/* LUFA Library Copyright (C) Dean Camera, 2009. dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that the copyright notice and this permission notice and warranty disclaimer appear in supporting documentation, and that the name of the author not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this software, including all implied warranties of merchantability and fitness. In no event shall the author be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of this software. */ /** \file * * Header file for PDITarget.c. */ #ifndef _PDI_TARGET_ #define _PDI_TARGET_ /* Includes: */ #include #include #include #include /* Preprocessor Checks: */ #if (BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1) #undef ENABLE_ISP_PROTOCOL #if !defined(ENABLE_PDI_PROTOCOL) #define ENABLE_PDI_PROTOCOL #endif #endif /* Defines: */ #if BOARD == BOARD_XPLAIN #define PDI_VIA_HARDWARE_USART #else #define BITBANG_PDIDATA_PORT PORTB #define BITBANG_PDIDATA_DDR DDRB #define BITBANG_PDIDATA_PIN PINB #define BITBANG_PDIDATA_MASK (1 << 3) #define BITBANG_PDICLOCK_PORT RESET_LINE_PORT #define BITBANG_PDICLOCK_DDR RESET_LINE_DDR #define BITBANG_PDICLOCK_PIN RESET_LINE_PIN #define BITBANG_PDICLOCK_MASK RESET_LINE_MASK #endif #define BITS_IN_FRAME 12 #define PDI_CMD_LDS 0x00 #define PDI_CMD_LD 0x20 #define PDI_CMD_STS 0x40 #define PDI_CMD_ST 0x60 #define PDI_CMD_LDCS 0x80 #define PDI_CMD_REPEAT 0xA0 #define PDI_CMD_STCS 0xC0 #define PDI_CMD_KEY 0xE0 #define PDI_STATUS_REG 0 #define PDI_RESET_REG 1 #define PDI_CTRL_REG 2 #define PDI_STATUS_NVM (1 << 1) #define PDI_RESET_KEY 0x59 #define PDI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF} #define PDI_DATSIZE_1BYTE 0 #define PDI_DATSIZE_2BYTES 1 #define PDI_DATSIZE_3BYTES 2 #define PDI_DATSIZE_4BYTES 3 #define PDI_POINTER_INDIRECT 0 #define PDI_POINTER_INDIRECT_PI 1 #define PDI_POINTER_DIRECT 2 #define FLASH_BASE 0x00800000 #define EPPROM_BASE 0x008C0000 #define FUSE_BASE 0x008F0020 #define DATAMEM_BASE 0x01000000 #define PROD_SIGNATURE_BASE 0x008E0200 #define USER_SIGNATURE_BASE 0x008E0400 #define DATAMEM_NVM_BASE 0x01C0 #define DATAMEM_NVM_ADDR0 (DATAMEM_NVM_BASE | 0x00) #define DATAMEM_NVM_ADDR1 (DATAMEM_NVM_BASE | 0x01) #define DATAMEM_NVM_ADDR2 (DATAMEM_NVM_BASE | 0x02) #define DATAMEM_NVM_DAT0 (DATAMEM_NVM_BASE | 0x04) #define DATAMEM_NVM_DAT1 (DATAMEM_NVM_BASE | 0x05) #define DATAMEM_NVM_DAT2 (DATAMEM_NVM_BASE | 0x06) #define DATAMEM_NVM_CMD (DATAMEM_NVM_BASE | 0x0A) #define DATAMEM_NVM_CTRLA (DATAMEM_NVM_BASE | 0x0B) #define DATAMEM_NVM_CTRLB (DATAMEM_NVM_BASE | 0x0C) #define DATAMEM_NVM_INTCTRL (DATAMEM_NVM_BASE | 0x0D) #define DATAMEM_NVM_STATUS (DATAMEM_NVM_BASE | 0x0F) #define DATAMEM_NVM_LOCKBITS (DATAMEM_NVM_BASE | 0x10) #define NVM_CMD_APPCRC 0x38 #define NVM_CMD_BOOTCRC 0x39 #define NVM_CMD_FLASHCRC 0x78 #define NVM_CMD_READUSERSIG 0x03 /* Function Prototypes: */ void PDITarget_EnableTargetPDI(void); void PDITarget_DisableTargetPDI(void); void PDITarget_SendByte(uint8_t Byte); uint8_t PDITarget_ReceiveByte(void); void PDITarget_SendBreak(void); void PDITarget_SendAddress(uint32_t Address); bool PDITarget_WaitWhileNVMBusBusy(void); void PDITarget_WaitWhileNVMControllerBusy(void); #endif