diff options
Diffstat (limited to 'boards/base/FireBull-STM32F103-FB')
-rw-r--r-- | boards/base/FireBull-STM32F103-FB/board_SSD1289_firebullstm32f103.h | 124 | ||||
-rw-r--r-- | boards/base/FireBull-STM32F103-FB/ginput_lld_mouse_board_firebull_stm32f103.h | 56 |
2 files changed, 0 insertions, 180 deletions
diff --git a/boards/base/FireBull-STM32F103-FB/board_SSD1289_firebullstm32f103.h b/boards/base/FireBull-STM32F103-FB/board_SSD1289_firebullstm32f103.h deleted file mode 100644 index 99001e07..00000000 --- a/boards/base/FireBull-STM32F103-FB/board_SSD1289_firebullstm32f103.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -// For a multiple display configuration we would put all this in a structure and then -// set g->board to that structure. -#define SET_CS palSetPad(GPIOD, 12); -#define CLR_CS palClearPad(GPIOD, 12); -#define SET_RS palSetPad(GPIOD, 13); -#define CLR_RS palClearPad(GPIOD, 13); -#define SET_WR palSetPad(GPIOD, 14); -#define CLR_WR palClearPad(GPIOD, 14); -#define SET_RD palSetPad(GPIOD, 15); -#define CLR_RD palClearPad(GPIOD, 15); - -static inline void init_board(GDisplay *g) -{ - - // As we are not using multiple displays we set g->board to NULL as we don't use it. - g->board = 0; - - switch(g->controllerdisplay) { - case 0: // Set up for Display 0 - palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOD, 12, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOD, 13, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOD, 14, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOD, 15, PAL_MODE_OUTPUT_PUSHPULL); - - // Configure the pins to a well know state - SET_RS; - SET_RD; - SET_WR; - CLR_CS; - - break; - } -} - -static inline void post_init_board(GDisplay *g) -{ - (void) g; -} - -static inline void setpin_reset(GDisplay *g, bool_t state) -{ - (void) g; - (void) state; - - /* Nothing to do here - reset pin tied to Vcc */ -} - -static inline void set_backlight(GDisplay *g, uint8_t percent) -{ - (void) g; - (void) percent; - - /* Nothing to do here - Backlight always on */ -} - -static inline void acquire_bus(GDisplay *g) -{ - (void) g; -} - -static inline void release_bus(GDisplay *g) -{ - (void) g; -} - -static inline void write_index(GDisplay *g, uint16_t index) -{ - (void) g; - - palWritePort(GPIOE, index); - CLR_RS; - CLR_WR; - SET_WR; - SET_RS; -} - -static inline void write_data(GDisplay *g, uint16_t data) -{ - (void) g; - - palWritePort(GPIOE, data); - CLR_WR; - SET_WR; -} - -static inline void setreadmode(GDisplay *g) -{ - (void) g; - - // change pin mode to digital input - palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_INPUT); - CLR_RD; -} - -static inline void setwritemode(GDisplay *g) -{ - (void) g; - - // change pin mode back to digital output - SET_RD; - palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL); -} - -static inline uint16_t read_data(GDisplay *g) { - return palReadPort(GPIOE); -} - -#if defined(GDISP_USE_DMA) - #error "GDISP - SSD1289: The GPIO interface does not support DMA" -#endif - -#endif /* _GDISP_LLD_BOARD_H */ - diff --git a/boards/base/FireBull-STM32F103-FB/ginput_lld_mouse_board_firebull_stm32f103.h b/boards/base/FireBull-STM32F103-FB/ginput_lld_mouse_board_firebull_stm32f103.h deleted file mode 100644 index 102bd834..00000000 --- a/boards/base/FireBull-STM32F103-FB/ginput_lld_mouse_board_firebull_stm32f103.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GINPUT_LLD_MOUSE_BOARD_H -#define _GINPUT_LLD_MOUSE_BOARD_H - -static const SPIConfig spicfg = { - NULL, - GPIOC, - 6, - /* SPI_CR1_BR_2 |*/ SPI_CR1_BR_1 | SPI_CR1_BR_0, -}; - -static inline void init_board(void) -{ - spiStart(&SPID1, &spicfg); -} - -static inline bool_t getpin_pressed(void) -{ - return (!palReadPad(GPIOC, 4)); -} - -static inline void aquire_bus(void) -{ - spiAcquireBus(&SPID1); - palClearPad(GPIOC, 6); -} - -static inline void release_bus(void) -{ - palSetPad(GPIOC, 6); - spiReleaseBus(&SPID1); -} - -static inline uint16_t read_value(uint16_t port) -{ - static uint8_t txbuf[3] = {0}; - static uint8_t rxbuf[3] = {0}; - uint16_t ret; - - txbuf[0] = port; - - spiExchange(&SPID1, 3, txbuf, rxbuf); - - ret = (rxbuf[1] << 5) | (rxbuf[2] >> 3); - - return ret; -} - -#endif /* _GINPUT_LLD_MOUSE_BOARD_H */ - |