#!/bin/bash

# Adapted from https://tasmota.github.io/docs/Rules/#simple-thermostat-example

# Button give 30 mins of hot.

# Low setpoint is var1
# High setpoint is var2
# Have water in var3

# Timer1 is used as a WDT incase sensor fails
#

M=10.32.139.1


set -x

T=music_room_humidifier

mosquitto_pub -h "${M}" -t "cmnd/${T}/Backlog" -m "Rule1 1; Rule1 4; Rule2 1; Rule2 4; Rule3 1; Rule3 4"
sleep 3
mosquitto_pub -h "${M}" -t "cmnd/${T}/Backlog" -m "TelePeriod 60; SetOption26 0; SetOption0 0; PowerOnState 0; switchmode2 1"
sleep 3
mosquitto_pub -h "${M}" -t "cmnd/${T}/Backlog" -m "Setoption36 0; Setoption65 1; Setoption1 1; SensorRetain 1; PowerRetain 1"
sleep 3
mosquitto_pub -h "${M}" -t "cmnd/${T}/Backlog" -m "SwitchMode1 0;SwitchMode2 1; SetOption63 1; LedMask 2"
sleep 3



## timer 1 turns off if we lose contact with sensor
## publish a humid event on humidity data

read -r -d '' R << EOF
  ON system#boot DO Backlog RuleTimer1 70; var1 48; var2 53; ENDON 
  ON Rules#Timer=1 DO Backlog RuleTimer1 70; Power1 0 ENDON 
  ON tele-SI7021#humidity DO Backlog RuleTimer1 70; Event humid=%value% ENDON 
EOF
R="$(echo $R)"

mosquitto_pub -h "${M}" -t "cmnd/${T}/Rule1" -m "${R}"
sleep 5

## publish setpoints on humidity data

read -r -d '' R << EOF
  ON Event#humid DO BackLog Publish2 stat/${T}/var1 %var1%; Publish2 stat/${T}/var2 %var2%; Publish2 stat/${T}/var3 %var3% ENDON
  ON Switch2#state=0 DO BackLog var3 0; Power1 0 ENDON
  ON Switch2#state=1 DO var3 1 ENDON
EOF
R="$(echo $R)"

mosquitto_pub -h "${M}" -t "cmnd/${T}/Rule2" -m "${R}"
sleep 5

## 

read -r -d '' R << EOF
  ON Event#humid<%var1% DO Power1 %var3% ENDON
  ON Event#humid>%var2% DO Power1 0 ENDON
EOF
R="$(echo $R)"

mosquitto_pub -h "${M}" -t "cmnd/${T}/Rule3" -m "${R}"
sleep 5

#

mosquitto_pub -h "${M}" -t "cmnd/${T}/Restart" -m "1"


exit 0