/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage USB LED Notifier Project * * \section SSec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * - AT90USB646 * * \section SSec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard
Usable Speeds:Full Speed Mode
* * \section SSec_Description Project Description: * * USB LED Notifier Project. This project is designed for the Busware BUI board, however it can run easily on any * USB AVR. It is a generic RGB LED controller (via a three channel software PWM) which listens for commands from the * host on a CDC virtual serial port. When new commands are received, it updates the board LEDs. * * This can be controlled with any host application that can write to the virtual serial port, allowing it to become * a visual notification system for any number of custom host applications, such as a new unread email notifier. * * \section SSec_Options Project Options * * The following defines can be found in this project, which can control the project behavior when defined, or changed in value. * * * * * *
* None *
*/