Connection is used to establish an encrypted TCP/IP
* connection to a SSH-2 server.
* * Typically, one *
Connection object which can then be used
* to establish a connection to the specified SSH-2 server.
*
* Same as {@link #Connection(String, int) Connection(hostname, 22)}.
*
* @param hostname
* the hostname of the SSH-2 server.
*/
public Connection(String hostname)
{
this(hostname, 22);
}
/**
* Prepares a fresh Connection object which can then be used
* to establish a connection to the specified SSH-2 server.
*
* @param hostname
* the host where we later want to connect to.
* @param port
* port on the server, normally 22.
*/
public Connection(String hostname, int port)
{
this.hostname = hostname;
this.port = port;
}
/**
* After a successful connect, one has to authenticate oneself. This method
* is based on DSA (it uses DSA to sign a challenge sent by the server).
*
* If the authentication phase is complete, true will be
* returned. If the server does not accept the request (or if further
* authentication steps are needed), false is returned and
* one can retry either by using this or any other authentication method
* (use the getRemainingAuthMethods method to get a list of
* the remaining possible methods).
*
* @param user
* A String holding the username.
* @param pem
* A String containing the DSA private key of the
* user in OpenSSH key format (PEM, you can't miss the
* "-----BEGIN DSA PRIVATE KEY-----" tag). The string may contain
* linefeeds.
* @param password
* If the PEM string is 3DES encrypted ("DES-EDE3-CBC"), then you
* must specify the password. Otherwise, this argument will be
* ignored and can be set to null.
*
* @return whether the connection is now authenticated.
* @throws IOException
*
* @deprecated You should use one of the
* {@link #authenticateWithPublicKey(String, File, String) authenticateWithPublicKey()}
* methods, this method is just a wrapper for it and will
* disappear in future builds.
*
*/
public synchronized boolean authenticateWithDSA(String user, String pem, String password) throws IOException
{
if (tm == null)
throw new IllegalStateException("Connection is not established!");
if (authenticated)
throw new IllegalStateException("Connection is already authenticated!");
if (am == null)
am = new AuthenticationManager(tm);
if (cm == null)
cm = new ChannelManager(tm);
if (user == null)
throw new IllegalArgumentException("user argument is null");
if (pem == null)
throw new IllegalArgumentException("pem argument is null");
authenticated = am.authenticatePublicKey(user, pem.toCharArray(), password, getOrCreateSecureRND());
return authenticated;
}
/**
* A wrapper that calls
* {@link #authenticateWithKeyboardInteractive(String, String[], InteractiveCallback)
* authenticateWithKeyboardInteractivewith} a null submethod
* list.
*
* @param user
* A String holding the username.
* @param cb
* An InteractiveCallback which will be used to
* determine the responses to the questions asked by the server.
* @return whether the connection is now authenticated.
* @throws IOException
*/
public synchronized boolean authenticateWithKeyboardInteractive(String user, InteractiveCallback cb)
throws IOException
{
return authenticateWithKeyboardInteractive(user, null, cb);
}
/**
* After a successful connect, one has to authenticate oneself. This method
* is based on "keyboard-interactive", specified in
* draft-ietf-secsh-auth-kbdinteract-XX. Basically, you have to define a
* callback object which will be feeded with challenges generated by the
* server. Answers are then sent back to the server. It is possible that the
* callback will be called several times during the invocation of this
* method (e.g., if the server replies to the callback's answer(s) with
* another challenge...)
*
* If the authentication phase is complete, true will be
* returned. If the server does not accept the request (or if further
* authentication steps are needed), false is returned and
* one can retry either by using this or any other authentication method
* (use the getRemainingAuthMethods method to get a list of
* the remaining possible methods).
*
* Note: some SSH servers advertise "keyboard-interactive", however, any
* interactive request will be denied (without having sent any challenge to
* the client).
*
* @param user
* A String holding the username.
* @param submethods
* An array of submethod names, see
* draft-ietf-secsh-auth-kbdinteract-XX. May be null
* to indicate an empty list.
* @param cb
* An InteractiveCallback which will be used to
* determine the responses to the questions asked by the server.
*
* @return whether the connection is now authenticated.
* @throws IOException
*/
public synchronized boolean authenticateWithKeyboardInteractive(String user, String[] submethods,
InteractiveCallback cb) throws IOException
{
if (cb == null)
throw new IllegalArgumentException("Callback may not ne NULL!");
if (tm == null)
throw new IllegalStateException("Connection is not established!");
if (authenticated)
throw new IllegalStateException("Connection is already authenticated!");
if (am == null)
am = new AuthenticationManager(tm);
if (cm == null)
cm = new ChannelManager(tm);
if (user == null)
throw new IllegalArgumentException("user argument is null");
authenticated = am.authenticateInteractive(user, submethods, cb);
return authenticated;
}
/**
* After a successful connect, one has to authenticate oneself. This method
* sends username and password to the server.
*
* If the authentication phase is complete, true will be
* returned. If the server does not accept the request (or if further
* authentication steps are needed), false is returned and
* one can retry either by using this or any other authentication method
* (use the getRemainingAuthMethods method to get a list of
* the remaining possible methods).
*
* Note: if this method fails, then please double-check that it is actually * offered by the server (use * {@link #getRemainingAuthMethods(String) getRemainingAuthMethods()}. *
* Often, password authentication is disabled, but users are not aware of * it. Many servers only offer "publickey" and "keyboard-interactive". * However, even though "keyboard-interactive" *feels* like password * authentication (e.g., when using the putty or openssh clients) it is * *not* the same mechanism. * * @param user * @param password * @return if the connection is now authenticated. * @throws IOException */ public synchronized boolean authenticateWithPassword(String user, String password) throws IOException { if (tm == null) throw new IllegalStateException("Connection is not established!"); if (authenticated) throw new IllegalStateException("Connection is already authenticated!"); if (am == null) am = new AuthenticationManager(tm); if (cm == null) cm = new ChannelManager(tm); if (user == null) throw new IllegalArgumentException("user argument is null"); if (password == null) throw new IllegalArgumentException("password argument is null"); authenticated = am.authenticatePassword(user, password); return authenticated; } /** * After a successful connect, one has to authenticate oneself. This method * can be used to explicitly use the special "none" authentication method * (where only a username has to be specified). *
* Note 1: The "none" method may always be tried by clients, however as by * the specs, the server will not explicitly announce it. In other words, * the "none" token will never show up in the list returned by * {@link #getRemainingAuthMethods(String)}. *
* Note 2: no matter which one of the authenticateWithXXX() methods you * call, the library will always issue exactly one initial "none" * authentication request to retrieve the initially allowed list of * authentication methods by the server. Please read RFC 4252 for the * details. *
* If the authentication phase is complete, true will be
* returned. If further authentication steps are needed, false
* is returned and one can retry by any other authentication method (use the
* getRemainingAuthMethods method to get a list of the
* remaining possible methods).
*
* @param user
* @return if the connection is now authenticated.
* @throws IOException
*/
public synchronized boolean authenticateWithNone(String user) throws IOException
{
if (tm == null)
throw new IllegalStateException("Connection is not established!");
if (authenticated)
throw new IllegalStateException("Connection is already authenticated!");
if (am == null)
am = new AuthenticationManager(tm);
if (cm == null)
cm = new ChannelManager(tm);
if (user == null)
throw new IllegalArgumentException("user argument is null");
/* Trigger the sending of the PacketUserauthRequestNone packet */
/* (if not already done) */
authenticated = am.authenticateNone(user);
return authenticated;
}
/**
* After a successful connect, one has to authenticate oneself. The
* authentication method "publickey" works by signing a challenge sent by
* the server. The signature is either DSA or RSA based - it just depends on
* the type of private key you specify, either a DSA or RSA private key in
* PEM format. And yes, this is may seem to be a little confusing, the
* method is called "publickey" in the SSH-2 protocol specification, however
* since we need to generate a signature, you actually have to supply a
* private key =).
*
* The private key contained in the PEM file may also be encrypted * ("Proc-Type: 4,ENCRYPTED"). The library supports DES-CBC and DES-EDE3-CBC * encryption, as well as the more exotic PEM encrpytions AES-128-CBC, * AES-192-CBC and AES-256-CBC. *
* If the authentication phase is complete, true will be
* returned. If the server does not accept the request (or if further
* authentication steps are needed), false is returned and
* one can retry either by using this or any other authentication method
* (use the getRemainingAuthMethods method to get a list of
* the remaining possible methods).
*
* NOTE PUTTY USERS: Event though your key file may start with
* "-----BEGIN..." it is not in the expected format. You have to convert it
* to the OpenSSH key format by using the "puttygen" tool (can be downloaded
* from the Putty website). Simply load your key and then use the
* "Conversions/Export OpenSSH key" functionality to get a proper PEM file.
*
* @param user
* A String holding the username.
* @param pemPrivateKey
* A char[] containing a DSA or RSA private key of
* the user in OpenSSH key format (PEM, you can't miss the
* "-----BEGIN DSA PRIVATE KEY-----" or "-----BEGIN RSA PRIVATE
* KEY-----" tag). The char array may contain
* linebreaks/linefeeds.
* @param password
* If the PEM structure is encrypted ("Proc-Type: 4,ENCRYPTED")
* then you must specify a password. Otherwise, this argument
* will be ignored and can be set to null.
*
* @return whether the connection is now authenticated.
* @throws IOException
*/
public synchronized boolean authenticateWithPublicKey(String user, char[] pemPrivateKey, String password)
throws IOException
{
if (tm == null)
throw new IllegalStateException("Connection is not established!");
if (authenticated)
throw new IllegalStateException("Connection is already authenticated!");
if (am == null)
am = new AuthenticationManager(tm);
if (cm == null)
cm = new ChannelManager(tm);
if (user == null)
throw new IllegalArgumentException("user argument is null");
if (pemPrivateKey == null)
throw new IllegalArgumentException("pemPrivateKey argument is null");
authenticated = am.authenticatePublicKey(user, pemPrivateKey, password, getOrCreateSecureRND());
return authenticated;
}
/**
* After a successful connect, one has to authenticate oneself. The
* authentication method "publickey" works by signing a challenge sent by
* the server. The signature is either DSA or RSA based - it just depends on
* the type of private key you specify, either a DSA or RSA private key in
* PEM format. And yes, this is may seem to be a little confusing, the
* method is called "publickey" in the SSH-2 protocol specification, however
* since we need to generate a signature, you actually have to supply a
* private key =).
*
* If the authentication phase is complete, true will be
* returned. If the server does not accept the request (or if further
* authentication steps are needed), false is returned and
* one can retry either by using this or any other authentication method
* (use the getRemainingAuthMethods method to get a list of
* the remaining possible methods).
*
* @param user
* A String holding the username.
* @param key
* A RSAPrivateKey or DSAPrivateKey
* containing a DSA or RSA private key of
* the user in Trilead object format.
*
* @return whether the connection is now authenticated.
* @throws IOException
*/
public synchronized boolean authenticateWithPublicKey(String user, Object key)
throws IOException
{
if (tm == null)
throw new IllegalStateException("Connection is not established!");
if (authenticated)
throw new IllegalStateException("Connection is already authenticated!");
if (am == null)
am = new AuthenticationManager(tm);
if (cm == null)
cm = new ChannelManager(tm);
if (user == null)
throw new IllegalArgumentException("user argument is null");
if (key == null)
throw new IllegalArgumentException("Key argument is null");
authenticated = am.authenticatePublicKey(user, key, getOrCreateSecureRND());
return authenticated;
}
/**
* A convenience wrapper function which reads in a private key (PEM format,
* either DSA or RSA) and then calls
* authenticateWithPublicKey(String, char[], String).
*
* NOTE PUTTY USERS: Event though your key file may start with
* "-----BEGIN..." it is not in the expected format. You have to convert it
* to the OpenSSH key format by using the "puttygen" tool (can be downloaded
* from the Putty website). Simply load your key and then use the
* "Conversions/Export OpenSSH key" functionality to get a proper PEM file.
*
* @param user
* A String holding the username.
* @param pemFile
* A File object pointing to a file containing a
* DSA or RSA private key of the user in OpenSSH key format (PEM,
* you can't miss the "-----BEGIN DSA PRIVATE KEY-----" or
* "-----BEGIN RSA PRIVATE KEY-----" tag).
* @param password
* If the PEM file is encrypted then you must specify the
* password. Otherwise, this argument will be ignored and can be
* set to null.
*
* @return whether the connection is now authenticated.
* @throws IOException
*/
public synchronized boolean authenticateWithPublicKey(String user, File pemFile, String password)
throws IOException
{
if (pemFile == null)
throw new IllegalArgumentException("pemFile argument is null");
char[] buff = new char[256];
CharArrayWriter cw = new CharArrayWriter();
FileReader fr = new FileReader(pemFile);
while (true)
{
int len = fr.read(buff);
if (len < 0)
break;
cw.write(buff, 0, len);
}
fr.close();
return authenticateWithPublicKey(user, cw.toCharArray(), password);
}
/**
* Add a {@link ConnectionMonitor} to this connection. Can be invoked at any
* time, but it is best to add connection monitors before invoking
* connect() to avoid glitches (e.g., you add a connection
* monitor after a successful connect(), but the connection has died in the
* mean time. Then, your connection monitor won't be notified.)
*
* You can add as many monitors as you like.
*
* @see ConnectionMonitor
*
* @param cmon
* An object implementing the ConnectionMonitor
* interface.
*/
public synchronized void addConnectionMonitor(ConnectionMonitor cmon)
{
if (cmon == null)
throw new IllegalArgumentException("cmon argument is null");
connectionMonitors.addElement(cmon);
if (tm != null)
tm.setConnectionMonitors(connectionMonitors);
}
/**
* Controls whether compression is used on the link or not.
*
* Note: This can only be called before connect()
* @param enabled whether to enable compression
* @throws IOException
*/
public synchronized void setCompression(boolean enabled) throws IOException {
if (tm != null)
throw new IOException("Connection to " + hostname + " is already in connected state!");
compression = enabled;
}
/**
* Close the connection to the SSH-2 server. All assigned sessions will be
* closed, too. Can be called at any time. Don't forget to call this once
* you don't need a connection anymore - otherwise the receiver thread may
* run forever.
*/
public synchronized void close()
{
Throwable t = new Throwable("Closed due to user request.");
close(t, false);
}
private void close(Throwable t, boolean hard)
{
if (cm != null)
cm.closeAllChannels();
if (tm != null)
{
tm.close(t, hard == false);
tm = null;
}
am = null;
cm = null;
authenticated = false;
}
/**
* Same as
* {@link #connect(ServerHostKeyVerifier, int, int) connect(null, 0, 0)}.
*
* @return see comments for the
* {@link #connect(ServerHostKeyVerifier, int, int) connect(ServerHostKeyVerifier, int, int)}
* method.
* @throws IOException
*/
public synchronized ConnectionInfo connect() throws IOException
{
return connect(null, 0, 0);
}
/**
* Same as
* {@link #connect(ServerHostKeyVerifier, int, int) connect(verifier, 0, 0)}.
*
* @return see comments for the
* {@link #connect(ServerHostKeyVerifier, int, int) connect(ServerHostKeyVerifier, int, int)}
* method.
* @throws IOException
*/
public synchronized ConnectionInfo connect(ServerHostKeyVerifier verifier) throws IOException
{
return connect(verifier, 0, 0);
}
/**
* Connect to the SSH-2 server and, as soon as the server has presented its
* host key, use the
* {@link ServerHostKeyVerifier#verifyServerHostKey(String, int, String,
* byte[]) ServerHostKeyVerifier.verifyServerHostKey()} method of the
* verifier to ask for permission to proceed. If
* verifier is null, then any host key will
* be accepted - this is NOT recommended, since it makes man-in-the-middle
* attackes VERY easy (somebody could put a proxy SSH server between you and
* the real server).
*
* Note: The verifier will be called before doing any crypto calculations * (i.e., diffie-hellman). Therefore, if you don't like the presented host * key then no CPU cycles are wasted (and the evil server has less * information about us). *
* However, it is still possible that the server presented a fake host key: * the server cheated (typically a sign for a man-in-the-middle attack) and * is not able to generate a signature that matches its host key. Don't * worry, the library will detect such a scenario later when checking the * signature (the signature cannot be checked before having completed the * diffie-hellman exchange). *
* Note 2: The {@link ServerHostKeyVerifier#verifyServerHostKey(String, int, * String, byte[]) ServerHostKeyVerifier.verifyServerHostKey()} method will * *NOT* be called from the current thread, the call is being made from a * background thread (there is a background dispatcher thread for every * established connection). *
* Note 3: This method will block as long as the key exchange of the * underlying connection has not been completed (and you have not specified * any timeouts). *
* Note 4: If you want to re-use a connection object that was successfully
* connected, then you must call the {@link #close()} method before invoking
* connect() again.
*
* @param verifier
* An object that implements the {@link ServerHostKeyVerifier}
* interface. Pass null to accept any server host
* key - NOT recommended.
*
* @param connectTimeout
* Connect the underlying TCP socket to the server with the given
* timeout value (non-negative, in milliseconds). Zero means no
* timeout. If a proxy is being used (see
* {@link #setProxyData(ProxyData)}), then this timeout is used
* for the connection establishment to the proxy.
*
* @param kexTimeout
* Timeout for complete connection establishment (non-negative,
* in milliseconds). Zero means no timeout. The timeout counts
* from the moment you invoke the connect() method and is
* cancelled as soon as the first key-exchange round has
* finished. It is possible that the timeout event will be fired
* during the invocation of the verifier callback,
* but it will only have an effect after the
* verifier returns.
*
* @return A {@link ConnectionInfo} object containing the details of the
* established connection.
*
* @throws IOException
* If any problem occurs, e.g., the server's host key is not
* accepted by the verifier or there is problem
* during the initial crypto setup (e.g., the signature sent by
* the server is wrong).
*
* In case of a timeout (either connectTimeout or kexTimeout) a * SocketTimeoutException is thrown. *
* An exception may also be thrown if the connection was already
* successfully connected (no matter if the connection broke in
* the mean time) and you invoke connect() again
* without having called {@link #close()} first.
*
* If a HTTP proxy is being used and the proxy refuses the
* connection, then a {@link HTTPProxyException} may be thrown,
* which contains the details returned by the proxy. If the
* proxy is buggy and does not return a proper HTTP response,
* then a normal IOException is thrown instead.
*/
public synchronized ConnectionInfo connect(ServerHostKeyVerifier verifier, int connectTimeout, int kexTimeout)
throws IOException
{
final class TimeoutState
{
boolean isCancelled = false;
boolean timeoutSocketClosed = false;
}
if (tm != null)
throw new IOException("Connection to " + hostname + " is already in connected state!");
if (connectTimeout < 0)
throw new IllegalArgumentException("connectTimeout must be non-negative!");
if (kexTimeout < 0)
throw new IllegalArgumentException("kexTimeout must be non-negative!");
final TimeoutState state = new TimeoutState();
tm = new TransportManager(hostname, port);
tm.setConnectionMonitors(connectionMonitors);
// Don't offer compression if not requested
if (!compression) {
cryptoWishList.c2s_comp_algos = new String[] { "none" };
cryptoWishList.s2c_comp_algos = new String[] { "none" };
}
/*
* Make sure that the runnable below will observe the new value of "tm"
* and "state" (the runnable will be executed in a different thread,
* which may be already running, that is why we need a memory barrier
* here). See also the comment in Channel.java if you are interested in
* the details.
*
* OKOK, this is paranoid since adding the runnable to the todo list of
* the TimeoutService will ensure that all writes have been flushed
* before the Runnable reads anything (there is a synchronized block in
* TimeoutService.addTimeoutHandler).
*/
synchronized (tm)
{
/* We could actually synchronize on anything. */
}
try
{
TimeoutToken token = null;
if (kexTimeout > 0)
{
final Runnable timeoutHandler = new Runnable()
{
public void run()
{
synchronized (state)
{
if (state.isCancelled)
return;
state.timeoutSocketClosed = true;
tm.close(new SocketTimeoutException("The connect timeout expired"), false);
}
}
};
long timeoutHorizont = System.currentTimeMillis() + kexTimeout;
token = TimeoutService.addTimeoutHandler(timeoutHorizont, timeoutHandler);
}
try
{
tm.initialize(cryptoWishList, verifier, dhgexpara, connectTimeout, getOrCreateSecureRND(), proxyData);
}
catch (SocketTimeoutException se)
{
throw (SocketTimeoutException) new SocketTimeoutException(
"The connect() operation on the socket timed out.").initCause(se);
}
tm.setTcpNoDelay(tcpNoDelay);
/* Wait until first KEX has finished */
ConnectionInfo ci = tm.getConnectionInfo(1);
/* Now try to cancel the timeout, if needed */
if (token != null)
{
TimeoutService.cancelTimeoutHandler(token);
/* Were we too late? */
synchronized (state)
{
if (state.timeoutSocketClosed)
throw new IOException("This exception will be replaced by the one below =)");
/*
* Just in case the "cancelTimeoutHandler" invocation came
* just a little bit too late but the handler did not enter
* the semaphore yet - we can still stop it.
*/
state.isCancelled = true;
}
}
return ci;
}
catch (SocketTimeoutException ste)
{
throw ste;
}
catch (IOException e1)
{
/* This will also invoke any registered connection monitors */
close(new Throwable("There was a problem during connect."), false);
synchronized (state)
{
/*
* Show a clean exception, not something like "the socket is
* closed!?!"
*/
if (state.timeoutSocketClosed)
throw new SocketTimeoutException("The kexTimeout (" + kexTimeout + " ms) expired.");
}
/* Do not wrap a HTTPProxyException */
if (e1 instanceof HTTPProxyException)
throw e1;
throw (IOException) new IOException("There was a problem while connecting to " + hostname + ":" + port)
.initCause(e1);
}
}
/**
* Creates a new {@link LocalPortForwarder}. A
* LocalPortForwarder forwards TCP/IP connections that arrive
* at a local port via the secure tunnel to another host (which may or may
* not be identical to the remote SSH-2 server).
*
* This method must only be called after one has passed successfully the
* authentication step. There is no limit on the number of concurrent
* forwardings.
*
* @param local_port
* the local port the LocalPortForwarder shall bind to.
* @param host_to_connect
* target address (IP or hostname)
* @param port_to_connect
* target port
* @return A {@link LocalPortForwarder} object.
* @throws IOException
*/
public synchronized LocalPortForwarder createLocalPortForwarder(int local_port, String host_to_connect,
int port_to_connect) throws IOException
{
if (tm == null)
throw new IllegalStateException("Cannot forward ports, you need to establish a connection first.");
if (!authenticated)
throw new IllegalStateException("Cannot forward ports, connection is not authenticated.");
return new LocalPortForwarder(cm, local_port, host_to_connect, port_to_connect);
}
/**
* Creates a new {@link LocalPortForwarder}. A
* LocalPortForwarder forwards TCP/IP connections that arrive
* at a local port via the secure tunnel to another host (which may or may
* not be identical to the remote SSH-2 server).
*
* This method must only be called after one has passed successfully the
* authentication step. There is no limit on the number of concurrent
* forwardings.
*
* @param addr
* specifies the InetSocketAddress where the local socket shall
* be bound to.
* @param host_to_connect
* target address (IP or hostname)
* @param port_to_connect
* target port
* @return A {@link LocalPortForwarder} object.
* @throws IOException
*/
public synchronized LocalPortForwarder createLocalPortForwarder(InetSocketAddress addr, String host_to_connect,
int port_to_connect) throws IOException
{
if (tm == null)
throw new IllegalStateException("Cannot forward ports, you need to establish a connection first.");
if (!authenticated)
throw new IllegalStateException("Cannot forward ports, connection is not authenticated.");
return new LocalPortForwarder(cm, addr, host_to_connect, port_to_connect);
}
/**
* Creates a new {@link LocalStreamForwarder}. A
* LocalStreamForwarder manages an Input/Outputstream pair
* that is being forwarded via the secure tunnel into a TCP/IP connection to
* another host (which may or may not be identical to the remote SSH-2
* server).
*
* @param host_to_connect
* @param port_to_connect
* @return A {@link LocalStreamForwarder} object.
* @throws IOException
*/
public synchronized LocalStreamForwarder createLocalStreamForwarder(String host_to_connect, int port_to_connect)
throws IOException
{
if (tm == null)
throw new IllegalStateException("Cannot forward, you need to establish a connection first.");
if (!authenticated)
throw new IllegalStateException("Cannot forward, connection is not authenticated.");
return new LocalStreamForwarder(cm, host_to_connect, port_to_connect);
}
/**
* Creates a new {@link DynamicPortForwarder}. A
* DynamicPortForwarder forwards TCP/IP connections that arrive
* at a local port via the secure tunnel to another host that is chosen via
* the SOCKS protocol.
*
* This method must only be called after one has passed successfully the
* authentication step. There is no limit on the number of concurrent
* forwardings.
*
* @param local_port
* @return A {@link DynamicPortForwarder} object.
* @throws IOException
*/
public synchronized DynamicPortForwarder createDynamicPortForwarder(int local_port) throws IOException
{
if (tm == null)
throw new IllegalStateException("Cannot forward ports, you need to establish a connection first.");
if (!authenticated)
throw new IllegalStateException("Cannot forward ports, connection is not authenticated.");
return new DynamicPortForwarder(cm, local_port);
}
/**
* Creates a new {@link DynamicPortForwarder}. A
* DynamicPortForwarder forwards TCP/IP connections that arrive
* at a local port via the secure tunnel to another host that is chosen via
* the SOCKS protocol.
*
* This method must only be called after one has passed successfully the * authentication step. There is no limit on the number of concurrent * forwardings. * * @param addr * specifies the InetSocketAddress where the local socket shall * be bound to. * @return A {@link DynamicPortForwarder} object. * @throws IOException */ public synchronized DynamicPortForwarder createDynamicPortForwarder(InetSocketAddress addr) throws IOException { if (tm == null) throw new IllegalStateException("Cannot forward ports, you need to establish a connection first."); if (!authenticated) throw new IllegalStateException("Cannot forward ports, connection is not authenticated."); return new DynamicPortForwarder(cm, addr); } /** * Create a very basic {@link SCPClient} that can be used to copy files * from/to the SSH-2 server. *
* Works only after one has passed successfully the authentication step. * There is no limit on the number of concurrent SCP clients. *
* Note: This factory method will probably disappear in the future. * * @return A {@link SCPClient} object. * @throws IOException */ public synchronized SCPClient createSCPClient() throws IOException { if (tm == null) throw new IllegalStateException("Cannot create SCP client, you need to establish a connection first."); if (!authenticated) throw new IllegalStateException("Cannot create SCP client, connection is not authenticated."); return new SCPClient(this); } /** * Force an asynchronous key re-exchange (the call does not block). The * latest values set for MAC, Cipher and DH group exchange parameters will * be used. If a key exchange is currently in progress, then this method has * the only effect that the so far specified parameters will be used for the * next (server driven) key exchange. *
* Note: This implementation will never start a key exchange (other than the * initial one) unless you or the SSH-2 server ask for it. * * @throws IOException * In case of any failure behind the scenes. */ public synchronized void forceKeyExchange() throws IOException { if (tm == null) throw new IllegalStateException("You need to establish a connection first."); tm.forceKeyExchange(cryptoWishList, dhgexpara); } /** * Returns the hostname that was passed to the constructor. * * @return the hostname */ public synchronized String getHostname() { return hostname; } /** * Returns the port that was passed to the constructor. * * @return the TCP port */ public synchronized int getPort() { return port; } /** * Returns a {@link ConnectionInfo} object containing the details of the * connection. Can be called as soon as the connection has been established * (successfully connected). * * @return A {@link ConnectionInfo} object. * @throws IOException * In case of any failure behind the scenes. */ public synchronized ConnectionInfo getConnectionInfo() throws IOException { if (tm == null) throw new IllegalStateException( "Cannot get details of connection, you need to establish a connection first."); return tm.getConnectionInfo(1); } /** * After a successful connect, one has to authenticate oneself. This method * can be used to tell which authentication methods are supported by the * server at a certain stage of the authentication process (for the given * username). *
* Note 1: the username will only be used if no authentication step was done * so far (it will be used to ask the server for a list of possible * authentication methods by sending the initial "none" request). Otherwise, * this method ignores the user name and returns a cached method list (which * is based on the information contained in the last negative server * response). *
* Note 2: the server may return method names that are not supported by this * implementation. *
* After a successful authentication, this method must not be called
* anymore.
*
* @param user
* A String holding the username.
*
* @return a (possibly emtpy) array holding authentication method names.
* @throws IOException
*/
public synchronized String[] getRemainingAuthMethods(String user) throws IOException
{
if (user == null)
throw new IllegalArgumentException("user argument may not be NULL!");
if (tm == null)
throw new IllegalStateException("Connection is not established!");
if (authenticated)
throw new IllegalStateException("Connection is already authenticated!");
if (am == null)
am = new AuthenticationManager(tm);
if (cm == null)
cm = new ChannelManager(tm);
return am.getRemainingMethods(user);
}
/**
* Determines if the authentication phase is complete. Can be called at any
* time.
*
* @return true if no further authentication steps are
* needed.
*/
public synchronized boolean isAuthenticationComplete()
{
return authenticated;
}
/**
* Returns true if there was at least one failed authentication request and
* the last failed authentication request was marked with "partial success"
* by the server. This is only needed in the rare case of SSH-2 server
* setups that cannot be satisfied with a single successful authentication
* request (i.e., multiple authentication steps are needed.)
*
* If you are interested in the details, then have a look at RFC4252.
*
* @return if the there was a failed authentication step and the last one
* was marked as a "partial success".
*/
public synchronized boolean isAuthenticationPartialSuccess()
{
if (am == null)
return false;
return am.getPartialSuccess();
}
/**
* Checks if a specified authentication method is available. This method is
* actually just a wrapper for {@link #getRemainingAuthMethods(String)
* getRemainingAuthMethods()}.
*
* @param user
* A String holding the username.
* @param method
* An authentication method name (e.g., "publickey", "password",
* "keyboard-interactive") as specified by the SSH-2 standard.
* @return if the specified authentication method is currently available.
* @throws IOException
*/
public synchronized boolean isAuthMethodAvailable(String user, String method) throws IOException
{
if (method == null)
throw new IllegalArgumentException("method argument may not be NULL!");
String methods[] = getRemainingAuthMethods(user);
for (int i = 0; i < methods.length; i++)
{
if (methods[i].compareTo(method) == 0)
return true;
}
return false;
}
private final SecureRandom getOrCreateSecureRND()
{
if (generator == null)
generator = new SecureRandom();
return generator;
}
/**
* Open a new {@link Session} on this connection. Works only after one has
* passed successfully the authentication step. There is no limit on the
* number of concurrent sessions.
*
* @return A {@link Session} object.
* @throws IOException
*/
public synchronized Session openSession() throws IOException
{
if (tm == null)
throw new IllegalStateException("Cannot open session, you need to establish a connection first.");
if (!authenticated)
throw new IllegalStateException("Cannot open session, connection is not authenticated.");
return new Session(cm, getOrCreateSecureRND());
}
/**
* Send an SSH_MSG_IGNORE packet. This method will generate a random data
* attribute (length between 0 (invlusive) and 16 (exclusive) bytes,
* contents are random bytes).
*
* This method must only be called once the connection is established. * * @throws IOException */ public synchronized void sendIgnorePacket() throws IOException { SecureRandom rnd = getOrCreateSecureRND(); byte[] data = new byte[rnd.nextInt(16)]; rnd.nextBytes(data); sendIgnorePacket(data); } /** * Send an SSH_MSG_IGNORE packet with the given data attribute. *
* This method must only be called once the connection is established. * * @throws IOException */ public synchronized void sendIgnorePacket(byte[] data) throws IOException { if (data == null) throw new IllegalArgumentException("data argument must not be null."); if (tm == null) throw new IllegalStateException( "Cannot send SSH_MSG_IGNORE packet, you need to establish a connection first."); PacketIgnore pi = new PacketIgnore(); pi.setData(data); tm.sendMessage(pi.getPayload()); } /** * Removes duplicates from a String array, keeps only first occurence of * each element. Does not destroy order of elements; can handle nulls. Uses * a very efficient O(N^2) algorithm =) * * @param list * a String array. * @return a cleaned String array. */ private String[] removeDuplicates(String[] list) { if ((list == null) || (list.length < 2)) return list; String[] list2 = new String[list.length]; int count = 0; for (int i = 0; i < list.length; i++) { boolean duplicate = false; String element = list[i]; for (int j = 0; j < count; j++) { if (((element == null) && (list2[j] == null)) || ((element != null) && (element.equals(list2[j])))) { duplicate = true; break; } } if (duplicate) continue; list2[count++] = list[i]; } if (count == list2.length) return list2; String[] tmp = new String[count]; System.arraycopy(list2, 0, tmp, 0, count); return tmp; } /** * Unless you know what you are doing, you will never need this. * * @param ciphers */ public synchronized void setClient2ServerCiphers(String[] ciphers) { if ((ciphers == null) || (ciphers.length == 0)) throw new IllegalArgumentException(); ciphers = removeDuplicates(ciphers); BlockCipherFactory.checkCipherList(ciphers); cryptoWishList.c2s_enc_algos = ciphers; } /** * Unless you know what you are doing, you will never need this. * * @param macs */ public synchronized void setClient2ServerMACs(String[] macs) { if ((macs == null) || (macs.length == 0)) throw new IllegalArgumentException(); macs = removeDuplicates(macs); MAC.checkMacList(macs); cryptoWishList.c2s_mac_algos = macs; } /** * Sets the parameters for the diffie-hellman group exchange. Unless you * know what you are doing, you will never need this. Default values are * defined in the {@link DHGexParameters} class. * * @param dgp * {@link DHGexParameters}, non null. * */ public synchronized void setDHGexParameters(DHGexParameters dgp) { if (dgp == null) throw new IllegalArgumentException(); dhgexpara = dgp; } /** * Unless you know what you are doing, you will never need this. * * @param ciphers */ public synchronized void setServer2ClientCiphers(String[] ciphers) { if ((ciphers == null) || (ciphers.length == 0)) throw new IllegalArgumentException(); ciphers = removeDuplicates(ciphers); BlockCipherFactory.checkCipherList(ciphers); cryptoWishList.s2c_enc_algos = ciphers; } /** * Unless you know what you are doing, you will never need this. * * @param macs */ public synchronized void setServer2ClientMACs(String[] macs) { if ((macs == null) || (macs.length == 0)) throw new IllegalArgumentException(); macs = removeDuplicates(macs); MAC.checkMacList(macs); cryptoWishList.s2c_mac_algos = macs; } /** * Define the set of allowed server host key algorithms to be used for the * following key exchange operations. *
* Unless you know what you are doing, you will never need this.
*
* @param algos
* An array of allowed server host key algorithms. SSH-2 defines
* ssh-dss and ssh-rsa. The
* entries of the array must be ordered after preference, i.e.,
* the entry at index 0 is the most preferred one. You must
* specify at least one entry.
*/
public synchronized void setServerHostKeyAlgorithms(String[] algos)
{
if ((algos == null) || (algos.length == 0))
throw new IllegalArgumentException();
algos = removeDuplicates(algos);
KexManager.checkServerHostkeyAlgorithmsList(algos);
cryptoWishList.serverHostKeyAlgorithms = algos;
}
/**
* Enable/disable TCP_NODELAY (disable/enable Nagle's algorithm) on the
* underlying socket.
*
* Can be called at any time. If the connection has not yet been established
* then the passed value will be stored and set after the socket has been
* set up. The default value that will be used is false.
*
* @param enable
* the argument passed to the Socket.setTCPNoDelay()
* method.
* @throws IOException
*/
public synchronized void setTCPNoDelay(boolean enable) throws IOException
{
tcpNoDelay = enable;
if (tm != null)
tm.setTcpNoDelay(enable);
}
/**
* Used to tell the library that the connection shall be established through
* a proxy server. It only makes sense to call this method before calling
* the {@link #connect() connect()} method.
*
* At the moment, only HTTP proxies are supported. *
* Note: This method can be called any number of times. The
* {@link #connect() connect()} method will use the value set in the last
* preceding invocation of this method.
*
* @see HTTPProxyData
*
* @param proxyData
* Connection information about the proxy. If null,
* then no proxy will be used (non surprisingly, this is also the
* default).
*/
public synchronized void setProxyData(ProxyData proxyData)
{
this.proxyData = proxyData;
}
/**
* Request a remote port forwarding. If successful, then forwarded
* connections will be redirected to the given target address. You can
* cancle a requested remote port forwarding by calling
* {@link #cancelRemotePortForwarding(int) cancelRemotePortForwarding()}.
*
* A call of this method will block until the peer either agreed or * disagreed to your request- *
* Note 1: this method typically fails if you *
* Note 2: (from the openssh man page): By default, the listening socket on * the server will be bound to the loopback interface only. This may be * overriden by specifying a bind address. Specifying a remote bind address * will only succeed if the server's GatewayPorts option is enabled * (see sshd_config(5)). * * @param bindAddress * address to bind to on the server: *
* The SecureRandom instance is used during key exchanges, public key * authentication, x11 cookie generation and the like. * * @param rnd * a SecureRandom instance */ public synchronized void setSecureRandom(SecureRandom rnd) { if (rnd == null) throw new IllegalArgumentException(); this.generator = rnd; } /** * Enable/disable debug logging. Only do this when requested by Trilead * support. *
* For speed reasons, some static variables used to check whether debugging
* is enabled are not protected with locks. In other words, if you
* dynamicaly enable/disable debug logging, then some threads may still use
* the old setting. To be on the safe side, enable debugging before doing
* the connect() call.
*
* @param enable
* on/off
* @param logger
* a {@link DebugLogger DebugLogger} instance, null
* means logging using the simple logger which logs all messages
* to to stderr. Ignored if enabled is false
*/
public synchronized void enableDebugging(boolean enable, DebugLogger logger)
{
Logger.enabled = enable;
if (enable == false)
{
Logger.logger = null;
}
else
{
if (logger == null)
{
logger = new DebugLogger()
{
public void log(int level, String className, String message)
{
long now = System.currentTimeMillis();
System.err.println(now + " : " + className + ": " + message);
}
};
}
Logger.logger = logger;
}
}
/**
* This method can be used to perform end-to-end connection testing. It
* sends a 'ping' message to the server and waits for the 'pong' from the
* server.
*
* When this method throws an exception, then you can assume that the * connection should be abandoned. *
* Note: Works only after one has passed successfully the authentication * step. *
* Implementation details: this method sends a SSH_MSG_GLOBAL_REQUEST * request ('trilead-ping') to the server and waits for the * SSH_MSG_REQUEST_FAILURE reply packet from the server. * * @throws IOException * in case of any problem */ public synchronized void ping() throws IOException { if (tm == null) throw new IllegalStateException("You need to establish a connection first."); if (!authenticated) throw new IllegalStateException("The connection is not authenticated."); cm.requestGlobalTrileadPing(); } }