diff options
Diffstat (limited to 'src/gdisp')
-rw-r--r-- | src/gdisp/gdisp.c | 461 |
1 files changed, 326 insertions, 135 deletions
diff --git a/src/gdisp/gdisp.c b/src/gdisp/gdisp.c index 1aecd26c..25c2621d 100644 --- a/src/gdisp/gdisp.c +++ b/src/gdisp/gdisp.c @@ -50,7 +50,7 @@ GDISPControl *GDISP = &GDISP_DRIVER_STRUCT.g; #if GDISP_HARDWARE_STREAM_END #define STREAM_CLEAR() if ((GC->flags & GDISP_FLG_INSTREAM)) { \ - gdisp_lld_stream_end(); \ + gdisp_lld_stream_end(GC); \ GC->flags &= ~GDISP_FLG_INSTREAM; \ } #else @@ -71,10 +71,10 @@ GDISPControl *GDISP = &GDISP_DRIVER_STRUCT.g; #if NEED_CLIPPING static INLINE void drawpixel_clip(void) { if (GC->p.x >= GC->clipx0 && GC->p.x < GC->clipx1 && GC->p.y >= GC->clipy0 && GC->p.y < GC->clipy1) - gdisp_lld_draw_pixel(); + gdisp_lld_draw_pixel(GC); } #else - #define drawpixel_clip() gdisp_lld_draw_pixel() + #define drawpixel_clip() gdisp_lld_draw_pixel(GC) #endif #else // Worst is streaming @@ -85,10 +85,10 @@ GDISPControl *GDISP = &GDISP_DRIVER_STRUCT.g; #endif GC->cx = GC->cy = 1; - gdisp_lld_stream_start(); - gdisp_lld_stream_color(); + gdisp_lld_stream_start(GC); + gdisp_lld_stream_color(GC); #if GDISP_HARDWARE_STREAM_END - gdisp_lld_stream_end(); + gdisp_lld_stream_end(GC); #endif } #endif @@ -99,7 +99,7 @@ GDISPControl *GDISP = &GDISP_DRIVER_STRUCT.g; // Note: This is not clipped #if GDISP_HARDWARE_FILLS // Best is hardware accelerated area fill - #define fillarea() gdisp_lld_fill_area() + #define fillarea() gdisp_lld_fill_area(GC) #elif GDISP_HARDWARE_STREAM // Next best is hardware streaming static INLINE void fillarea(void) { @@ -107,11 +107,11 @@ GDISPControl *GDISP = &GDISP_DRIVER_STRUCT.g; area = (uint32_t)GC->p.cx * GC->p.cy; - gdisp_lld_stream_start(); + gdisp_lld_stream_start(GC); for(; area; area--) - gdisp_lld_stream_color(); + gdisp_lld_stream_color(GC); #if GDISP_HARDWARE_STREAM_END - gdisp_lld_stream_end(gc); + gdisp_lld_stream_end(GC); #endif } #else @@ -125,7 +125,7 @@ GDISPControl *GDISP = &GDISP_DRIVER_STRUCT.g; y1 = GC->p.y + GC->p.cy; for(; GC->p.y < y1; GC->p.y++, GC->p.x = x0) for(; GC->p.x < x1; GC->p.x++) - gdisp_lld_draw_pixel(); + gdisp_lld_draw_pixel(GC); GC->p.y = y0; } #endif @@ -164,14 +164,14 @@ static void hline_clip(void) { if (GC->p.x == GC->p.x1) { #if GDISP_HARDWARE_DRAWPIXEL // Best is hardware accelerated pixel draw - gdisp_lld_draw_pixel(); + gdisp_lld_draw_pixel(GC); #else // Worst is streaming GC->p.cx = GC->p.cy = 1; - gdisp_lld_stream_start(); - gdisp_lld_stream_color(); + gdisp_lld_stream_start(GC); + gdisp_lld_stream_color(GC); #if GDISP_HARDWARE_STREAM_END - gdisp_lld_stream_end(); + gdisp_lld_stream_end(GC); #endif #endif return; @@ -182,19 +182,19 @@ static void hline_clip(void) { // Best is hardware accelerated area fill GC->p.cx = GC->p.x1 - GC->p.x + 1; GC->p.cy = 1; - gdisp_lld_fill_area(); + gdisp_lld_fill_area(GC); #elif GDISP_HARDWARE_STREAM // Next best is streaming GC->p.cx = GC->p.x1 - GC->p.x; - gdisp_lld_stream_start(); - do { gdisp_lld_stream_color(); } while(GC->p.cx--); + gdisp_lld_stream_start(GC); + do { gdisp_lld_stream_color(GC); } while(GC->p.cx--); #if GDISP_HARDWARE_STREAM_END - gdisp_lld_stream_end(); + gdisp_lld_stream_end(GC); #endif #else // Worst is drawing pixels for(; GC->p.x <= GC->p.x1; GC->p.x++) - gdisp_lld_draw_pixel(); + gdisp_lld_draw_pixel(GC); #endif } @@ -221,14 +221,14 @@ static void vline_clip(void) { if (GC->p.y == GC->p.y1) { #if GDISP_HARDWARE_DRAWPIXEL // Best is hardware accelerated pixel draw - gdisp_lld_draw_pixel(); + gdisp_lld_draw_pixel(GC); #else // Worst is streaming GC->p.cx = GC->p.cy = 1; - gdisp_lld_stream_start(); - gdisp_lld_stream_color(); + gdisp_lld_stream_start(GC); + gdisp_lld_stream_color(GC); #if GDISP_HARDWARE_STREAM_END - gdisp_lld_stream_end(); + gdisp_lld_stream_end(GC); #endif #endif return; @@ -239,19 +239,19 @@ static void vline_clip(void) { // Best is hardware accelerated area fill GC->p.cy = GC->p.y1 - GC->p.y + 1; GC->p.cx = 1; - gdisp_lld_fill_area(); + gdisp_lld_fill_area(GC); #elif GDISP_HARDWARE_STREAM // Next best is streaming GC->p.cy = GC->p.y1 - GC->p.y; - gdisp_lld_stream_start(); - do { gdisp_lld_stream_color(); } while(GC->p.cy--); + gdisp_lld_stream_start(GC); + do { gdisp_lld_stream_color(GC); } while(GC->p.cy--); #if GDISP_HARDWARE_STREAM_END - gdisp_lld_stream_end(); + gdisp_lld_stream_end(GC); #endif #else // Worst is drawing pixels for(; GC->p.y <= GC->p.y1; GC->p.y++) - gdisp_lld_draw_pixel(); + gdisp_lld_draw_pixel(GC); #endif } @@ -342,14 +342,15 @@ void _gdispInit(void) { /* Initialise driver */ MUTEX_ENTER(); - gdisp_lld_init(); + GC->flags = 0; + gdisp_lld_init(GC); #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP #if GDISP_HARDWARE_CLIP GC->p.x = x; GC->p.y = y; GC->p.cx = cx; GC->p.cy = cy; - gdisp_lld_set_clip(); + gdisp_lld_set_clip(GC); #else GC->clipx0 = 0; GC->clipy0 = 0; @@ -360,75 +361,140 @@ void _gdispInit(void) { MUTEX_EXIT(); } -void gdispStreamStart(coord_t x, coord_t y, coord_t cx, coord_t cy) { - MUTEX_ENTER(); +#if GDISP_NEED_STREAMING + void gdispStreamStart(coord_t x, coord_t y, coord_t cx, coord_t cy) { + MUTEX_ENTER(); - #if NEED_CLIPPING - // Test if the area is valid - if not then exit - if (x < GC->clipx0 || x+cx >= GC->clipx1 || y < GC->clipy0 || y+cy >= GC->clipy1) { - MUTEX_EXIT(); - return; - } - #endif + #if NEED_CLIPPING + // Test if the area is valid - if not then exit + if (x < GC->clipx0 || x+cx >= GC->clipx1 || y < GC->clipy0 || y+cy >= GC->clipy1) { + MUTEX_EXIT(); + return; + } + #endif - GC->flags |= GDISP_FLG_INSTREAM; + GC->flags |= GDISP_FLG_INSTREAM; - #if GDISP_HARDWARE_STREAM - // Best is hardware streaming - GC->p.x = x; - GC->p.y = y; - GC->p.cx = cx; - GC->p.cy = cy; - gdisp_lld_stream_start(); - #else - // Worst - save the parameters and use pixel drawing + #if GDISP_HARDWARE_STREAM + // Best is hardware streaming + GC->p.x = x; + GC->p.y = y; + GC->p.cx = cx; + GC->p.cy = cy; + gdisp_lld_stream_start(GC); + #else + // Worst - save the parameters and use pixel drawing + + // Use x,y as the current position, x1,y1 as the save position and x2,y2 as the end position, cx = bufpos + GC->p.x1 = GC->p.x = x; + GC->p.y1 = GC->p.y = y; + GC->p.x2 = x + cx; + GC->p.y2 = y + cy; + GC->p.cx = 0; + #endif - // Use x,y as the current position, x1,y1 as the save position and x2,y2 as the end position - GC->p.x1 = GC->p.x = x; - GC->p.y1 = GC->p.y = y; - GC->p.x2 = GC->p.x + GC->p.cx; - GC->p.x2 = GC->p.x + GC->p.cx; - #endif + // Don't release the mutex as gdispStreamEnd() will do that. + } - // Don't release the mutex as gdispStreamEnd() will do that. -} + void gdispStreamColor(color_t color) { + #if !GDISP_HARDWARE_STREAM && GDISP_LINEBUF_SIZE != 0 && GDISP_HARDWARE_BITFILLS + coord_t pos, sx1, sy1, sx2; + #endif -void gdispStreamColor(color_t color) { - // Don't touch the mutex as we should already own it + // Don't touch the mutex as we should already own it - // Ignore this call if we are not streaming - if (!(GC->flags & GDISP_FLG_INSTREAM)) - return; + // Ignore this call if we are not streaming + if (!(GC->flags & GDISP_FLG_INSTREAM)) + return; - #if GDISP_HARDWARE_STREAM - // Best is hardware streaming - GC->p.color = color; - gdisp_lld_stream_color(); - #else - // Worst is using pixel drawing - GC->p.color = color; - gdisp_lld_draw_pixel(); + #if GDISP_HARDWARE_STREAM + // Best is hardware streaming + GC->p.color = color; + gdisp_lld_stream_color(GC); + #elif GDISP_LINEBUF_SIZE != 0 && GDISP_HARDWARE_BITFILLS + GC->linebuf[GC->p.cx++] = color; + if (GC->p.cx >= GDISP_LINEBUF_SIZE) { + pos = GC->p.cx; + sx1 = GC->p.x1; + sy1 = GC->p.y1; + sx2 = GC->p.x2; + GC->p.x -= pos; + GC->p.cx = pos; + GC->p.cy = 1; + GC->p.x1 = 0; + GC->p.y1 = 0; + GC->p.x2 = pos; + GC->p.ptr = (void *)GC->linebuf; + gdisp_lld_blit_area(GC); + GC->p.x1 = sx1; + GC->p.y1 = sy1; + GC->p.x2 = sx2; + GC->p.x += pos; + GC->p.cx = 0; + } - // Just wrap at end-of-line and end-of-buffer - if (++GC->p.x >= GC->p.x2) { - GC->p.x = GC->p.x1; - if (++GC->p.y >= GC->p.x2) - GC->p.y = GC->p.y1; - } - #endif -} + // Just wrap at end-of-line and end-of-buffer + if (++GC->p.x >= GC->p.x2) { + if (GC->p.cx) { + pos = GC->p.cx; + sx1 = GC->p.x1; + sy1 = GC->p.y1; + sx2 = GC->p.x2; + GC->p.x -= pos; + GC->p.cx = pos; + GC->p.cy = 1; + GC->p.x1 = 0; + GC->p.y1 = 0; + GC->p.x2 = pos; + GC->p.ptr = (void *)GC->linebuf; + gdisp_lld_blit_area(GC); + GC->p.x1 = sx1; + GC->p.y1 = sy1; + GC->p.x2 = sx2; + GC->p.cx = 0; + } + GC->p.x = GC->p.x1; + if (++GC->p.y >= GC->p.x2) + GC->p.y = GC->p.y1; + } + #else + // Worst is using pixel drawing + GC->p.color = color; + gdisp_lld_draw_pixel(GC); + + // Just wrap at end-of-line and end-of-buffer + if (++GC->p.x >= GC->p.x2) { + GC->p.x = GC->p.x1; + if (++GC->p.y >= GC->p.x2) + GC->p.y = GC->p.y1; + } + #endif + } -void gdispStreamEnd(void) { - // Only release the mutex and end the stream if we are actually streaming. - if (!(GC->flags & GDISP_FLG_INSTREAM)) - return; + void gdispStreamEnd(void) { + // Only release the mutex and end the stream if we are actually streaming. + if (!(GC->flags & GDISP_FLG_INSTREAM)) + return; - #if GDISP_HARDWARE_STREAM && GDISP_HARDWARE_STREAM_END - gdisp_lld_stream_end(); - #endif - GC->flags &= ~GDISP_FLG_INSTREAM; - MUTEX_EXIT(); -} + #if GDISP_HARDWARE_STREAM + #if GDISP_HARDWARE_STREAM_END + gdisp_lld_stream_end(GC); + #endif + #elif GDISP_LINEBUF_SIZE != 0 && GDISP_HARDWARE_BITFILLS + if (GC->p.cx) { + GC->p.x -= GC->p.cx; + GC->p.cy = 1; + GC->p.x1 = 0; + GC->p.y1 = 0; + GC->p.x2 = GC->p.cx; + GC->p.ptr = (void *)GC->linebuf; + gdisp_lld_blit_area(GC); + } + #endif + GC->flags &= ~GDISP_FLG_INSTREAM; + MUTEX_EXIT(); + } +#endif void gdispDrawPixel(coord_t x, coord_t y, color_t color) { MUTEX_ENTER(); @@ -457,14 +523,14 @@ void gdispClear(color_t color) { #if GDISP_HARDWARE_CLEARS // Best is hardware accelerated clear GC->p.color = color; - gdisp_lld_clear(); + gdisp_lld_clear(GC); #elif GDISP_HARDWARE_FILLS // Next best is hardware accelerated area fill GC->p.x = GC->p.y = 0; GC->p.cx = GC->g.Width; GC->p.cy = GC->g.Height; GC->p.color = color; - gdisp_lld_fill_area(); + gdisp_lld_fill_area(GC); #elif GDISP_HARDWARE_STREAM // Next best is streaming uint32_t area; @@ -475,18 +541,18 @@ void gdispClear(color_t color) { GC->p.color = color; area = (uint32_t)GC->p.cx * GC->p.cy; - gdisp_lld_stream_start(); + gdisp_lld_stream_start(GC); for(; area; area--) - gdisp_lld_stream_color(); + gdisp_lld_stream_color(GC); #if GDISP_HARDWARE_STREAM_END - gdisp_lld_stream_end(gc); + gdisp_lld_stream_end(GC); #endif #else // Worst is drawing pixels GC->p.color = color; for(GC->p.y = 0; GC->p.y < GC->g.Height; GC->p.y++) for(GC->p.x = 0; GC->p.x < GC->g.Width; GC->p.x++) - gdisp_lld_draw_pixel(); + gdisp_lld_draw_pixel(GC); #endif MUTEX_EXIT(); } @@ -527,7 +593,7 @@ void gdispBlitAreaEx(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, GC->p.y1 = srcy; GC->p.x2 = srccx; GC->p.ptr = (void *)buffer; - gdisp_lld_blit_area_ex(); + gdisp_lld_blit_area(GC); #elif GDISP_HARDWARE_STREAM // Next best is hardware streaming @@ -537,15 +603,15 @@ void gdispBlitAreaEx(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, srcy = y + cy; srccx -= cx; - gdisp_lld_stream_start(gc); + gdisp_lld_stream_start(GC); for(GC->p.y = y; GC->p.y < srcy; GC->p.y++, buffer += srccx) { for(GC->p.x = x; GC->p.x < srcx; GC->p.x++) { GC->p.color = *buffer++; - gdisp_lld_stream_color(); + gdisp_lld_stream_color(GC); } } #if GDISP_HARDWARE_STREAM_END - gdisp_lld_stream_end(gc); + gdisp_lld_stream_end(GC); #endif #else // Worst is drawing pixels @@ -559,7 +625,7 @@ void gdispBlitAreaEx(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, for(GC->p.y = y; GC->p.y < srcy; GC->p.y++, buffer += srccx) { for(GC->p.x=x; GC->p.x < srcx; GC->p.x++) { GC->p.color = *buffer++; - gdisp_lld_draw_pixel(); + gdisp_lld_draw_pixel(GC); } } #endif @@ -575,7 +641,7 @@ void gdispBlitAreaEx(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, GC->p.y = y; GC->p.cx = cx; GC->p.cy = cy; - gdisp_lld_set_clip(); + gdisp_lld_set_clip(GC); #else // Worst is using software clipping if (x < 0) { cx += x; x = 0; } @@ -1456,9 +1522,26 @@ void gdispBlitAreaEx(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, /* Always synchronous as it must return a value */ MUTEX_ENTER(); - GC->p.x = x; - GC->p.y = y; - c = gdisp_lld_get_pixel_color(); + #if GDISP_HARDWARE_PIXELREAD + // Best is direct pixel read + GC->p.x = x; + GC->p.y = y; + c = gdisp_lld_get_pixel_color(GC); + #elif GDISP_HARDWARE_STREAM && GDISP_HARDWARE_STREAM_READ + // Next best is hardware streaming + GC->p.x = x; + GC->p.y = y; + GC->p.cx = 1; + GC->p.cy = 1; + gdisp_lld_stream_start(GC); + c = gdisp_lld_stream_read(GC); + #if GDISP_HARDWARE_STREAM_END + gdisp_lld_stream_end(GC); + #endif + #else + // Worst is "not possible" + #error "GDISP: GDISP_NEED_PIXELREAD has been set but there is no hardware support for reading the display" + #endif MUTEX_EXIT(); return c; @@ -1467,21 +1550,127 @@ void gdispBlitAreaEx(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, #if GDISP_NEED_SCROLL void gdispVerticalScroll(coord_t x, coord_t y, coord_t cx, coord_t cy, int lines, color_t bgcolor) { + coord_t abslines; + #if !GDISP_HARDWARE_SCROLL + coord_t fy, dy, ix, fx, i, j; + #endif + MUTEX_ENTER(); #if NEED_CLIPPING if (x < GC->clipx0) { cx -= GC->clipx0 - x; x = GC->clipx0; } if (y < GC->clipy0) { cy -= GC->clipy0 - y; y = GC->clipy0; } - if (cx <= 0 || cy <= 0 || x >= GC->clipx1 || y >= GC->clipy1) { MUTEX_EXIT(); return; } + if (!lines || cx <= 0 || cy <= 0 || x >= GC->clipx1 || y >= GC->clipy1) { MUTEX_EXIT(); return; } if (x+cx > GC->clipx1) cx = GC->clipx1 - x; if (y+cy > GC->clipy1) cy = GC->clipy1 - y; #endif + + abslines = lines < 0 ? -lines : lines; + if (abslines >= cy) { + abslines = cy; + cy = 0; + } else { + #if GDISP_HARDWARE_SCROLL + GC->p.x = x; + GC->p.y = y; + GC->p.cx = cx; + GC->p.cy = cy; + GC->p.y1 = lines; + GC->p.color = bgcolor; + gdisp_lld_vertical_scroll(GC); + cy -= abslines; + #elif GDISP_LINEBUF_SIZE == 0 + #error "GDISP: GDISP_NEED_SCROLL is set but there is no hardware support and GDISP_LINEBUF_SIZE is zero." + #else + cy -= abslines; + if (lines < 0) { + fy = y+cx-1; + dy = -1; + } else { + fy = y; + dy = 1; + } + // Move the screen - one line at a time + for(i = 0; i < cy; i++, fy += dy) { + + // Handle where the buffer is smaller than a line + for(ix=0; ix < cx; ix += GDISP_LINEBUF_SIZE) { + + // Calculate the data we can move in one operation + fx = cx - ix; + if (fx > GDISP_LINEBUF_SIZE) + fx = GDISP_LINEBUF_SIZE; + + // Read one line of data from the screen + #if GDISP_HARDWARE_STREAM && GDISP_HARDWARE_STREAM_READ + // Best is hardware streaming + GC->p.x = x+ix; + GC->p.y = fy+lines; + GC->p.cx = fx; + GC->p.cy = 1; + gdisp_lld_stream_start(GC); + for(j=0; j < fx; j++) + GC->linebuf[j] = gdisp_lld_stream_read(GC); + #if GDISP_HARDWARE_STREAM_END + gdisp_lld_stream_end(GC); + #endif + #elif GDISP_HARDWARE_PIXELREAD + // Next best is single pixel reads + for(j=0; j < fx; j++) { + GC->p.x = x+ix+j; + GC->p.y = fy+lines; + GC->linebuf[j] = gdisp_lld_get_pixel_color(GC); + } + #else + // Worst is "not possible" + #error "GDISP: GDISP_NEED_SCROLL is set but there is no hardware support for scrolling or reading pixels." + #endif + + // Write that line to the new location + #if GDISP_HARDWARE_BITFILLS + // Best is hardware bitfills + GC->p.x = x+ix; + GC->p.y = fy; + GC->p.cx = fx; + GC->p.cy = 1; + GC->p.x1 = 0; + GC->p.y1 = 0; + GC->p.x2 = fx; + GC->p.ptr = (void *)GC->linebuf; + gdisp_lld_blit_area(GC); + #elif GDISP_HARDWARE_STREAM + // Next best is hardware streaming + GC->p.x = x+ix; + GC->p.y = fy; + GC->p.cx = fx; + GC->p.cy = 1; + gdisp_lld_stream_start(GC); + for(j = 0; j < fx; j++) { + GC->p.color = GC->linebuf[j]; + gdisp_lld_stream_color(GC); + } + #if GDISP_HARDWARE_STREAM_END + gdisp_lld_stream_end(GC); + #endif + #else + // Worst is drawing pixels + GC->p.y = fy; + for(GC->p.x = x+ix, j = 0; j < fx; GC->p.x++, j++) { + GC->p.color = GC->linebuf[j]; + gdisp_lld_draw_pixel(GC); + } + #endif + } + } + #endif + } + + /* fill the remaining gap */ GC->p.x = x; - GC->p.y = y; + GC->p.y = lines > 0 ? (y+cy) : y; GC->p.cx = cx; - GC->p.cy = cy; - GC->p.y1 = lines; + GC->p.cy = abslines; GC->p.color = bgcolor; - gdisp_lld_vertical_scroll(); + fillarea(); MUTEX_EXIT(); } #endif @@ -1492,7 +1681,7 @@ void gdispBlitAreaEx(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, MUTEX_ENTER(); GC->p.x = what; GC->p.ptr = value; - gdisp_lld_control(); + gdisp_lld_control(GC); #if GDISP_NEED_CLIP || GDISP_NEED_VALIDATION if (what == GDISP_CONTROL_ORIENTATION) { #if GDISP_HARDWARE_CLIP @@ -1501,7 +1690,7 @@ void gdispBlitAreaEx(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, GC->p.y = 0; GC->p.cx = GC->g.Width; GC->p.cy = GC->g.Height; - gdisp_lld_set_clip(); + gdisp_lld_set_clip(GC); #else // Worst is software clipping GC->clipx0 = 0; @@ -1529,7 +1718,7 @@ void gdispBlitAreaEx(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, MUTEX_ENTER(); GC->p.x = (coord_t)what; - res = gdisp_lld_query(); + res = gdisp_lld_query(GC); MUTEX_EXIT(); return res; } @@ -1677,42 +1866,46 @@ void gdispDrawBox(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) { #if GDISP_NEED_TEXT #include "mcufont.h" - #if GDISP_NEED_ANTIALIAS && GDISP_NEED_PIXELREAD + #if GDISP_NEED_ANTIALIAS && GDISP_HARDWARE_PIXELREAD static void drawcharline(int16_t x, int16_t y, uint8_t count, uint8_t alpha, void *state) { - if (y < GC->t.clipy0 || y >= GC->t.clipy1 || x < GC->t.clipx0 || x+count > GC->t.clipx1) return; + #define GD ((GDISPDriver *)state) + if (y < GD->t.clipy0 || y >= GD->t.clipy1 || x < GD->t.clipx0 || x+count > GD->t.clipx1) return; if (alpha == 255) { - GC->p.x = x; GC->p.y = y; GC->p.x1 = x+count-1; GC->p.color = GC->t.color; + GD->p.x = x; GD->p.y = y; GD->p.x1 = x+count-1; GD->p.color = GD->t.color; hline_clip(); } else { for (; count; count--, x++) { - GC->p.x = x; GC->p.y = y; - GC->p.color = gdispBlendColor(GC->t.color, gdisp_lld_get_pixel_color(), alpha); + GD->p.x = x; GD->p.y = y; + GD->p.color = gdispBlendColor(GD->t.color, gdisp_lld_get_pixel_color(GD), alpha); drawpixel_clip(); } } + #undef GD } #else static void drawcharline(int16_t x, int16_t y, uint8_t count, uint8_t alpha, void *state) { - (void) state; - if (y < GC->t.clipy0 || y >= GC->t.clipy1 || x < GC->t.clipx0 || x+count > GC->t.clipx1) return; + #define GD ((GDISPDriver *)state) + if (y < GD->t.clipy0 || y >= GD->t.clipy1 || x < GD->t.clipx0 || x+count > GD->t.clipx1) return; if (alpha > 0x80) { // A best approximation when using anti-aliased fonts but we can't actually draw them anti-aliased - GC->p.x = x; GC->p.y = y; GC->p.x1 = x+count-1; GC->p.color = GC->t.color; + GD->p.x = x; GD->p.y = y; GD->p.x1 = x+count-1; GD->p.color = GD->t.color; hline_clip(); } + #undef GD } #endif #if GDISP_NEED_ANTIALIAS static void fillcharline(int16_t x, int16_t y, uint8_t count, uint8_t alpha, void *state) { - (void) state; - if (y < GC->t.clipy0 || y >= GC->t.clipy1 || x < GC->t.clipx0 || x+count > GC->t.clipx1) return; + #define GD ((GDISPDriver *)state) + if (y < GD->t.clipy0 || y >= GD->t.clipy1 || x < GD->t.clipx0 || x+count > GD->t.clipx1) return; if (alpha == 255) { - GC->p.color = GC->t.color; + GD->p.color = GD->t.color; } else { - GC->p.color = gdispBlendColor(GC->t.color, GC->t.bgcolor, alpha); + GD->p.color = gdispBlendColor(GD->t.color, GD->t.bgcolor, alpha); } - GC->p.x = x; GC->p.y = y; GC->p.x1 = x+count-1; + GD->p.x = x; GD->p.y = y; GD->p.x1 = x+count-1; hline_clip(); + #undef GD } #else #define fillcharline drawcharline @@ -1720,14 +1913,12 @@ void gdispDrawBox(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) { /* Callback to render characters. */ static uint8_t drawcharglyph(int16_t x, int16_t y, mf_char ch, void *state) { - (void) state; - return mf_render_character(GC->t.font, x, y, ch, drawcharline, 0); + return mf_render_character(GC->t.font, x, y, ch, drawcharline, state); } /* Callback to render characters. */ static uint8_t fillcharglyph(int16_t x, int16_t y, mf_char ch, void *state) { - (void) state; - return mf_render_character(GC->t.font, x, y, ch, fillcharline, 0); + return mf_render_character(GC->t.font, x, y, ch, fillcharline, state); } void gdispDrawChar(coord_t x, coord_t y, uint16_t c, font_t font, color_t color) { @@ -1738,7 +1929,7 @@ void gdispDrawBox(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) { GC->t.clipx1 = x + mf_character_width(font, c) + font->baseline_x; GC->t.clipy1 = y + font->height; GC->t.color = color; - mf_render_character(font, x, y, c, drawcharline, 0); + mf_render_character(font, x, y, c, drawcharline, GC); MUTEX_EXIT(); } @@ -1756,7 +1947,7 @@ void gdispDrawBox(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) { TEST_CLIP_AREA(GC->p.x, GC->p.y, GC->p.cx, GC->p.cy) { fillarea(); - mf_render_character(font, x, y, c, fillcharline, 0); + mf_render_character(font, x, y, c, fillcharline, GC); } MUTEX_EXIT(); } @@ -1770,7 +1961,7 @@ void gdispDrawBox(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) { GC->t.clipy1 = y + font->height; GC->t.color = color; - mf_render_aligned(font, x+font->baseline_x, y, MF_ALIGN_LEFT, str, 0, drawcharglyph, 0); + mf_render_aligned(font, x+font->baseline_x, y, MF_ALIGN_LEFT, str, 0, drawcharglyph, GC); MUTEX_EXIT(); } @@ -1788,7 +1979,7 @@ void gdispDrawBox(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) { TEST_CLIP_AREA(GC->p.x, GC->p.y, GC->p.cx, GC->p.cy) { fillarea(); - mf_render_aligned(font, x+font->baseline_x, y, MF_ALIGN_LEFT, str, 0, fillcharglyph, 0); + mf_render_aligned(font, x+font->baseline_x, y, MF_ALIGN_LEFT, str, 0, fillcharglyph, GC); } MUTEX_EXIT(); } @@ -1816,7 +2007,7 @@ void gdispDrawBox(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) { } y += (cy+1 - font->height)/2; - mf_render_aligned(font, x, y, justify, str, 0, drawcharglyph, 0); + mf_render_aligned(font, x, y, justify, str, 0, drawcharglyph, GC); MUTEX_EXIT(); } @@ -1852,7 +2043,7 @@ void gdispDrawBox(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) { y += (cy+1 - font->height)/2; /* Render */ - mf_render_aligned(font, x, y, justify, str, 0, fillcharglyph, 0); + mf_render_aligned(font, x, y, justify, str, 0, fillcharglyph, GC); } MUTEX_EXIT(); } |