From 267b908689bbe82db9bd4e0f3376e77a14e4dfd9 Mon Sep 17 00:00:00 2001 From: Joel Bodenmann Date: Wed, 10 Oct 2012 10:56:04 +0200 Subject: docs --- docs/configure.txt | 61 ++++++++++++++++++++++++++++++------------------------ 1 file changed, 34 insertions(+), 27 deletions(-) (limited to 'docs/configure.txt') diff --git a/docs/configure.txt b/docs/configure.txt index 58830c2d..200c9966 100644 --- a/docs/configure.txt +++ b/docs/configure.txt @@ -1,27 +1,34 @@ -There are serval macros available to configure the behaviour of the GFX-Library. - -HAL macros: - - #define HAL_USE_GFX // enables the GDISP sub system. This is essentially needed to use the display - #define HAL_USE_TOUCHPAD // enables the TouchPad sub system. This is essentially needed to use the touchpad - - - -GDISP macors: - - #define GDISP_USE_GPIO // GDISP is connected to the MCU using GPIO interface, involves using lld_lcdWriteGPIO() and lld_lcdReadGPIO() - #define GDISP_USE_FSMC // GDISP is connected to the MCU using FSMC interface - #define GDISP_USE_SPI // GDISP is connected to the MCU using SPI interface - - #define GDISP_SCREEN_WIDTH // defines width of panel in pixels - #define GDISP_SCREEN_HEIGHT // defines height of panel in pixels - - #define GDISP_NEED_MULTITHREAD // GDISP will be accessed across different threads -> thread safe support - #define GDISP_NEED_CONTROL // must be set to TRUE if access control access to the LCD controller is needed - - -TouchPad macros: - - #define TOUCHPAD_ - - +There are serval macros available to configure the behaviour of the GFX-Library. + +HAL macros: + + #define HAL_USE_GFX // enables the GDISP sub system. This is essentially needed to use the display + #define HAL_USE_TOUCHPAD // enables the TouchPad sub system. This is essentially needed to use the touchpad + + + +GDISP macors: + + #define GDISP_USE_GPIO // GDISP is connected to the MCU using GPIO interface, involves using lld_lcdWriteGPIO() and lld_lcdReadGPIO() + #define GDISP_USE_FSMC // GDISP is connected to the MCU using FSMC interface + #define GDISP_USE_SPI // GDISP is connected to the MCU using SPI interface + + #define GDISP_SCREEN_WIDTH // defines width of panel in pixels. This is essentially needed to use the display + #define GDISP_SCREEN_HEIGHT // defines height of panel in pixels. This is essentailly needed to use the display + + #define GDISP_NEED_MULTITHREAD // GDISP will be accessed across different threads -> thread safe mode + #define GDISP_NEED_CONTROL // must be set to TRUE if controll access to the LCD controller is needed, eg for changing orientation or power mode + + + +TouchPad macros: + + #define TOUCHPAD_NEED_MULTITHREAD // TouchPad will be accessed across different threads -> thread safe mode + + #define TOUCHPAD_XY_INVERTED // output of tpReadX() and tpReadY() swapped - needed if touchpad writes swapped to touchpad controller + + #define TOUCHPAD_STORE_CALIBRATION // calibration values can be stored if set to true. Therefore tpCalibration() is not neccessary to call on each reset. involves using lld_tpWriteCalibration() and lld_tpReadCalibration() + + + + -- cgit v1.2.3