUnitER = Unit_Regular(pUnit->pE);
+                if ( pUnitER->TopRef > lev0 )
+                {
+                    if ( pUnitER->Sign != p->nSwaps )
+                    {
+                        if ( pUnitER->TopRef == lev2 )
+                        {
+                            pUnitER->TopRef = lev1;
+                            nWidthReduction--;
+                        }
+                        else
+                        {
+                            assert( pUnitER->TopRef == lev1 );
+                        }
+                        pUnitER->Sign   = p->nSwaps;
+                    }
+                }
+
+                pUnitT  = pUnit->pT;
+                if ( pUnitT->TopRef > lev0 )
+                {
+                    if ( pUnitT->Sign != p->nSwaps )
+                    {
+                        if ( pUnitT->TopRef == lev2 )
+                        {
+                            pUnitT->TopRef = lev1;
+                            nWidthReduction--;
+                        }
+                        else
+                        {
+                            assert( pUnitT->TopRef == lev1 );
+                        }
+                        pUnitT->Sign   = p->nSwaps;
+                    }
+                }
+
+            }
+
+            // go through the current upper level, which will become lower
+            for ( pUnit = pListOld0; pUnit; pUnit = pUnit->Next )
+            {
+                pUnit->lev = lev1;
+
+                pUnitER = Unit_Regular(pUnit->pE);
+                if ( pUnitER->TopRef > lev0 )
+                {
+                    if ( pUnitER->Sign != p->nSwaps )
+                    {
+                        assert( pUnitER->TopRef == lev1 );
+                        pUnitER->TopRef = lev2;
+                        pUnitER->Sign   = p->nSwaps;
+                        nWidthReduction++;
+                    }
+                }
+
+                pUnitT  = pUnit->pT;
+                if ( pUnitT->TopRef > lev0 )
+                {
+                    if ( pUnitT->Sign != p->nSwaps )
+                    {
+                        assert( pUnitT->TopRef == lev1 );
+                        pUnitT->TopRef = lev2;
+                        pUnitT->Sign   = p->nSwaps;
+                        nWidthReduction++;
+                    }
+                }
+            }
+        }
+        else
+        {
+//            for ( pUnit = pListOld0; pUnit; pUnit = pUnit->Next )
+//                pUnit->lev = lev1;
+            for ( pUnit = pListOld1; pUnit; pUnit = pUnit->Next )
+                pUnit->lev = lev0;
+        }
+
+        // set the new linked lists, which will be attached to the planes
+        pListNew0 = pListOld1;
+        pListNew1 = pListOld0;
+
+        if ( p->fMinApl )
+        {
+            AplWeightTotalLev0 = p->pPlanes[lev1].statsCost;
+            AplWeightTotalLev1 = p->pPlanes[lev0].statsCost;
+        }
+        
+        // set the changes in terms of nodes
+        nNodesUpMovedDown = p->pPlanes[lev0].statsNodes; 
+        nNodesDownMovedUp = p->pPlanes[lev1].statsNodes; 
+        goto finish;
+    }
+    p->Signature++;
+
+
+    // two-variable swap is done in three easy steps
+    // previously I thought that steps (1) and (2) can be merged into one step
+    // now it is clear that this cannot be done without changing a lot of other stuff...
+
+    // (1) walk through the upper level, find units without cofactors in the lower level 
+    //     and move them to the new lower level (while adding to the cache)
+    // (2) walk through the uppoer level, and tranform all the remaning nodes 
+    //     while employing cache for the new lower level
+    // (3) walk through the old lower level, find those nodes whose ref counters are not zero, 
+    //     and move them to the new uppoer level, free other nodes
+
+    // (1) walk through the upper level, find units without cofactors in the lower level 
+    //     and move them to the new lower level (while adding to the cache)
+    for ( pLoop = pListOld0; pLoop; )
+    {
+        pUnit = pLoop;
+        pLoop = pLoop->Next;
+
+        pUnitE  = pUnit->pE;
+        pUnitER = Unit_Regular(pUnitE);
+        pUnitT  = pUnit->pT;
+
+        if ( pUnitER->lev != lev1 && pUnitT->lev != lev1 )
+        {
+            //                before                        after
+            //
+            //                 <p1>           
+            //              0 /    \ 1         
+            //               /      \          
+            //              /        \         
+            //             /          \                     <p2n>   
+            //            /            \                  0 /  \ 1 
+            //           /              \                  /    \  
+            //          /                \                /      \ 
+            //         F0                F1              F0      F1
+
+            // move to plane-2-new
+            // nothing changes in the process (cofactors, ref counter, APL weight)
+            pUnit->lev = lev1;
+            AddToLinkedList( ppListNew1, pUnit );
+            if ( p->fMinApl )
+                AplWeightTotalLev1 += pUnit->Weight;
+
+            // add to cache - find the cell with different signature (not the current one!)
+            for (  HKey = hashKey3(p->Signature, pUnitE, pUnitT, p->nTableSize);
+                   p->HTable[HKey].Sign == p->Signature;
+                   HKey = (HKey+1) % p->nTableSize );
+            assert( p->HTable[HKey].Sign != p->Signature );
+            p->HTable[HKey].Sign = p->Signature;
+            p->HTable[HKey].Arg1 = pUnitE;
+            p->HTable[HKey].Arg2 = pUnitT;
+            p->HTable[HKey].Arg3 = pUnit;
+
+            nNodesUpMovedDown++;
+
+            if ( p->fMinWidth )
+            {
+                // update the cofactors's top ref
+                if ( pUnitER->TopRef > lev0 ) // the cofactor's top ref level is one of the current two levels
+                {
+                    assert( pUnitER->TopRef == lev1 );
+                    pUnitER->TopRefNew = lev2;
+                    if ( pUnitER->Sign != p->nSwaps )
+                    {
+                        pUnitER->Sign      = p->nSwaps;  // set the current signature
+                        p->pWidthCofs[ nWidthCofs++ ] = pUnitER;
+                    }
+                }
+                if ( pUnitT->TopRef > lev0 ) // the cofactor's top ref level is one of the current two levels
+                {
+                    assert( pUnitT->TopRef == lev1 );
+                    pUnitT->TopRefNew = lev2;
+                    if ( pUnitT->Sign != p->nSwaps )
+                    {
+                        pUnitT->Sign      = p->nSwaps;  // set the current signature
+                        p->pWidthCofs[ nWidthCofs++ ] = pUnitT;
+                    }
+                }
+            }
+        }
+        else
+        {
+            // add to the temporary plane
+            AddToLinkedList( ppListTemp, pUnit );
+        }
+    }
+
+
+    // (2) walk through the uppoer level, and tranform all the remaning nodes 
+    //     while employing cache for the new lower level
+    for ( pLoop = pListTemp; pLoop; )
+    {
+        pUnit = pLoop;
+        pLoop = pLoop->Next;
+
+        pUnitE  = pUnit->pE;
+        pUnitER = Unit_Regular(pUnitE);
+        pUnitT  = pUnit->pT;
+        fComp   = (int)(pUnitER != pUnitE);
+
+        // count the amount of weight to reduce the APL of the children of this node
+        if ( p->fMinApl )
+            AplWeightHalf = 0.5 * pUnit->Weight;
+
+        // determine what situation is this
+        if ( pUnitER->lev == lev1 && pUnitT->lev == lev1 )
+        {
+            if ( fComp == 0 )
+            {
+                //                before                        after
+                //
+                //                 <p1>                          <p1n>
+                //              0 /    \ 1                    0 /    \ 1            
+                //               /      \                      /      \           
+                //              /        \                    /        \         
+                //           <p2>        <p2>              <p2n>       <p2n>          
+                //        0 /   \ 1    0 /  \ 1          0 /  \ 1    0 /   \ 1    
+                //         /     \      /    \            /    \      /     \   
+                //        /       \    /      \          /      \    /       \   
+                //       F0       F1  F2      F3        F0      F2  F1       F3  
+                //                                 pNew1E   pNew1T  pNew2E   pNew2T
+                //
+                pNew1E = pUnitE->pE;   // F0
+                pNew1T = pUnitT->pE;   // F2
+
+                pNew2E = pUnitE->pT;   // F1
+                pNew2T = pUnitT->pT;   // F3
+            }
+            else
+            {
+                //                before                        after
+                //
+                //                 <p1>                          <p1n>
+                //              0 .    \ 1                    0 /    \ 1            
+                //               .      \                      /      \           
+                //              .        \                    /        \         
+                //           <p2>        <p2>              <p2n>       <p2n>          
+                //        0 /   \ 1    0 /  \ 1          0 .  \ 1    0 .   \ 1    
+                //         /     \      /    \            .    \      .     \   
+                //        /       \    /      \          .      \    .       \   
+                //       F0       F1  F2      F3        F0      F2  F1       F3  
+                //                                 pNew1E   pNew1T  pNew2E   pNew2T
+                //
+                pNew1E = Unit_Not(pUnitER->pE);  // F0
+                pNew1T =          pUnitT->pE;    // F2
+
+                pNew2E = Unit_Not(pUnitER->pT);  // F1
+                pNew2T =          pUnitT->pT;    // F3
+            }
+            // subtract ref counters - on the level P2
+            pUnitER->n--;
+            pUnitT->n--;
+
+            // mark the change in the APL weights
+            if ( p->fMinApl )
+            {
+                pUnitER->Weight -= AplWeightHalf;
+                pUnitT->Weight  -= AplWeightHalf;
+                AplWeightAfter  -= pUnit->Weight;
+            }
+        }
+        else if ( pUnitER->lev == lev1 )
+        {
+            if ( fComp == 0 )
+            {
+                //                before                        after
+                //
+                //                 <p1>                          <p1n>
+                //              0 /    \ 1                    0 /    \ 1            
+                //               /      \                      /      \           
+                //              /        \                    /        \         
+                //           <p2>         \               <p2n>       <p2n>           
+                //        0 /   \ 1        \            0 /  \ 1    0 /   \ 1    
+                //         /     \          \            /    \      /     \   
+                //        /       \          \          /      \    /       \   
+                //       F0       F1         F3        F0      F3  F1       F3  
+                //                                 pNew1E   pNew1T  pNew2E   pNew2T
+                //
+                pNew1E = pUnitER->pE;      // F0
+                pNew1T = pUnitT;          // F3
+
+                pNew2E = pUnitER->pT;     // F1
+                pNew2T = pUnitT;          // F3
+            }
+            else
+            {
+                //                before                        after
+                //
+                //                 <p1>                          <p1n>
+                //              0 .    \ 1                    0 /    \ 1            
+                //               .      \                      /      \           
+                //              .        \                    /        \         
+                //           <p2>         \                <p2n>       <p2n>          
+                //        0 /   \ 1        \            0 .  \ 1    0 .   \ 1    
+                //         /     \          \            .    \      .     \   
+                //        /       \          \          .      \    .       \   
+                //       F0       F1         F3        F0      F3  F1       F3  
+                //                                 pNew1E   pNew1T  pNew2E   pNew2T
+                //
+                pNew1E = Unit_Not(pUnitER->pE);  // F0
+                pNew1T =          pUnitT;        // F3
+
+                pNew2E = Unit_Not(pUnitER->pT);  // F1
+                pNew2T =          pUnitT;        // F3
+            }
+            // subtract ref counter - on the level P2
+            pUnitER->n--;
+            // subtract ref counter - on other levels
+            pUnitT->n--;  ///
+
+            // mark the change in the APL weights
+            if ( p->fMinApl )
+            {
+                pUnitER->Weight -= AplWeightHalf;
+                AplWeightAfter  -= AplWeightHalf;
+            }
+        }
+        else if ( pUnitT->lev == lev1 )
+        {
+            //                before                        after
+            //
+            //                 <p1>                          <p1n>
+            //              0 /    \ 1                    0 /    \ 1            
+            //               /      \                      /      \           
+            //              /        \                    /        \         
+            //             /         <p2>              <p2n>       <p2n>            
+            //            /       0 /   \ 1          0 /  \ 1    0 /   \ 1    
+            //           /         /     \            /    \      /     \   
+            //          /         /       \          /      \    /       \   
+            //         F0        F2       F3        F0      F2  F0       F3  
+            //                                 pNew1E   pNew1T  pNew2E   pNew2T
+            //
+            pNew1E =     pUnitE;    // F0
+            pNew1T = pUnitT->pE;    // F2
+
+            pNew2E =     pUnitE;    // F0
+            pNew2T = pUnitT->pT;    // F3
+
+            // subtract incoming edge counter - on the level P2
+            pUnitT->n--;
+            // subtract ref counter - on other levels
+            pUnitER->n--;  ///
+
+            // mark the change in the APL weights
+            if ( p->fMinApl )
+            {
+                pUnitT->Weight  -= AplWeightHalf;
+                AplWeightAfter  -= AplWeightHalf;
+            }
+        }
+        else 
+        {
+            assert( 0 ); // should never happen
+        }
+
+
+        // consider all the cases except the last one
+        if ( pNew1E == pNew1T )
+        {
+            pNewPlane20 = pNew1T;
+            
+            if ( p->fMinWidth )
+            {
+                // update the cofactors's top ref
+                if ( pNew1T->TopRef > lev0 ) // the cofactor's top ref level is one of the current two levels
+                {
+                    pNew1T->TopRefNew = lev1;
+                    if ( pNew1T->Sign  != p->nSwaps )
+                    {
+                        pNew1T->Sign      = p->nSwaps;  // set the current signature
+                        p->pWidthCofs[ nWidthCofs++ ] = pNew1T;
+                    }
+                }
+            }
+        }
+        else
+        {
+            // pNew1T can be complemented
+            fCompT = Cudd_IsComplement(pNew1T);
+            if ( fCompT )
+            {
+                pNew1E = Unit_Not(pNew1E);
+                pNew1T = Unit_Not(pNew1T);
+            }
+
+            // check the hash-table 
+            fFound = 0;
+            for (  HKey = hashKey3(p->Signature, pNew1E, pNew1T, p->nTableSize);
+                   p->HTable[HKey].Sign == p->Signature;
+                   HKey = (HKey+1) % p->nTableSize )
+            if ( p->HTable[HKey].Arg1 == pNew1E && p->HTable[HKey].Arg2 == pNew1T )
+            { // the entry is present 
+                // assign this entry
+                pNewPlane20 = p->HTable[HKey].Arg3;
+                assert( pNewPlane20->lev == lev1 );
+                fFound = 1;
+                p->HashSuccess++;
+                break;
+            }
+
+            if ( !fFound )
+            { // create the new entry
+                pNewPlane20 = reoUnitsGetNextUnit( p ); // increments the unit counter
+                pNewPlane20->pE  = pNew1E;
+                pNewPlane20->pT  = pNew1T;
+                pNewPlane20->n   = 0;       // ref will be added later
+                pNewPlane20->lev = lev1; 
+                if ( p->fMinWidth )
+                {
+                    pNewPlane20->TopRef = lev1;
+                    pNewPlane20->Sign   = 0;
+                }
+                // set the weight of this node
+                if ( p->fMinApl )
+                    pNewPlane20->Weight = 0.0;
+
+                // increment ref counters of children
+                pNew1ER = Unit_Regular(pNew1E);
+                pNew1ER->n++;  //
+                pNew1T->n++;   //
+
+                // insert into the data structure
+                AddToLinkedList( ppListNew1, pNewPlane20 );
+
+                // add this entry to cache
+                assert( p->HTable[HKey].Sign != p->Signature );
+                p->HTable[HKey].Sign = p->Signature;
+                p->HTable[HKey].Arg1 = pNew1E;
+                p->HTable[HKey].Arg2 = pNew1T;
+                p->HTable[HKey].Arg3 = pNewPlane20;
+
+                nNodesUnrefAdded++;
+                        
+                if ( p->fMinWidth )
+                {
+                    // update the cofactors's top ref
+                    if ( pNew1ER->TopRef > lev0 ) // the cofactor's top ref level is one of the current two levels
+                    {
+                        if ( pNew1ER->Sign != p->nSwaps )
+                        {
+                            pNew1ER->TopRefNew = lev2;
+                            if ( pNew1ER->Sign != p->nSwaps )
+                            {
+                                pNew1ER->Sign      = p->nSwaps;  // set the current signature
+                                p->pWidthCofs[ nWidthCofs++ ] = pNew1ER;
+                            }
+                        }
+                        // otherwise the level is already set correctly
+                        else
+                        {
+                            assert( pNew1ER->TopRefNew == lev1 || pNew1ER->TopRefNew == lev2 );
+                        }
+                    }
+                    // update the cofactors's top ref
+                    if ( pNew1T->TopRef > lev0 ) // the cofactor's top ref level is one of the current two levels
+                    {
+                        if ( pNew1T->Sign != p->nSwaps )
+                        {
+                            pNew1T->TopRefNew = lev2;
+                            if ( pNew1T->Sign  != p->nSwaps )
+                            {
+                                pNew1T->Sign      = p->nSwaps;  // set the current signature
+                                p->pWidthCofs[ nWidthCofs++ ] = pNew1T;
+                            }
+                        }
+                        // otherwise the level is already set correctly
+                        else
+                        {
+                            assert( pNew1T->TopRefNew == lev1 || pNew1T->TopRefNew == lev2 );
+                        }
+                    }
+                }
+            }
+
+            if ( p->fMinApl )
+            {
+                // increment the weight of this node
+                pNewPlane20->Weight += AplWeightHalf;
+                // mark the change in the APL weight
+                AplWeightAfter      += AplWeightHalf;
+                // update the total weight of this level
+                AplWeightTotalLev1  += AplWeightHalf;
+            }
+
+            if ( fCompT )
+                pNewPlane20 = Unit_Not(pNewPlane20);
+        }
+
+        if ( pNew2E == pNew2T )
+        {
+            pNewPlane21 = pNew2T;
+            
+            if ( p->fMinWidth )
+            {
+                // update the cofactors's top ref
+                if ( pNew2T->TopRef > lev0 ) // the cofactor's top ref level is one of the current two levels
+                {
+                    pNew2T->TopRefNew = lev1;
+                    if ( pNew2T->Sign != p->nSwaps )
+                    {
+                        pNew2T->Sign      = p->nSwaps;  // set the current signature
+                        p->pWidthCofs[ nWidthCofs++ ] = pNew2T;
+                    }
+                }
+            }
+        }
+        else
+        {
+            assert( !Cudd_IsComplement(pNew2T) );
+
+            // check the hash-table
+            fFound = 0;
+            for (  HKey = hashKey3(p->Signature, pNew2E, pNew2T, p->nTableSize);
+                   p->HTable[HKey].Sign == p->Signature;
+                   HKey = (HKey+1) % p->nTableSize )
+            if ( p->HTable[HKey].Arg1 == pNew2E && p->HTable[HKey].Arg2 == pNew2T )
+            { // the entry is present 
+                // assign this entry
+                pNewPlane21 = p->HTable[HKey].Arg3;
+                assert( pNewPlane21->lev == lev1 );
+                fFound = 1;
+                p->HashSuccess++;
+                break;
+            }
+
+            if ( !fFound )
+            { // create the new entry
+                pNewPlane21 = reoUnitsGetNextUnit( p ); // increments the unit counter
+                pNewPlane21->pE  = pNew2E;
+                pNewPlane21->pT  = pNew2T;
+                pNewPlane21->n   = 0;       // ref will be added later
+                pNewPlane21->lev = lev1; 
+                if ( p->fMinWidth )
+                {
+                    pNewPlane21->TopRef = lev1;
+                    pNewPlane21->Sign   = 0;
+                }
+                // set the weight of this node
+                if ( p->fMinApl )
+                    pNewPlane21->Weight = 0.0;
+
+                // increment ref counters of children
+                pNew2ER = Unit_Regular(pNew2E);
+                pNew2ER->n++; //
+                pNew2T->n++;  //
+
+                // insert into the data structure
+//                reoUnitsAddUnitToPlane( &P2new, pNewPlane21 );
+                AddToLinkedList( ppListNew1, pNewPlane21 );
+
+                // add this entry to cache
+                assert( p->HTable[HKey].Sign != p->Signature );
+                p->HTable[HKey].Sign = p->Signature;
+                p->HTable[HKey].Arg1 = pNew2E;
+                p->HTable[HKey].Arg2 = pNew2T;
+                p->HTable[HKey].Arg3 = pNewPlane21;
+
+                nNodesUnrefAdded++;
+
+                        
+                if ( p->fMinWidth )
+                {
+                    // update the cofactors's top ref
+                    if ( pNew2ER->TopRef > lev0 ) // the cofactor's top ref level is one of the current two levels
+                    {
+                        if ( pNew2ER->Sign != p->nSwaps )
+                        {
+                            pNew2ER->TopRefNew = lev2;
+                            if ( pNew2ER->Sign != p->nSwaps )
+                            {
+                                pNew2ER->Sign      = p->nSwaps;  // set the current signature
+                                p->pWidthCofs[ nWidthCofs++ ] = pNew2ER;
+                            }
+                        }
+                        // otherwise the level is already set correctly
+                        else
+                        {
+                            assert( pNew2ER->TopRefNew == lev1 || pNew2ER->TopRefNew == lev2 );
+                        }
+                    }
+                    // update the cofactors's top ref
+                    if ( pNew2T->TopRef > lev0 ) // the cofactor's top ref level is one of the current two levels
+                    {
+                        if ( pNew2T->Sign != p->nSwaps )
+                        {
+                            pNew2T->TopRefNew = lev2;
+                            if ( pNew2T->Sign != p->nSwaps )
+                            {
+                                pNew2T->Sign      = p->nSwaps;  // set the current signature
+                                p->pWidthCofs[ nWidthCofs++ ] = pNew2T;
+                            }
+                        }
+                        // otherwise the level is already set correctly
+                        else
+                        {
+                            assert( pNew2T->TopRefNew == lev1 || pNew2T->TopRefNew == lev2 );
+                        }
+                    }
+                }
+            }
+
+            if ( p->fMinApl )
+            {
+                // increment the weight of this node
+                pNewPlane21->Weight += AplWeightHalf;
+                // mark the change in the APL weight
+                AplWeightAfter      += AplWeightHalf;
+                // update the total weight of this level
+                AplWeightTotalLev1  += AplWeightHalf;
+            }
+        }
+        // in all cases, the node will be added to the plane-1
+        // this should be the same node (pUnit) as was originally there
+        // because it is referenced by the above nodes
+
+        assert( !Cudd_IsComplement(pNewPlane21) );
+        // should be the case; otherwise reordering is not a local operation
+
+        pUnit->pE  = pNewPlane20;
+        pUnit->pT  = pNewPlane21;
+        assert( pUnit->lev == lev0 ); 
+        // reference counter remains the same; the APL weight remains the same
+
+        // increment ref counters of children
+        pNewPlane20R = Unit_Regular(pNewPlane20);
+        pNewPlane20R->n++; ///
+        pNewPlane21->n++;  ///
+
+        // insert into the data structure
+        AddToLinkedList( ppListNew0, pUnit );
+        if ( p->fMinApl )
+            AplWeightTotalLev0 += pUnit->Weight;
+    }
+
+    // (3) walk through the old lower level, find those nodes whose ref counters are not zero, 
+    //     and move them to the new uppoer level, free other nodes
+    for ( pLoop = pListOld1; pLoop; )
+    {
+        pUnit = pLoop;
+        pLoop = pLoop->Next;
+        if ( pUnit->n )
+        { 
+            assert( !p->fMinApl || pUnit->Weight > 0.0 );
+            // the node should be added to the new level
+            // no need to check the hash table
+            pUnit->lev = lev0;
+            AddToLinkedList( ppListNew0, pUnit );
+            if ( p->fMinApl )
+                AplWeightTotalLev0 += pUnit->Weight;
+
+            nNodesDownMovedUp++;
+
+            if ( p->fMinWidth )
+            {
+                pUnitER = Unit_Regular(pUnit->pE);
+                pUnitT  = pUnit->pT;
+
+                // update the cofactors's top ref
+                if ( pUnitER->TopRef > lev0 ) // the cofactor's top ref level is one of the current two levels
+                {
+                    pUnitER->TopRefNew = lev1;
+                    if ( pUnitER->Sign != p->nSwaps )
+                    {
+                        pUnitER->Sign      = p->nSwaps;  // set the current signature
+                        p->pWidthCofs[ nWidthCofs++ ] = pUnitER;
+                    }
+                }
+                if ( pUnitT->TopRef > lev0 ) // the cofactor's top ref level is one of the current two levels
+                {
+                    pUnitT->TopRefNew = lev1;
+                    if ( pUnitT->Sign != p->nSwaps )
+                    {
+                        pUnitT->Sign      = p->nSwaps;  // set the current signature
+                        p->pWidthCofs[ nWidthCofs++ ] = pUnitT;
+                    }
+                }
+            }
+        }
+        else
+        {
+            assert( !p->fMinApl || pUnit->Weight == 0.0 );
+            // decrement reference counters of children
+            pUnitER = Unit_Regular(pUnit->pE);
+            pUnitT  = pUnit->pT;
+            pUnitER->n--;  ///
+            pUnitT->n--;   ///
+            // the node should be thrown away
+            reoUnitsRecycleUnit( p, pUnit );
+            nNodesUnrefRemoved++;
+        }
+    }
+
+finish:
+
+    // attach the new levels to the planes
+    p->pPlanes[lev0].pHead = pListNew0;
+    p->pPlanes[lev1].pHead = pListNew1;
+
+    // swap the sift status
+    temp                     = p->pPlanes[lev0].fSifted;
+    p->pPlanes[lev0].fSifted = p->pPlanes[lev1].fSifted;
+    p->pPlanes[lev1].fSifted = temp;
+
+    // swap variables in the variable map
+    if ( p->pOrderInt )
+    {
+        temp               = p->pOrderInt[lev0];
+        p->pOrderInt[lev0] = p->pOrderInt[lev1];
+        p->pOrderInt[lev1] = temp;
+    }
+
+    // adjust the node profile
+    p->pPlanes[lev0].statsNodes  -= (nNodesUpMovedDown - nNodesDownMovedUp);
+    p->pPlanes[lev1].statsNodes  -= (nNodesDownMovedUp - nNodesUpMovedDown) + nNodesUnrefRemoved - nNodesUnrefAdded;
+    p->nNodesCur                 -=  nNodesUnrefRemoved - nNodesUnrefAdded;
+
+    // adjust the node profile on this level
+    if ( p->fMinWidth )
+    {
+        for ( c = 0; c < nWidthCofs; c++ )
+        {
+            if ( p->pWidthCofs[c]->TopRefNew < p->pWidthCofs[c]->TopRef )
+            {
+                p->pWidthCofs[c]->TopRef = p->pWidthCofs[c]->TopRefNew;
+                nWidthReduction--;
+            }
+            else if ( p->pWidthCofs[c]->TopRefNew > p->pWidthCofs[c]->TopRef )
+            {
+                p->pWidthCofs[c]->TopRef = p->pWidthCofs[c]->TopRefNew;
+                nWidthReduction++;
+            }
+        }
+        // verify that the profile is okay
+        reoProfileWidthVerifyLevel( p->pPlanes + lev0, lev0 );
+        reoProfileWidthVerifyLevel( p->pPlanes + lev1, lev1 );
+
+        // compute the total gain in terms of width
+        nCostGain = (nNodesDownMovedUp - nNodesUpMovedDown + nNodesUnrefRemoved - nNodesUnrefAdded) + nWidthReduction;
+        // adjust the width on this level
+        p->pPlanes[lev1].statsWidth -= (int)nCostGain; 
+        // set the cost
+        p->pPlanes[lev1].statsCost   = p->pPlanes[lev1].statsWidth;
+    }
+    else if ( p->fMinApl )
+    {
+        // compute the total gain in terms of APL
+        nCostGain = AplWeightPrev - AplWeightAfter;
+        // make sure that the ALP is updated correctly
+//        assert( p->pPlanes[lev0].statsCost + p->pPlanes[lev1].statsCost - nCostGain ==
+//                AplWeightTotalLev0 + AplWeightTotalLev1 );                
+        // adjust the profile 
+        p->pPlanes[lev0].statsApl  = AplWeightTotalLev0;
+        p->pPlanes[lev1].statsApl  = AplWeightTotalLev1;
+        // set the cost
+        p->pPlanes[lev0].statsCost = p->pPlanes[lev0].statsApl;
+        p->pPlanes[lev1].statsCost = p->pPlanes[lev1].statsApl;
+    }
+    else
+    {
+        // compute the total gain in terms of the number of nodes
+        nCostGain = nNodesUnrefRemoved - nNodesUnrefAdded;
+        // adjust the profile (adjusted above)
+        // set the cost
+        p->pPlanes[lev0].statsCost   = p->pPlanes[lev0].statsNodes;
+        p->pPlanes[lev1].statsCost   = p->pPlanes[lev1].statsNodes;
+    }
+
+    return nCostGain;
+}
+
+////////////////////////////////////////////////////////////////////////
+///                         END OF FILE                              ///
+////////////////////////////////////////////////////////////////////////
+
diff --git a/abc70930/src/bdd/reo/reoTest.c b/abc70930/src/bdd/reo/reoTest.c
new file mode 100644
index 00000000..82f3d5f5
--- /dev/null
+++ b/abc70930/src/bdd/reo/reoTest.c
@@ -0,0 +1,251 @@
+/**CFile****************************************************************
+
+  FileName    [reoTest.c]
+
+  PackageName [REO: A specialized DD reordering engine.]
+
+  Synopsis    [Various testing procedures (may be outdated).]
+
+  Author      [Alan Mishchenko <alanmi@ece.pdx.edu>]
+  
+  Affiliation [ECE Department. Portland State University, Portland, Oregon.]
+
+  Date        [Ver. 1.0. Started - October 15, 2002.]
+
+  Revision    [$Id: reoTest.c,v 1.0 2002/15/10 03:00:00 alanmi Exp $]
+
+***********************************************************************/
+
+#include "reo.h"
+
+////////////////////////////////////////////////////////////////////////
+///                        DECLARATIONS                              ///
+////////////////////////////////////////////////////////////////////////
+
+////////////////////////////////////////////////////////////////////////
+///                    FUNCTION DEFINITIONS                          ///
+////////////////////////////////////////////////////////////////////////
+
+/**Function*************************************************************
+
+  Synopsis    [Reorders the DD using REO and CUDD.]
+
+  Description [This function can be used to test the performance of the reordering package.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void Extra_ReorderTest( DdManager * dd, DdNode * Func )
+{
+    reo_man * pReo;
+    DdNode * Temp, * Temp1;
+    int pOrder[1000];
+
+    pReo = Extra_ReorderInit( 100, 100 );
+
+//Extra_DumpDot( dd, &Func, 1, "beforReo.dot", 0 );
+    Temp  = Extra_Reorder( pReo, dd, Func, pOrder );  Cudd_Ref( Temp );
+//Extra_DumpDot( dd, &Temp, 1, "afterReo.dot", 0 );
+
+    Temp1 = Extra_ReorderCudd(dd, Func, NULL );           Cudd_Ref( Temp1 );
+printf( "Initial = %d. Final = %d. Cudd = %d.\n", Cudd_DagSize(Func), Cudd_DagSize(Temp), Cudd_DagSize(Temp1)  );
+    Cudd_RecursiveDeref( dd, Temp1 );
+    Cudd_RecursiveDeref( dd, Temp );
+ 
+    Extra_ReorderQuit( pReo );
+}
+
+
+/**Function*************************************************************
+
+  Synopsis    [Reorders the DD using REO and CUDD.]
+
+  Description [This function can be used to test the performance of the reordering package.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void Extra_ReorderTestArray( DdManager * dd, DdNode * Funcs[], int nFuncs )
+{
+    reo_man * pReo;
+    DdNode * FuncsRes[1000];
+    int pOrder[1000];
+    int i;
+
+    pReo = Extra_ReorderInit( 100, 100 );
+    Extra_ReorderArray( pReo, dd, Funcs, FuncsRes, nFuncs, pOrder );  
+    Extra_ReorderQuit( pReo );
+
+printf( "Initial = %d. Final = %d.\n", Cudd_SharingSize(Funcs,nFuncs), Cudd_SharingSize(FuncsRes,nFuncs) );
+
+    for ( i = 0; i < nFuncs; i++ )
+        Cudd_RecursiveDeref( dd, FuncsRes[i] );
+
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Reorders the DD using CUDD package.]
+
+  Description [Transfers the DD into a temporary manager in such a way
+  that the level correspondence is preserved. Reorders the manager
+  and transfers the DD back into the original manager using the topmost
+  levels of the manager, in such a way that the ordering of levels is
+  preserved. The resulting permutation is returned in the array
+  given by the user.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+DdNode * Extra_ReorderCudd( DdManager * dd, DdNode * aFunc, int pPermuteReo[] )
+{
+    static DdManager * ddReorder = NULL;
+    static int * Permute     = NULL;
+    static int * PermuteReo1 = NULL;
+    static int * PermuteReo2 = NULL;
+    DdNode * aFuncReorder, * aFuncNew;
+    int lev, var;
+
+    // start the reordering manager
+    if ( ddReorder == NULL )
+    {
+        Permute       = ALLOC( int, dd->size );
+        PermuteReo1   = ALLOC( int, dd->size );
+        PermuteReo2   = ALLOC( int, dd->size );
+        ddReorder = Cudd_Init( dd->size, 0, CUDD_UNIQUE_SLOTS, CUDD_CACHE_SLOTS, 0 );
+        Cudd_AutodynDisable(ddReorder);
+    }
+
+    // determine the permutation of variable to make sure that var order in bFunc
+    // will not change when this function is transfered into the new manager
+    for ( lev = 0; lev < dd->size; lev++ )
+    {
+        Permute[ dd->invperm[lev] ] = ddReorder->invperm[lev];
+        PermuteReo1[ ddReorder->invperm[lev] ] = dd->invperm[lev];
+    }
+    // transfer this function into the new manager in such a way that ordering of vars does not change
+    aFuncReorder = Extra_TransferPermute( dd, ddReorder, aFunc, Permute );  Cudd_Ref( aFuncReorder );
+//    assert( Cudd_DagSize(aFunc) == Cudd_DagSize(aFuncReorder)  );
+
+    // perform the reordering
+printf( "Nodes before = %d.\n", Cudd_DagSize(aFuncReorder) );
+    Cudd_ReduceHeap( ddReorder, CUDD_REORDER_SYMM_SIFT, 1 );
+printf( "Nodes before = %d.\n", Cudd_DagSize(aFuncReorder) );
+
+    // determine the reverse variable permutation
+    for ( lev = 0; lev < dd->size; lev++ )
+    {
+        Permute[ ddReorder->invperm[lev] ] = dd->invperm[lev];
+        PermuteReo2[ dd->invperm[lev] ] = ddReorder->invperm[lev];
+    }
+
+    // transfer this function into the new manager in such a way that ordering of vars does not change
+    aFuncNew = Extra_TransferPermute( ddReorder, dd, aFuncReorder, Permute );  Cudd_Ref( aFuncNew );
+//    assert( Cudd_DagSize(aFuncNew) == Cudd_DagSize(aFuncReorder)  );
+    Cudd_RecursiveDeref( ddReorder, aFuncReorder );
+
+    // derive the resulting variable ordering
+    if ( pPermuteReo )
+        for ( var = 0; var < dd->size; var++ )
+            pPermuteReo[var] = PermuteReo1[ PermuteReo2[var] ];
+
+    Cudd_Deref( aFuncNew );
+    return aFuncNew;
+}
+
+
+/**Function*************************************************************
+
+  Synopsis    []
+
+  Description [Transfers the BDD into another manager minimizes it and 
+  returns the min number of nodes; disposes of the BDD in the new manager.
+  Useful for debugging or comparing the performance of other reordering
+  procedures.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+int Extra_bddReorderTest( DdManager * dd, DdNode * bF )
+{
+    static DdManager * s_ddmin;
+    DdNode * bFmin;
+    int  nNodes;
+//    int clk1;
+
+    if ( s_ddmin == NULL )
+        s_ddmin = Cudd_Init( dd->size, 0, CUDD_UNIQUE_SLOTS, CUDD_CACHE_SLOTS, 0);
+
+//    Cudd_ShuffleHeap( s_ddmin, dd->invperm );
+
+//    clk1 = clock();
+    bFmin = Cudd_bddTransfer( dd, s_ddmin, bF );  Cudd_Ref( bFmin );
+    Cudd_ReduceHeap(s_ddmin,CUDD_REORDER_SIFT,1);
+//    Cudd_ReduceHeap(s_ddmin,CUDD_REORDER_SYMM_SIFT,1);
+    nNodes = Cudd_DagSize( bFmin );
+    Cudd_RecursiveDeref( s_ddmin, bFmin );
+
+//    printf( "Classical variable reordering time = %.2f sec\n", (float)(clock() - clk1)/(float)(CLOCKS_PER_SEC) );
+    return nNodes;
+}
+
+/**Function*************************************************************
+
+  Synopsis    []
+
+  Description [Transfers the ADD into another manager minimizes it and 
+  returns the min number of nodes; disposes of the BDD in the new manager.
+  Useful for debugging or comparing the performance of other reordering
+  procedures.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+int Extra_addReorderTest( DdManager * dd, DdNode * aF )
+{
+    static DdManager * s_ddmin;
+    DdNode * bF;
+    DdNode * bFmin;
+    DdNode * aFmin;
+    int  nNodesBeg;
+    int  nNodesEnd;
+    int clk1;
+
+    if ( s_ddmin == NULL )
+        s_ddmin = Cudd_Init( dd->size, 0, CUDD_UNIQUE_SLOTS, CUDD_CACHE_SLOTS, 0);
+
+//    Cudd_ShuffleHeap( s_ddmin, dd->invperm );
+
+    clk1 = clock();
+    bF    = Cudd_addBddPattern( dd, aF );         Cudd_Ref( bF );
+    bFmin = Cudd_bddTransfer( dd, s_ddmin, bF );  Cudd_Ref( bFmin );
+    Cudd_RecursiveDeref( dd, bF );
+    aFmin = Cudd_BddToAdd( s_ddmin, bFmin );      Cudd_Ref( aFmin );
+    Cudd_RecursiveDeref( s_ddmin, bFmin );
+
+    nNodesBeg = Cudd_DagSize( aFmin );
+    Cudd_ReduceHeap(s_ddmin,CUDD_REORDER_SIFT,1);
+//    Cudd_ReduceHeap(s_ddmin,CUDD_REORDER_SYMM_SIFT,1);
+    nNodesEnd = Cudd_DagSize( aFmin );
+    Cudd_RecursiveDeref( s_ddmin, aFmin );
+
+    printf( "Classical reordering of ADDs: Before = %d. After = %d.\n", nNodesBeg, nNodesEnd );
+    printf( "Classical variable reordering time = %.2f sec\n", (float)(clock() - clk1)/(float)(CLOCKS_PER_SEC) );
+    return nNodesEnd;
+}
+
+
+////////////////////////////////////////////////////////////////////////
+///                         END OF FILE                              ///
+////////////////////////////////////////////////////////////////////////
+
diff --git a/abc70930/src/bdd/reo/reoTransfer.c b/abc70930/src/bdd/reo/reoTransfer.c
new file mode 100644
index 00000000..65d31d01
--- /dev/null
+++ b/abc70930/src/bdd/reo/reoTransfer.c
@@ -0,0 +1,199 @@
+/**CFile****************************************************************
+
+  FileName    [reoTransfer.c]
+
+  PackageName [REO: A specialized DD reordering engine.]
+
+  Synopsis    [Transfering a DD from the CUDD manager into REO"s internal data structures and back.]
+
+  Author      [Alan Mishchenko]
+  
+  Affiliation [UC Berkeley]
+
+  Date        [Ver. 1.0. Started - October 15, 2002.]
+
+  Revision    [$Id: reoTransfer.c,v 1.0 2002/15/10 03:00:00 alanmi Exp $]
+
+***********************************************************************/
+
+#include "reo.h"
+
+////////////////////////////////////////////////////////////////////////
+///                        DECLARATIONS                              ///
+////////////////////////////////////////////////////////////////////////
+
+////////////////////////////////////////////////////////////////////////
+///                    FUNCTION DEFINITIONS                          ///
+////////////////////////////////////////////////////////////////////////
+
+/**Function*************************************************************
+
+  Synopsis    [Transfers the DD into the internal reordering data structure.]
+
+  Description [It is important that the hash table is lossless.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+reo_unit * reoTransferNodesToUnits_rec( reo_man * p, DdNode * F )
+{
+    DdManager * dd = p->dd;
+    reo_unit * pUnit;
+    int HKey, fComp;
+    
+    fComp = Cudd_IsComplement(F);
+    F = Cudd_Regular(F);
+
+    // check the hash-table
+    if ( F->ref != 1 )
+    {
+        // search cache - use linear probing
+        for ( HKey = hashKey2(p->Signature,F,p->nTableSize); p->HTable[HKey].Sign == p->Signature; HKey = (HKey+1) % p->nTableSize )
+            if ( p->HTable[HKey].Arg1 == (reo_unit *)F )
+            {
+                pUnit = p->HTable[HKey].Arg2;  
+                assert( pUnit );
+                // increment the edge counter
+                pUnit->n++;
+                return Unit_NotCond( pUnit, fComp );
+            }
+    }
+    // the entry in not found in the cache
+    
+    // create a new entry
+    pUnit         = reoUnitsGetNextUnit( p );
+    pUnit->n      = 1;
+    if ( cuddIsConstant(F) )
+    {
+        pUnit->lev    = REO_CONST_LEVEL;
+        pUnit->pE     = (reo_unit*)((int)(cuddV(F)));
+        pUnit->pT     = NULL;
+        // check if the diagram that is being reordering has complement edges
+        if ( F != dd->one )
+            p->fThisIsAdd = 1;
+        // insert the unit into the corresponding plane
+        reoUnitsAddUnitToPlane( &(p->pPlanes[p->nSupp]), pUnit ); // increments the unit counter
+    }
+    else
+    {
+        pUnit->lev    = p->pMapToPlanes[F->index];
+        pUnit->pE     = reoTransferNodesToUnits_rec( p, cuddE(F) );
+        pUnit->pT     = reoTransferNodesToUnits_rec( p, cuddT(F) );
+        // insert the unit into the corresponding plane
+        reoUnitsAddUnitToPlane( &(p->pPlanes[pUnit->lev]), pUnit ); // increments the unit counter
+    }
+
+    // add to the hash table
+    if ( F->ref != 1 )
+    {
+        // the next free entry is already found - it is pointed to by HKey
+        // while we traversed the diagram, the hash entry to which HKey points,
+        // might have been used. Make sure that its signature is different.
+        for ( ; p->HTable[HKey].Sign == p->Signature; HKey = (HKey+1) % p->nTableSize );
+        p->HTable[HKey].Sign = p->Signature;
+        p->HTable[HKey].Arg1 = (reo_unit *)F;
+        p->HTable[HKey].Arg2 = pUnit;
+    }
+
+    // increment the counter of nodes
+    p->nNodesCur++;
+    return Unit_NotCond( pUnit, fComp );
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Creates the DD from the internal reordering data structure.]
+
+  Description [It is important that the hash table is lossless.]
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+DdNode * reoTransferUnitsToNodes_rec( reo_man * p, reo_unit * pUnit )
+{
+    DdManager * dd = p->dd;
+    DdNode * bRes, * E, * T;
+    int HKey, fComp;
+
+    fComp = Cudd_IsComplement(pUnit);
+    pUnit = Unit_Regular(pUnit);
+
+    // check the hash-table
+    if ( pUnit->n != 1 )
+    {
+        for ( HKey = hashKey2(p->Signature,pUnit,p->nTableSize); p->HTable[HKey].Sign == p->Signature; HKey = (HKey+1) % p->nTableSize )
+            if ( p->HTable[HKey].Arg1 == pUnit )
+            {
+                bRes = (DdNode*) p->HTable[HKey].Arg2;  
+                assert( bRes );
+                return Cudd_NotCond( bRes, fComp );
+            }
+    }
+
+    // treat the case of constants
+    if ( Unit_IsConstant(pUnit) )
+    {
+        bRes = cuddUniqueConst( dd, ((double)((int)(pUnit->pE))) );
+        cuddRef( bRes );
+    }
+    else
+    {
+        // split and recur on children of this node
+        E = reoTransferUnitsToNodes_rec( p, pUnit->pE );
+        if ( E == NULL )
+            return NULL;
+        cuddRef(E);
+
+        T = reoTransferUnitsToNodes_rec( p, pUnit->pT );
+        if ( T == NULL )
+        {
+            Cudd_RecursiveDeref(dd, E);
+            return NULL;
+        }
+        cuddRef(T);
+        
+        // consider the case when Res0 and Res1 are the same node
+        assert( E != T );
+        assert( !Cudd_IsComplement(T) );
+
+        bRes = cuddUniqueInter( dd, p->pMapToDdVarsFinal[pUnit->lev], T, E );
+        if ( bRes == NULL ) 
+        {
+            Cudd_RecursiveDeref(dd,E);
+            Cudd_RecursiveDeref(dd,T);
+            return NULL;
+        }
+        cuddRef( bRes );
+        cuddDeref( E );
+        cuddDeref( T );
+    }
+
+    // do not keep the result if the ref count is only 1, since it will not be visited again
+    if ( pUnit->n != 1 )
+    {
+         // while we traversed the diagram, the hash entry to which HKey points,
+         // might have been used. Make sure that its signature is different.
+         for ( ; p->HTable[HKey].Sign == p->Signature; HKey = (HKey+1) % p->nTableSize );
+         p->HTable[HKey].Sign = p->Signature;
+         p->HTable[HKey].Arg1 = pUnit;
+         p->HTable[HKey].Arg2 = (reo_unit *)bRes;  
+
+         // add the DD to the referenced DD list in order to be able to store it in cache
+         p->pRefNodes[p->nRefNodes++] = bRes;  Cudd_Ref( bRes ); 
+         // no need to do this, because the garbage collection will not take bRes away
+         // it is held by the diagram in the making
+    }
+    // increment the counter of nodes
+    p->nNodesCur++;
+    cuddDeref( bRes );
+    return Cudd_NotCond( bRes, fComp );
+}
+
+////////////////////////////////////////////////////////////////////////
+///                         END OF FILE                              ///
+////////////////////////////////////////////////////////////////////////
+
diff --git a/abc70930/src/bdd/reo/reoUnits.c b/abc70930/src/bdd/reo/reoUnits.c
new file mode 100644
index 00000000..aa86516e
--- /dev/null
+++ b/abc70930/src/bdd/reo/reoUnits.c
@@ -0,0 +1,184 @@
+/**CFile****************************************************************
+
+  FileName    [reoUnits.c]
+
+  PackageName [REO: A specialized DD reordering engine.]
+
+  Synopsis    [Procedures which support internal data structures.]
+
+  Author      [Alan Mishchenko]
+  
+  Affiliation [UC Berkeley]
+
+  Date        [Ver. 1.0. Started - October 15, 2002.]
+
+  Revision    [$Id: reoUnits.c,v 1.0 2002/15/10 03:00:00 alanmi Exp $]
+
+***********************************************************************/
+
+#include "reo.h"
+
+////////////////////////////////////////////////////////////////////////
+///                        DECLARATIONS                              ///
+////////////////////////////////////////////////////////////////////////
+
+static void reoUnitsAddToFreeUnitList( reo_man * p );
+
+////////////////////////////////////////////////////////////////////////
+///                    FUNCTION DEFINITIONS                          ///
+////////////////////////////////////////////////////////////////////////
+
+/**Function*************************************************************
+
+  Synopsis    [Extract the next unit from the free unit list.]
+
+  Description []
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+reo_unit * reoUnitsGetNextUnit(reo_man * p )
+{
+    reo_unit * pUnit;
+    // check there are stil units to extract
+    if ( p->pUnitFreeList == NULL )
+        reoUnitsAddToFreeUnitList( p );
+    // extract the next unit from the linked list
+    pUnit            = p->pUnitFreeList;
+    p->pUnitFreeList = pUnit->Next;
+    p->nUnitsUsed++;
+    return pUnit;
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Returns the unit to the free unit list.]
+
+  Description []
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void reoUnitsRecycleUnit( reo_man * p, reo_unit * pUnit )
+{
+    pUnit->Next      = p->pUnitFreeList;
+    p->pUnitFreeList = pUnit;
+    p->nUnitsUsed--;
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Returns the list of units to the free unit list.]
+
+  Description []
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void reoUnitsRecycleUnitList( reo_man * p, reo_plane * pPlane )
+{
+    reo_unit * pUnit;
+    reo_unit * pTail;
+
+    if ( pPlane->pHead == NULL )
+        return;
+
+    // find the tail
+    for ( pUnit = pPlane->pHead; pUnit; pUnit = pUnit->Next )
+        pTail = pUnit;
+    pTail->Next = p->pUnitFreeList;
+    p->pUnitFreeList    = pPlane->pHead;
+    memset( pPlane, 0, sizeof(reo_plane) );
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Stops the unit dispenser.]
+
+  Description []
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void reoUnitsStopDispenser( reo_man * p )
+{
+    int i;
+    for ( i = 0; i < p->nMemChunks; i++ )
+        free( p->pMemChunks[i] );
+//    printf("\nThe number of chunks used is %d, each of them %d units\n", p->nMemChunks, REO_CHUNK_SIZE );
+    p->nMemChunks = 0;
+}
+
+/**Function*************************************************************
+
+  Synopsis    [Adds one unit to the list of units which constitutes the plane.]
+
+  Description []
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void reoUnitsAddUnitToPlane( reo_plane * pPlane, reo_unit * pUnit )
+{
+    if ( pPlane->pHead == NULL )
+    {
+        pPlane->pHead = pUnit;
+        pUnit->Next   = NULL;
+    }
+    else
+    {
+        pUnit->Next   = pPlane->pHead;
+        pPlane->pHead = pUnit;
+    }
+    pPlane->statsNodes++;
+}
+
+
+/**Function*************************************************************
+
+  Synopsis    []
+
+  Description []
+
+  SideEffects []
+
+  SeeAlso     []
+
+***********************************************************************/
+void reoUnitsAddToFreeUnitList( reo_man * p )
+{
+    int c;
+    // check that we still have chunks left
+    if ( p->nMemChunks == p->nMemChunksAlloc )
+    {
+        printf( "reoUnitsAddToFreeUnitList(): Memory manager ran out of memory!\n" );
+        fflush( stdout );
+        return;
+    }
+    // allocate the next chunk
+    assert( p->pUnitFreeList == NULL );
+    p->pUnitFreeList = ALLOC( reo_unit, REO_CHUNK_SIZE );
+    // split chunks into list-connected units
+    for ( c = 0; c < REO_CHUNK_SIZE-1; c++ )
+        (p->pUnitFreeList + c)->Next = p->pUnitFreeList + c + 1;
+    // set the last pointer to NULL
+    (p->pUnitFreeList + REO_CHUNK_SIZE-1)->Next = NULL;
+    // add the chunk to the array of chunks
+    p->pMemChunks[p->nMemChunks++] = p->pUnitFreeList;
+}
+
+
+////////////////////////////////////////////////////////////////////////
+///                         END OF FILE                              ///
+////////////////////////////////////////////////////////////////////////
+