From 737ac5be9743e37b80133706faf02e959e803459 Mon Sep 17 00:00:00 2001
From: inmarket <andrewh@inmarket.com.au>
Date: Mon, 28 Oct 2013 19:06:16 +1000
Subject: Create uGFX board directories which include example Makefiles.
 Currently only done for the Olimex-SAM7EX256 board.

---
 .../toggle/Pal/ginput_lld_toggle_board_template.h  | 48 ++++++++++++++++++++++
 1 file changed, 48 insertions(+)
 create mode 100644 drivers/ginput/toggle/Pal/ginput_lld_toggle_board_template.h

(limited to 'drivers/ginput/toggle/Pal/ginput_lld_toggle_board_template.h')

diff --git a/drivers/ginput/toggle/Pal/ginput_lld_toggle_board_template.h b/drivers/ginput/toggle/Pal/ginput_lld_toggle_board_template.h
new file mode 100644
index 00000000..84038d16
--- /dev/null
+++ b/drivers/ginput/toggle/Pal/ginput_lld_toggle_board_template.h
@@ -0,0 +1,48 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+/**
+ * @file    drivers/ginput/toggle/Pal/ginput_lld_toggle_board_template.h
+ * @brief   GINPUT Toggle low level driver source for the ChibiOS PAL hardware on the example board.
+ *
+ * @defgroup Toggle Toggle
+ * @ingroup GINPUT
+ * @{
+ */
+
+#ifndef _GDISP_LLD_TOGGLE_BOARD_H
+#define _GDISP_LLD_TOGGLE_BOARD_H
+
+#error "GINPUT Toggle Pal Driver: You need to define your board definitions"
+
+// The below are example values
+
+#define GINPUT_TOGGLE_NUM_PORTS			7			// The total number of toggle inputs
+#define GINPUT_TOGGLE_CONFIG_ENTRIES	2			// The total number of GToggleConfig entries
+
+#define GINPUT_TOGGLE_SW1			0				// Switch 1
+#define GINPUT_TOGGLE_SW2			1				// Switch 2
+#define GINPUT_TOGGLE_UP			2				// Joystick Up
+#define GINPUT_TOGGLE_DOWN			3				// Joystick Down
+#define GINPUT_TOGGLE_LEFT			4				// Joystick Left
+#define GINPUT_TOGGLE_RIGHT			5				// Joystick Right
+#define GINPUT_TOGGLE_CENTER		6				// Joystick Center
+
+#define GINPUT_TOGGLE_DECLARE_STRUCTURE()											\
+	const GToggleConfig GInputToggleConfigTable[GINPUT_TOGGLE_CONFIG_ENTRIES] = {	\
+		{AT91C_BASE_PIOB,								/* Switch 1 and Switch 2 */	\
+			PIOB_SW1_MASK|PIOB_SW2_MASK,											\
+			PIOB_SW1_MASK|PIOB_SW2_MASK,											\
+			PAL_MODE_INPUT},														\
+		{AT91C_BASE_PIOA,								/* B1..4 Joystick */		\
+			PIOA_B1_MASK|PIOA_B2_MASK|PIOA_B3_MASK|PIOA_B4_MASK|PIOA_B5_MASK,		\
+			PIOA_B1_MASK|PIOA_B2_MASK|PIOA_B3_MASK|PIOA_B4_MASK|PIOA_B5_MASK,		\
+			PAL_MODE_INPUT},														\
+	}
+
+#endif /* _GDISP_LLD_TOGGLE_BOARD_H */
+/** @} */
-- 
cgit v1.2.3