From 95ca3f5bd696b5450820929e1b1a444d02f0bd1e Mon Sep 17 00:00:00 2001 From: Christian Starkjohann Date: Thu, 17 Apr 2008 19:00:20 +0000 Subject: - imported new files into project --- examples/custom-class/firmware/requests.h | 32 +++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 examples/custom-class/firmware/requests.h (limited to 'examples/custom-class/firmware/requests.h') diff --git a/examples/custom-class/firmware/requests.h b/examples/custom-class/firmware/requests.h new file mode 100644 index 0000000..b6a3c2b --- /dev/null +++ b/examples/custom-class/firmware/requests.h @@ -0,0 +1,32 @@ +/* Name: requests.h + * Project: custom-class, a basic USB example + * Author: Christian Starkjohann + * Creation Date: 2008-04-09 + * Tabsize: 4 + * Copyright: (c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt) or proprietary (CommercialLicense.txt) + * This Revision: $Id$ + */ + +/* This header is shared between the firmware and the host software. It + * defines the USB request numbers (and optionally data types) used to + * communicate between the host and the device. + */ + +#ifndef __REQUESTS_H_INCLUDED__ +#define __REQUESTS_H_INCLUDED__ + +#define CUSTOM_RQ_SET_STATUS 1 +/* Set the LED status. Control-OUT. + * The requested status is passed in the "wValue" field of the control + * transfer. No OUT data is sent. Bit 0 of the low byte of wValue controls + * the LED. + */ + +#define CUSTOM_RQ_GET_STATUS 2 +/* Get the current LED status. Control-IN. + * This control transfer involves a 1 byte data phase where the device sends + * the current status to the host. The status is in bit 0 of the byte. + */ + +#endif /* __REQUESTS_H_INCLUDED__ */ -- cgit v1.2.3