/* LUFA Library Copyright (C) Dean Camera, 2009. dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that the copyright notice and this permission notice and warranty disclaimer appear in supporting documentation, and that the name of the author not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this software, including all implied warranties of merchantability and fitness. In no event shall the author be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of this software. */ #if defined(ENABLE_PDI_PROTOCOL) || defined(__DOXYGEN__) /** \file * * Target-related functions for the PDI Protocol decoder. */ #define INCLUDE_FROM_PDITARGET_C #include "PDITarget.h" /** Writes a given byte to the attached XMEGA device, using a RS232 frame via software through the * PDI interface. * * \param[in] Byte Byte to send to the attached device */ void PDITarget_SendByte(uint8_t Byte) { uint8_t LogicOneBits = 0; // One Start Bit PDIDATA_LINE_PORT &= ~PDIDATA_LINE_MASK; TOGGLE_PDI_CLOCK; // Eight Data Bits for (uint8_t i = 0; i < 8; i++) { if (Byte & 0x01) { PDIDATA_LINE_PORT &= ~PDIDATA_LINE_MASK; LogicOneBits++; } else { PDIDATA_LINE_PORT |= PDIDATA_LINE_MASK; } Byte >>= 1; TOGGLE_PDI_CLOCK; } // Even Parity Bit if (LogicOneBits & 0x01) PDIDATA_LINE_PORT &= ~PDIDATA_LINE_MASK; else PDIDATA_LINE_PORT |= PDIDATA_LINE_MASK; TOGGLE_PDI_CLOCK; // Two Stop Bits PDIDATA_LINE_PORT |= PDIDATA_LINE_MASK; TOGGLE_PDI_CLOCK; TOGGLE_PDI_CLOCK; } /** Reads a given byte from the attached XMEGA device, encoded in a RS232 frame through the PDI interface. * * \return Received byte from the attached device */ uint8_t PDITarget_ReceiveByte(void) { uint8_t ReceivedByte = 0; PDIDATA_LINE_DDR &= ~PDIDATA_LINE_MASK; // One Start Bit while (PDIDATA_LINE_PIN & PDIDATA_LINE_MASK); TOGGLE_PDI_CLOCK; TOGGLE_PDI_CLOCK; // Eight Data Bits for (uint8_t i = 0; i < 8; i++) { if (!(PDIDATA_LINE_PIN & PDIDATA_LINE_MASK)) ReceivedByte |= 0x80; ReceivedByte >>= 1; TOGGLE_PDI_CLOCK; } // Even Parity Bit (discarded) TOGGLE_PDI_CLOCK; // Two Stop Bits TOGGLE_PDI_CLOCK; TOGGLE_PDI_CLOCK; PDIDATA_LINE_DDR |= PDIDATA_LINE_MASK; return ReceivedByte; } #endif